Total
15018 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-59733 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | 6.5 Medium |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, there's an implicit assumption that all image channels have the same pixel type (and size), and that if there are four channels, the first four are "B", "G", "R" and "A". The channel parsing code can be found in decode_header. The buffer td->uncompressed_data is allocated in decode_block based on the xsize, ysize and computed current_channel_offset. The function dwa_uncompress then assumes at [5] that if there are 4 channels, these are "B", "G", "R" and "A", and in the calculations at [6] and [7] that all channels are of the same type, which matches the type of the main color channels. If we set the main color channels to a 4-byte type and add duplicate or unknown channels of the 2-byte EXR_HALF type, then the addition at [7] will increment the pointer by 4-bytes * xsize * nb_channels, which will exceed the allocated buffer. We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2025-59731 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | N/A |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, the specified raw length of run-length-encoded data is not checked when using it to calculate the output data. We read rle_raw_size from the input file at [0], we decompress and decode into the buffer td->rle_raw_data of size rle_raw_size at [1], and then at [2] we will access entries in this buffer up to (td->xsize - 1) * (td->ysize - 1) + rle_raw_size / 2, which may exceed rle_raw_size. We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2025-59730 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | 6.5 Medium |
| When decoding a frame for a SANM file (ANIM v0 variant), the decoded data can be larger than the buffer allocated for it. Frames encoded with codec 48 can specify their resolution (width x height). A buffer of appropriate size is allocated depending on the resolution. This codec can encode the frame contents using a run-length encoding algorithm. There are no checks that the decoded frame fits in the allocated buffer, leading to a heap-buffer-overflow. process_frame_obj initializes the buffers based on the frame resolution: We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2025-59729 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | 6.8 Medium |
| When parsing the header for a DHAV file, there's an integer underflow in offset calculation that leads to reading the duration from before the start of the allocated buffer. If we load a DHAV file that is larger than MAX_DURATION_BUFFER_SIZE bytes (0x100000) for example 0x101000 bytes, then at [0] we have size = 0x101000. At [1] we have end_buffer_size = 0x100000, and at [2] we have end_buffer_pos = 0x1000. The loop then scans backwards through the buffer looking for the dhav tag; when it is found, we'll calculate end_pos based on a 32-bit offset read from the buffer. There is subsequently a check [3] that end_pos is within the section of the file that has been copied into end_buffer, but it only correctly handles the cases where end_pos is before the start of the file or after the section copied into end_buffer, and not the case where end_pos is within the the file, but before the section copied into end_buffer. If we provide such an offset, (end_pos - end_buffer_pos) can underflow, resulting in the subsequent access at [4] occurring before the beginning of the allocation. We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2025-59728 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | 6.5 Medium |
| When calculating the content path in handling of MPEG-DASH manifests, there's an out-of-bounds NUL-byte write one byte past the end of the buffer.When we call xmlNodeGetContent below [0], it returns a buffer precisely allocated to match the string length, using strdup internally. If this buffer is not an empty string, it is assigned to root_url at [1].If the last (non-NUL) byte in this buffer is not '/' then we append '/' in-place at [2]. This will write two bytes into the buffer, starting at the last valid byte in the buffer, writing the NUL byte beyond the end of the allocated buffer. We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2024-20496 | 1 Cisco | 2 Sd-wan Vedge Cloud, Sd-wan Vedge Router | 2026-04-15 | 6.1 Medium |
| A vulnerability in the UDP packet validation code of Cisco SD-WAN vEdge Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected system. This vulnerability is due to incorrect handling of a specific type of malformed UDP packet. An attacker in a machine-in-the-middle position could exploit this vulnerability by sending crafted UDP packets to an affected device. A successful exploit could allow the attacker to cause the device to reboot, resulting in a DoS condition on the affected system. | ||||
| CVE-2024-0143 | 2026-04-15 | 6.8 Medium | ||
