Filtered by vendor Linux
Subscriptions
Total
18623 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43344 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix die ID init and look up bugs In snbep_pci2phy_map_init(), in the nr_node_ids > 8 path, uncore_device_to_die() may return -1 when all CPUs associated with the UBOX device are offline. Remove the WARN_ON_ONCE(die_id == -1) check for two reasons: - The current code breaks out of the loop. This is incorrect because pci_get_device() does not guarantee iteration in domain or bus order, so additional UBOX devices may be skipped during the scan. - Returning -EINVAL is incorrect, since marking offline buses with die_id == -1 is expected and should not be treated as an error. Separately, when NUMA is disabled on a NUMA-capable platform, pcibus_to_node() returns NUMA_NO_NODE, causing uncore_device_to_die() to return -1 for all PCI devices. As a result, spr_update_device_location(), used on Intel SPR and EMR, ignores the corresponding PMON units and does not add them to the RB tree. Fix this by using uncore_pcibus_to_dieid(), which retrieves topology from the UBOX GIDNIDMAP register and works regardless of whether NUMA is enabled in Linux. This requires snbep_pci2phy_map_init() to be added in spr_uncore_pci_init(). Keep uncore_device_to_die() only for the nr_node_ids > 8 case, where NUMA is expected to be enabled. | ||||
| CVE-2026-43316 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: solo6x10: Check for out of bounds chip_id Clang with CONFIG_UBSAN_SHIFT=y noticed a condition where a signed type (literal "1" is an "int") could end up being shifted beyond 32 bits, so instrumentation was added (and due to the double is_tw286x() call seen via inlining), Clang decides the second one must now be undefined behavior and elides the rest of the function[1]. This is a known problem with Clang (that is still being worked on), but we can avoid the entire problem by actually checking the existing max chip ID, and now there is no runtime instrumentation added at all since everything is known to be within bounds. Additionally use an unsigned value for the shift to remove the instrumentation even without the explicit bounds checking. [hverkuil: fix checkpatch warning for is_tw286x] | ||||
| CVE-2026-43225 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix memory leak on failure path cfg80211_inform_bss_frame() may return NULL on failure. In that case, the allocated buffer 'buf' is not freed and the function returns early, leading to potential memory leak. Fix this by ensuring that 'buf' is freed on both success and failure paths. | ||||
| CVE-2026-43230 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/rds: Clear reconnect pending bit When canceling the reconnect worker, care must be taken to reset the reconnect-pending bit. If the reconnect worker has not yet been scheduled before it is canceled, the reconnect-pending bit will stay on forever. | ||||
| CVE-2026-43226 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/rds: No shortcut out of RDS_CONN_ERROR RDS connections carry a state "rds_conn_path::cp_state" and transitions from one state to another and are conditional upon an expected state: "rds_conn_path_transition." There is one exception to this conditionality, which is "RDS_CONN_ERROR" that can be enforced by "rds_conn_path_drop" regardless of what state the condition is currently in. But as soon as a connection enters state "RDS_CONN_ERROR", the connection handling code expects it to go through the shutdown-path. The RDS/TCP multipath changes added a shortcut out of "RDS_CONN_ERROR" straight back to "RDS_CONN_CONNECTING" via "rds_tcp_accept_one_path" (e.g. after "rds_tcp_state_change"). A subsequent "rds_tcp_reset_callbacks" can then transition the state to "RDS_CONN_RESETTING" with a shutdown-worker queued. That'll trip up "rds_conn_init_shutdown", which was never adjusted to handle "RDS_CONN_RESETTING" and subsequently drops the connection with the dreaded "DR_INV_CONN_STATE", which leaves "RDS_SHUTDOWN_WORK_QUEUED" on forever. So we do two things here: a) Don't shortcut "RDS_CONN_ERROR", but take the longer path through the shutdown code. b) Add "RDS_CONN_RESETTING" to the expected states in "rds_conn_init_shutdown" so that we won't error out and get stuck, if we ever hit weird state transitions like this again." | ||||
| CVE-2026-43228 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hfs: Replace BUG_ON with error handling for CNID count checks In a06ec283e125 next_id, folder_count, and file_count in the super block info were expanded to 64 bits, and BUG_ONs were added to detect overflow. This triggered an error reported by syzbot: if the MDB is corrupted, the BUG_ON is triggered. This patch replaces this mechanism with proper error handling and resolves the syzbot reported bug. Singed-off-by: Jori Koolstra <jkoolstra@xs4all.nl> | ||||
| CVE-2026-43031 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: xilinx: axienet: Fix BQL accounting for multi-BD TX packets When a TX packet spans multiple buffer descriptors (scatter-gather), axienet_free_tx_chain sums the per-BD actual length from descriptor status into a caller-provided accumulator. That sum is reset on each NAPI poll. If the BDs for a single packet complete across different polls, the earlier bytes are lost and never credited to BQL. This causes BQL to think bytes are permanently in-flight, eventually stalling the TX queue. The SKB pointer is stored only on the last BD of a packet. When that BD completes, use skb->len for the byte count instead of summing per-BD status lengths. This matches netdev_sent_queue(), which debits skb->len, and naturally survives across polls because no partial packet contributes to the accumulator. | ||||
