Filtered by vendor Apache
Subscriptions
Filtered by product Camel
Subscriptions
Total
133 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-94386 | 1 Apache | 2 Apache Camel, Camel | 2026-10-26 | 4.8 Medium |
| Use of Cache Containing Sensitive Information vulnerability in Apache Camel Oauth component. This issue affects Apache Camel: from 4.19.0 before 4.22.2. OAuthClientCredentialsTokenResolver obtains OAuth 2.0 bearer tokens through the client credentials grant on behalf of the components that authenticate their outbound calls with a named OAuth profile, such as camel-openai, camel-langchain4j-agent, camel-huggingface, camel-docling, camel-a2a, camel-spring-ai-chat and the IBM watsonx components, and of applications that call the OAuthClientAuthenticationFactory SPI directly. It kept the tokens it obtained in a static cache shared by every resolver instance and every CamelContext in the JVM, and keyed that cache on the token endpoint and the client ID only, although the token request also carries the client secret and the requested scope. Two profiles that share a token endpoint and a client ID but request different scopes, or authenticate with different client secrets, therefore mapped to the same cache entry: the profile that resolved a token first populated the entry, and the other profile was then handed that token, with no token request made under its own configuration, for as long as the token remained valid. Token caching is enabled by default, and pointing several profiles at one identity provider client is an ordinary use of the profile support rather than an opt-in to an insecure setting. The outcome is an outbound request that carries a token issued for another profile's scope, which can grant broader authority than the calling profile was configured for, or reach a service the token was not issued for; with identity providers that derive a token's audience from the requested scope, a different scope can mean a token for a different service altogether. A profile configured with a different client secret was likewise served the token obtained with the other secret, without authenticating with its own. The profiles are configured by the deployment, which is trusted, so no untrusted input reaches the cache: the party that gains is the service that receives a token it was not meant to receive, which, if hostile or compromised, can replay that token within its scope. Reaching the issue requires a deployment that defines more than one profile sharing a token endpoint and client ID while differing in scope or client secret. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. The 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, disable token caching on every OAuth profile that shares a token endpoint and client ID with another profile, by setting camel.oauth.NAME.cache-tokens=false for a named profile or camel.oauth.cache-tokens=false for the default one, so that each resolution requests a token with that profile’s own scope and client secret, at the cost of a token request on every resolution. Alternatively, register a separate client at the identity provider for each profile that needs a different scope or client secret, so that no two such profiles share a client ID. | ||||
| CVE-2026-90885 | 1 Apache | 2 Apache Camel, Camel | 2026-10-26 | 7.5 High |
| Improper Restriction of XML External Entity Reference vulnerability in Apache Camel Saxon component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.2. XQueryBuilder in camel-saxon, which evaluates expressions for the xquery language and the xquery component, built its default Saxon Configuration with parse options that set only a whitespace stripping rule, leaving the XML parser at its defaults, under which a DOCTYPE declaration is accepted and external entities are resolved. A message body of type String or byte[], or any body read as an InputStream, is first turned into a javax.xml.transform.Source by Camel's own XML type converters, which configure the parser against external entities, so those bodies were not affected. A body that was already a Source, however, was handed to Saxon unchanged, and when that Source still had to be parsed, as a stream-based Source does, Saxon parsed it with that Configuration, bypassing the protection applied to the other body types. Such a body arises, for example, after a route converts the message with convertBodyTo(Source.class), or when a component or processor earlier in the route sets the body to a stream-based Source. A DOCTYPE with an external subset, or an external entity, declared in that body was therefore resolved and expanded into the document the expression was evaluated against. An external sender whose XML reaches an XQuery expression or an xquery endpoint in that form could read files readable by the Camel process and cause the process to issue requests to hosts the document names. No non-default option is required, since the default Configuration is used whenever the route does not supply one of its own. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier, as well as the 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines, reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, do not evaluate XQuery over a message body that is already a javax.xml.transform.Source when that body carries XML from an untrusted sender, or set the configuration option of the xquery endpoint or language to a Saxon Configuration whose parse options refuse a DOCTYPE declaration and disable external entities and external DTD loading, which is what the fixed releases now apply by default. | ||||
