Total
577 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-11011 | 1 Behaviortree | 1 Behaviortree | 2025-10-16 | 3.3 Low |
| A vulnerability was found in BehaviorTree up to 4.7.0. Affected by this issue is the function JsonExporter::fromJson of the file /src/json_export.cpp. Performing manipulation of the argument Source results in null pointer dereference. The attack needs to be approached locally. The exploit has been made public and could be used. The patch is named 4b23dcaf0ce951a31299ebdd61df69f9ce99a76d. It is suggested to install a patch to address this issue. | ||||
| CVE-2025-11013 | 1 Behaviortree | 1 Behaviortree | 2025-10-16 | 3.3 Low |
| A vulnerability was identified in BehaviorTree up to 4.7.0. This vulnerability affects the function XMLParser::PImpl::loadDocImpl of the file /src/xml_parsing.cpp of the component XML Parser. The manipulation leads to null pointer dereference. The attack can only be performed from a local environment. The exploit is publicly available and might be used. | ||||
| CVE-2025-47148 | 2025-10-16 | 6.5 Medium | ||
| When the BIG-IP system is configured as both a Security Assertion Markup Language (SAML) service provider (SP) and Identity Provider (IdP), with single logout (SLO) enabled on an access policy, undisclosed requests can cause an increase in memory resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. | ||||
| CVE-2025-11638 | 2025-10-16 | 4.3 Medium | ||
| A flaw has been found in Tomofun Furbo 360 and Furbo Mini. The affected element is an unknown function of the component Bluetooth Handler. Executing manipulation can lead to denial of service. The attacker needs to be present on the local network. The firmware versions determined to be affected are Furbo 360 up to FB0035_FW_036 and Furbo Mini up to MC0020_FW_074. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-11635 | 2025-10-16 | 4.3 Medium | ||
| A weakness has been identified in Tomofun Furbo 360 up to FB0035_FW_036. This vulnerability affects unknown code of the component File Upload. This manipulation causes resource consumption. Remote exploitation of the attack is possible. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-9784 | 1 Redhat | 15 Apache Camel Hawtio, Build Of Apache Camel For Spring Boot, Camel Spring Boot and 12 more | 2025-10-15 | 7.5 High |
| A flaw was found in Undertow where malformed client requests can trigger server-side stream resets without triggering abuse counters. This issue, referred to as the "MadeYouReset" attack, allows malicious clients to induce excessive server workload by repeatedly causing server-side stream aborts. While not a protocol bug, this highlights a common implementation weakness that can be exploited to cause a denial of service (DoS). | ||||
| CVE-2025-11550 | 1 Tenda | 1 W12 | 2025-10-14 | 6.5 Medium |
| A vulnerability was found in Tenda W12 3.0.0.6(3948). The impacted element is the function wifiScheduledSet of the file /goform/modules of the component HTTP Request Handler. The manipulation of the argument wifiScheduledSet results in null pointer dereference. The attack may be performed from remote. The exploit has been made public and could be used. | ||||
| CVE-2025-11642 | 2025-10-14 | 4 Medium | ||
| A vulnerability was identified in Tomofun Furbo 360 and Furbo Mini. Affected is an unknown function of the component Registration Handler. Such manipulation leads to denial of service. The attack can be executed directly on the physical device. The attack requires a high level of complexity. The exploitability is told to be difficult. The firmware versions determined to be affected are Furbo 360 up to FB0035_FW_036 and Furbo Mini up to MC0020_FW_074. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-0704 | 1 Joeybling | 1 Bootplus | 2025-10-10 | 5.3 Medium |
| A vulnerability, which was classified as problematic, was found in JoeyBling bootplus up to 247d5f6c209be1a5cf10cd0fa18e1d8cc63cf55d. Affected is the function qrCode of the file src/main/java/io/github/controller/QrCodeController.java. The manipulation of the argument w/h leads to resource consumption. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. | ||||
| CVE-2025-9649 | 2 Appneta, Broadcom | 2 Tcpreplay, Tcpreplay | 2025-10-09 | 3.3 Low |
| A security vulnerability has been detected in appneta tcpreplay 4.5.1. Impacted is the function calc_sleep_time of the file send_packets.c. Such manipulation leads to divide by zero. An attack has to be approached locally. The exploit has been disclosed publicly and may be used. Upgrading to version 4.5.3-beta3 is recommended to address this issue. It is advisable to upgrade the affected component. The vendor confirms in a GitHub issue reply: "Was able to reproduce in 6fcbf03 but NOT 4.5.3-beta3." | ||||
| CVE-2025-11017 | 2 Ogre3d, Ogrecave | 2 Ogre, Ogre | 2025-10-08 | 3.3 Low |
| A vulnerability was detected in OGRECave Ogre up to 14.4.1. The impacted element is the function Ogre::LogManager::stream of the file /ogre/OgreMain/src/OgreLogManager.cpp. Performing manipulation of the argument mDefaultLog results in null pointer dereference. The attack must be initiated from a local position. The exploit is now public and may be used. | ||||
