Total
78 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68077 | 1 Apache | 1 Qpid Broker-j | 2026-08-06 | 6.5 Medium |
| An authenticated attacker can craft a disposition frame with large or illegal ranges causing excessive CPU usage due to naive range handling, leading to denial of service. This issue affects Apache Qpid Broker-J: through 10.0.1. Users are recommended to upgrade to version 10.1.0, which fixes the issue. | ||||
| CVE-2026-20301 | 2026-08-05 | 8.6 High | ||
| A vulnerability in the Extensible Messaging Client Protocol (XMCP), also referred to as the External Client protocol, of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of malformed XMCP packets. An attacker could exploit this vulnerability by sending a malformed XMCP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload unexpectedly, resulting in a DoS condition. The attacker does not need the XMCP client username to exploit this vulnerability. | ||||
| CVE-2026-67554 | 2026-08-05 | 6.5 Medium | ||
| An authenticated attacker can craft a disposition frame with large or illegal ranges causing excessive CPU usage due to naive range handling, leading to denial of service. This issue affects Apache Qpid Proton-Dotnet: through 1.0.0. Users are recommended to upgrade to version 1.1.0, which fixes the issue. | ||||
| CVE-2026-66276 | 1 Apache | 1 Qpid Proton-j | 2026-08-05 | N/A |
| An authenticated attacker can craft a disposition frame with large or illegal ranges causing excessive CPU usage due to naive range handling, leading to denial of service. This issue affects Apache Qpid Proton-J: through 0.34.1. Users are recommended to upgrade to version 0.35.0, which fixes the issue. | ||||
| CVE-2026-11972 | 1 Python | 1 Cpython | 2026-08-05 | 6.5 Medium |
| When using the "tarfile" module with a file opened in "streaming mode" (mode="r|") the tarfile module did not properly handle EOF, making archive parsing take exponentially longer. | ||||
| CVE-2026-3276 | 1 Python | 1 Cpython | 2026-08-05 | 5.3 Medium |
| unicodedata.normalize() can take excessive CPU time when processing specially crafted Unicode input containing long runs of combining characters with alternating Canonical Combining Class values. This affects all normalization forms. | ||||
| CVE-2026-15830 | 1 Djangoproject | 1 Django | 2026-08-04 | 5.3 Medium |
| An issue was discovered in Django 5.2 before 5.2.17 and 6.0 before 6.0.8. GeoDjango's `django.contrib.gis.geos.GEOSGeometry` is subject to a potential denial-of-service when parsing deeply nested `GEOMETRYCOLLECTION` objects supplied as well-known text (WKT), well-known binary (WKB), or hex-encoded WKB, which triggers unbounded recursion and a segmentation fault in the underlying GEOS library. Spatial field lookups and the `django.contrib.gis.forms.GeometryField` form field are also affected. Earlier, unsupported Django series (such as 5.1.x, 5.0.x, and 4.2.x) were not evaluated and may also be affected. Django would like to thank Andrew MacPherson and kimchunbok_ for reporting this issue. | ||||
| CVE-2026-67312 | 1 Axios | 1 Axios | 2026-08-04 | 7.5 High |
| axios versions from 0.28.0 before 0.33.0 and from 1.0.0 before 1.18.0 contain uncontrolled recursion in formDataToJSON (exposed as axios.formToJSON() and used internally when serializing FormData with Content-Type: application/json). When an application passes attacker-controlled FormData field names, a field name with thousands of nested bracket-delimited segments causes unbounded recursion in buildPath(), exhausting the JavaScript call stack (RangeError: Maximum call stack size exceeded) and causing denial of service for that request, or process termination in applications without appropriate error handling. | ||||
| CVE-2024-46862 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: soc-acpi-intel-mtl-match: add missing empty item There is no links_num in struct snd_soc_acpi_mach {}, and we test !link->num_adr as a condition to end the loop in hda_sdw_machine_select(). So an empty item in struct snd_soc_acpi_link_adr array is required. | ||||
| CVE-2026-7260 | 1 Php Group | 1 Php | 2026-08-03 | 5.5 Medium |
| Circular symbolic links in phar archives could lead to unbounded recursion, exhausting the C stack and crashing the PHP process, in PHP versions from 8.2.* before 8.2.33, from 8.3.* before 8.3.33, from 8.4.* before 8.4.24, and from 8.5.* before 8.5.9. | ||||
| CVE-2026-64264 | 1 Linux | 1 Linux Kernel | 2026-08-02 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fuse-uring: fix EFAULT clobber in fuse_uring_commit copy_from_user() returns the number of bytes not copied as an unsigned residual on failure (1..sizeof(struct fuse_out_header)). fuse_uring_commit stores that residual in ssize_t err, sets req->out.h.error to -EFAULT, then jumps to out: with err still holding the positive residual. err = copy_from_user(&req->out.h, &ent->headers->in_out, sizeof(req->out.h)); if (err) { req->out.h.error = -EFAULT; goto out; /* err is the positive residual */ } ... out: fuse_uring_req_end(ent, req, err); fuse_uring_req_end() then runs if (error) req->out.h.error = error; which overwrites the just-assigned -EFAULT with the positive residual. FUSE callers such as fuse_simple_request() test err < 0 to detect failure, so the positive value is interpreted as success and the caller proceeds with an uninitialised or partial req->out.args. Fix by assigning err = -EFAULT in the failure branch before jumping to out, so fuse_uring_req_end() receives a negative errno and sets req->out.h.error to -EFAULT. | ||||