| CVE-2026-95628 | 1 Apache | 2 Apache Camel, Camel | 2026-10-26 | 5.4 Medium |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Docling component. This issue affects Apache Camel: from 4.15.0 before 4.18.5, from 4.19.0 before 4.22.2. DoclingProducer builds the command line of the external docling tool and appends to it the custom arguments supplied in the CamelDoclingCustomArguments header, a list of strings whose flags the fix for CVE-2026-40047 restricted to an allowlist. That fix also introduced validatePathSafety to keep path-like argument values inside the intended directory, but the method only looked for relative traversal: it rejected a value containing a traversal sequence such as ../ and a value whose normalized form still held a .. element. It never checked whether a value was an absolute path, and an absolute path without traversal segments contains neither, so it passed unchanged. Every path-like value went through this check, whether it was a separate list element following its flag or was attached to the flag after an equals sign, so an absolute path was accepted in either form, for example as the directory given to the allowlisted --artifacts-path flag, which tells docling where to find its model artifacts. Such a value reached the docling command line as given, so a party able to choose the custom arguments could point the docling process at any directory the Camel process can access, outside the working directory that the check was meant to keep path values in, which is the outcome the CVE-2026-40047 fix set out to prevent. Only the CLI mode, which is the default, passes custom arguments to docling. The header belongs to the Camel header namespace, which consumers applying Camel's default header filtering, such as the JMS and Kafka consumers, remove from incoming messages, so the issue is reached where a route forwards externally influenced values into the header or where a consumer maps incoming headers without that filtering. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, do not build the CamelDoclingCustomArguments header from values that originate outside the deployment, remove that header from messages that arrive from outside before they reach a docling endpoint, and make sure that consumers which map incoming message headers drop the Camel header namespace, so that only the route itself chooses the custom arguments. | ||||
| CVE-2026-101259 | 1 Apache | 2 Apache Camel, Camel | 2026-10-26 | 5.3 Medium |
| Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel CoAP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.2. When the CoAP consumer could not build its response once the route had completed, CamelCoapResource caught the resulting exception and sent its message back to the CoAP client as the payload of a 5.00 Internal Server Error response. The typical case is a type conversion failure: the consumer converts the final message body to the byte[] payload, and the CamelCoapMaxAge and CamelCoapETag headers to their types, after the route has returned, and therefore outside the route's error handler. On the affected releases the message of such a failure names the class of the value being converted, carries the value's string form, and ends with the class name and message of the underlying cause, so a remote CoAP client could read internal detail about the deployment: class and package names, the string form of the value, such as the path of a file body, and whatever the cause carries, which in practice can include paths, host names and connection detail of a backend. The consumer had no option to suppress this, unlike the HTTP consumers, which offer a muteException option for that purpose. The exception raised by a failing route was not sent: the consumer did not check whether the exchange had failed, and answered a route failure with 2.05 Content and whatever body the message held at that point. Reaching the disclosure therefore requires a route whose completed response a remote client can make unconvertible, which depends on how the route is written. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier, and the 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines, reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. The upgrade is enough on its own: the new muteException consumer option defaults to true on all three fixed release lines, so the error response carries no payload without any configuration change. For deployments that cannot upgrade immediately, make sure the response can always be built once the route has completed: convert the body to byte[] or String as the last step of each route that consumes from a coap endpoint, for example with convertBodyTo, give the CamelCoapMaxAge and CamelCoapETag headers only values of their own types, and add an onException handler that marks the failure as handled and sets the response body explicitly, so that a conversion failure is raised and replaced inside the route rather than in the consumer. | ||||
