Total
328 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-39989 | 2025-05-04 | 5.5 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: x86/mce: use is_copy_from_user() to determine copy-from-user context Patch series "mm/hwpoison: Fix regressions in memory failure handling", v4. ## 1. What am I trying to do: This patchset resolves two critical regressions related to memory failure handling that have appeared in the upstream kernel since version 5.17, as compared to 5.10 LTS. - copyin case: poison found in user page while kernel copying from user space - instr case: poison found while instruction fetching in user space ## 2. What is the expected outcome and why - For copyin case: Kernel can recover from poison found where kernel is doing get_user() or copy_from_user() if those places get an error return and the kernel return -EFAULT to the process instead of crashing. More specifily, MCE handler checks the fixup handler type to decide whether an in kernel #MC can be recovered. When EX_TYPE_UACCESS is found, the PC jumps to recovery code specified in _ASM_EXTABLE_FAULT() and return a -EFAULT to user space. - For instr case: If a poison found while instruction fetching in user space, full recovery is possible. User process takes #PF, Linux allocates a new page and fills by reading from storage. ## 3. What actually happens and why - For copyin case: kernel panic since v5.17 Commit 4c132d1d844a ("x86/futex: Remove .fixup usage") introduced a new extable fixup type, EX_TYPE_EFAULT_REG, and later patches updated the extable fixup type for copy-from-user operations, changing it from EX_TYPE_UACCESS to EX_TYPE_EFAULT_REG. It breaks previous EX_TYPE_UACCESS handling when posion found in get_user() or copy_from_user(). - For instr case: user process is killed by a SIGBUS signal due to #CMCI and #MCE race When an uncorrected memory error is consumed there is a race between the CMCI from the memory controller reporting an uncorrected error with a UCNA signature, and the core reporting and SRAR signature machine check when the data is about to be consumed. ### Background: why *UN*corrected errors tied to *C*MCI in Intel platform [1] Prior to Icelake memory controllers reported patrol scrub events that detected a previously unseen uncorrected error in memory by signaling a broadcast machine check with an SRAO (Software Recoverable Action Optional) signature in the machine check bank. This was overkill because it's not an urgent problem that no core is on the verge of consuming that bad data. It's also found that multi SRAO UCE may cause nested MCE interrupts and finally become an IERR. Hence, Intel downgrades the machine check bank signature of patrol scrub from SRAO to UCNA (Uncorrected, No Action required), and signal changed to #CMCI. Just to add to the confusion, Linux does take an action (in uc_decode_notifier()) to try to offline the page despite the UC*NA* signature name. ### Background: why #CMCI and #MCE race when poison is consuming in Intel platform [1] Having decided that CMCI/UCNA is the best action for patrol scrub errors, the memory controller uses it for reads too. But the memory controller is executing asynchronously from the core, and can't tell the difference between a "real" read and a speculative read. So it will do CMCI/UCNA if an error is found in any read. Thus: 1) Core is clever and thinks address A is needed soon, issues a speculative read. 2) Core finds it is going to use address A soon after sending the read request 3) The CMCI from the memory controller is in a race with MCE from the core that will soon try to retire the load from address A. Quite often (because speculation has got better) the CMCI from the memory controller is delivered before the core is committed to the instruction reading address A, so the interrupt is taken, and Linux offlines the page (marking it as poison). ## Why user process is killed for instr case Commit 046545a661af ("mm/hwpoison: fix error page recovered but reported "not ---truncated--- | ||||