| NVIDIA nvJPEG2000 library contains a vulnerability where an attacker can cause an out-of-bounds write issue by means of a specially crafted JPEG2000 file. A successful exploit of this vulnerability might lead to code execution and data tampering. | ||||
| CVE-2025-54957 | 1 Dolby | 1 Udc | 2026-04-15 | 9.8 Critical |
| An issue was discovered in Dolby UDC 4.5 through 4.13. A crash of the DD+ decoder process can occur when a malformed DD+ bitstream is processed. When Evolution data is processed by evo_priv.c from the DD+ bitstream, the decoder writes that data into a buffer. The length calculation for a write can overflow due to an integer wraparound. This can lead to the allocated buffer being too small, and the out-of-bounds check of the subsequent write to be ineffective, leading to an out-of-bounds write. | ||||
| CVE-2025-24528 | 2 Mit, Redhat | 5 Kerberos 5, Discovery, Enterprise Linux and 2 more | 2026-04-15 | 7.1 High |
| In MIT Kerberos 5 (aka krb5) before 1.22 (with incremental propagation), there is an integer overflow for a large update size to resize() in kdb_log.c. An authenticated attacker can cause an out-of-bounds write and kadmind daemon crash. | ||||
| CVE-2024-36324 | 1 Amd | 25 Amd Ryzen™ Ai 300 Series Processors, Radeon Pro V520, Radeon Pro V620 and 22 more | 2026-04-15 | 8.8 High |
| Improper input validation in AMD Graphics Driver could allow an attacker to supply a specially crafted pointer, potentially leading to arbitrary code execution. | ||||
| CVE-2025-5898 | 1 Gnu | 1 Pspp | 2026-04-15 | 5.3 Medium |
| A vulnerability classified as critical has been found in GNU PSPP 82fb509fb2fedd33e7ac0c46ca99e108bb3bdffb. Affected is the function parse_variables_option of the file utilities/pspp-convert.c. The manipulation leads to out-of-bounds write. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2025-5943 | 1 Microdicom | 1 Dicom Viewer | 2026-04-15 | 8.8 High |
| MicroDicom DICOM Viewer suffers from an out-of-bounds write vulnerability. Remote attackers are able to exploit this issue to potentially execute arbitrary code on affected installations of DICOM Viewer. User interaction is required to exploit the vulnerability in that the user must either visit a malicious website or open a malicious DICOM file locally. | ||||
| CVE-2025-30015 | 2026-04-15 | 4.1 Medium | ||
| Due to incorrect memory address handling in ABAP SQL of SAP NetWeaver and ABAP Platform (Application Server ABAP), an authenticated attacker with high privileges could execute certain forms of SQL queries leading to manipulation of content in the output variable. This vulnerability has a low impact on the confidentiality, integrity and the availability of the application. | ||||
| CVE-2025-48499 | 1 Fujifilm | 8 Apeos 2150, Apeos 2350, Docuprint M115 W and 5 more | 2026-04-15 | 5.3 Medium |
| Out-of-bounds write vulnerability exists in FUJIFILM Business Innovation MFPs. A specially crafted IPP (Internet Printing Protocol) or LPD (Line Printer Daemon) packet may cause a denial-of-service (DoS) condition on an affected MFP. Resetting the MFP is required to recover from the denial-of-service (DoS) condition. | ||||
| CVE-2025-12050 | 1 Insyde | 1 Insydeh2o | 2026-04-15 | 7.8 High |
| The drivers in the tool packages use RTL_QUERY_REGISTRY_DIRECT flag to read a registry value to which an untrusted user-mode application may be able to cause a buffer overflow. | ||||
| CVE-2025-52939 | 2026-04-15 | N/A | ||
| Out-of-bounds Write vulnerability in dail8859 NotepadNext (src/lua/src modules). This vulnerability is associated with program files ldebug.C, lvm.C. This issue affects NotepadNext: through v0.11. | ||||
| CVE-2025-53524 | 1 Fujielectric | 1 Monitouch V-sft | 2026-04-15 | 7.8 High |
| Fuji Electric Monitouch V-SFT-6 is vulnerable to an out-of-bounds write while processing a specially crafted project file, which may allow an attacker to execute arbitrary code. | ||||
| CVE-2025-3873 | 2026-04-15 | N/A | ||
| The following APIs for the Silcon Labs SiWx91x prior to vesion 3.4.0 failed to check the size of the output buffer of the caller which could lead to data corruption on the host (Cortex-M4) application. sl_si91x_aes sl_si91x_gcm sl_si91x_ccm sl_si91x_sha | ||||
| CVE-2024-55412 | 2026-04-15 | 7.8 High | ||
| A vulnerability exits in driver snxpsamd.sys in SUNIX Serial Driver x64 - 10.1.0.0, which allows low-privileged users to read and write arbitary i/o port via specially crafted IOCTL requests . This can be exploited for privilege escalation, code execution under high privileges, and information disclosure. These signed drivers can also be used to bypass the Microsoft driver-signing policy to deploy malicious code. | ||||
| CVE-2024-8894 | 2026-04-15 | N/A | ||
| Out-of-bounds Write vulnerability was discovered in Open Design Alliance Drawings SDK before 2025.10. Reading crafted DWF file and missing proper checks on received SectionIterator data can trigger an unhandled exception. This can allow attackers to cause a crash, potentially enabling a denial-of-service attack (Crash, Exit, or Restart) or possible code execution. | ||||