Total
3472 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-20344 | 1 Cisco | 4 Imm Management Package, Ucs 64108, Ucs 6454 and 1 more | 2025-08-13 | 5.3 Medium |
| A vulnerability in system resource management in Cisco UCS 6400 and 6500 Series Fabric Interconnects that are in Intersight Managed Mode (IMM) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the Device Console UI of an affected device. This vulnerability is due to insufficient rate-limiting of TCP connections to an affected device. An attacker could exploit this vulnerability by sending a high number of TCP packets to the Device Console UI. A successful exploit could allow an attacker to cause the Device Console UI process to crash, resulting in a DoS condition. A manual reload of the fabric interconnect is needed to restore complete functionality. | ||||
| CVE-2023-27334 | 1 Softing | 4 Edgeaggregator, Edgeconnector, Opc Ua C\+\+ Software Development Kit and 1 more | 2025-08-13 | N/A |
| Softing edgeConnector Siemens ConditionRefresh Resource Exhaustion Denial-of-Service Vulnerability. This vulnerability allows remote attackers to create a denial-of-service condition on affected installations of Softing edgeConnector Siemens. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of OPC UA ConditionRefresh requests. By sending a large number of requests, an attacker can consume all available resources on the server. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-20498. | ||||
| CVE-2022-39158 | 1 Siemens | 21 Ruggedcom Rmc8388, Ruggedcom Ros, Ruggedcom Rs416pv2 and 18 more | 2025-08-12 | 5.3 Medium |
| A vulnerability has been identified in RUGGEDCOM i800, RUGGEDCOM i800NC, RUGGEDCOM i801, RUGGEDCOM i801NC, RUGGEDCOM i802, RUGGEDCOM i802NC, RUGGEDCOM i803, RUGGEDCOM i803NC, RUGGEDCOM M2100, RUGGEDCOM M2100F, RUGGEDCOM M2100NC, RUGGEDCOM M2200, RUGGEDCOM M2200F, RUGGEDCOM M2200NC, RUGGEDCOM M969, RUGGEDCOM M969F, RUGGEDCOM M969NC, RUGGEDCOM RMC30, RUGGEDCOM RMC30NC, RUGGEDCOM RMC8388 V4.X, RUGGEDCOM RMC8388 V5.X, RUGGEDCOM RMC8388NC V4.X, RUGGEDCOM RMC8388NC V5.X, RUGGEDCOM RP110, RUGGEDCOM RP110NC, RUGGEDCOM RS1600, RUGGEDCOM RS1600F, RUGGEDCOM RS1600FNC, RUGGEDCOM RS1600NC, RUGGEDCOM RS1600T, RUGGEDCOM RS1600TNC, RUGGEDCOM RS400, RUGGEDCOM RS400F, RUGGEDCOM RS400NC, RUGGEDCOM RS401, RUGGEDCOM RS401NC, RUGGEDCOM RS416, RUGGEDCOM RS416F, RUGGEDCOM RS416NC, RUGGEDCOM RS416NCv2 V4.X, RUGGEDCOM RS416NCv2 V5.X, RUGGEDCOM RS416P, RUGGEDCOM RS416PF, RUGGEDCOM RS416PNC, RUGGEDCOM RS416PNCv2 V4.X, RUGGEDCOM RS416PNCv2 V5.X, RUGGEDCOM RS416Pv2 V4.X, RUGGEDCOM RS416Pv2 V5.X, RUGGEDCOM RS416v2 V4.X, RUGGEDCOM RS416v2 V5.X, RUGGEDCOM RS8000, RUGGEDCOM RS8000A, RUGGEDCOM RS8000ANC, RUGGEDCOM RS8000H, RUGGEDCOM RS8000HNC, RUGGEDCOM RS8000NC, RUGGEDCOM RS8000T, RUGGEDCOM RS8000TNC, RUGGEDCOM RS900, RUGGEDCOM RS900 (32M) V4.X, RUGGEDCOM RS900 (32M) V5.X, RUGGEDCOM RS900F, RUGGEDCOM RS900G, RUGGEDCOM RS900G (32M) V4.X, RUGGEDCOM RS900G (32M) V5.X, RUGGEDCOM RS900GF, RUGGEDCOM RS900GNC, RUGGEDCOM RS900GNC(32M) V4.X, RUGGEDCOM RS900GNC(32M) V5.X, RUGGEDCOM RS900GP, RUGGEDCOM RS900GPF, RUGGEDCOM RS900GPNC, RUGGEDCOM RS900L, RUGGEDCOM RS900LNC, RUGGEDCOM RS900M-GETS-C01, RUGGEDCOM RS900M-GETS-XX, RUGGEDCOM RS900M-STND-C01, RUGGEDCOM RS900M-STND-XX, RUGGEDCOM RS900MNC-GETS-C01, RUGGEDCOM RS900MNC-GETS-XX, RUGGEDCOM RS900MNC-STND-XX, RUGGEDCOM RS900MNC-STND-XX-C01, RUGGEDCOM RS900NC, RUGGEDCOM RS900NC(32M) V4.X, RUGGEDCOM RS900NC(32M) V5.X, RUGGEDCOM RS900W, RUGGEDCOM RS910, RUGGEDCOM RS910L, RUGGEDCOM RS910LNC, RUGGEDCOM RS910NC, RUGGEDCOM RS910W, RUGGEDCOM RS920L, RUGGEDCOM RS920LNC, RUGGEDCOM