Total
63 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-6705 | 2025-07-02 | N/A | ||
| A vulnerability in the Eclipse Open VSX Registry’s automated publishing system could have allowed unauthorized uploads of extensions. Specifically, the system’s build scripts were executed without proper isolation, potentially exposing a privileged token. This token enabled the publishing of new extension versions under any namespace, including those not controlled by an attacker. However, it did not permit deletion of existing extensions, overwriting of published versions, or access to administrative features of the registry. The issue was reported on May 4, 2025, fully resolved by June 24, and followed by a comprehensive audit. No evidence of compromise was found, though 81 extensions were proactively deactivated as a precaution. The standard publishing process remained unaffected. Recommendations have been issued to mitigate similar risks in the future. | ||||
| CVE-2024-7297 | 1 Langflow | 1 Langflow | 2025-06-24 | 8.8 High |
| Langflow versions prior to 1.0.13 suffer from a Privilege Escalation vulnerability, allowing a remote and low privileged attacker to gain super admin privileges by performing a mass assignment request on the '/api/v1/users' endpoint. | ||||
| CVE-2025-6384 | 2025-06-23 | N/A | ||
| Improper Control of Dynamically-Managed Code Resources vulnerability in Crafter Studio of CrafterCMS allows authenticated developers to execute OS commands via Groovy Sandbox Bypass. By inserting malicious Groovy elements, an attacker may bypass Sandbox restrictions and obtain RCE (Remote Code Execution). This issue affects CrafterCMS: from 4.0.0 through 4.2.2. | ||||
| CVE-2025-6107 | 2025-06-23 | 3.1 Low | ||
| A vulnerability was found in comfyanonymous comfyui 0.3.40. It has been classified as problematic. Affected is the function set_attr of the file /comfy/utils.py. The manipulation leads to dynamically-determined object attributes. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2023-31032 | 1 Nvidia | 2 Dgx A100, Dgx A100 Firmware | 2025-06-03 | 7.5 High |
| NVIDIA DGX A100 SBIOS contains a vulnerability where a user may cause a dynamic variable evaluation by local access. A successful exploit of this vulnerability may lead to denial of service. | ||||
| CVE-2023-6184 | 1 Citrix | 1 Virtual Apps And Desktops | 2025-06-02 | 5 Medium |
| Cross SiteScripting vulnerability in Citrix Session Recording allows attacker to perform Cross Site Scripting | ||||
| CVE-2025-46673 | 1 Nasa | 1 Cryptolib | 2025-05-29 | 4.9 Medium |
| NASA CryptoLib before 1.3.2 does not check whether the SA is in an operational state before use, possibly leading to a bypass of the Space Data Link Security protocol (SDLS). | ||||
| CVE-2023-41835 | 1 Apache | 1 Struts | 2025-05-28 | 7.5 High |
| When a Multipart request is performed but some of the fields exceed the maxStringLength limit, the upload files will remain in struts.multipart.saveDir even if the request has been denied. Users are recommended to upgrade to versions Struts 2.5.32 or 6.1.2.2 or Struts 6.3.0.1 or greater, which fixe this issue. | ||||
| CVE-2025-46675 | 1 Nasa | 1 Cryptolib | 2025-05-12 | 3.5 Low |
| In NASA CryptoLib before 1.3.2, the key state is not checked before use, potentially leading to spacecraft hijacking. | ||||
| CVE-2025-31674 | 1 Drupal | 1 Drupal | 2025-05-01 | 7.5 High |
| Improperly Controlled Modification of Dynamically-Determined Object Attributes vulnerability in Drupal Drupal core allows Object Injection.This issue affects Drupal core: from 8.0.0 before 10.3.13, from 10.4.0 before 10.4.3, from 11.0.0 before 11.0.12, from 11.1.0 before 11.1.3. | ||||
| CVE-2022-44000 | 1 Backclick | 1 Backclick | 2025-04-30 | 9.8 Critical |
| An issue was discovered in BACKCLICK Professional 5.9.63. Due to an exposed internal communications interface, it is possible to execute arbitrary system commands on the server. | ||||
| CVE-2023-50386 | 1 Apache | 1 Solr | 2025-04-24 | 8.8 High |
