Total
4745 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64490 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: virtio: Validate control metadata from the device virtio-snd control handling trusts the device-provided control type and value count returned by the device. That metadata is then used directly to index g_v2a_type_map[] in virtsnd_kctl_info(), and to size loops and memcpy() operations in virtsnd_kctl_get() and virtsnd_kctl_put() against fixed-size virtio_snd_ctl_value and snd_ctl_elem_value arrays. A buggy or malicious device can therefore trigger out-of-bounds access by advertising an invalid control type or an oversized value count. Validate control type and count once in virtsnd_kctl_parse_cfg(), before querying enumerated items or exposing the control to ALSA. | ||||
| CVE-2026-64367 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: hid-goodix-spi: validate report size to prevent stack buffer overflow goodix_hid_set_raw_report() builds a protocol frame in a 128-byte stack buffer (tmp_buf), writing an 11-12 byte header followed by the caller-supplied report data. The HID core caps report size at HID_MAX_BUFFER_SIZE (16384) by default, while the driver does not set hid_ll_driver.max_buffer_size and performs no bounds checking before copying the payload: memcpy(tmp_buf + tx_len, buf, len); A hidraw SET_REPORT ioctl with a report larger than ~116 bytes overflows the stack buffer. Add a size check after constructing the header, rejecting reports that would exceed the buffer capacity. Discovered by Atuin - Automated Vulnerability Discovery Engine. | ||||
| CVE-2026-64219 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Validate payload length and link_index in dc_process_dmub_aux_transfer_async [Why&How] dc_process_dmub_aux_transfer_async() copies payload->length bytes into a 16-byte stack buffer (dpaux.data[16]) guarded only by an ASSERT(), which is a no-op in release builds. If a caller ever passes length > 16 this results in a stack buffer overflow via memcpy. Additionally, link_index is used to dereference dc->links[] without bounds checking against dc->link_count, risking an out-of-bounds access. Replace the ASSERT with a hard runtime check that returns false when payload->length exceeds the destination buffer size, and add a bounds check for link_index before it is used. (cherry picked from commit ba4caa9fecdf7a38f98c878ad05a8a64148b6881) | ||||
| CVE-2026-63932 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: chemical: mhz19b: reject oversized serial replies mhz19b_receive_buf() appends each serdev chunk into the fixed MHZ19B_CMD_SIZE receive buffer and advances buf_idx by len without checking that the chunk fits in the remaining space. A large callback can therefore overflow st->buf before the command path validates the reply. Reset the reply state before each command and reject oversized serial replies before copying them into the fixed buffer. When an oversized reply is detected, wake the waiter and report -EMSGSIZE instead of overwriting st->buf. | ||||
| CVE-2026-63887 | 1 Linux | 1 Linux Kernel | 2026-07-25 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Bound iscsi_encode_text_output() appends to rsp_buf iscsi_encode_text_output() concatenates "key=value\0" records into login->rsp_buf, an 8192-byte kzalloc(MAX_KEY_VALUE_PAIRS) buffer allocated in iscsit_alloc_login_setup_buffer(). The three sprintf() call sites in this function (lines 1398, 1411, 1424 in v7.1-rc2) never check the remaining buffer capacity: *length += sprintf(output_buf, "%s=%s", er->key, er->value); *length += 1; output_buf = textbuf + *length; The 8192-byte ceiling at iscsi_target_check_login_request() bounds the *input* Login PDU payload, but a single PDU can carry up to 2048 minimal four-byte "a=b\0" pairs, each unknown key expanding to a 16-byte "a=NotUnderstood\0" output record via iscsi_add_notunderstood_response(). 2048 * 16 = 32 KiB of output into an 8 KiB buffer, producing a ~24 KiB heap overrun in the kmalloc-8k slab. The fix introduces a static iscsi_encode_text_record() helper that uses snprintf() with a per-call bounds check against the remaining buffer, and threads a u32 textbuf_size parameter through iscsi_encode_text_output(). Both call sites in iscsi_target_handle_csg_zero() (PHASE_SECURITY) and iscsi_target_handle_csg_one() (PHASE_OPERATIONAL) pass MAX_KEY_VALUE_PAIRS. On overflow the encoder logs the condition, calls iscsi_release_extra_responses() to drop queued records, and returns -1; both caller sites now emit ISCSI_STATUS_CLS_INITIATOR_ERR / ISCSI_LOGIN_STATUS_INIT_ERR via iscsit_tx_login_rsp() before returning, so the initiator sees an explicit failed-login response rather than a silent connection drop. (Prior to this patch only the PHASE_OPERATIONAL caller did that; the PHASE_SECURITY caller is converted to the same shape.) | ||||
