Total
328 CVE
CVE | Vendors | Products | Updated | CVSS v3.1 |
---|---|---|---|---|
CVE-2024-36975 | 2025-05-04 | 5.5 Medium | ||
In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: Do not use WARN when encode fails When asn1_encode_sequence() fails, WARN is not the correct solution. 1. asn1_encode_sequence() is not an internal function (located in lib/asn1_encode.c). 2. Location is known, which makes the stack trace useless. 3. Results a crash if panic_on_warn is set. It is also noteworthy that the use of WARN is undocumented, and it should be avoided unless there is a carefully considered rationale to use it. Replace WARN with pr_err, and print the return value instead, which is only useful piece of information. | ||||
CVE-2024-36964 | 2025-05-04 | 5.5 Medium | ||
In the Linux kernel, the following vulnerability has been resolved: fs/9p: only translate RWX permissions for plain 9P2000 Garbage in plain 9P2000's perm bits is allowed through, which causes it to be able to set (among others) the suid bit. This was presumably not the intent since the unix extended bits are handled explicitly and conditionally on .u. | ||||
CVE-2024-36951 | 2025-05-04 | 4.4 Medium | ||
In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: range check cp bad op exception interrupts Due to a CP interrupt bug, bad packet garbage exception codes are raised. Do a range check so that the debugger and runtime do not receive garbage codes. Update the user api to guard exception code type checking as well. | ||||
CVE-2024-36950 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 4.4 Medium |
In the Linux kernel, the following vulnerability has been resolved: firewire: ohci: mask bus reset interrupts between ISR and bottom half In the FireWire OHCI interrupt handler, if a bus reset interrupt has occurred, mask bus reset interrupts until bus_reset_work has serviced and cleared the interrupt. Normally, we always leave bus reset interrupts masked. We infer the bus reset from the self-ID interrupt that happens shortly thereafter. A scenario where we unmask bus reset interrupts was introduced in 2008 in a007bb857e0b26f5d8b73c2ff90782d9c0972620: If OHCI_PARAM_DEBUG_BUSRESETS (8) is set in the debug parameter bitmask, we will unmask bus reset interrupts so we can log them. irq_handler logs the bus reset interrupt. However, we can't clear the bus reset event flag in irq_handler, because we won't service the event until later. irq_handler exits with the event flag still set. If the corresponding interrupt is still unmasked, the first bus reset will usually freeze the system due to irq_handler being called again each time it exits. This freeze can be reproduced by loading firewire_ohci with "modprobe firewire_ohci debug=-1" (to enable all debugging output). Apparently there are also some cases where bus_reset_work will get called soon enough to clear the event, and operation will continue normally. This freeze was first reported a few months after a007bb85 was committed, but until now it was never fixed. The debug level could safely be set to -1 through sysfs after the module was loaded, but this would be ineffectual in logging bus reset interrupts since they were only unmasked during initialization. irq_handler will now leave the event flag set but mask bus reset interrupts, so irq_handler won't be called again and there will be no freeze. If OHCI_PARAM_DEBUG_BUSRESETS is enabled, bus_reset_work will unmask the interrupt after servicing the event, so future interrupts will be caught as desired. As a side effect to this change, OHCI_PARAM_DEBUG_BUSRESETS can now be enabled through sysfs in addition to during initial module loading. However, when enabled through sysfs, logging of bus reset interrupts will be effective only starting with the second bus reset, after bus_reset_work has executed. | ||||
CVE-2024-36949 | 2025-05-04 | 4.4 Medium | ||
In the Linux kernel, the following vulnerability has been resolved: amd/amdkfd: sync all devices to wait all processes being evicted If there are more than one device doing reset in parallel, the first device will call kfd_suspend_all_processes() to evict all processes on all devices, this call takes time to finish. other device will start reset and recover without waiting. if the process has not been evicted before doing recover, it will be restored, then caused page fault. | ||||