| CVE-2024-56545 | 1 Linux | 1 Linux Kernel | 2025-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: hyperv: streamline driver probe to avoid devres issues It was found that unloading 'hid_hyperv' module results in a devres complaint: ... hv_vmbus: unregistering driver hid_hyperv ------------[ cut here ]------------ WARNING: CPU: 2 PID: 3983 at drivers/base/devres.c:691 devres_release_group+0x1f2/0x2c0 ... Call Trace: <TASK> ? devres_release_group+0x1f2/0x2c0 ? __warn+0xd1/0x1c0 ? devres_release_group+0x1f2/0x2c0 ? report_bug+0x32a/0x3c0 ? handle_bug+0x53/0xa0 ? exc_invalid_op+0x18/0x50 ? asm_exc_invalid_op+0x1a/0x20 ? devres_release_group+0x1f2/0x2c0 ? devres_release_group+0x90/0x2c0 ? rcu_is_watching+0x15/0xb0 ? __pfx_devres_release_group+0x10/0x10 hid_device_remove+0xf5/0x220 device_release_driver_internal+0x371/0x540 ? klist_put+0xf3/0x170 bus_remove_device+0x1f1/0x3f0 device_del+0x33f/0x8c0 ? __pfx_device_del+0x10/0x10 ? cleanup_srcu_struct+0x337/0x500 hid_destroy_device+0xc8/0x130 mousevsc_remove+0xd2/0x1d0 [hid_hyperv] device_release_driver_internal+0x371/0x540 driver_detach+0xc5/0x180 bus_remove_driver+0x11e/0x2a0 ? __mutex_unlock_slowpath+0x160/0x5e0 vmbus_driver_unregister+0x62/0x2b0 [hv_vmbus] ... And the issue seems to be that the corresponding devres group is not allocated. Normally, devres_open_group() is called from __hid_device_probe() but Hyper-V HID driver overrides 'hid_dev->driver' with 'mousevsc_hid_driver' stub and basically re-implements __hid_device_probe() by calling hid_parse() and hid_hw_start() but not devres_open_group(). hid_device_probe() does not call __hid_device_probe() for it. Later, when the driver is removed, hid_device_remove() calls devres_release_group() as it doesn't check whether hdev->driver was initially overridden or not. The issue seems to be related to the commit 62c68e7cee33 ("HID: ensure timely release of driver-allocated resources") but the commit itself seems to be correct. Fix the issue by dropping the 'hid_dev->driver' override and using hid_register_driver()/hid_unregister_driver() instead. Alternatively, it would have been possible to rely on the default handling but HID_CONNECT_DEFAULT implies HID_CONNECT_HIDRAW and it doesn't seem to work for mousevsc as-is. | ||||
| CVE-2025-9384 | 2 Appneta, Broadcom | 2 Tcpreplay, Tcpreplay | 2025-10-06 | 3.3 Low |
| A vulnerability was detected in appneta tcpreplay up to 4.5.1. Impacted is the function tcpedit_post_args of the file /src/tcpedit/parse_args.c. The manipulation results in null pointer dereference. The attack is only possible with local access. The exploit is now public and may be used. Upgrading to version 4.5.2-beta2 is recommended to address this issue. Upgrading the affected component is advised. The vendor explains, that he was "[a]ble to reproduce in 6fcbf03 but not in 4.5.2-beta2". | ||||
| CVE-2025-7797 | 1 Gpac | 1 Gpac | 2025-10-03 | 5.3 Medium |
| A vulnerability was found in GPAC up to 2.4. It has been rated as problematic. Affected by this issue is the function gf_dash_download_init_segment of the file src/media_tools/dash_client.c. The manipulation of the argument base_init_url leads to null pointer dereference. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The patch is identified as 153ea314b6b053db17164f8bc3c7e1e460938eaa. It is recommended to apply a patch to fix this issue. | ||||
| CVE-2025-4533 | 1 Guojusoft | 1 Jeecgboot | 2025-10-02 | 2.7 Low |
| A vulnerability classified as problematic was found in JeecgBoot up to 3.8.0. This vulnerability affects the function unzipFile of the file /jeecg-boot/airag/knowledge/doc/import/zip of the component Document Library Upload. The manipulation of the argument File leads to resource consumption. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2024-50189 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: Switch to device-managed dmam_alloc_coherent() Using the device-managed version allows to simplify clean-up in probe() error path. Additionally, this device-managed ensures proper cleanup, which helps to resolve memory errors, page faults, btrfs going read-only, and btrfs disk corruption. | ||||
| CVE-2024-56757 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: mediatek: add intf release flow when usb disconnect MediaTek claim an special usb intr interface for ISO data transmission. The interface need to be released before unregistering hci device when usb disconnect. Removing BT usb dongle without properly releasing the interface may cause Kernel panic while unregister hci device. | ||||
| CVE-2024-53202 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firmware_loader: Fix possible resource leak in fw_log_firmware_info() The alg instance should be released under the exception path, otherwise there may be resource leak here. To mitigate this, free the alg instance with crypto_free_shash when kmalloc fails. | ||||
| CVE-2025-9165 | 1 Libtiff | 1 Libtiff | 2025-10-01 | 2.5 Low |
| A flaw has been found in LibTIFF 4.7.0. This affects the function _TIFFmallocExt/_TIFFCheckRealloc/TIFFHashSetNew/InitCCITTFax3 of the file tools/tiffcmp.c of the component tiffcmp. Executing manipulation can lead to memory leak. The attack is restricted to local execution. This attack is characterized by high complexity. It is indicated that the exploitability is difficult. The exploit has been published and may be used. There is ongoing doubt regarding the real existence of this vulnerability. This patch is called ed141286a37f6e5ddafb5069347ff5d587e7a4e0. It is best practice to apply a patch to resolve this issue. A researcher disputes the security impact of this issue, because "this is a memory leak on a command line tool that is about to exit anyway". In the reply the project maintainer declares this issue as "a simple 'bug' when leaving the command line tool and (...) not a security issue at all". | ||||
| CVE-2025-5702 | 2 Gnu, Redhat | 2 Glibc, Enterprise Linux | 2025-10-01 | 5.6 Medium |
| The strcmp implementation optimized for the Power10 processor in the GNU C Library version 2.39 and later writes to vector registers v20 to v31 without saving contents from the caller (those registers are defined as non-volatile registers by the powerpc64le ABI), resulting in overwriting of its contents and potentially altering control flow of the caller, or leaking the input strings to the function to other parts of the program. | ||||