| CVE-2026-45811 | 1 Apache | 1 Nimble | 2026-07-24 | 7.5 High |
| Buffer Copy without Checking Size of Input ('Classic Buffer Overflow') vulnerability in Apache NimBLE. The HCI socket transport did not check whether a received HCI event would fit the configured event pool before copying it, allowing a buffer overflow. Severity is low: exploitation requires either a misconfigured pool size or a malicious/compromised controller on the other end of the HCI socket link, not over-the-air Bluetooth access. This issue affects Apache NimBLE: through 1.9.0. Users are recommended to upgrade to version 1.10.0, which fixes the issue. | ||||
| CVE-2026-29009 | 2 Denx, U-boot | 2 U-boot, U-boot | 2026-07-24 | 8.2 High |
| U-Boot before 2026.07-rc2 contains a buffer overflow vulnerability in nfs_readlink_reply() (net/nfs-common.c) when CONFIG_CMD_NFS is enabled, allowing a malicious or compromised NFS server to overflow the 2048-byte nfs_path_buff buffer by returning multiple relative symlink targets that are appended without cumulative length validation. Attackers can send two or more READLINK responses containing relative symlink targets of approximately 1100 bytes each to corrupt adjacent BSS variables including nfs_server_ip, nfs_server_mount_port, nfs_server_port, nfs_our_port, nfs_state, and rpc_id, potentially achieving memory corruption and control over the NFS client state machine. | ||||
| CVE-2026-49759 | 1 Erlang | 4 Erlang/otp, Erlang\/otp, Erts and 1 more | 2026-07-24 | 8.2 High |
| Stack-based Buffer Overflow vulnerability in Erlang OTP erts (inet_drv) allows an unauthenticated remote attacker to crash the BEAM VM by sending a crafted SCTP ERROR chunk. The sctp_parse_error_chunk function in erts/emulator/drivers/common/inet_drv.c parses SCTP ERROR chunks and writes cause codes into a fixed-size stack-allocated ErlDrvTermData spec[] array without checking bounds. A remote attacker who has established an SCTP association to a listening port can send a single crafted SCTP ERROR chunk containing enough cause codes to overflow the stack buffer, crashing the VM. The attacker can only write 16-bit values interleaved with a fixed tag, so the overflow does not provide a controlled return address, limiting exploitation to Denial of Service. A crafted SCTP ERROR chunk may also leak bits and pieces of Erlang VM memory into the received error packet observed by the Erlang process. Such data is already readable by the user running the Erlang VM, so the disclosure scope is limited. This issue affects OTP from OTP 17.0 before OTP 29.0.2, OTP 28.5.0.2 and OTP 27.3.4.13, corresponding to erts from 6.0 before 17.0.2, 16.4.0.2 and 15.2.7.9. | ||||
| CVE-2026-44880 | 1 Hpe | 1 Aos-cx | 2026-07-23 | 8.8 High |
| A buffer overflow vulnerability was found in the command line interface of AOS-CX. Successful exploitation of these vulnerabilities could allow an remote low-privileged user to execute arbitrary code as a privileged user on the underlying operating system. | ||||
| CVE-2026-63453 | 1 Hpe | 1 Aos-cx | 2026-07-23 | 7.2 High |
| Buffer overflow vulnerabilities exist in the command line interface of AOS-CX. Successful exploitation of these vulnerabilities could allow a remote high-privileged user to execute arbitrary code as a privileged user on the underlying operating system. | ||||
| CVE-2026-16360 | 1 Mozilla | 1 Firefox | 2026-07-23 | 9.8 Critical |
| Memory safety bugs present in Firefox ESR 115.37, Firefox ESR 140.12 and Firefox 152. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13. | ||||
| CVE-2026-16359 | 1 Mozilla | 1 Firefox | 2026-07-22 | 9.1 Critical |
| Incorrect boundary conditions in the Audio/Video: GMP component. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13. | ||||
