Total
1285 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-24341 | 2025-04-30 | 6.5 Medium | ||
| A vulnerability in the web application of ctrlX OS allows a remote authenticated (low-privileged) attacker to induce a Denial-of-Service (DoS) condition on the device via multiple crafted HTTP requests. In the worst case, a full power cycle is needed to regain control of the device. | ||||
| CVE-2025-2559 | 1 Redhat | 2 Build Keycloak, Red Hat Single Sign On | 2025-04-30 | 4.9 Medium |
| A flaw was found in Keycloak. When the configuration uses JWT tokens for authentication, the tokens are cached until expiration. If a client uses JWT tokens with an excessively long expiration time, for example, 24 or 48 hours, the cache can grow indefinitely, leading to an OutOfMemoryError. This issue could result in a denial of service condition, preventing legitimate users from accessing the system. | ||||
| CVE-2025-30202 | 2025-04-30 | 7.5 High | ||
| vLLM is a high-throughput and memory-efficient inference and serving engine for LLMs. Versions starting from 0.5.2 and prior to 0.8.5 are vulnerable to denial of service and data exposure via ZeroMQ on multi-node vLLM deployment. In a multi-node vLLM deployment, vLLM uses ZeroMQ for some multi-node communication purposes. The primary vLLM host opens an XPUB ZeroMQ socket and binds it to ALL interfaces. While the socket is always opened for a multi-node deployment, it is only used when doing tensor parallelism across multiple hosts. Any client with network access to this host can connect to this XPUB socket unless its port is blocked by a firewall. Once connected, these arbitrary clients will receive all of the same data broadcasted to all of the secondary vLLM hosts. This data is internal vLLM state information that is not useful to an attacker. By potentially connecting to this socket many times and not reading data published to them, an attacker can also cause a denial of service by slowing down or potentially blocking the publisher. This issue has been patched in version 0.8.5. | ||||
| CVE-2025-26682 | 2025-04-29 | 7.5 High | ||
| Allocation of resources without limits or throttling in ASP.NET Core allows an unauthorized attacker to deny service over a network. | ||||
| CVE-2022-3480 | 1 Phoenixcontact | 62 Fl Mguard Centerport, Fl Mguard Centerport Firmware, Fl Mguard Centerport Vpn-1000 and 59 more | 2025-04-29 | 7.5 High |
| A remote, unauthenticated attacker could cause a denial-of-service of PHOENIX CONTACT FL MGUARD and TC MGUARD devices below version 8.9.0 by sending a larger number of unauthenticated HTTPS connections originating from different source IP’s. Configuring firewall limits for incoming connections cannot prevent the issue. | ||||
| CVE-2025-30409 | 2025-04-29 | N/A | ||
| Denial of service due to allocation of resources without limits. The following products are affected: Acronis Cyber Protect Cloud Agent (Windows) before build 39904. | ||||
| CVE-2025-35965 | 2025-04-29 | 6.5 Medium | ||
| Mattermost versions 10.4.x <= 10.4.2, 10.5.x <= 10.5.0, 9.11.x <= 9.11.10 fail to validate the uniqueness and quantity of task actions within the UpdateRunTaskActions GraphQL operation, which allows an attacker to create task items containing an excessive number of actions triggered by specific posts, overloading the server and leading to a denial-of-service (DoS) condition. | ||||
| CVE-2025-21605 | 2025-04-29 | 7.5 High | ||
| Redis is an open source, in-memory database that persists on disk. In versions starting at 2.6 and prior to 7.4.3, An unauthenticated client can cause unlimited growth of output buffers, until the server runs out of memory or is killed. By default, the Redis configuration does not limit the output buffer of normal clients (see client-output-buffer-limit). Therefore, the output buffer can grow unlimitedly over time. As a result, the service is exhausted and the memory is unavailable. When password authentication is enabled on the Redis server, but no password is provided, the client can still cause the output buffer to grow from "NOAUTH" responses until the system will run out of memory. This issue has been patched in version 7.4.3. An additional workaround to mitigate this problem without patching the redis-server executable is to block access to prevent unauthenticated users from connecting to Redis. This can be done in different ways. Either using network access control tools like firewalls, iptables, security groups, etc, or enabling TLS and requiring users to authenticate using client side certificates. | ||||
| CVE-2025-0639 | 1 Gitlab | 1 Gitlab | 2025-04-29 | 6.5 Medium |
| An issue has been discovered affecting service availability via issue preview in GitLab CE/EE affecting all versions from 16.7 before 17.9.7, 17.10 before 17.10.5, and 17.11 before 17.11.1. | ||||
| CVE-2025-43857 | 2025-04-29 | 6.5 Medium | ||
| Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Prior to versions 0.5.7, 0.4.20, 0.3.9, and 0.2.5, there is a possibility for denial of service by memory exhaustion when net-imap reads server responses. At any time while the client is connected, a malicious server can send can send a "literal" byte count, which is automatically read by the client's receiver thread. The response reader immediately allocates memory for the number of bytes indicated by the server response. This should not be an issue when securely connecting to trusted IMAP servers that are well-behaved. It can affect insecure connections and buggy, untrusted, or compromised servers (for example, connecting to a user supplied hostname). This issue has been patched in versions 0.5.7, 0.4.20, 0.3.9, and 0.2.5. | ||||
| CVE-2025-46687 | 2025-04-29 | 5.6 Medium | ||
| quickjs-ng through 0.9.0 has a missing length check in JS_ReadString for a string, leading to a heap-based buffer overflow. QuickJS before 2025-04-26 is also affected. | ||||