| CVE-2026-43115 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: srcu: Use irq_work to start GP in tiny SRCU Tiny SRCU's srcu_gp_start_if_needed() directly calls schedule_work(), which acquires the workqueue pool->lock. This causes a lockdep splat when call_srcu() is called with a scheduler lock held, due to: call_srcu() [holding pi_lock] srcu_gp_start_if_needed() schedule_work() -> pool->lock workqueue_init() / create_worker() [holding pool->lock] wake_up_process() -> try_to_wake_up() -> pi_lock Also add irq_work_sync() to cleanup_srcu_struct() to prevent a use-after-free if a queued irq_work fires after cleanup begins. Tested with rcutorture SRCU-T and no lockdep warnings. [ Thanks to Boqun for similar fix in patch "rcu: Use an intermediate irq_work to start process_srcu()" ] | ||||
| CVE-2026-43223 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: pvrusb2: fix URB leak in pvr2_send_request_ex When pvr2_send_request_ex() submits a write URB successfully but fails to submit the read URB (e.g. returns -ENOMEM), it returns immediately without waiting for the write URB to complete. Since the driver reuses the same URB structure, a subsequent call to pvr2_send_request_ex() attempts to submit the still-active write URB, triggering a 'URB submitted while active' warning in usb_submit_urb(). Fix this by ensuring the write URB is unlinked and waited upon if the read URB submission fails. | ||||
| CVE-2026-43224 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/zcrx: fix sgtable leak on mapping failures In an unlikely case when io_populate_area_dma() fails, which could only happen on a PAGE_POOL_32BIT_ARCH_WITH_64BIT_DMA machine, io_zcrx_map_area() will have an initialised and not freed table. It was supposed to be cleaned up in the error path, but !is_mapped prevents that. | ||||
| CVE-2026-43222 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: AV1: Fix tile info buffer size Each tile info is composed of: row_sb, col_sb, start_pos and end_pos (4 bytes each). So the total required memory is AV1_MAX_TILES * 16 bytes. Use the correct #define to allocate the buffer and avoid writing tile info in non-allocated memory. | ||||
| CVE-2026-43227 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: clocksource/drivers/sh_tmu: Always leave device running after probe The TMU device can be used as both a clocksource and a clockevent provider. The driver tries to be smart and power itself on and off, as well as enabling and disabling its clock when it's not in operation. This behavior is slightly altered if the TMU is used as an early platform device in which case the device is left powered on after probe, but the clock is still enabled and disabled at runtime. This has worked for a long time, but recent improvements in PREEMPT_RT and PROVE_LOCKING have highlighted an issue. As the TMU registers itself as a clockevent provider, clockevents_register_device(), it needs to use raw spinlocks internally as this is the context of which the clockevent framework interacts with the TMU driver. However in the context of holding a raw spinlock the TMU driver can't really manage its power state or clock with calls to pm_runtime_*() and clk_*() as these calls end up in other platform drivers using regular spinlocks to control power and clocks. This mix of spinlock contexts trips a lockdep warning. ============================= [ BUG: Invalid wait context ] 6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 Not tainted ----------------------------- swapper/0/0 is trying to lock: ffff000008c9e180 (&dev->power.lock){-...}-{3:3}, at: __pm_runtime_resume+0x38/0x88 other info that might help us debug this: context-{5:5} 1 lock held by swapper/0/0: ccree e6601000.crypto: ARM CryptoCell 630P Driver: HW version 0xAF400001/0xDCC63000, Driver version 5.0 #0: ffff8000817ec298 ccree e6601000.crypto: ARM ccree device initialized (tick_broadcast_lock){-...}-{2:2}, at: __tick_broadcast_oneshot_control+0xa4/0x3a8 stack backtrace: CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 PREEMPT Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) Call trace: show_stack+0x14/0x1c (C) dump_stack_lvl+0x6c/0x90 dump_stack+0x14/0x1c __lock_acquire+0x904/0x1584 lock_acquire+0x220/0x34c _raw_spin_lock_irqsave+0x58/0x80 __pm_runtime_resume+0x38/0x88 sh_tmu_clock_event_set_oneshot+0x84/0xd4 clockevents_switch_state+0xfc/0x13c tick_broadcast_set_event+0x30/0xa4 __tick_broadcast_oneshot_control+0x1e0/0x3a8 tick_broadcast_oneshot_control+0x30/0x40 cpuidle_enter_state+0x40c/0x680 cpuidle_enter+0x30/0x40 do_idle+0x1f4/0x280 cpu_startup_entry+0x34/0x40 kernel_init+0x0/0x130 do_one_initcall+0x0/0x230 __primary_switched+0x88/0x90 For non-PREEMPT_RT builds this is not really an issue, but for PREEMPT_RT builds where normal spinlocks can sleep this might be an issue. Be cautious and always leave the power and clock running after probe. | ||||
