Filtered by vendor Linux
Subscriptions
Total
16299 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-68307 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: can: gs_usb: gs_usb_xmit_callback(): fix handling of failed transmitted URBs The driver lacks the cleanup of failed transfers of URBs. This reduces the number of available URBs per error by 1. This leads to reduced performance and ultimately to a complete stop of the transmission. If the sending of a bulk URB fails do proper cleanup: - increase netdev stats - mark the echo_sbk as free - free the driver's context and do accounting - wake the send queue | ||||
| CVE-2025-68311 | 1 Linux | 1 Linux Kernel | 2025-12-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: ip22zilog: Use platform device for probing After commit 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM") serial drivers need to provide a device in struct uart_port.dev otherwise an oops happens. To fix this issue for ip22zilog driver switch driver to a platform driver and setup the serial device in sgi-ip22 code. | ||||
| CVE-2025-68318 | 1 Linux | 1 Linux Kernel | 2025-12-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: thead: th1520-ap: set all AXI clocks to CLK_IS_CRITICAL The AXI crossbar of TH1520 has no proper timeout handling, which means gating AXI clocks can easily lead to bus timeout and thus system hang. Set all AXI clock gates to CLK_IS_CRITICAL. All these clock gates are ungated by default on system reset. In addition, convert all current CLK_IGNORE_UNUSED usage to CLK_IS_CRITICAL to prevent unwanted clock gating. | ||||
| CVE-2025-68320 | 1 Linux | 1 Linux Kernel | 2025-12-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: lan966x: Fix sleeping in atomic context The following warning was seen when we try to connect using ssh to the device. BUG: sleeping function called from invalid context at kernel/locking/mutex.c:575 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 104, name: dropbear preempt_count: 1, expected: 0 INFO: lockdep is turned off. CPU: 0 UID: 0 PID: 104 Comm: dropbear Tainted: G W 6.18.0-rc2-00399-g6f1ab1b109b9-dirty #530 NONE Tainted: [W]=WARN Hardware name: Generic DT based system Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x7c/0xac dump_stack_lvl from __might_resched+0x16c/0x2b0 __might_resched from __mutex_lock+0x64/0xd34 __mutex_lock from mutex_lock_nested+0x1c/0x24 mutex_lock_nested from lan966x_stats_get+0x5c/0x558 lan966x_stats_get from dev_get_stats+0x40/0x43c dev_get_stats from dev_seq_printf_stats+0x3c/0x184 dev_seq_printf_stats from dev_seq_show+0x10/0x30 dev_seq_show from seq_read_iter+0x350/0x4ec seq_read_iter from seq_read+0xfc/0x194 seq_read from proc_reg_read+0xac/0x100 proc_reg_read from vfs_read+0xb0/0x2b0 vfs_read from ksys_read+0x6c/0xec ksys_read from ret_fast_syscall+0x0/0x1c Exception stack(0xf0b11fa8 to 0xf0b11ff0) 1fa0: 00000001 00001000 00000008 be9048d8 00001000 00000001 1fc0: 00000001 00001000 00000008 00000003 be905920 0000001e 00000000 00000001 1fe0: 0005404c be9048c0 00018684 b6ec2cd8 It seems that we are using a mutex in a atomic context which is wrong. Change the mutex with a spinlock. | ||||
| CVE-2025-68322 | 1 Linux | 1 Linux Kernel | 2025-12-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: parisc: Avoid crash due to unaligned access in unwinder Guenter Roeck reported this kernel crash on his emulated B160L machine: Starting network: udhcpc: started, v1.36.1 Backtrace: [<104320d4>] unwind_once+0x1c/0x5c [<10434a00>] walk_stackframe.isra.0+0x74/0xb8 [<10434a6c>] arch_stack_walk+0x28/0x38 [<104e5efc>] stack_trace_save+0x48/0x5c [<105d1bdc>] set_track_prepare+0x44/0x6c [<105d9c80>] ___slab_alloc+0xfc4/0x1024 [<105d9d38>] __slab_alloc.isra.0+0x58/0x90 [<105dc80c>] kmem_cache_alloc_noprof+0x2ac/0x4a0 [<105b8e54>] __anon_vma_prepare+0x60/0x280 [<105a823c>] __vmf_anon_prepare+0x68/0x94 [<105a8b34>] do_wp_page+0x8cc/0xf10 [<105aad88>] handle_mm_fault+0x6c0/0xf08 [<10425568>] do_page_fault+0x110/0x440 [<10427938>] handle_interruption+0x184/0x748 [<11178398>] schedule+0x4c/0x190 BUG: spinlock recursion on CPU#0, ifconfig/2420 lock: terminate_lock.2+0x0/0x1c, .magic: dead4ead, .owner: ifconfig/2420, .owner_cpu: 0 While creating the stack trace, the unwinder uses the stack pointer to guess the previous frame to read the previous stack pointer from memory. The crash happens, because the unwinder tries to read from unaligned memory and as such triggers the unalignment trap handler which then leads to the spinlock recursion and finally to a deadlock. Fix it by checking the alignment before accessing the memory. | ||||
| CVE-2025-68217 | 1 Linux | 1 Linux Kernel | 2025-12-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Input: pegasus-notetaker - fix potential out-of-bounds access In the pegasus_notetaker driver, the pegasus_probe() function allocates the URB transfer buffer using the wMaxPacketSize value from the endpoint descriptor. An attacker can use a malicious USB descriptor to force the allocation of a very small buffer. Subsequently, if the device sends an interrupt packet with a specific pattern (e.g., where the first byte is 0x80 or 0x42), the pegasus_parse_packet() function parses the packet without checking the allocated buffer size. This leads to an out-of-bounds memory access. | ||||
| CVE-2025-68218 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvme-multipath: fix lockdep WARN due to partition scan work Blktests test cases nvme/014, 057 and 058 fail occasionally due to a lockdep WARN. As reported in the Closes tag URL, the WARN indicates that a deadlock can happen due to the dependency among disk->open_mutex, kblockd workqueue completion and partition_scan_work completion. To avoid the lockdep WARN and the potential deadlock, cut the dependency by running the partition_scan_work not by kblockd workqueue but by nvme_wq. | ||||
| CVE-2025-68219 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: fix memory leak in smb3_fs_context_parse_param error path Add proper cleanup of ctx->source and fc->source to the cifs_parse_mount_err error handler. This ensures that memory allocated for the source strings is correctly freed on all error paths, matching the cleanup already performed in the success path by smb3_cleanup_fs_context_contents(). Pointers are also set to NULL after freeing to prevent potential double-free issues. This change fixes a memory leak originally detected by syzbot. The leak occurred when processing Opt_source mount options if an error happened after ctx->source and fc->source were successfully allocated but before the function completed. The specific leak sequence was: 1. ctx->source = smb3_fs_context_fullpath(ctx, '/') allocates memory 2. fc->source = kstrdup(ctx->source, GFP_KERNEL) allocates more memory 3. A subsequent error jumps to cifs_parse_mount_err 4. The old error handler freed passwords but not the source strings, causing the memory to leak. This issue was not addressed by commit e8c73eb7db0a ("cifs: client: fix memory leak in smb3_fs_context_parse_param"), which only fixed leaks from repeated fsconfig() calls but not this error path. Patch updated with minor change suggested by kernel test robot | ||||