| CVE-2025-39688 | 2025-05-04 | 5.5 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: nfsd: allow SC_STATUS_FREEABLE when searching via nfs4_lookup_stateid() The pynfs DELEG8 test fails when run against nfsd. It acquires a delegation and then lets the lease time out. It then tries to use the deleg stateid and expects to see NFS4ERR_DELEG_REVOKED, but it gets bad NFS4ERR_BAD_STATEID instead. When a delegation is revoked, it's initially marked with SC_STATUS_REVOKED, or SC_STATUS_ADMIN_REVOKED and later, it's marked with the SC_STATUS_FREEABLE flag, which denotes that it is waiting for s FREE_STATEID call. nfs4_lookup_stateid() accepts a statusmask that includes the status flags that a found stateid is allowed to have. Currently, that mask never includes SC_STATUS_FREEABLE, which means that revoked delegations are (almost) never found. Add SC_STATUS_FREEABLE to the always-allowed status flags, and remove it from nfsd4_delegreturn() since it's now always implied. | ||||
| CVE-2024-57902 | 2025-05-04 | 5.5 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: af_packet: fix vlan_get_tci() vs MSG_PEEK Blamed commit forgot MSG_PEEK case, allowing a crash [1] as found by syzbot. Rework vlan_get_tci() to not touch skb at all, so that it can be used from many cpus on the same skb. Add a const qualifier to skb argument. [1] skbuff: skb_under_panic: text:ffffffff8a8da482 len:32 put:14 head:ffff88807a1d5800 data:ffff88807a1d5810 tail:0x14 end:0x140 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:206 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 UID: 0 PID: 5880 Comm: syz-executor172 Not tainted 6.13.0-rc3-syzkaller-00762-g9268abe611b0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:skb_panic net/core/skbuff.c:206 [inline] RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216 Code: 0b 8d 48 c7 c6 9e 6c 26 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 3a 5a 79 f7 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 RSP: 0018:ffffc90003baf5b8 EFLAGS: 00010286 RAX: 0000000000000087 RBX: dffffc0000000000 RCX: 8565c1eec37aa000 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffff88802616fb50 R08: ffffffff817f0a4c R09: 1ffff92000775e50 R10: dffffc0000000000 R11: fffff52000775e51 R12: 0000000000000140 R13: ffff88807a1d5800 R14: ffff88807a1d5810 R15: 0000000000000014 FS: 00007fa03261f6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd65753000 CR3: 0000000031720000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_push+0xe5/0x100 net/core/skbuff.c:2636 vlan_get_tci+0x272/0x550 net/packet/af_packet.c:565 packet_recvmsg+0x13c9/0x1ef0 net/packet/af_packet.c:3616 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg+0x22f/0x280 net/socket.c:1066 ____sys_recvmsg+0x1c6/0x480 net/socket.c:2814 ___sys_recvmsg net/socket.c:2856 [inline] do_recvmmsg+0x426/0xab0 net/socket.c:2951 __sys_recvmmsg net/socket.c:3025 [inline] __do_sys_recvmmsg net/socket.c:3048 [inline] __se_sys_recvmmsg net/socket.c:3041 [inline] __x64_sys_recvmmsg+0x199/0x250 net/socket.c:3041 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 | ||||
| CVE-2024-57901 | 2025-05-04 | 5.5 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: af_packet: fix vlan_get_protocol_dgram() vs MSG_PEEK Blamed commit forgot MSG_PEEK case, allowing a crash [1] as found by syzbot. Rework vlan_get_protocol_dgram() to not touch skb at all, so that it can be used from many cpus on the same skb. Add a const qualifier to skb argument. [1] skbuff: skb_under_panic: text:ffffffff8a8ccd05 len:29 put:14 head:ffff88807fc8e400 data:ffff88807fc8e3f4 tail:0x11 end:0x140 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:206 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 5892 Comm: syz-executor883 Not tainted 6.13.0-rc4-syzkaller-00054-gd6ef8b40d075 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:skb_panic net/core/skbuff.c:206 [inline] RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216 Code: 0b 8d 48 c7 c6 86 d5 25 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 5a 69 79 f7 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 RSP: 0018:ffffc900038d7638 EFLAGS: 00010282 RAX: 0000000000000087 RBX: dffffc0000000000 RCX: 609ffd18ea660600 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffff88802483c8d0 R08: ffffffff817f0a8c R09: 1ffff9200071ae60 R10: dffffc0000000000 R11: fffff5200071ae61 R12: 0000000000000140 R13: ffff88807fc8e400 R14: ffff88807fc8e3f4 R15: 0000000000000011 FS: 00007fbac5e006c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fbac5e00d58 CR3: 000000001238e000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_push+0xe5/0x100 net/core/skbuff.c:2636 vlan_get_protocol_dgram+0x165/0x290 net/packet/af_packet.c:585 packet_recvmsg+0x948/0x1ef0 net/packet/af_packet.c:3552 sock_recvmsg_nosec net/socket.c:1033 [inline] sock_recvmsg+0x22f/0x280 net/socket.c:1055 ____sys_recvmsg+0x1c6/0x480 net/socket.c:2803 ___sys_recvmsg net/socket.c:2845 [inline] do_recvmmsg+0x426/0xab0 net/socket.c:2940 __sys_recvmmsg net/socket.c:3014 [inline] __do_sys_recvmmsg net/socket.c:3037 [inline] __se_sys_recvmmsg net/socket.c:3030 [inline] __x64_sys_recvmmsg+0x199/0x250 net/socket.c:3030 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2024-56654 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating The usage of rcu_read_(un)lock while inside list_for_each_entry_rcu is not safe since for the most part entries fetched this way shall be treated as rcu_dereference: Note that the value returned by rcu_dereference() is valid only within the enclosing RCU read-side critical section [1]_. For example, the following is **not** legal:: rcu_read_lock(); p = rcu_dereference(head.next); rcu_read_unlock(); x = p->address; /* BUG!!! */ rcu_read_lock(); y = p->data; /* BUG!!! */ rcu_read_unlock(); | ||||
| CVE-2024-53096 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: resolve faulty mmap_region() error path behaviour The mmap_region() function is somewhat terrifying, with spaghetti-like control flow and numerous means by which issues can arise and incomplete state, memory leaks and other unpleasantness can occur. A large amount of the complexity arises from trying to handle errors late in the process of mapping a VMA, which forms the basis of recently observed issues with resource leaks and observable inconsistent state. Taking advantage of previous patches in this series we move a number of checks earlier in the code, simplifying things by moving the core of the logic into a static internal function __mmap_region(). Doing this allows us to perform a number of checks up front before we do any real work, and allows us to unwind the writable unmap check unconditionally as required and to perform a CONFIG_DEBUG_VM_MAPLE_TREE validation unconditionally also. We move a number of things here: 1. We preallocate memory for the iterator before we call the file-backed memory hook, allowing us to exit early and avoid having to perform complicated and error-prone close/free logic. We carefully free iterator state on both success and error paths. 2. The enclosing mmap_region() function handles the mapping_map_writable() logic early. Previously the logic had the mapping_map_writable() at the point of mapping a newly allocated file-backed VMA, and a matching mapping_unmap_writable() on success and error paths. We now do this unconditionally if this is a file-backed, shared writable mapping. If a driver changes the flags to eliminate VM_MAYWRITE, however doing so does not invalidate the seal check we just performed, and we in any case always decrement the counter in the wrapper. We perform a debug assert to ensure a driver does not attempt to do the opposite. 3. We also move arch_validate_flags() up into the mmap_region() function. This is only relevant on arm64 and sparc64, and the check is only meaningful for SPARC with ADI enabled. We explicitly add a warning for this arch if a driver invalidates this check, though the code ought eventually to be fixed to eliminate the need for this. With all of these measures in place, we no longer need to explicitly close the VMA on error paths, as we place all checks which might fail prior to a call to any driver mmap hook. This eliminates an entire class of errors, makes the code easier to reason about and more robust. | ||||
| CVE-2024-50164 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix overloading of MEM_UNINIT's meaning Lonial reported an issue in the BPF verifier where check_mem_size_reg() has the following code: if (!tnum_is_const(reg->var_off)) /* For unprivileged variable accesses, disable raw * mode so that the program is required to * initialize all the memory that the helper could * just partially fill up. */ meta = NULL; This means that writes are not checked when the register containing the size of the passed buffer has not a fixed size. Through this bug, a BPF program can write to a map which is marked as read-only, for example, .rodata global maps. The problem is that MEM_UNINIT's initial meaning that "the passed buffer to the BPF helper does not need to be initialized" which was added back in commit 435faee1aae9 ("bpf, verifier: add ARG_PTR_TO_RAW_STACK type") got overloaded over time with "the passed buffer is being written to". The problem however is that checks such as the above which were added