RS920W, RUGGEDCOM RS930L, RUGGEDCOM RS930LNC, RUGGEDCOM RS930W, RUGGEDCOM RS940G, RUGGEDCOM RS940GF, RUGGEDCOM RS940GNC, RUGGEDCOM RS969, RUGGEDCOM RS969NC, RUGGEDCOM RSG2100, RUGGEDCOM RSG2100 (32M) V4.X, RUGGEDCOM RSG2100 (32M) V5.X, RUGGEDCOM RSG2100F, RUGGEDCOM RSG2100NC, RUGGEDCOM RSG2100NC(32M) V4.X, RUGGEDCOM RSG2100NC(32M) V5.X, RUGGEDCOM RSG2100P, RUGGEDCOM RSG2100P (32M) V4.X, RUGGEDCOM RSG2100P (32M) V5.X, RUGGEDCOM RSG2100PF, RUGGEDCOM RSG2100PNC, RUGGEDCOM RSG2100PNC (32M) V4.X, RUGGEDCOM RSG2100PNC (32M) V5.X, RUGGEDCOM RSG2200, RUGGEDCOM RSG2200F, RUGGEDCOM RSG2200NC, RUGGEDCOM RSG2288 V4.X, RUGGEDCOM RSG2288 V5.X, RUGGEDCOM RSG2288NC V4.X, RUGGEDCOM RSG2288NC V5.X, RUGGEDCOM RSG2300 V4.X, RUGGEDCOM RSG2300 V5.X, RUGGEDCOM RSG2300F, RUGGEDCOM RSG2300NC V4.X, RUGGEDCOM RSG2300NC V5.X, RUGGEDCOM RSG2300P V4.X, RUGGEDCOM RSG2300P V5.X, RUGGEDCOM RSG2300PF, RUGGEDCOM RSG2300PNC V4.X, RUGGEDCOM RSG2300PNC V5.X, RUGGEDCOM RSG2488 V4.X, RUGGEDCOM RSG2488 V5.X, RUGGEDCOM RSG2488F, RUGGEDCOM RSG2488NC V4.X, RUGGEDCOM RSG2488NC V5.X, RUGGEDCOM RSG907R, RUGGEDCOM RSG908C, RUGGEDCOM RSG909R, RUGGEDCOM RSG910C, RUGGEDCOM RSG920P V4.X, RUGGEDCOM RSG920P V5.X, RUGGEDCOM RSG920PNC V4.X, RUGGEDCOM RSG920PNC V5.X, RUGGEDCOM RSL910, RUGGEDCOM RSL910NC, RUGGEDCOM RST2228, RUGGEDCOM RST2228P, RUGGEDCOM RST916C, RUGGEDCOM RST916P. Affected devices improperly handle partial HTTP requests which makes them vulnerable to slowloris attacks. This could allow a remote attacker to create a denial of service condition that persists until the attack ends. | ||||
| CVE-2025-55152 | 1 Oakserver | 1 Oak | 2025-08-12 | 5.3 Medium |
| oak is a middleware framework for Deno's native HTTP server, Deno Deploy, Node.js 16.5 and later, Cloudflare Workers and Bun. In versions 17.1.5 and below, it's possible to significantly slow down an oak server with specially crafted values of the x-forwarded-proto or x-forwarded-for headers. | ||||
| CVE-2023-44321 | 1 Siemens | 142 6ag1206-2bb00-7ac2, 6ag1206-2bb00-7ac2 Firmware, 6ag1206-2bs00-7ac2 and 139 more | 2025-08-12 | 2.7 Low |
| Affected devices do not properly validate the length of inputs when performing certain configuration changes in the web interface allowing an authenticated attacker to cause a denial of service condition. The device needs to be restarted for the web interface to become available again. | ||||
| CVE-2025-5024 | 1 Redhat | 6 Enterprise Linux, Rhel Aus, Rhel E4s and 3 more | 2025-08-12 | 7.4 High |
| A flaw was found in gnome-remote-desktop. Once gnome-remote-desktop listens for RDP connections, an unauthenticated attacker can exhaust system resources and repeatedly crash the process. There may be a resource leak after many attacks, which will also result in gnome-remote-desktop no longer being able to open files even after it is restarted via systemd. | ||||
| CVE-2023-33026 | 1 Qualcomm | 401 Ar8035, Ar8035 Firmware, Ar9380 and 398 more | 2025-08-11 | 7.5 High |
| Transient DOS in WLAN Firmware while parsing a NAN management frame. | ||||
| CVE-2024-20351 | 1 Cisco | 1 Firepower Threat Defense Software | 2025-08-11 | 8.6 High |
| A vulnerability in the TCP/IP traffic handling function of the Snort Detection Engine of Cisco Firepower Threat Defense (FTD) Software and Cisco FirePOWER Services could allow an unauthenticated, remote attacker to cause legitimate network traffic to be dropped, resulting in a denial of service (DoS) condition. This vulnerability is due to the improper handling of TCP/IP network traffic. An attacker could exploit this vulnerability by sending a large amount of TCP/IP network traffic through the affected device. A successful exploit could allow the attacker to cause the Cisco FTD device to drop network traffic, resulting in a DoS condition. The affected device must be rebooted to resolve the DoS condition. | ||||