| CVE-2026-43231 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: radio-keene: fix memory leak in error path Fix a memory leak in usb_keene_probe(). The v4l2 control handler is initialized and controls are added, but if v4l2_device_register() or video_register_device() fails afterward, the handler was never freed, leaking memory. Add v4l2_ctrl_handler_free() call in the err_v4l2 error path to ensure the control handler is properly freed for all error paths after it is initialized. | ||||
| CVE-2026-43229 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix device cleanup order to prevent kernel panic Move video device unregistration to the beginning of the remove function to ensure all video operations are stopped before cleaning up the worker thread and disabling PM runtime. This prevents hardware register access after the device has been powered down. In polling mode, the hrtimer periodically triggers wave5_vpu_timer_callback() which queues work to the kthread worker. The worker executes wave5_vpu_irq_work_fn() which reads hardware registers via wave5_vdi_read_register(). The original cleanup order disabled PM runtime and powered down hardware before unregistering video devices. When autosuspend triggers and powers off the hardware, the video devices are still registered and the worker thread can still be triggered by the hrtimer, causing it to attempt reading registers from powered-off hardware. This results in a bus error (synchronous external abort) and kernel panic. This causes random kernel panics during encoding operations: Internal error: synchronous external abort: 0000000096000010 [#1] PREEMPT SMP Modules linked in: wave5 rpmsg_ctrl rpmsg_char ... CPU: 0 UID: 0 PID: 1520 Comm: vpu_irq_thread Tainted: G M W pc : wave5_vdi_read_register+0x10/0x38 [wave5] lr : wave5_vpu_irq_work_fn+0x28/0x60 [wave5] Call trace: wave5_vdi_read_register+0x10/0x38 [wave5] kthread_worker_fn+0xd8/0x238 kthread+0x104/0x120 ret_from_fork+0x10/0x20 Code: aa1e03e9 d503201f f9416800 8b214000 (b9400000) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: synchronous external abort: Fatal exception | ||||
| CVE-2026-43267 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fix potential zero beacon interval in beacon tracking During fuzz testing, it was discovered that bss_conf->beacon_int might be zero, which could result in a division by zero error in subsequent calculations. Set a default value of 100 TU if the interval is zero to ensure stability. | ||||
| CVE-2026-43268 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: pretend special inodes as regular files Since commit af153bb63a33 ("vfs: catch invalid modes in may_open()") requires any inode be one of S_IFDIR/S_IFLNK/S_IFREG/S_IFCHR/S_IFBLK/ S_IFIFO/S_IFSOCK type, use S_IFREG for special inodes. | ||||
| CVE-2026-43034 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: set backing store type from query type bnxt_hwrm_func_backing_store_qcaps_v2() stores resp->type from the firmware response in ctxm->type and later uses that value to index fixed backing-store metadata arrays such as ctx_arr[] and bnxt_bstore_to_trace[]. ctxm->type is fixed by the current backing-store query type and matches the array index of ctx->ctx_arr. Set ctxm->type from the current loop variable instead of depending on resp->type. Also update the loop to advance type from next_valid_type in the for statement, which keeps the control flow simpler for non-valid and unchanged entries. | ||||
| CVE-2026-43117 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: tracepoints: get correct superblock from dentry in event btrfs_sync_file() If overlay is used on top of btrfs, dentry->d_sb translates to overlay's super block and fsid assignment will lead to a crash. Use file_inode(file)->i_sb to always get btrfs_sb. | ||||
| CVE-2026-43132 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-verity: correctly handle dm_bufio_client_create() failure If either of the calls to dm_bufio_client_create() in verity_fec_ctr() fails, then dm_bufio_client_destroy() is later called with an ERR_PTR() argument. That causes a crash. Fix this. | ||||
| CVE-2026-43266 | 1 Linux | 2 Kernel, Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: EFI/CPER: don't go past the ARM processor CPER record buffer There's a logic inside GHES/CPER to detect if the section_length is too small, but it doesn't detect if it is too big. Currently, if the firmware receives an ARM processor CPER record stating that a section length is big, kernel will blindly trust section_length, producing a very long dump. For instance, a 67 bytes record with ERR_INFO_NUM set 46198 and section length set to 854918320 would dump a lot of data going a way past the firmware memory-mapped area. Fix it by adding a logic to prevent it to go past the buffer if ERR_INFO_NUM is too big, making it report instead: [Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1 [Hardware Error]: event severity: recoverable [Hardware Error]: Error 0, type: recoverable [Hardware Error]: section_type: ARM processor error [Hardware Error]: MIDR: 0xff304b2f8476870a [Hardware Error]: section length: 854918320, CPER size: 67 [Hardware Error]: section length is too big [Hardware Error]: firmware-generated error record is incorrect [Hardware Error]: ERR_INFO_NUM is 46198 [ rjw: Subject and changelog tweaks ] | ||||