| CVE-2025-68224 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fix a regression triggered by scsi_host_busy() Commit 995412e23bb2 ("blk-mq: Replace tags->lock with SRCU for tag iterators") introduced the following regression: Call trace: __srcu_read_lock+0x30/0x80 (P) blk_mq_tagset_busy_iter+0x44/0x300 scsi_host_busy+0x38/0x70 ufshcd_print_host_state+0x34/0x1bc ufshcd_link_startup.constprop.0+0xe4/0x2e0 ufshcd_init+0x944/0xf80 ufshcd_pltfrm_init+0x504/0x820 ufs_rockchip_probe+0x2c/0x88 platform_probe+0x5c/0xa4 really_probe+0xc0/0x38c __driver_probe_device+0x7c/0x150 driver_probe_device+0x40/0x120 __driver_attach+0xc8/0x1e0 bus_for_each_dev+0x7c/0xdc driver_attach+0x24/0x30 bus_add_driver+0x110/0x230 driver_register+0x68/0x130 __platform_driver_register+0x20/0x2c ufs_rockchip_pltform_init+0x1c/0x28 do_one_initcall+0x60/0x1e0 kernel_init_freeable+0x248/0x2c4 kernel_init+0x20/0x140 ret_from_fork+0x10/0x20 Fix this regression by making scsi_host_busy() check whether the SCSI host tag set has already been initialized. tag_set->ops is set by scsi_mq_setup_tags() just before blk_mq_alloc_tag_set() is called. This fix is based on the assumption that scsi_host_busy() and scsi_mq_setup_tags() calls are serialized. This is the case in the UFS driver. | ||||
| CVE-2025-68234 | 1 Linux | 1 Linux Kernel | 2025-12-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/cmd_net: fix wrong argument types for skb_queue_splice() If timestamp retriving needs to be retried and the local list of SKB's already has entries, then it's spliced back into the socket queue. However, the arguments for the splice helper are transposed, causing exactly the wrong direction of splicing into the on-stack list. Fix that up. | ||||
| CVE-2025-68235 | 1 Linux | 1 Linux Kernel | 2025-12-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nouveau/firmware: Add missing kfree() of nvkm_falcon_fw::boot nvkm_falcon_fw::boot is allocated, but no one frees it. This causes a kmemleak warning. Make sure this data is deallocated. | ||||
| CVE-2025-68237 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mtdchar: fix integer overflow in read/write ioctls The "req.start" and "req.len" variables are u64 values that come from the user at the start of the function. We mask away the high 32 bits of "req.len" so that's capped at U32_MAX but the "req.start" variable can go up to U64_MAX which means that the addition can still integer overflow. Use check_add_overflow() to fix this bug. | ||||
| CVE-2025-68238 | 1 Linux | 1 Linux Kernel | 2025-12-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: cadence: fix DMA device NULL pointer dereference The DMA device pointer `dma_dev` was being dereferenced before ensuring that `cdns_ctrl->dmac` is properly initialized. Move the assignment of `dma_dev` after successfully acquiring the DMA channel to ensure the pointer is valid before use. | ||||
| CVE-2025-68243 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: NFS: Check the TLS certificate fields in nfs_match_client() If the TLS security policy is of type RPC_XPRTSEC_TLS_X509, then the cert_serial and privkey_serial fields need to match as well since they define the client's identity, as presented to the server. | ||||
| CVE-2025-68287 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: Fix race condition between concurrent dwc3_remove_requests() call paths This patch addresses a race condition caused by unsynchronized execution of multiple call paths invoking `dwc3_remove_requests()`, leading to premature freeing of USB requests and subsequent crashes. Three distinct execution paths interact with `dwc3_remove_requests()`: Path 1: Triggered via `dwc3_gadget_reset_interrupt()` during USB reset handling. The call stack includes: - `dwc3_ep0_reset_state()` - `dwc3_ep0_stall_and_restart()` - `dwc3_ep0_out_start()` - `dwc3_remove_requests()` - `dwc3_gadget_del_and_unmap_request()` Path 2: Also initiated from `dwc3_gadget_reset_interrupt()`, but through `dwc3_stop_active_transfers()`. The call stack includes: - `dwc3_stop_active_transfers()` - `dwc3_remove_requests()` - `dwc3_gadget_del_and_unmap_request()` Path 3: Occurs independently during `adb root` execution, which triggers USB function unbind and bind operations. The sequence includes: - `gserial_disconnect()` - `usb_ep_disable()` - `dwc3_gadget_ep_disable()` - `dwc3_remove_requests()` with `-ESHUTDOWN` status Path 3 operates asynchronously and lacks synchronization with Paths 1 and 2. When Path 3 completes, it disables endpoints and frees 'out' requests. If Paths 1 or 2 are still processing these requests, accessing freed memory leads to a crash due to use-after-free conditions. To fix this added check for request completion and skip processing if already completed and added the request status for ep0 while queue. | ||||
