{"dataType": "CVE_RECORD", "dataVersion": "5.2", "cveMetadata": {"cveId": "CVE-2026-19676", "assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad", "state": "PUBLISHED", "assignerShortName": "zephyr", "dateReserved": "2026-08-12T22:25:11.381Z", "datePublished": "2026-10-21T18:19:27.767Z", "dateUpdated": "2026-10-23T21:57:28.879Z"}, "containers": {"cna": {"providerMetadata": {"orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad", "shortName": "zephyr", "dateUpdated": "2026-10-21T18:19:27.767Z"}, "title": "PECI transfer syscall verifier does not validate embedded user buffer pointers, allowing arbitrary kernel memory read/write from user mode", "descriptions": [{"lang": "en", "value": "The user-mode verifier for the peci_transfer() system call, z_vrfy_peci_transfer() in drivers/peci/peci_handlers.c, checked only the device object permission and copied the caller-supplied struct peci_msg with k_usermode_from_copy(). That copy validates the outer structure only; the buf pointers and len values inside the embedded struct peci_buf members tx_buffer and rx_buffer remained fully caller-controlled and were passed unchecked to the driver.\n\nEvery in-tree PECI driver dereferences those pointers in supervisor mode: peci_npcx_transfer() in drivers/peci/peci_npcx.c and peci_it8xxx2_transfer() in drivers/peci/peci_ite_it8xxx2.c copy hardware bytes into rx_buffer.buf[i] and read command bytes out of tx_buffer.buf[i], and peci_xec_read()/peci_xec_write() in drivers/peci/peci_mchp_xec.c do the same with no bound on rx_buffer.len at all. A user-mode thread that has been granted the PECI device object \u2014 the normal way an application exposes a device under CONFIG_USERSPACE \u2014 could therefore point rx_buffer.buf at kernel data structures and have the driver write hardware-supplied bytes there, or point tx_buffer.buf at kernel memory and have its contents pushed onto the PECI/eSPI out-of-band bus.\n\nThe impact is a full user-mode-to-kernel escape: an arbitrary kernel write primitive (integrity and, through it, code execution at supervisor privilege), an arbitrary kernel read disclosed to a PECI bus observer, and a trivially reachable supervisor-mode fault if an unmapped address is supplied. Exploitation requires CONFIG_USERSPACE=y, one of the PECI drivers enabled (CONFIG_PECI_NPCX, CONFIG_PECI_XEC or CONFIG_PECI_ITE_IT8XXX2), and local code execution in a user-mode thread holding the PECI device.\n\nThe fix adds K_SYSCALL_MEMORY_READ() and K_SYSCALL_MEMORY_WRITE() checks over the two embedded buffers, with a size_add_overflow() guard on the frame-check-sequence byte accounted for in the RX length."}], "affected": [{"vendor": "zephyrproject", "product": "zephyr", "collectionURL": "https://github.com/zephyrproject-rtos/zephyr", "packageName": "zephyr", "defaultStatus": "unaffected", "programFiles": ["drivers/peci/peci_handlers.c"], "programRoutines": [{"name": "z_vrfy_peci_transfer"}], "versions": [{"version": "2.3.0", "status": "affected", "versionType": "semver", "lessThanOrEqual": "4.4.2"}]}], "references": [{"url": "https://github.com/zephyrproject-rtos/zephyr/commit/d7faf323d52b7e8845a63b1f854a82bdda44c261", "name": "Fix commit", "tags": ["patch"]}, {"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-g66q-frxm-3hfg", "name": "GHSA-g66q-frxm-3hfg"}], "metrics": [{"format": "CVSS", "cvssV3_1": {"version": "3.1", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H", "baseScore": 7.8, "baseSeverity": "HIGH"}}], "problemTypes": [{"descriptions": [{"lang": "en", "description": "memory-safety", "cweId": "CWE-822", "type": "CWE"}]}], "x_generator": {"engine": "cvelib 1.8.0"}}, "adp": [{"metrics": [{"other": {"type": "ssvc", "content": {"timestamp": "2026-10-23T20:45:36.561871Z", "id": "CVE-2026-19676", "options": [{"Exploitation": "none"}, {"Automatable": "no"}, {"Technical Impact": "total"}], "role": "CISA Coordinator", "version": "2.0.3"}}}], "title": "CISA ADP Vulnrichment", "providerMetadata": {"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "shortName": "CISA-ADP", "dateUpdated": "2026-10-23T21:57:28.879Z"}}]}}