later via 06c1c049721a ("bpf: allow helpers access to variable memory") set meta to NULL in order force the user to always initialize the passed buffer to the helper. Due to the current double meaning of MEM_UNINIT, this bypasses verifier write checks to the memory (not boundary checks though) and only assumes the latter memory is read instead. Fix this by reverting MEM_UNINIT back to its original meaning, and having MEM_WRITE as an annotation to BPF helpers in order to then trigger the BPF verifier checks for writing to memory. Some notes: check_arg_pair_ok() ensures that for ARG_CONST_SIZE{,_OR_ZERO} we can access fn->arg_type[arg - 1] since it must contain a preceding ARG_PTR_TO_MEM. For check_mem_reg() the meta argument can be removed altogether since we do check both BPF_READ and BPF_WRITE. Same for the equivalent check_kfunc_mem_size_reg(). | ||||
| CVE-2024-42240 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/bhi: Avoid warning in #DB handler due to BHI mitigation When BHI mitigation is enabled, if SYSENTER is invoked with the TF flag set then entry_SYSENTER_compat() uses CLEAR_BRANCH_HISTORY and calls the clear_bhb_loop() before the TF flag is cleared. This causes the #DB handler (exc_debug_kernel()) to issue a warning because single-step is used outside the entry_SYSENTER_compat() function. To address this issue, entry_SYSENTER_compat() should use CLEAR_BRANCH_HISTORY after making sure the TF flag is cleared. The problem can be reproduced with the following sequence: $ cat sysenter_step.c int main() { asm("pushf; pop %ax; bts $8,%ax; push %ax; popf; sysenter"); } $ gcc -o sysenter_step sysenter_step.c $ ./sysenter_step Segmentation fault (core dumped) The program is expected to crash, and the #DB handler will issue a warning. Kernel log: WARNING: CPU: 27 PID: 7000 at arch/x86/kernel/traps.c:1009 exc_debug_kernel+0xd2/0x160 ... RIP: 0010:exc_debug_kernel+0xd2/0x160 ... Call Trace: <#DB> ? show_regs+0x68/0x80 ? __warn+0x8c/0x140 ? exc_debug_kernel+0xd2/0x160 ? report_bug+0x175/0x1a0 ? handle_bug+0x44/0x90 ? exc_invalid_op+0x1c/0x70 ? asm_exc_invalid_op+0x1f/0x30 ? exc_debug_kernel+0xd2/0x160 exc_debug+0x43/0x50 asm_exc_debug+0x1e/0x40 RIP: 0010:clear_bhb_loop+0x0/0xb0 ... </#DB> <TASK> ? entry_SYSENTER_compat_after_hwframe+0x6e/0x8d </TASK> [ bp: Massage commit message. ] | ||||
| CVE-2024-42150 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: txgbe: remove separate irq request for MSI and INTx When using MSI or INTx interrupts, request_irq() for pdev->irq will conflict with request_threaded_irq() for txgbe->misc.irq, to cause system crash. So remove txgbe_request_irq() for MSI/INTx case, and rename txgbe_request_msix_irqs() since it only request for queue irqs. Add wx->misc_irq_domain to determine whether the driver creates an IRQ domain and threaded request the IRQs. | ||||
| CVE-2024-41097 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: atm: cxacru: fix endpoint checking in cxacru_bind() Syzbot is still reporting quite an old issue [1] that occurs due to incomplete checking of present usb endpoints. As such, wrong endpoints types may be used at urb sumbitting stage which in turn triggers a warning in usb_submit_urb(). Fix the issue by verifying that required endpoint types are present for both in and out endpoints, taking into account cmd endpoint type. Unfortunately, this patch has not been tested on real hardware. [1] Syzbot report: usb 1-1: BOGUS urb xfer, pipe 1 != type 3 WARNING: CPU: 0 PID: 8667 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 Modules linked in: CPU: 0 PID: 8667 Comm: kworker/0:4 Not tainted 5.14.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 ... Call Trace: cxacru_cm+0x3c0/0x8e0 drivers/usb/atm/cxacru.c:649 cxacru_card_status+0x22/0xd0 drivers/usb/atm/cxacru.c:760 cxacru_bind+0x7ac/0x11a0 drivers/usb/atm/cxacru.c:1209 usbatm_usb_probe+0x321/0x1ae0 drivers/usb/atm/usbatm.c:1055 cxacru_usb_probe+0xdf/0x1e0 drivers/usb/atm/cxacru.c:1363 usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396 call_driver_probe drivers/base/dd.c:517 [inline] really_probe+0x23c/0xcd0 drivers/base/dd.c:595 __driver_probe_device+0x338/0x4d0 drivers/base/dd.c:747 driver_probe_device+0x4c/0x1a0 drivers/base/dd.c:777 __device_attach_driver+0x20b/0x2f0 drivers/base/dd.c:894 bus_for_each_drv+0x15f/0x1e0 drivers/base/bus.c:427 __device_attach+0x228/0x4a0 drivers/base/dd.c:965 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:487 device_add+0xc2f/0x2180 drivers/base/core.c:3354 usb_set_configuration+0x113a/0x1910 drivers/usb/core/message.c:2170 usb_generic_driver_probe+0xba/0x100 drivers/usb/core/generic.c:238 usb_probe_device+0xd9/0x2c0 drivers/usb/core/driver.c:293 | ||||