| CVE-2026-95664 | 1 Apache | 2 Apache Camel, Camel | 2026-10-26 | 5.4 Medium |
| Improper Neutralization of Special Elements used in an Expression Language Statement ('Expression Language Injection') vulnerability in Apache Camel AWS2-s3 component. This issue affects Apache Camel: from 4.8.0 before 4.18.5, from 4.19.0 before 4.22.2. For the object it uploads, reads or deletes, the camel-aws2-s3 producer takes the key from the CamelAwsS3Key message header and falls back to the keyName option configured on the endpoint only when that header is absent. Since 4.8.0, AWS2S3Utils.determineKey() also passed the resulting value to the Simple language whenever it contained ${ or $simple{, so that a route could use a dynamic key, and the evaluation applied to a value taken from the header as well as to the configured option. The header is not route configuration, however: the aws2-s3 consumer sets CamelAwsS3Key on the exchanges it creates to the key of the object it read, that is, the name of the object in the bucket. In a route that does nothing more than consume from one aws2-s3 endpoint and produce to another, the name of each consumed object therefore reached the producer, and a name containing either marker was evaluated as an expression, although the route author never asked for any evaluation, and configuring keyName on the producer did not prevent it, because the header took precedence. A key that a route copied into the header from other message content was evaluated in the same way. Anyone able to choose the name of an object in a bucket that such a route consumes, typically a principal allowed to upload to that bucket, could therefore have Simple expressions of their choosing evaluated in the Camel process. The Simple language can read JVM system properties, environment variables and configuration properties, which commonly carry credentials, and, where camel-bean is on the classpath, invoke methods on beans in the registry. The evaluated result became the key the producer used, so reading a value back additionally required the ability to see object names in the destination bucket, while a method invocation took effect without it; together with the need to name an object in a consumed bucket, this is why the severity is assessed medium. The bucket name went through the same evaluation, but the consumer only ever places the bucket configured on its own endpoint in a bucket header, never a value derived from a remote object, so the bucket name was not reachable in this way. Releases before 4.8.0 used the key from the header as given and are not affected. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.8.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. After upgrading, a key or bucket name supplied through a message header is used literally, so a route that put an unevaluated Simple expression in the CamelAwsS3Key or CamelAwsS3OverrideBucketName header must evaluate it in the route instead, for example with setHeader and simple(), or configure it as the keyName or bucketName option of the endpoint. For deployments that cannot upgrade immediately, do not let a key derived from an object name or from other untrusted message content reach an aws2-s3 producer unchecked: in routes that pass exchanges from an aws2-s3 consumer to an aws2-s3 producer, either remove the CamelAwsS3Key header before the producer with removeHeader(“CamelAwsS3Key”), so that the keyName configured on the endpoint is used, or reject exchanges whose CamelAwsS3Key header contains ${ or $simple{. Configuring keyName alone is not a workaround, because the header takes precedence over it. As defence in depth, allow only trusted principals to write to buckets that Camel routes consume. | ||||
| CVE-2026-95663 | 1 Apache | 2 Apache Camel, Camel | 2026-10-26 | 4.8 Medium |
| Insufficient Session Expiration vulnerability in Apache Camel Keycloak component. This issue affects Apache Camel: from 4.16.0 before 4.18.5, from 4.19.0 before 4.22.2. When token introspection is enabled on the camel-keycloak KeycloakSecurityPolicy (useTokenIntrospection=true), the security processor validates the access token of a request by sending it to Keycloak's OAuth 2.0 token introspection endpoint, and accepts the token while the response reports it as active. The introspection endpoint reports a token as inactive once its exp (expiration) time has passed, so on this path the active flag is what enforces token expiry. Introspection results are cached by default (introspectionCacheEnabled=true, introspectionCacheTtl=60 seconds), and both cache implementations shipped with the component, ConcurrentMapTokenCache and CaffeineTokenCache, expired an entry a fixed time after it was inserted, without bounding that lifetime by the exp claim that the cached response already carried. KeycloakSecurityProcessor in turn checked only the active flag of the result, on every path that uses introspection, and never compared exp with the current time. A response cached shortly before the token expired was therefore served to later requests carrying the same token for up to the configured time-to-live after the token's expiry, and those requests were admitted with the roles and permissions the