Total
14203 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2020-3191 | 1 Cisco | 26 Adaptive Security Appliance Software, Asa 5505, Asa 5505 Firmware and 23 more | 2026-08-11 | 8.6 High |
| A vulnerability in DNS over IPv6 packet processing for Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to improper length validation of a field in an IPv6 DNS packet. An attacker could exploit this vulnerability by sending a crafted DNS query over IPv6, which traverses the affected device. An exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. This vulnerability is specific to DNS over IPv6 traffic only. | ||||
| CVE-2020-3452 | 1 Cisco | 14 Adaptive Security Appliance Software, Asa 5505, Asa 5510 and 11 more | 2026-08-11 | 7.5 High |
| A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to conduct directory traversal attacks and read sensitive files on a targeted system. The vulnerability is due to a lack of proper input validation of URLs in HTTP requests processed by an affected device. An attacker could exploit this vulnerability by sending a crafted HTTP request containing directory traversal character sequences to an affected device. A successful exploit could allow the attacker to view arbitrary files within the web services file system on the targeted device. The web services file system is enabled when the affected device is configured with either WebVPN or AnyConnect features. This vulnerability cannot be used to obtain access to ASA or FTD system files or underlying operating system (OS) files. | ||||
| CVE-2020-3571 | 1 Cisco | 9 Firepower 4110, Firepower 4112, Firepower 4115 and 6 more | 2026-08-11 | 8.6 High |
| A vulnerability in the ICMP ingress packet processing of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 4110 appliances could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incomplete input validation upon receiving ICMP packets. An attacker could exploit this vulnerability by sending a high number of crafted ICMP or ICMPv6 packets to an affected device. A successful exploit could allow the attacker to cause a memory exhaustion condition that may result in an unexpected reload. No manual intervention is needed to recover the device after the reload. | ||||
| CVE-2021-1402 | 1 Cisco | 16 Asa 5512-x, Asa 5515-x, Asa 5525-x and 13 more | 2026-08-11 | 8.6 High |
| A vulnerability in the software-based SSL/TLS message handler of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of SSL/TLS messages when the device performs software-based SSL decryption. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message through an affected device. SSL/TLS messages sent to an affected device do not trigger this vulnerability. A successful exploit could allow the attacker to cause a process to crash. This crash would then trigger a reload of the device. No manual intervention is needed to recover the device after the reload. | ||||
| CVE-2021-34783 | 1 Cisco | 18 Adaptive Security Appliance Software, Asa 5505, Asa 5505 Firmware and 15 more | 2026-08-11 | 8.6 High |
| A vulnerability in the software-based SSL/TLS message handler of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient validation of SSL/TLS messages when the device performs software-based SSL/TLS decryption. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: Datagram TLS (DTLS) messages cannot be used to exploit this vulnerability. | ||||
| CVE-2021-44228 | 13 Apache, Apple, Bentley and 10 more | 177 Log4j, Xcode, Synchro and 174 more | 2026-08-11 | 10 Critical |
| Apache Log4j2 2.0-beta9 through 2.15.0 (excluding security releases 2.12.2, 2.12.3, and 2.3.1) JNDI features used in configuration, log messages, and parameters do not protect against attacker controlled LDAP and other JNDI related endpoints. An attacker who can control log messages or log message parameters can execute arbitrary code loaded from LDAP servers when message lookup substitution is enabled. From log4j 2.15.0, this behavior has been disabled by default. From version 2.16.0 (along with 2.12.2, 2.12.3, and 2.3.1), this functionality has been completely removed. Note that this vulnerability is specific to log4j-core and does not affect log4net, log4cxx, or other Apache Logging Services projects. | ||||
| CVE-2023-20063 | 1 Cisco | 2 Secure Firewall Management Center, Secure Firewall Threat Defense | 2026-08-11 | 8.2 High |
| A vulnerability in the inter-device communication mechanisms between devices that are running Cisco Firepower Threat Defense (FTD) Software and devices that are running Cisco Firepower Management (FMC) Software could allow an authenticated, local attacker to execute arbitrary commands with root permissions on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by accessing the expert mode of an affected device and submitting specific commands to a connected system. A successful exploit could allow the attacker to execute arbitrary code in the context of an FMC device if the attacker has administrative privileges on an associated FTD device. Alternatively, a successful exploit could allow the attacker to execute arbitrary code in the context of an FTD device if the attacker has administrative privileges on an associated FMC device. | ||||
| CVE-2026-71217 | 2 Iperf3 Project, Redhat | 2 Iperf3, Enterprise Linux | 2026-08-11 | 7.5 High |
| A flaw was found in iperf3. A remote attacker can exploit this vulnerability by sending crafted control-channel JSON with oversized numeric parameters, such as `parallel` and `len`, which are not properly validated by the server. This improper input validation can lead to excessive stream and thread creation, as well as large buffer allocations, causing resource exhaustion. Consequently, this can result in a Denial of Service (DoS) on the affected iperf3 server. | ||||
| CVE-2026-21083 | 1 Samsung | 1 Smart Switch | 2026-08-11 | N/A |
| Improper input validation in Smart Switch prior to version 3.7.72.6 allows adjacent attackers to access sensitive data. | ||||