| CVE-2024-41035 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: core: Fix duplicate endpoint bug by clearing reserved bits in the descriptor Syzbot has identified a bug in usbcore (see the Closes: tag below) caused by our assumption that the reserved bits in an endpoint descriptor's bEndpointAddress field will always be 0. As a result of the bug, the endpoint_is_duplicate() routine in config.c (and possibly other routines as well) may believe that two descriptors are for distinct endpoints, even though they have the same direction and endpoint number. This can lead to confusion, including the bug identified by syzbot (two descriptors with matching endpoint numbers and directions, where one was interrupt and the other was bulk). To fix the bug, we will clear the reserved bits in bEndpointAddress when we parse the descriptor. (Note that both the USB-2.0 and USB-3.1 specs say these bits are "Reserved, reset to zero".) This requires us to make a copy of the descriptor earlier in usb_parse_endpoint() and use the copy instead of the original when checking for duplicates. | ||||
| CVE-2024-40963 | 2025-05-04 | 4.4 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: mips: bmips: BCM6358: make sure CBR is correctly set It was discovered that some device have CBR address set to 0 causing kernel panic when arch_sync_dma_for_cpu_all is called. This was notice in situation where the system is booted from TP1 and BMIPS_GET_CBR() returns 0 instead of a valid address and !!(read_c0_brcm_cmt_local() & (1 << 31)); not failing. The current check whether RAC flush should be disabled or not are not enough hence lets check if CBR is a valid address or not. | ||||
| CVE-2024-40921 | 2025-05-04 | 5.5 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: mst: pass vlan group directly to br_mst_vlan_set_state Pass the already obtained vlan group pointer to br_mst_vlan_set_state() instead of dereferencing it again. Each caller has already correctly dereferenced it for their context. This change is required for the following suspicious RCU dereference fix. No functional changes intended. | ||||
| CVE-2024-38610 | 2025-05-04 | 4.4 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: drivers/virt/acrn: fix PFNMAP PTE checks in acrn_vm_ram_map() Patch series "mm: follow_pte() improvements and acrn follow_pte() fixes". Patch #1 fixes a bunch of issues I spotted in the acrn driver. It compiles, that's all I know. I'll appreciate some review and testing from acrn folks. Patch #2+#3 improve follow_pte(), passing a VMA instead of the MM, adding more sanity checks, and improving the documentation. Gave it a quick test on x86-64 using VM_PAT that ends up using follow_pte(). This patch (of 3): We currently miss handling various cases, resulting in a dangerous follow_pte() (previously follow_pfn()) usage. (1) We're not checking PTE write permissions. Maybe we should simply always require pte_write() like we do for pin_user_pages_fast(FOLL_WRITE)? Hard to tell, so let's check for ACRN_MEM_ACCESS_WRITE for now. (2) We're not rejecting refcounted pages. As we are not using MMU notifiers, messing with refcounted pages is dangerous and can result in use-after-free. Let's make sure to reject them. (3) We are only looking at the first PTE of a bigger range. We only lookup a single PTE, but memmap->len may span a larger area. Let's loop over all involved PTEs and make sure the PFN range is actually contiguous. Reject everything else: it couldn't have worked either way, and rather made use access PFNs we shouldn't be accessing. | ||||