| CVE-2025-2586 | 1 Redhat | 1 Openshift Lightspeed | 2025-08-08 | 7.5 High |
| A flaw was found in the OpenShift Lightspeed Service, which is vulnerable to unauthenticated API request flooding. Repeated queries to non-existent endpoints inflate metrics storage and processing, consuming excessive resources. This issue can lead to monitoring system degradation, increased disk usage, and potential service unavailability. Since the issue does not require authentication, an external attacker can exhaust CPU, RAM, and disk space, impacting both application and cluster stability. | ||||
| CVE-2025-44650 | 1 Netgear | 4 Eax80, Eax80 Firmware, R7000 and 1 more | 2025-08-07 | 7.5 High |
| In Netgear R7000 V1.3.1.64_10.1.36 and EAX80 V1.0.1.70_1.0.2, the USERLIMIT_GLOBAL option is set to 0 in the bftpd.conf configuration file. This can cause DoS attacks when unlimited users are connected. | ||||
| CVE-2025-44651 | 1 Trendnet | 2 Tpl-430ap, Tpl-430ap Firmware | 2025-08-07 | 7.5 High |
| In TRENDnet TPL-430AP FW1.0, the USERLIMIT_GLOBAL option is set to 0 in the bftpd-related configuration file. This can cause DoS attacks when unlimited users are connected. | ||||
| CVE-2024-1930 | 2 Fedora, Rpm-software-management | 2 Dnf5daemon-server, Dnf5 | 2025-08-07 | 6.5 Medium |
| No Limit on Number of Open Sessions / Bad Session Close Behaviour in dnf5daemon-server before 5.1.17 allows a malicious user to impact Availability via No Limit on Number of Open Sessions. There is no limit on how many sessions D-Bus clients may create using the `open_session()` D-Bus method. For each session a thread is created in dnf5daemon-server. This spends a couple of hundred megabytes of memory in the process. Further connections will become impossible, likely because no more threads can be spawned by the D-Bus service. | ||||
| CVE-2025-44653 | 1 H3c | 2 Gr2200, Gr2200 Firmware | 2025-08-07 | 7.5 High |
| In H3C GR2200 MiniGR1A0V100R016, the USERLIMIT_GLOBAL option is set to 0 in the /etc/bftpd.conf. This can cause DoS attacks when unlimited users are connected. | ||||
| CVE-2025-54884 | 1 Vision Ui Project | 1 Vision Ui | 2025-08-06 | N/A |
| Vision UI is a collection of enterprise-grade, dependency-free modules for modern web projects. In versions 1.4.0 and below, the generateSecureId and getSecureRandomInt functions in security-kit versions prior to 3.5.0 (packaged in Vision UI 1.4.0 and below) are vulnerable to Denial of Service (DoS) attacks. The generateSecureId(length) function directly used the length parameter to size a Uint8Array buffer, allowing attackers to exhaust server memory through repeated requests for large IDs since the previous 1024 limit was insufficient. The getSecureRandomInt(min, max) function calculated buffer size based on the range between min and max, where large ranges caused excessive memory allocation and CPU-intensive rejection-sampling loops that could hang the thread. This issue is fixed in version 1.5.0. | ||||
| CVE-2025-52887 | 1 Yhirose | 1 Cpp-httplib | 2025-08-06 | 7.5 High |
| cpp-httplib is a C++11 single-file header-only cross platform HTTP/HTTPS library. In version 0.21.0, when many http headers fields are passed in, the library does not limit the number of headers, and the memory associated with the headers will not be released when the connection is disconnected. This leads to potential exhaustion of system memory and results in a server crash or unresponsiveness. Version 0.22.0 contains a patch for the issue. | ||||