| CVE-2026-63899 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: mxuport: fix memory corruption with small endpoint Make sure that the bulk-out endpoint max packet size is at least eight bytes to avoid user-controlled slab corruption should a malicious device report a smaller size. | ||||
| CVE-2026-64620 | 1 Freerdp | 1 Freerdp | 2026-07-21 | 9.8 Critical |
| FreeRDP before 3.28.0 (affected <=3.27.1) contains a heap-based buffer overflow in crypto_rsa_common() (libfreerdp/crypto/crypto.c). The function writes the modular-exponentiation result into the caller's output buffer via BN_bn2bin() and only afterward checks output_length > out_length, so out-of-bounds bytes are written before the bounds check. On the server side, when a client selects RDP Standard Security, the encrypted client random is decrypted into a fixed 32-byte buffer. Because the server publishes its RSA public key, an unauthenticated attacker can forge a ciphertext whose decrypted value is up to the full modulus length (e.g. 256 bytes for RSA-2048), overflowing the 32-byte heap buffer by up to ~224 attacker-controlled bytes pre-authentication, resulting in denial of service. | ||||
| CVE-2026-52584 | 1 Libjxl | 1 Libjxl | 2026-07-20 | 7.1 High |
| Buffer Overflow vulnerability in libjxl v.0.11.2 and before allows a local attacker to obtain sensitive information via the DecodeImageAPNG function | ||||
| CVE-2026-38755 | 1 Busybox | 1 Busybox | 2026-07-20 | 2.9 Low |
| A heap overflow in the evalcommand() function (shell/ash.c) of Busybox v1.38.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted input. | ||||
| CVE-2026-64041 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: fs210x: fix possible buffer overflow In fs210x_effect_scene_info(), a string was copied like this: strscpy(DST, SRC, strlen(SRC) + 1); A buffer overflow would happen if strlen(SRC) >= sizeof(DST). Actually, strscpy() must be used this way: strscpy(DST, SRC, sizeof(DST)); strscpy(DST, SRC); // defaults to sizeof(DST) | ||||
| CVE-2026-64135 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/adm1266) widen blackbox-info buffer to I2C_SMBUS_BLOCK_MAX adm1266_nvmem_read_blackbox() declares a 5-byte stack buffer and passes it to i2c_smbus_read_block_data() to retrieve the 4-byte BLACKBOX_INFO response. i2c_smbus_read_block_data() does not honour caller buffer sizes -- it memcpy()s data.block[0] bytes from the SMBus transaction (where data.block[0] is the length byte returned by the slave device, up to I2C_SMBUS_BLOCK_MAX = 32): memcpy(values, &data.block[1], data.block[0]); If the device returns any block length above 5, the call overflows the caller's 5-byte stack buffer before the post-call if (ret != 4) return -EIO; check has a chance to reject the response. Widen the local buffer to I2C_SMBUS_BLOCK_MAX so the helper has room for any well-formed SMBus block response, matching the convention used by the other i2c_smbus_read_block_data() callers in this driver. | ||||
| CVE-2026-64085 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/adm1266) bounce blackbox records through a protocol-sized buffer adm1266_pmbus_block_xfer() copies the device-supplied block payload into the caller-provided buffer using the device-supplied length: memcpy(data_r, &msgs[1].buf[1], msgs[1].buf[0]); The helper does not know how large data_r is and trusts the device to return at most one record's worth of bytes. adm1266_nvmem_read_blackbox() violates that contract: it advances read_buff inside data->dev_mem in ADM1266_BLACKBOX_SIZE (64-byte) strides while the helper is willing to write up to ADM1266_PMBUS_BLOCK_MAX (255) bytes. A device that returns more than 64 bytes on the trailing record (read_buff offset 1984 in the 2048-byte dev_mem allocation) overflows dev_mem by up to 191 bytes before the post-call if (ret != ADM1266_BLACKBOX_SIZE) return -EIO; can reject the response. Contain the fix in the caller without changing the helper signature: read each record into a 255-byte local bounce buffer that matches the helper's maximum output, validate the returned length, and only then copy exactly ADM1266_BLACKBOX_SIZE bytes into the dev_mem slot. | ||||
| CVE-2026-50527 | 2 Microsoft, Redhat | 4 .net, Visual Studio 2022, Visual Studio 2026 and 1 more | 2026-07-17 | 7.5 High |
| Stack-based buffer overflow in .NET Framework allows an unauthorized attacker to deny service over a network. | ||||