expired token had carried, although RFC 7662, which defines token introspection, states that a response containing exp must not be cached beyond that time. The access token is supplied by the caller with each request, typically as a bearer token in the Authorization header, so a caller holding a token that was valid moments earlier could keep using it after it expired, for as long as the cached entry lived. The window is bounded by introspectionCacheTtl, which is 60 seconds by default and 300 to 600 seconds where the documentation's recommendation for internal services was followed, and it opens only for a token that the same Camel process introspected and cached while the token was still active. The issue grants nothing beyond what the token already carried: it allows no token forgery and no privilege escalation, and token introspection is not enabled by default, which is why the severity is assessed medium. The local JWT verification path, used when introspection is disabled, is not affected by this issue. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.16.x, 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, set introspectionCacheEnabled=false on the KeycloakSecurityPolicy, so that every request is checked against the introspection endpoint, which reports an expired token as inactive, at the cost of one introspection call per request. Lowering introspectionCacheTtl only narrows the window and does not close it. | ||||
| CVE-2026-95629 | 1 Apache | 2 Apache Camel, Camel | 2026-10-26 | 5.4 Medium |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Docling component. This issue affects Apache Camel: from 4.15.0 before 4.18.5, from 4.19.0 before 4.22.2. DoclingProducer runs the external docling tool in CLI mode, the default, and tells it where to write the converted document through the --output flag. When the CamelDoclingOutputFilePath header was set, addOutputDirectoryArguments handed its value to that flag verbatim: the value was not normalized, an absolute path or a path containing .. segments was accepted as given, and no endpoint option could confine it to a directory. The custom-argument validation added by the fix for CVE-2026-40047 refuses the --output and -o flags in the CamelDoclingCustomArguments header and tells callers to choose the output directory with this header instead, so the one value that decides where docling writes reached the command line without any of the checks applied to custom arguments. Docling writes the conversion result, as Markdown, HTML, JSON or text, into that directory, naming the file after the input file, and the producer afterwards removes only its own temporary directory, so the file is left in place. A party able to set the header could therefore have conversion output created in any directory the Camel process can write to. The content of such a file is the conversion of the document carried by the message, so it is shaped by whoever supplies that document without being written byte for byte, and when the document content arrives in the message body the producer stores it under a random temporary name, which the output file then carries. The header belongs to the Camel header namespace, which consumers applying Camel's default header filtering, such as the JMS and Kafka consumers, remove from incoming messages, so the issue is reached where a route forwards externally influenced values into the header or where a consumer maps incoming headers without that filtering. The docling-serve mode does not use the header. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The fix adds an outputBaseDirectory endpoint option that is unset by default, so after upgrading, set it on every docling endpoint whose CamelDoclingOutputFilePath header can carry a value influenced from outside the deployment; without it the header is normalized but can still name any directory. The 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, do not build the CamelDoclingOutputFilePath header from values that originate outside the deployment, remove that header from messages that arrive from outside before they reach a docling endpoint, and make sure that consumers which map incoming message headers drop the Camel header namespace, so that only the route itself chooses the output directory. | ||||
| CVE-2026-79985 | 1 Apache | 2 Apache Camel, Camel | 2026-10-20 | 7.4 High |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel SMB component. This issue affects Apache Camel: from 4.2.0 before 4.18.5, from 4.19.0 before 4.22.1. The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the smb scheme. Its consumer walks the share listing on its own rather than through RemoteFileConsumer, skipping only the exact "." and ".." entries, so a name carrying traversal segments in any other form was concatenated unchecked. Reaching it requires a server that emits a listing name which is not a single path segment, which a conforming SMB2 implementation does not do; the exposure was corrected on the same basis as the other remote-file consumers rather than from a demonstrated proof of concept against this scheme. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream. | ||||