| CVE-2022-22488 | 1 Ibm | 6 Power System Ac922 \(8335-gtg\), Power System Ac922 \(8335-gtg\) Firmware, Power System Ac922 \(8335-gth\) and 3 more | 2025-04-28 | 4.9 Medium |
| IBM OpenBMC OP910 and OP940 could allow a privileged user to cause a denial of service by uploading or deleting too many CA certificates in a short period of time. IBM X-Force ID: 2226337. | ||||
| CVE-2022-45471 | 1 Jetbrains | 1 Hub | 2025-04-28 | 3.5 Low |
| In JetBrains Hub before 2022.3.15181 Throttling was missed when sending emails to a particular email address | ||||
| CVE-2024-28870 | 1 Oisf | 1 Suricata | 2025-04-28 | 7.5 High |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine developed by the OISF and the Suricata community. When parsing an overly long SSH banner, Suricata can use excessive CPU resources, as well as cause excessive logging volume in alert records. This issue has been patched in versions 6.0.17 and 7.0.4. | ||||
| CVE-2025-32952 | 2025-04-25 | 6.5 Medium | ||
| Jmix is a set of libraries and tools to speed up Spring Boot data-centric application development. In versions 1.0.0 to 1.6.1 and 2.0.0 to 2.3.4, the local file storage implementation does not restrict the size of uploaded files. An attacker could exploit this by uploading excessively large files, potentially causing the server to run out of space and return HTTP 500 error, resulting in a denial of service. This issue has been patched in versions 1.6.2 and 2.4.0. A workaround is provided on the Jmix documentation website. | ||||
| CVE-2022-21698 | 4 Fedoraproject, Prometheus, Rdo Project and 1 more | 17 Extra Packages For Enterprise Linux, Fedora, Client Golang and 14 more | 2025-04-23 | 7.5 High |
| client_golang is the instrumentation library for Go applications in Prometheus, and the promhttp package in client_golang provides tooling around HTTP servers and clients. In client_golang prior to version 1.11.1, HTTP server is susceptible to a Denial of Service through unbounded cardinality, and potential memory exhaustion, when handling requests with non-standard HTTP methods. In order to be affected, an instrumented software must use any of `promhttp.InstrumentHandler*` middleware except `RequestsInFlight`; not filter any specific methods (e.g GET) before middleware; pass metric with `method` label name to our middleware; and not have any firewall/LB/proxy that filters away requests with unknown `method`. client_golang version 1.11.1 contains a patch for this issue. Several workarounds are available, including removing the `method` label name from counter/gauge used in the InstrumentHandler; turning off affected promhttp handlers; adding custom middleware before promhttp handler that will sanitize the request method given by Go http.Request; and using a reverse proxy or web application firewall, configured to only allow a limited set of methods. | ||||
| CVE-2022-23606 | 2 Envoyproxy, Redhat | 2 Envoy, Service Mesh | 2025-04-23 | 4.4 Medium |
| Envoy is an open source edge and service proxy, designed for cloud-native applications. When a cluster is deleted via Cluster Discovery Service (CDS) all idle connections established to endpoints in that cluster are disconnected. A recursion was introduced in the procedure of disconnecting idle connections that can lead to stack exhaustion and abnormal process termination when a cluster has a large number of idle connections. This infinite recursion causes Envoy to crash. Users are advised to upgrade. | ||||
| CVE-2022-24726 | 2 Istio, Redhat | 2 Istio, Service Mesh | 2025-04-23 | 7.5 High |
| Istio is an open platform to connect, manage, and secure microservices. In affected versions the Istio control plane, istiod, is vulnerable to a request processing error, allowing a malicious attacker that sends a specially crafted message which results in the control plane crashing when the validating webhook for a cluster is exposed publicly. This endpoint is served over TLS port 15017, but does not require any authentication from the attacker. For simple installations, Istiod is typically only reachable from within the cluster, limiting the blast radius. However, for some deployments, especially [external istiod](https://istio.io/latest/docs/setup/install/external-controlplane/) topologies, this port is exposed over the public internet. This issue has been patched in versions 1.13.2, 1.12.5 and 1.11.8. Users are advised to upgrade. Users unable to upgrade should disable access to a validating webhook that is exposed to the public internet or restrict the set of IP addresses that can query it to a set of known, trusted entities. | ||||
| CVE-2022-24839 | 2 Nekohtml Project, Oracle | 2 Nekohtml, Weblogic Server | 2025-04-23 | 7.5 High |
| org.cyberneko.html is an html parser written in Java. The fork of `org.cyberneko.html` used by Nokogiri (Rubygem) raises a `java.lang.OutOfMemoryError` exception when parsing ill-formed HTML markup. Users are advised to upgrade to `>= 1.9.22.noko2`. Note: The upstream library `org.cyberneko.html` is no longer maintained. Nokogiri uses its own fork of this library located at https://github.com/sparklemotion/nekohtml and this CVE applies only to that fork. Other forks of nekohtml may have a similar vulnerability. | ||||
| CVE-2022-24863 | 1 Http-swagger Project | 1 Http-swagger | 2025-04-23 | 7.5 High |
| http-swagger is an open source wrapper to automatically generate RESTful API documentation with Swagger 2.0. In versions of http-swagger prior to 1.2.6 an attacker may perform a denial of service attack consisting of memory exhaustion on the host system. The cause of the memory exhaustion is down to improper handling of http methods. Users are advised to upgrade. Users unable to upgrade may to restrict the path prefix to the "GET" method as a workaround. | ||||