| CVE-2026-64289 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Set upper bounds on cache invalidation entry_num and entry_len iommufd_hwpt_invalidate() takes a user-controlled entry_num and entry_len, each bounded only by U32_MAX. An entry_len beyond the kernel's struct size makes the copy helper verify the extra bytes are zero, scanning that excess in one uninterruptible pass; a multi-gigabyte value over zeroed user memory trips the soft-lockup watchdog. A large entry_num is the other half, driving the backend invalidation loop with no reschedule. The VT-d nested handler, for one, copies each entry and flushes caches per iteration, pinning the CPU on a non-preemptible kernel. Cap both in the ioctl. entry_len is held under PAGE_SIZE, above any request struct, and entry_num under 1 << 19, the order of a hardware invalidation queue and well beyond any real batch, bounding the per-call loop length. | ||||
| CVE-2026-63891 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: property: Cap recursion depth in __tb_property_parse_dir() A DIRECTORY entry's value field is used as the dir_offset for a recursive call into __tb_property_parse_dir() with no depth counter. A crafted peer that chains DIRECTORY entries into a back-reference loop drives the parser until the kernel stack is exhausted and the guard page fires. Any untrusted XDomain peer (cable, dock, in-line inspector, adjacent host) that reaches the PROPERTIES_REQUEST control-plane exchange can trigger this without authentication. Thread a depth counter through tb_property_parse() and __tb_property_parse_dir(), and reject blocks that exceed TB_PROPERTY_MAX_DEPTH = 8. That is comfortably larger than any observed legitimate XDomain layout. Operators who do not need XDomain host-to-host discovery can disable the path entirely with thunderbolt.xdomain=0 on the kernel command line. | ||||
| CVE-2026-55731 | 1 Loytec | 8 L-dali, L-gate, L-inx and 5 more | 2026-07-27 | N/A |
| Unchecked input for loop condition (CWE-606) in the SNMP agent in Loytec LIP-ME201C, L-INX, L-GATE, L-ROC, L-IOB, L-DALI, L-VIS and L-PAD through 8.4.16 on LINX-A64 allows an unauthenticated remote attacker to cause persistent denial of service (CPU exhaustion) via a crafted SNMP GETNEXT request with a large OID component. | ||||
| CVE-2026-33800 | 1 Juniper Networks | 1 Junos Os | 2026-07-20 | 6.5 Medium |
| An Unchecked Input for Loop Condition vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on MX Series allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS).Micro-BFD session flaps generate respective up/down events which are queued by PFEMAN for processing. Especially in a Virtual-Chassis (VC) scenario with locality‑bias configured, processing takes a significant amount of time for each event. If these sessions keep flapping, new events are constantly added, and in turn PFEMAN never completes processing these events. This results in the PFEMAN watchdog timer expiring, which causes the FPC to crash and restart, representing a complete service outage. This issue only affects MX series FPCs up to and including MPC9, and LC2101/2103 and LC480. It does not affect MPC10/11, LC4800/9600, and MX304. This issue affects Junos OS on MX Series: * all versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S8, * 24.2 versions before 24.2R2-S4, * 24.4 versions before 24.4R2-S3, * 25.2 versions before 25.2R2. | ||||
| CVE-2026-59869 | 2 Nodeca, Redhat | 2 Js-yaml, Hummingbird | 2026-07-14 | 7.5 High |
| js-yaml is a JavaScript YAML parser and dumper. From 3.0.0 before 3.15.0 and from 4.0.0 before 4.3.0, js-yaml can spend quadratic CPU time parsing a document whose size grows only linearly when a chain of mappings uses merge keys where each mapping merges the previous one. This issue is fixed in versions 3.15.0 and 4.3.0. | ||||
| CVE-2026-59874 | 1 Isaacs | 1 Tar | 2026-07-10 | 7.5 High |
| node-tar is a tar archive manipulation library for Node.js. Prior to 7.5.18, tar.replace accepts a checksum-valid tar header with a negative base-256 encoded entry size, causing the archive scanner to make no progress while repeatedly parsing the same header. This issue is fixed in version 7.5.18. | ||||
| CVE-2026-59928 | 1 Lepture | 1 Mistune | 2026-07-10 | 7.5 High |
| Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.3.0, a Markdown document containing many repeated or distinct reference-link definitions causes quadratic work in src/mistune/block_parser.py and the ref_links environment dictionary handling, allowing denial of service through CPU exhaustion. This issue is fixed in version 3.3.0. | ||||
| CVE-2026-59935 | 1 Py-pdf | 1 Pypdf | 2026-07-10 | 6.5 Medium |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.14.2, an attacker can craft a PDF with a page content stream containing a not terminated inline image that uses the ASCII85 or ASCIIHex filters, causing an infinite loop during parsing such as when extracting page text. This issue is fixed in version 6.14.2. | ||||
| CVE-2026-55206 | 1 Miurahr | 1 Py7zr | 2026-07-09 | 6.5 Medium |
| py7zr is a Python-based library and utility to support 7zip archive compression, decompression, encryption and decryption. Prior to 1.1.3, PackInfo._read() in archiveinfo.py used an O(n^2) cumulative sum pattern for attacker-controlled numstreams values parsed from archive headers, allowing a crafted .7z archive to cause excessive CPU consumption during SevenZipFile.init() before extraction. This issue is fixed in version 1.1.3. | ||||