| CVE-2026-79984 | 1 Apache | 2 Apache Camel, Camel | 2026-10-20 | 7.4 High |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Mina SFTP component. This issue affects Apache Camel: from 4.18.0 before 4.18.5, from 4.19.0 before 4.22.1. The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the mina-sftp scheme, an alternative SFTP implementation whose consumer derives from the same RemoteFileConsumer base class and therefore inherited the same unconstrained resolution. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream. | ||||
| CVE-2026-79983 | 1 Apache | 2 Apache Camel, Camel | 2026-10-20 | 7.4 High |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel FTP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the ftp, ftps and sftp schemes, all of which are affected. The reporter demonstrated the issue end to end against an ftp endpoint, driving a Camel route with a malicious server whose LIST response named a file outside the polled directory. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream. | ||||
| CVE-2026-78165 | 1 Apache | 2 Apache Camel, Camel | 2026-10-20 | 8.8 High |
| Deserialization of Untrusted Data vulnerability in Apache Camel Spring Redis component. This issue affects Apache Camel: from 2.11.0 before 4.18.5, from 4.19.0 before 4.22.1. RedisConfiguration.getSerializer lazily built a bare JdkSerializationRedisSerializer whenever no serializer option was configured, and that instance was used for every read the component performs. Spring's implementation delegates through DeserializingConverter to DefaultDeserializer, which reads the bytes with a ConfigurableObjectInputStream and installs no java.io.ObjectInputFilter on the stream, so an arbitrary serialized class graph was materialised and its readObject method executed. RedisConsumer.setBody applied that serializer to the raw bytes of every message published to the subscribed channels, before the Exchange was constructed and therefore before any route logic could inspect the message, so an actor able to issue PUBLISH on a subscribed channel reached the deserialization sink directly. The same default serializer backed the RedisTemplate built by RedisConfiguration.createDefaultTemplate, so the producer read commands GET, HGET, HGETALL and HVALS deserialized whatever was stored in the Redis keyspace, and SpringRedisIdempotentRepository shared that template. Configuring a custom redisTemplate did not close the consumer path, because RedisConsumer.setBody reads getSerializer directly rather than the serializer attached to the template, so a deployment that had wired a String serializer into its own template remained exposed on the consumer side unless it also set the serializer option. The component never constructed a java.io.ObjectInputStream itself, which is why earlier passes over the Camel codebase for unfiltered Java deserialization did not reach it. The behaviour dates back to the introduction of the component, first released in 2.11.0, and was unchanged until this fix. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, set the JVM-wide jdk.serialFilter system property, which the affected code path honours because it reads through a java.io.ObjectInputStream, for example -Djdk.serialFilter=!java.net.**;java.**;javax.**;org.apache.camel.**;!* ; or set the serializer endpoint option to a serializer that does not use Java serialization, such as StringRedisSerializer, noting that this must be set as the serializer option and not only on a custom redisTemplate. As defence in depth, require authentication on the Redis instance and restrict which clients may publish to the subscribed channels, and do not expose a Redis instance consumed by Camel to untrusted networks. | ||||
| CVE-2026-80343 | 1 Apache | 2 Apache Camel, Camel | 2026-10-19 | 8.2 High |
| Improper Handling of Case Sensitivity vulnerability in Apache Camel Netty HTTP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The camel-netty-http security constraint compared the request path against the configured context path using a case-sensitive match, while the routing that dispatches the request to the endpoint did not apply the same rule. The two comparisons therefore disagreed for any path whose case differed from the configured value. An external caller could alter the case of a character in a path segment so that the security constraint no longer recognised the path as protected, while the request still dispatched to the same endpoint. The result is that the constraint is skipped and the protected route is reached without satisfying it. No credential, prior access or special configuration is required beyond being able to send a request to the consumer. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The constraint now matches the request path with the same case rules the dispatch uses, so the two can no longer disagree. For deployments that cannot upgrade immediately, place the authorization decision in front of the Camel consumer, for example in a reverse proxy that normalises the request path before forwarding. | ||||
| CVE-2026-78164 | 1 Apache | 2 Apache Camel, Camel | 2026-10-19 | 8.2 High |