| CVE-2024-38595 | 2025-05-04 | 4.4 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix peer devlink set for SF representor devlink port The cited patch change register devlink flow, and neglect to reflect the changes for peer devlink set logic. Peer devlink set is triggering a call trace if done after devl_register.[1] Hence, align peer devlink set logic with register devlink flow. [1] WARNING: CPU: 4 PID: 3394 at net/devlink/core.c:155 devlink_rel_nested_in_add+0x177/0x180 CPU: 4 PID: 3394 Comm: kworker/u40:1 Not tainted 6.9.0-rc4_for_linust_min_debug_2024_04_16_14_08 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_vhca_event0 mlx5_vhca_state_work_handler [mlx5_core] RIP: 0010:devlink_rel_nested_in_add+0x177/0x180 Call Trace: <TASK> ? __warn+0x78/0x120 ? devlink_rel_nested_in_add+0x177/0x180 ? report_bug+0x16d/0x180 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? devlink_port_init+0x30/0x30 ? devlink_port_type_clear+0x50/0x50 ? devlink_rel_nested_in_add+0x177/0x180 ? devlink_rel_nested_in_add+0xdd/0x180 mlx5_sf_mdev_event+0x74/0xb0 [mlx5_core] notifier_call_chain+0x35/0xb0 blocking_notifier_call_chain+0x3d/0x60 mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core] mlx5_sf_dev_probe+0x185/0x3e0 [mlx5_core] auxiliary_bus_probe+0x38/0x80 ? driver_sysfs_add+0x51/0x80 really_probe+0xc5/0x3a0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 bus_probe_device+0x86/0xa0 device_add+0x64f/0x860 __auxiliary_device_add+0x3b/0xa0 mlx5_sf_dev_add+0x139/0x330 [mlx5_core] mlx5_sf_dev_state_change_handler+0x1e4/0x250 [mlx5_core] notifier_call_chain+0x35/0xb0 blocking_notifier_call_chain+0x3d/0x60 mlx5_vhca_state_work_handler+0x151/0x200 [mlx5_core] process_one_work+0x13f/0x2e0 worker_thread+0x2bd/0x3c0 ? rescuer_thread+0x410/0x410 kthread+0xc4/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x50 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> | ||||
| CVE-2024-38381 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nfc: nci: Fix uninit-value in nci_rx_work syzbot reported the following uninit-value access issue [1] nci_rx_work() parses received packet from ndev->rx_q. It should be validated header size, payload size and total packet size before processing the packet. If an invalid packet is detected, it should be silently discarded. | ||||
| CVE-2024-36963 | 2025-05-04 | 4.4 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: tracefs: Reset permissions on remount if permissions are options There's an inconsistency with the way permissions are handled in tracefs. Because the permissions are generated when accessed, they default to the root inode's permission if they were never set by the user. If the user sets the permissions, then a flag is set and the permissions are saved via the inode (for tracefs files) or an internal attribute field (for eventfs). But if a remount happens that specify the permissions, all the files that were not changed by the user gets updated, but the ones that were are not. If the user were to remount the file system with a given permission, then all files and directories within that file system should be updated. This can cause security issues if a file's permission was updated but the admin forgot about it. They could incorrectly think that remounting with permissions set would update all files, but miss some. For example: # cd /sys/kernel/tracing # chgrp 1002 current_tracer # ls -l [..] -rw-r----- 1 root root 0 May 1 21:25 buffer_size_kb -rw-r----- 1 root root 0 May 1 21:25 buffer_subbuf_size_kb -r--r----- 1 root root 0 May 1 21:25 buffer_total_size_kb -rw-r----- 1 root lkp 0 May 1 21:25 current_tracer -rw-r----- 1 root root 0 May 1 21:25 dynamic_events -r--r----- 1 root root 0 May 1 21:25 dyn_ftrace_total_info -r--r----- 1 root root 0 May 1 21:25 enabled_functions Where current_tracer now has group "lkp". # mount -o remount,gid=1001 . # ls -l -rw-r----- 1 root tracing 0 May 1 21:25 buffer_size_kb -rw-r----- 1 root tracing 0 May 1 21:25 buffer_subbuf_size_kb -r--r----- 1 root tracing 0 May 1 21:25 buffer_total_size_kb -rw-r----- 1 root lkp 0 May 1 21:25 current_tracer -rw-r----- 1 root tracing 0 May 1 21:25 dynamic_events -r--r----- 1 root tracing 0 May 1 21:25 dyn_ftrace_total_info -r--r----- 1 root tracing 0 May 1 21:25 enabled_functions Everything changed but the "current_tracer". Add a new link list that keeps track of all the tracefs_inodes which has the permission flags that tell if the file/dir should use the root inode's permission or not. Then on remount, clear all the flags so that the default behavior of using the root inode's permission is done for all files and directories. | ||||