| CVE-2025-68231 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/mempool: fix poisoning order>0 pages with HIGHMEM The kernel test has reported: BUG: unable to handle page fault for address: fffba000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 03171067 *pte = 00000000 Oops: Oops: 0002 [#1] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Tainted: G T 6.18.0-rc2-00031-gec7f31b2a2d3 #1 NONE a1d066dfe789f54bc7645c7989957d2bdee593ca Tainted: [T]=RANDSTRUCT Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 EIP: memset (arch/x86/include/asm/string_32.h:168 arch/x86/lib/memcpy_32.c:17) Code: a5 8b 4d f4 83 e1 03 74 02 f3 a4 83 c4 04 5e 5f 5d 2e e9 73 41 01 00 90 90 90 3e 8d 74 26 00 55 89 e5 57 56 89 c6 89 d0 89 f7 <f3> aa 89 f0 5e 5f 5d 2e e9 53 41 01 00 cc cc cc 55 89 e5 53 57 56 EAX: 0000006b EBX: 00000015 ECX: 001fefff EDX: 0000006b ESI: fffb9000 EDI: fffba000 EBP: c611fbf0 ESP: c611fbe8 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 EFLAGS: 00010287 CR0: 80050033 CR2: fffba000 CR3: 0316e000 CR4: 00040690 Call Trace: poison_element (mm/mempool.c:83 mm/mempool.c:102) mempool_init_node (mm/mempool.c:142 mm/mempool.c:226) mempool_init_noprof (mm/mempool.c:250 (discriminator 1)) ? mempool_alloc_pages (mm/mempool.c:640) bio_integrity_initfn (block/bio-integrity.c:483 (discriminator 8)) ? mempool_alloc_pages (mm/mempool.c:640) do_one_initcall (init/main.c:1283) Christoph found out this is due to the poisoning code not dealing properly with CONFIG_HIGHMEM because only the first page is mapped but then the whole potentially high-order page is accessed. We could give up on HIGHMEM here, but it's straightforward to fix this with a loop that's mapping, poisoning or checking and unmapping individual pages. | ||||
| CVE-2025-68221 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix address removal logic in mptcp_pm_nl_rm_addr Fix inverted WARN_ON_ONCE condition that prevented normal address removal counter updates. The current code only executes decrement logic when the counter is already 0 (abnormal state), while normal removals (counter > 0) are ignored. | ||||
| CVE-2025-40075 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp_metrics: use dst_dev_net_rcu() Replace three dst_dev() with a lockdep enabled helper. | ||||
| CVE-2025-39872 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hsr: hold rcu and dev lock for hsr_get_port_ndev hsr_get_port_ndev calls hsr_for_each_port, which need to hold rcu lock. On the other hand, before return the port device, we need to hold the device reference to avoid UaF in the caller function. | ||||
| CVE-2021-47642 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: video: fbdev: nvidiafb: Use strscpy() to prevent buffer overflow Coverity complains of a possible buffer overflow. However, given the 'static' scope of nvidia_setup_i2c_bus() it looks like that can't happen after examiniing the call sites. CID 19036 (#1 of 1): Copy into fixed size buffer (STRING_OVERFLOW) 1. fixed_size_dest: You might overrun the 48-character fixed-size string chan->adapter.name by copying name without checking the length. 2. parameter_as_source: Note: This defect has an elevated risk because the source argument is a parameter of the current function. 89 strcpy(chan->adapter.name, name); Fix this warning by using strscpy() which will silence the warning and prevent any future buffer overflows should the names used to identify the channel become much longer. | ||||