| Improper Neutralization of Special Elements Used in a Template Engine and Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Camel HTTP, Netty HTTP, Undertow and Vert.x HTTP components. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The Camel HTTP producer families let an inbound message override the endpoint URI through the CamelHttpUri and CamelRestHttpUri headers, and then passed that message-supplied string through CamelContext.resolvePropertyPlaceholders() before using it. Property-placeholder resolution is a configuration-resolution facility, not a URI-parsing step: it reaches operating-system environment variables, JVM system properties, every PropertiesFunction registered on the classpath - including the secret functions - and, through camel-bean, the invocation of a no-argument method on any bean in the registry. Applying it to Exchange content therefore turned a URI string into a configuration- and bean-evaluation context. A route author opted into none of this: a plain static to("http://backend/api") was sufficient. Seven call sites were affected: HttpHelper.createURL and HttpHelper.createMethod in camel-http-common, HttpMethodHelper.createMethod in camel-http, VertxHttpHelper.resolveHttpURI in camel-vertx-http, UndertowHelper.createURL and UndertowHelper.createMethod in camel-undertow, and NettyHttpHelper.createURL in camel-netty-http. The bridgeEndpoint option did not bound the exposure: it suppresses the CamelHttpUri override in the createURL family but not in the createMethod family, so a route using the documented bridging configuration still resolved placeholders taken from the header, and CamelRestHttpUri was consumed before any bridgeEndpoint check in all four components. Only camel-http offered an opt-out, skipControlHeaders, which defaults to false. Reaching the headers did not always require header injection, because several Camel HTTP consumers populate CamelHttpUri from the request line themselves as a documented reverse-proxy feature. An unresolvable placeholder additionally produced a RuntimeExchangeException whose message echoed the URI, which distinguishes a set from an unset configuration key even where no outbound request is made. The behaviour predates the 4.x line. This advisory continues the alignment CAMEL-24282 applied to the toD and enrich dynamic-URI EIPs in 4.22.0, extending the same build-time-resolution contract to the HTTP producer components. Users should upgrade to version 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x releases stream should upgrade to 4.18.5. The 4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, strip the override headers at the trust boundary before the producer with removeHeader("CamelHttpUri") and removeHeader("CamelRestHttpUri"), or set skipControlHeaders=true on camel-http endpoints, which is the only component offering that option. Note that bridgeEndpoint=true is not a workaround: it suppresses the header override when the outbound URL is built but not when the header is re-parsed for the query string. Percent-encoding the placeholder delimiters is likewise not a mitigation for camel-netty-http, whose binding decodes the request path before the value reaches the header, so proxy or WAF rules written against the raw delimiters do not help there. As defence in depth, ensure consumers exposed to untrusted senders apply a strict inbound HeaderFilterStrategy over the Camel namespace, and resolve secrets through a vault rather than through environment variables or system properties that a placeholder can name. | ||||
| CVE-2026-84176 | 1 Apache | 2 Apache Camel, Camel | 2026-10-19 | 6.5 Medium |
| Permissive Cross-domain Policy with Untrusted Domains vulnerability in Apache Camel Platform HTTP Vertx component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. createCorsHandler() set Access-Control-Allow-Credentials: true outside the origin check, so the header went out on every response to a request carrying an Origin header, including responses to origins the handler had just decided not to allow. When camel.server.cors.origins is unset, the handler treats every origin as allowed and echoes the caller's own Origin back as Access-Control-Allow-Origin. Together those produce the credentialed any-origin configuration that the fetch specification refuses to express as a literal wildcard, which is precisely why reflecting the origin is the usual way around that rule. A page on any origin could therefore make credentialed cross-origin requests to the Camel endpoint and read the responses. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Access-Control-Allow-Credentials is now sent only when the request origin matched an origin the operator actually configured. With no origin list the origin is still reflected, as before, but credentials are not granted, and Vary: Origin is now set whenever the origin is reflected so that a shared cache cannot serve one origin's response to another. For deployments that cannot upgrade immediately, set camel.server.cors.origins to the explicit list of origins that need access rather than leaving it unset. | ||||
| CVE-2026-85243 | 1 Apache | 2 Apache Camel, Camel | 2026-10-19 | 5.9 Medium |