| CVE-2024-42651 | 1 Emqx | 1 Nanomq | 2025-08-06 | 7.5 High |
| NanoMQ v0.17.9 was discovered to contain a heap use-after-free vulnerability via the component sub_Ctx_handle. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted SUBSCRIBE message. | ||||
| CVE-2024-1765 | 1 Cloudflare | 1 Quiche | 2025-08-06 | 5.9 Medium |
| Cloudflare Quiche (through version 0.19.1/0.20.0) was affected by an unlimited resource allocation vulnerability causing rapid increase of memory usage of the system running quiche server or client. A remote attacker could take advantage of this vulnerability by repeatedly sending an unlimited number of 1-RTT CRYPTO frames after previously completing the QUIC handshake. Exploitation was possible for the duration of the connection which could be extended by the attacker. quiche 0.19.2 and 0.20.1 are the earliest versions containing the fix for this issue. | ||||
| CVE-2024-1410 | 1 Cloudflare | 1 Quiche | 2025-08-06 | 3.7 Low |
| Cloudflare quiche was discovered to be vulnerable to unbounded storage of information related to connection ID retirement, which could lead to excessive resource consumption. Each QUIC connection possesses a set of connection Identifiers (IDs); see RFC 9000 Section 5.1 https://datatracker.ietf.org/doc/html/rfc9000#section-5.1 . Endpoints declare the number of active connection IDs they are willing to support using the active_connection_id_limit transport parameter. The peer can create new IDs using a NEW_CONNECTION_ID frame but must stay within the active ID limit. This is done by retirement of old IDs, the endpoint sends NEW_CONNECTION_ID includes a value in the retire_prior_to field, which elicits a RETIRE_CONNECTION_ID frame as confirmation. An unauthenticated remote attacker can exploit the vulnerability by sending NEW_CONNECTION_ID frames and manipulating the connection (e.g. by restricting the peer's congestion window size) so that RETIRE_CONNECTION_ID frames can only be sent at a slower rate than they are received, leading to storage of information related to connection IDs in an unbounded queue. Quiche versions 0.19.2 and 0.20.1 are the earliest to address this problem. There is no workaround for affected versions. | ||||
| CVE-2023-39180 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-08-06 | 4 Medium |
| A flaw was found within the handling of SMB2_READ commands in the kernel ksmbd module. The issue results from not releasing memory after its effective lifetime. An attacker can leverage this to create a denial-of-service condition on affected installations of Linux. Authentication is not required to exploit this vulnerability, but only systems with ksmbd enabled are vulnerable. | ||||
| CVE-2025-53893 | 1 Filebrowser | 1 Filebrowser | 2025-08-05 | 6.5 Medium |
| File Browser provides a file managing interface within a specified directory and it can be used to upload, delete, preview, rename, and edit files. In version 2.38.0, a Denial of Service (DoS) vulnerability exists in the file processing logic when reading a file on endpoint `Filebrowser-Server-IP:PORT/files/{file-name}` . While the server correctly handles and stores uploaded files, it attempts to load the entire content into memory during read operations without size checks or resource limits. This allows an authenticated user to upload a large file and trigger uncontrolled memory consumption on read, potentially crashing the server and making it unresponsive. As of time of publication, no known patches are available. | ||||