| CVE-2026-0282 | 2 Palo Alto Networks, Paloaltonetworks | 4 Cloud Ngfw, Pan-os, Prisma Access and 1 more | 2026-08-11 | 6.5 Medium |
| A file deletion vulnerability in Palo Alto Networks PAN-OS® software enables an unauthenticated attacker with network access to the management web interface to delete files from a temporary directory. The security risk posed by this issue is minimized by restricting access to the management web interface to only trusted internal IP addresses according to our recommended best practice deployment guidelines https://live.paloaltonetworks.com/t5/community-blogs/tips-amp-tricks-how-to-secure-the-management-access-of-your-palo/ba-p/464431 . This issue is applicable to PAN-OS software on PA-Series and VM-Series firewalls and on Panorama (virtual and M-Series). Cloud NGFW and Prisma® Access are not impacted by this vulnerability. | ||||
| CVE-2020-27339 | 2 Insyde, Siemens | 33 Insydeh2o, Ruggedcom Apr1808, Ruggedcom Apr1808 Firmware and 30 more | 2026-08-11 | 6.7 Medium |
| In the kernel in Insyde InsydeH2O 5.x, certain SMM drivers did not correctly validate the CommBuffer and CommBufferSize parameters, allowing callers to corrupt either the firmware or the OS memory. The fixed versions for this issue in the AhciBusDxe, IdeBusDxe, NvmExpressDxe, SdHostDriverDxe, and SdMmcDeviceDxe drivers are 05.16.25, 05.26.25, 05.35.25, 05.43.25, and 05.51.25 (for Kernel 5.1 through 5.5). | ||||
| CVE-2026-73158 | 1 Misp | 1 Cti-transmute | 2026-08-11 | N/A |
| Affected versions of cti-transmute insufficiently validate saved graph configuration data. Graph configurations can contain style properties that are later consumed by Pivotick, and Pivotick interprets svgIcon as HTML. Because saved configurations may be created by one user and later displayed to other users—including administrators—a malicious user could store a crafted svgIcon value that executes script in another viewer’s browser. The fix introduces a strict configuration schema on both the server and client. Only known properties are accepted, style entries are limited to shape, color, and size, and dangerous properties such as svgIcon and iconClass are explicitly rejected. Existing stored configurations are also sanitized when listed and again before being applied in the browser. | ||||
| CVE-2026-72728 | 1 Discourse | 1 Discourse | 2026-08-11 | 6.3 Medium |
| Discourse is an open-source discussion platform. Prior to 2026.1.7, an authenticated user could submit specially formed URLs that bypassed the Onebox allowlist and embedded malicious content in a site. This issue is fixed in versions 2026.1.7, 2026.6.2, 2026.7.1, and 2026.8.0-latest.1. | ||||
| CVE-2026-68171 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 8.2 High |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-72867 | 1 Dokploy | 1 Dokploy | 2026-08-11 | 9.9 Critical |
| Dokploy is a free, self-hostable Platform as a Service (PaaS). From 0.29.3 until 0.29.13, the incomplete fix for CVE-2026-45628 leaves packages/server/src/db/schema/compose.ts branch fields without server-side validation, allowing a direct compose.update request to store a malicious customGitBranch, branch, gitlabBranch, bitbucketBranch, or giteaBranch. A low-privileged authenticated user can trigger compose.deploy, which passes the stored branch to shell-based Git clone commands in packages/server/src/utils/providers/git.ts, github.ts, gitlab.ts, bitbucket.ts, and gitea.ts, resulting in arbitrary host command execution. This issue is fixed in version 0.29.13. | ||||
| CVE-2026-68339 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: validate Realtek vendor event length btusb_recv_event_realtek() reads the event code at data[0] and the Realtek subevent code at data[2] before deciding whether to consume a vendor event as a coredump. For example, the two-byte event ff 00 contains a complete vendor-event header declaring zero parameters. The old classifier still reads a nonexistent third byte and can misclassify the event as a coredump if the adjacent byte is 0x34. Require the HCI event header and first parameter to be present before inspecting the Realtek subevent code. Short events continue through the normal HCI receive path, which owns their protocol validation. | ||||
| CVE-2026-14225 | 2 Easy-appointments, Wordpress | 2 Easy Appointments, Wordpress | 2026-08-10 | 2.7 Low |
| The Easy Appointments WordPress plugin before 3.12.28 does not correctly validate shortcode input in one of its block-rendering actions, checking only the first tag of the supplied string against an allowlist while rendering the entire string, allowing users with contributor-level access to execute arbitrary registered shortcodes. | ||||
| CVE-2026-68247 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/bios: range check LFP Data Block panel_type2 While the panel_type from LFP Data Block is range checked, panel_type2 is not. Add a few helpers for range checking, and use them to not only check panel_type2, but also improve clarity and correctness in the panel type selection. Discovered using AI-assisted static analysis confirmed by Intel Product Security. v2: - Fix commit message typo (Michał) - Add is_panel_type_pnp() (Ville) (cherry picked from commit c9ebe5d2f25729d6cfbbb1235d640bf67f9275df) | ||||
| CVE-2026-9031 | 1 Tp-link | 1 Archer A6 V4 | 2026-08-10 | N/A |
| An input validation vulnerability exists in the HTTP-WRITEOEM handler due to insufficient validation of user-supplied data before it is processed by internal flash-write handling logic. Successful exploitation may cause httpd process or device to crash, resulting in loss of access to the web interface and a denial-of-service condition. | ||||
| CVE-2026-21058 | 1 Samsung Mobile | 1 Samsung Mobile Devices | 2026-08-10 | N/A |
| Improper input validation in Samsung Contacts prior to SMR Aug-2026 Release 1 allows local attackers to delete file with Samsung Contacts' privilege. | ||||