| Improper Validation of Integrity Check Value vulnerability in Apache Camel Crypto PGP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. unmarshal() verified the modification detection code only when the message was an OpenPGP symmetrically encrypted integrity protected data packet. The older symmetrically encrypted data packet carries no such code, and OpenPGP's CFB mode is malleable without one, so a message using that packet skipped the check altogether. The packet type is chosen by whoever produced the message, which left the sender - or anyone able to rewrite the message in transit - deciding whether the integrity check applied at all. The existing integrity option governs marshalling only and had no decrypt-side counterpart, so a deployment could not require integrity protection on the messages it accepted. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. A requireIntegrityProtection option, defaulting to true, now rejects a message that is not integrity protected. Note that signatureVerificationOption still defaults to optional, so a message carrying no signature is accepted; the two options together are what give a decrypted message authenticity and not only confidentiality. For deployments that cannot upgrade immediately, reject messages that do not use the integrity protected packet before they reach the data format. Routes that must interoperate with a sender still emitting the legacy packet should set requireIntegrityProtection=false after upgrading, and treat the decrypted content as unauthenticated. | ||||
| CVE-2026-88900 | 1 Apache | 2 Apache Camel, Camel | 2026-10-19 | 8.8 High |
| Deserialization of Untrusted Data vulnerability in Apache Camel Camel-Jgroups component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. JGroupsEndpoint.createExchange(Message), which CamelJGroupsReceiver calls for every message the jgroups consumer receives before the exchange is routed, set the exchange body from org.jgroups.Message.getObject(). For an ObjectMessage, which is the message type the Camel jgroups producer sends, JGroups Java-deserializes the payload through an ObjectInputStream on its own receive thread as the message arrives, and getObject() returns the resulting object. No java.io.ObjectInputFilter was applied on that path unless the deployment had set a JVM-wide serialization filter: camel-jgroups installed none, and the JGroups versions shipped with the affected releases apply none of their own, so any serializable class on the application classpath could be instantiated and its deserialization callbacks run. Unless a channel or the channelProperties option is configured, the consumer creates its channel with new JChannel(), the stock JGroups protocol stack, which multicasts over UDP without the AUTH protocol and without encryption, so any host able to reach the cluster's multicast group or bind port can join the cluster and send messages to the consumer without credentials. Such a host could send a crafted serialized object that leads to remote code execution in the Camel process when a usable deserialization gadget chain is present on the classpath, and no non-default option was required on the consumer. Because JGroups materializes the object before Camel's receiver runs, a check performed by Camel can only inspect the deserialized result and cannot stop code that runs during deserialization, so closing the issue also requires a control that applies before the payload is read, as described in the mitigation. Exploitation requires network access to the cluster's multicast group or bind port, which with the default UDP multicast transport means a host on an adjacent network, and a usable gadget chain on the classpath, which is why the severity is assessed as high rather than critical. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier, and the 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines, reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. | ||||
| CVE-2026-88901 | 1 Apache | 2 Apache Camel, Camel | 2026-10-19 | 8.2 High |
| Improper Restriction of XML External Entity Reference vulnerability in Apache Camel. This issue affects Apache Camel: from 4.7.0 before 4.18.5, from 4.19.0 before 4.22.1. Improper Restriction of XML External Entity Reference in the Smooks component (camel-smooks) in Apache Camel allows an attacker who supplies the XML message body to read local files or issue requests to internal network locations via an external entity declaration in that body. This issue affects Apache Camel: from 4.7.0 before 4.18.5, from 4.19.0 before 4.22.1. The Smooks data format (.unmarshal().smooks(...)) and the Smooks component (smooks:) parse the incoming XML body with the reader Smooks resolves by default, which is the Woodstox SAX parser. That reader resolves external general and parameter entities and loads external DTDs, and camel-smooks applied none of the parser hardening that the other Camel XML components apply. A DOCTYPE with an external subset, or an external general entity, declared in the XML document is therefore resolved and expanded while the body is unmarshalled, and the resolved content is bound into the unmarshalled result and returned on InOut routes. An external sender whose XML reaches a camel-smooks data format or endpoint could therefore read files readable by the Camel process and cause the process to issue requests to hosts the document names. No non-default option is required, since resolving external entities was the default behaviour. Configurations that declare their own reader - EDI, CSV, JSON, or a custom reader - do not use the XML reader and are not affected. Users are recommended to upgrade to version 4.18.5, 4.22.1 or 4.23.0, which fixes the issue. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. camel-smooks now parses the XML body with a javax.xml.parsers.DocumentBuilder that does not resolve external general or parameter entities and does not load external DTDs, and hands Smooks the resulting document, matching the secure XML processing configuration used by org.apache.camel.converter.jaxp.XmlConverter and the other Camel XML components. This hardening is applied only when the Smooks configuration parses XML with its default reader, so EDI, CSV, JSON and custom-reader configurations, and the marshalling direction, are unchanged. A new allowExternalEntities option, disabled by default, restores the previous behaviour for trusted legacy configurations that rely on external entity resolution. The camel-4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, do not apply camel-smooks to XML received from untrusted senders. | ||||
| CVE-2026-84180 | 1 Apache | 2 Apache Camel, Camel | 2026-10-19 | 5.3 Medium |
| Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Knative component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. When processing of an exchange failed on the consumer side, the Knative HTTP consumer wrote the resulting exception back to the remote caller as the response body, including its class name, message and stack trace. An external sender could therefore provoke a failure and read internal detail about the deployment: class and package names, file system or host names carried in exception messages, and the shape of the route. That detail is useful for building a more targeted attack, and where an exception message embeds configuration or connection strings it is disclosure in its own right. camel-knative was the remaining HTTP-family consumer that had not been aligned with the muteException behaviour established for the other HTTP consumers by CAMEL-23651. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The consumer now honours a muteException option that defaults to true, so a route failure returns an empty body with the error status rather than the exception. Set muteException=false to restore the previous output. For deployments that cannot upgrade immediately, add an onException handler that sets the response body explicitly, so that the framework never writes the exception back to the caller. | ||||
| CVE-2026-80344 | 1 Apache | 2 Apache Camel, Camel | 2026-10-19 | 8.2 High |
| Server-Side Request Forgery (SSRF) vulnerability in Apache Camel AS2 component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. In the AS2 protocol the sender of a message may request that the Message Disposition Notification be returned asynchronously to an address the sender supplies. camel-as2 took that address from the inbound message and used it as the destination for the outgoing receipt without constraining it to anything the deployment had configured. A remote partner therefore chose the host the Camel instance would connect to when delivering the MDN. That gives server-side request forgery from the position of the AS2 receiver, including reaching hosts that are only routable from inside the deployment's network, and where the outbound connection carries credentials configured for MDN delivery those credentials are presented to the attacker-chosen destination. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The asynchronous MDN destination is now constrained rather than taken verbatim from the inbound message. For deployments that cannot upgrade immediately, restrict outbound connectivity from the AS2 receiver to the partner endpoints it legitimately delivers receipts to, and do not attach credentials to MDN delivery that are valid for any host other than those partners. | ||||
| CVE-2026-84181 | 1 Apache | 2 Apache Camel, Camel | 2026-10-19 | 5.9 Medium |
| Improper Authentication vulnerability in Apache Camel Shiro component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The Shiro security processor skipped credential verification when the subject already bound to the current thread carried the same principal as the incoming exchange. Because the thread that carries a Camel exchange is drawn from a pool and reused across exchanges, a subject left bound by an earlier authenticated exchange could satisfy the check for a later one that presented no valid credentials of its own. The password on the incoming exchange was, in that case, never verified. The condition depends on thread reuse and on the principal matching, which is why it is not reached on every request, but it requires nothing of the attacker beyond sending a request naming a principal that is in active use. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The processor now verifies the presented credentials on every exchange rather than accepting a subject already bound to the thread. Setting alwaysReauthenticate=false restores the previous behaviour for deployments that depend on it. For deployments that cannot upgrade immediately, ensure the Shiro subject is cleared from the thread at the end of every exchange so that no subject can be inherited by a later one. | ||||