| CVE-2024-36927 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: Fix uninit-value access in __ip_make_skb() KMSAN reported uninit-value access in __ip_make_skb() [1]. __ip_make_skb() tests HDRINCL to know if the skb has icmphdr. However, HDRINCL can cause a race condition. If calling setsockopt(2) with IP_HDRINCL changes HDRINCL while __ip_make_skb() is running, the function will access icmphdr in the skb even if it is not included. This causes the issue reported by KMSAN. Check FLOWI_FLAG_KNOWN_NH on fl4->flowi4_flags instead of testing HDRINCL on the socket. Also, fl4->fl4_icmp_type and fl4->fl4_icmp_code are not initialized. These are union in struct flowi4 and are implicitly initialized by flowi4_init_output(), but we should not rely on specific union layout. Initialize these explicitly in raw_sendmsg(). [1] BUG: KMSAN: uninit-value in __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481 __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481 ip_finish_skb include/net/ip.h:243 [inline] ip_push_pending_frames+0x4c/0x5c0 net/ipv4/ip_output.c:1508 raw_sendmsg+0x2381/0x2690 net/ipv4/raw.c:654 inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x274/0x3c0 net/socket.c:745 __sys_sendto+0x62c/0x7b0 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x130/0x200 net/socket.c:2199 do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x5f6/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35a/0x7c0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1318 [inline] __ip_append_data+0x49ab/0x68c0 net/ipv4/ip_output.c:1128 ip_append_data+0x1e7/0x260 net/ipv4/ip_output.c:1365 raw_sendmsg+0x22b1/0x2690 net/ipv4/raw.c:648 inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x274/0x3c0 net/socket.c:745 __sys_sendto+0x62c/0x7b0 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x130/0x200 net/socket.c:2199 do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6d/0x75 CPU: 1 PID: 15709 Comm: syz-executor.7 Not tainted 6.8.0-11567-gb3603fcb79b1 #25 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 | ||||
| CVE-2024-36484 | 2025-05-04 | 5.5 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: net: relax socket state check at accept time. Christoph reported the following splat: WARNING: CPU: 1 PID: 772 at net/ipv4/af_inet.c:761 __inet_accept+0x1f4/0x4a0 Modules linked in: CPU: 1 PID: 772 Comm: syz-executor510 Not tainted 6.9.0-rc7-g7da7119fe22b #56 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 RIP: 0010:__inet_accept+0x1f4/0x4a0 net/ipv4/af_inet.c:759 Code: 04 38 84 c0 0f 85 87 00 00 00 41 c7 04 24 03 00 00 00 48 83 c4 10 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 ec b7 da fd <0f> 0b e9 7f fe ff ff e8 e0 b7 da fd 0f 0b e9 fe fe ff ff 89 d9 80 RSP: 0018:ffffc90000c2fc58 EFLAGS: 00010293 RAX: ffffffff836bdd14 RBX: 0000000000000000 RCX: ffff888104668000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: dffffc0000000000 R08: ffffffff836bdb89 R09: fffff52000185f64 R10: dffffc0000000000 R11: fffff52000185f64 R12: dffffc0000000000 R13: 1ffff92000185f98 R14: ffff88810754d880 R15: ffff8881007b7800 FS: 000000001c772880(0000) GS:ffff88811b280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb9fcf2e178 CR3: 00000001045d2002 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> inet_accept+0x138/0x1d0 net/ipv4/af_inet.c:786 do_accept+0x435/0x620 net/socket.c:1929 __sys_accept4_file net/socket.c:1969 [inline] __sys_accept4+0x9b/0x110 net/socket.c:1999 __do_sys_accept net/socket.c:2016 [inline] __se_sys_accept net/socket.c:2013 [inline] __x64_sys_accept+0x7d/0x90 net/socket.c:2013 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x58/0x100 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x4315f9 Code: fd ff 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 ab b4 fd ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffdb26d9c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002b RAX: ffffffffffffffda RBX: 0000000000400300 RCX: 00000000004315f9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000004 RBP: 00000000006e1018 R08: 0000000000400300 R09: 0000000000400300 R10: 0000000000400300 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000040cdf0 R14: 000000000040ce80 R15: 0000000000000055 </TASK> The reproducer invokes shutdown() before entering the listener status. After commit 94062790aedb ("tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets"), the above causes the child to reach the accept syscall in FIN_WAIT1 status. Eric noted we can relax the existing assertion in __inet_accept() | ||||
| CVE-2024-26822 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: set correct id, uid and cruid for multiuser automounts When uid, gid and cruid are not specified, we need to dynamically set them into the filesystem context used for automounting otherwise they'll end up reusing the values from the parent mount. | ||||