{"dataType": "CVE_RECORD", "containers": {"adp": [{"title": "CISA ADP Vulnrichment", "metrics": [{"other": {"type": "ssvc", "content": {"id": "CVE-2026-19676", "role": "CISA Coordinator", "options": [{"Exploitation": "none"}, {"Automatable": "no"}, {"Technical Impact": "total"}], "version": "2.0.3", "timestamp": "2026-10-23T20:45:36.561871Z"}}}], "providerMetadata": {"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "shortName": "CISA-ADP", "dateUpdated": "2026-10-23T20:45:37.533Z"}}], "cna": {"title": "PECI transfer syscall verifier does not validate embedded user buffer pointers, allowing arbitrary kernel memory read/write from user mode", "metrics": [{"format": "CVSS", "cvssV3_1": {"version": "3.1", "baseScore": 7.8, "baseSeverity": "HIGH", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"}}], "affected": [{"vendor": "zephyrproject", "product": "zephyr", "versions": [{"status": "affected", "version": "2.3.0", "versionType": "semver", "lessThanOrEqual": "4.4.2"}], "packageName": "zephyr", "programFiles": ["drivers/peci/peci_handlers.c"], "collectionURL": "https://github.com/zephyrproject-rtos/zephyr", "defaultStatus": "unaffected", "programRoutines": [{"name": "z_vrfy_peci_transfer"}]}], "references": [{"url": "https://github.com/zephyrproject-rtos/zephyr/commit/d7faf323d52b7e8845a63b1f854a82bdda44c261", "name": "Fix commit", "tags": ["patch"]}, {"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-g66q-frxm-3hfg", "name": "GHSA-g66q-frxm-3hfg"}], "x_generator": {"engine": "cvelib 1.8.0"}, "descriptions": [{"lang": "en", "value": "The user-mode verifier for the peci_transfer() system call, z_vrfy_peci_transfer() in drivers/peci/peci_handlers.c, checked only the device object permission and copied the caller-supplied struct peci_msg with k_usermode_from_copy(). That copy validates the outer structure only; the buf pointers and len values inside the embedded struct peci_buf members tx_buffer and rx_buffer remained fully caller-controlled and were passed unchecked to the driver.\n\nEvery in-tree PECI driver dereferences those pointers in supervisor mode: peci_npcx_transfer() in drivers/peci/peci_npcx.c and peci_it8xxx2_transfer() in drivers/peci/peci_ite_it8xxx2.c copy hardware bytes into rx_buffer.buf[i] and read command bytes out of tx_buffer.buf[i], and peci_xec_read()/peci_xec_write() in drivers/peci/peci_mchp_xec.c do the same with no bound on rx_buffer.len at all. A user-mode thread that has been granted the PECI device object \u2014 the normal way an application exposes a device under CONFIG_USERSPACE \u2014 could therefore point rx_buffer.buf at kernel data structures and have the driver write hardware-supplied bytes there, or point tx_buffer.buf at kernel memory and have its contents pushed onto the PECI/eSPI out-of-band bus.\n\nThe impact is a full user-mode-to-kernel escape: an arbitrary kernel write primitive (integrity and, through it, code execution at supervisor privilege), an arbitrary kernel read disclosed to a PECI bus observer, and a trivially reachable supervisor-mode fault if an unmapped address is supplied. Exploitation requires CONFIG_USERSPACE=y, one of the PECI drivers enabled (CONFIG_PECI_NPCX, CONFIG_PECI_XEC or CONFIG_PECI_ITE_IT8XXX2), and local code execution in a user-mode thread holding the PECI device.\n\nThe fix adds K_SYSCALL_MEMORY_READ() and K_SYSCALL_MEMORY_WRITE() checks over the two embedded buffers, with a size_add_overflow() guard on the frame-check-sequence byte accounted for in the RX length."}], "problemTypes": [{"descriptions": [{"lang": "en", "type": "CWE", "cweId": "CWE-822", "description": "memory-safety"}]}], "providerMetadata": {"orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad", "shortName": "zephyr", "dateUpdated": "2026-10-21T18:19:27.767Z"}}}, "cveMetadata": {"cveId": "CVE-2026-19676", "state": "PUBLISHED", "dateUpdated": "2026-10-23T21:57:28.879Z", "dateReserved": "2026-08-12T22:25:11.381Z", "assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad", "datePublished": "2026-10-21T18:19:27.767Z", "assignerShortName": "zephyr"}, "dataVersion": "5.2"}