| Improper Control of Dynamically-Managed Code Resources, Unrestricted Upload of File with Dangerous Type, Inclusion of Functionality from Untrusted Control Sphere vulnerability in Apache Solr.This issue affects Apache Solr: from 6.0.0 through 8.11.2, from 9.0.0 before 9.4.1. In the affected versions, Solr ConfigSets accepted Java jar and class files to be uploaded through the ConfigSets API. When backing up Solr Collections, these configSet files would be saved to disk when using the LocalFileSystemRepository (the default for backups). If the backup was saved to a directory that Solr uses in its ClassPath/ClassLoaders, then the jar and class files would be available to use with any ConfigSet, trusted or untrusted. When Solr is run in a secure way (Authorization enabled), as is strongly suggested, this vulnerability is limited to extending the Backup permissions with the ability to add libraries. Users are recommended to upgrade to version 8.11.3 or 9.4.1, which fix the issue. In these versions, the following protections have been added: * Users are no longer able to upload files to a configSet that could be executed via a Java ClassLoader. * The Backup API restricts saving backups to directories that are used in the ClassLoader. | ||||
| CVE-2022-36067 | 2 Redhat, Vm2 Project | 3 Acm, Multicluster Engine, Vm2 | 2025-04-22 | 10 Critical |
| vm2 is a sandbox that can run untrusted code with whitelisted Node's built-in modules. In versions prior to version 3.9.11, a threat actor can bypass the sandbox protections to gain remote code execution rights on the host running the sandbox. This vulnerability was patched in the release of version 3.9.11 of vm2. There are no known workarounds. | ||||
| CVE-2014-9852 | 3 Imagemagick, Opensuse, Suse | 7 Imagemagick, Leap, Opensuse and 4 more | 2025-04-20 | 9.8 Critical |
| distribute-cache.c in ImageMagick re-uses objects after they have been destroyed, which allows remote attackers to have unspecified impact via unspecified vectors. | ||||
| CVE-2012-2055 | 1 Github | 1 Github | 2025-04-11 | 7.5 High |
| GitHub Enterprise before 20120304 does not properly restrict the use of a hash to provide values for a model's attributes, which allows remote attackers to set the public_key[user_id] value via a modified URL for the public-key update form, related to a "mass assignment" vulnerability. | ||||
| CVE-2024-2537 | 1 Logitech | 1 Logi Tune | 2025-04-09 | 4.4 Medium |
| Improper Control of Dynamically-Managed Code Resources vulnerability in Logitech Logi Tune on MacOS allows Local Code Inclusion. | ||||
| CVE-2006-7079 | 1 Exv2 | 1 Content Management System | 2025-04-09 | 9.8 Critical |
| Variable extraction vulnerability in include/common.php in exV2 2.0.4.3 and earlier allows remote attackers to overwrite arbitrary program variables and conduct directory traversal attacks to execute arbitrary code by modifying the $xoopsOption['pagetype'] variable. | ||||
| CVE-2024-8953 | 1 Composio | 1 Composio | 2025-04-01 | 9.8 Critical |
| In composiohq/composio version 0.4.3, the mathematical_calculator endpoint uses the unsafe eval() function to perform mathematical operations. This can lead to arbitrary code execution if untrusted input is passed to the eval() function. | ||||
| CVE-2023-25560 | 1 Datahub Project | 1 Datahub | 2025-03-10 | 8.2 High |
| DataHub is an open-source metadata platform. The AuthServiceClient which is responsible for creation of new accounts, verifying credentials, resetting them or requesting access tokens, crafts multiple JSON strings using format strings with user-controlled data. This means that an attacker may be able to augment these JSON strings to be sent to the backend and that can potentially be abused by including new or colliding values. This issue may lead to an authentication bypass and the creation of system accounts, which effectively can lead to full system compromise. Users are advised to upgrade. There are no known workarounds for this vulnerability. This vulnerability was discovered and reported by the GitHub Security lab and is tracked as GHSL-2022-080. | ||||
| CVE-2024-27135 | 1 Apache | 1 Pulsar | 2025-02-13 | 8.5 High |
| Improper input validation in the Pulsar Function Worker allows a malicious authenticated user to execute arbitrary Java code on the Pulsar Function worker, outside of the sandboxes designated for running user-provided functions. This vulnerability also applies to the Pulsar Broker when it is configured with "functionsWorkerEnabled=true". This issue affects Apache Pulsar versions from 2.4.0 to 2.10.5, from 2.11.0 to 2.11.3, from 3.0.0 to 3.0.2, from 3.1.0 to 3.1.2, and 3.2.0. 2.10 Pulsar Function Worker users should upgrade to at least 2.10.6. 2.11 Pulsar Function Worker users should upgrade to at least 2.11.4. 3.0 Pulsar Function Worker users should upgrade to at least 3.0.3. 3.1 Pulsar Function Worker users should upgrade to at least 3.1.3. 3.2 Pulsar Function Worker users should upgrade to at least 3.2.1. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. | ||||