{"affected": [{"affectedData": [{"collectionURL": "https://github.com/zephyrproject-rtos/zephyr", "defaultStatus": "unaffected", "packageName": "zephyr", "product": "zephyr", "programFiles": ["drivers/peci/peci_handlers.c"], "programRoutines": [{"name": "z_vrfy_peci_transfer"}], "vendor": "zephyrproject", "versions": [{"lessThanOrEqual": "4.4.2", "status": "affected", "version": "2.3.0", "versionType": "semver"}]}], "source": "vulnerabilities@zephyrproject.org"}], "cveTags": [], "descriptions": [{"lang": "en", "value": "The user-mode verifier for the peci_transfer() system call, z_vrfy_peci_transfer() in drivers/peci/peci_handlers.c, checked only the device object permission and copied the caller-supplied struct peci_msg with k_usermode_from_copy(). That copy validates the outer structure only; the buf pointers and len values inside the embedded struct peci_buf members tx_buffer and rx_buffer remained fully caller-controlled and were passed unchecked to the driver.\n\nEvery in-tree PECI driver dereferences those pointers in supervisor mode: peci_npcx_transfer() in drivers/peci/peci_npcx.c and peci_it8xxx2_transfer() in drivers/peci/peci_ite_it8xxx2.c copy hardware bytes into rx_buffer.buf[i] and read command bytes out of tx_buffer.buf[i], and peci_xec_read()/peci_xec_write() in drivers/peci/peci_mchp_xec.c do the same with no bound on rx_buffer.len at all. A user-mode thread that has been granted the PECI device object \u2014 the normal way an application exposes a device under CONFIG_USERSPACE \u2014 could therefore point rx_buffer.buf at kernel data structures and have the driver write hardware-supplied bytes there, or point tx_buffer.buf at kernel memory and have its contents pushed onto the PECI/eSPI out-of-band bus.\n\nThe impact is a full user-mode-to-kernel escape: an arbitrary kernel write primitive (integrity and, through it, code execution at supervisor privilege), an arbitrary kernel read disclosed to a PECI bus observer, and a trivially reachable supervisor-mode fault if an unmapped address is supplied. Exploitation requires CONFIG_USERSPACE=y, one of the PECI drivers enabled (CONFIG_PECI_NPCX, CONFIG_PECI_XEC or CONFIG_PECI_ITE_IT8XXX2), and local code execution in a user-mode thread holding the PECI device.\n\nThe fix adds K_SYSCALL_MEMORY_READ() and K_SYSCALL_MEMORY_WRITE() checks over the two embedded buffers, with a size_add_overflow() guard on the frame-check-sequence byte accounted for in the RX length."}], "id": "CVE-2026-19676", "lastModified": "2026-10-23T22:16:59.867", "metrics": {"cvssMetricV31": [{"cvssData": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 7.8, "baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H", "version": "3.1"}, "exploitabilityScore": 1.8, "impactScore": 5.9, "source": "vulnerabilities@zephyrproject.org", "type": "Secondary"}], "ssvcV203": [{"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "ssvcData": {"id": "CVE-2026-19676", "options": [{"exploitation": "none"}, {"automatable": "no"}, {"technicalImpact": "total"}], "role": "CISA Coordinator", "timestamp": "2026-10-23T20:45:36.561871Z", "version": "2.0.3"}}]}, "published": "2026-10-21T19:17:02.650", "references": [{"source": "vulnerabilities@zephyrproject.org", "url": "https://github.com/zephyrproject-rtos/zephyr/commit/d7faf323d52b7e8845a63b1f854a82bdda44c261"}, {"source": "vulnerabilities@zephyrproject.org", "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-g66q-frxm-3hfg"}], "sourceIdentifier": "vulnerabilities@zephyrproject.org", "vulnStatus": "Awaiting Analysis", "weaknesses": [{"description": [{"lang": "en", "value": "CWE-822"}], "source": "vulnerabilities@zephyrproject.org", "type": "Secondary"}]}

{}