CVE-2024-36939 | 1 Redhat | 2 Enterprise Linux, Rhel Eus | 2025-05-04 | 5.5 Medium |
In the Linux kernel, the following vulnerability has been resolved: nfs: Handle error of rpc_proc_register() in nfs_net_init(). syzkaller reported a warning [0] triggered while destroying immature netns. rpc_proc_register() was called in init_nfs_fs(), but its error has been ignored since at least the initial commit 1da177e4c3f4 ("Linux-2.6.12-rc2"). Recently, commit d47151b79e32 ("nfs: expose /proc/net/sunrpc/nfs in net namespaces") converted the procfs to per-netns and made the problem more visible. Even when rpc_proc_register() fails, nfs_net_init() could succeed, and thus nfs_net_exit() will be called while destroying the netns. Then, remove_proc_entry() will be called for non-existing proc directory and trigger the warning below. Let's handle the error of rpc_proc_register() properly in nfs_net_init(). [0]: name 'nfs' WARNING: CPU: 1 PID: 1710 at fs/proc/generic.c:711 remove_proc_entry+0x1bb/0x2d0 fs/proc/generic.c:711 Modules linked in: CPU: 1 PID: 1710 Comm: syz-executor.2 Not tainted 6.8.0-12822-gcd51db110a7e #12 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:remove_proc_entry+0x1bb/0x2d0 fs/proc/generic.c:711 Code: 41 5d 41 5e c3 e8 85 09 b5 ff 48 c7 c7 88 58 64 86 e8 09 0e 71 02 e8 74 09 b5 ff 4c 89 e6 48 c7 c7 de 1b 80 84 e8 c5 ad 97 ff <0f> 0b eb b1 e8 5c 09 b5 ff 48 c7 c7 88 58 64 86 e8 e0 0d 71 02 eb RSP: 0018:ffffc9000c6d7ce0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff8880422b8b00 RCX: ffffffff8110503c RDX: ffff888030652f00 RSI: ffffffff81105045 RDI: 0000000000000001 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: ffffffff81bb62cb R12: ffffffff84807ffc R13: ffff88804ad6fcc0 R14: ffffffff84807ffc R15: ffffffff85741ff8 FS: 00007f30cfba8640(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff51afe8000 CR3: 000000005a60a005 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> rpc_proc_unregister+0x64/0x70 net/sunrpc/stats.c:310 nfs_net_exit+0x1c/0x30 fs/nfs/inode.c:2438 ops_exit_list+0x62/0xb0 net/core/net_namespace.c:170 setup_net+0x46c/0x660 net/core/net_namespace.c:372 copy_net_ns+0x244/0x590 net/core/net_namespace.c:505 create_new_namespaces+0x2ed/0x770 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xae/0x160 kernel/nsproxy.c:228 ksys_unshare+0x342/0x760 kernel/fork.c:3322 __do_sys_unshare kernel/fork.c:3393 [inline] __se_sys_unshare kernel/fork.c:3391 [inline] __x64_sys_unshare+0x1f/0x30 kernel/fork.c:3391 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x46/0x4e RIP: 0033:0x7f30d0febe5d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007f30cfba7cc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 00000000004bbf80 RCX: 00007f30d0febe5d RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000006c020600 RBP: 00000000004bbf80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002 R13: 000000000000000b R14: 00007f30d104c530 R15: 0000000000000000 </TASK> | ||||
CVE-2024-36909 | 2025-05-04 | 4.4 Medium | ||
In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Don't free ring buffers that couldn't be re-encrypted In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. The VMBus ring buffer code could free decrypted/shared pages if set_memory_decrypted() fails. Check the decrypted field in the struct vmbus_gpadl for the ring buffers to decide whether to free the memory. | ||||
CVE-2024-36888 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 6.2 Medium |
In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix selection of wake_cpu in kick_pool() With cpu_possible_mask=0-63 and cpu_online_mask=0-7 the following kernel oops was observed: smp: Bringing up secondary CPUs ... smp: Brought up 1 node, 8 CPUs Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0000000000000000 TEID: 0000000000000803 [..] Call Trace: arch_vcpu_is_preempted+0x12/0x80 select_idle_sibling+0x42/0x560 select_task_rq_fair+0x29a/0x3b0 try_to_wake_up+0x38e/0x6e0 kick_pool+0xa4/0x198 __queue_work.part.0+0x2bc/0x3a8 call_timer_fn+0x36/0x160 __run_timers+0x1e2/0x328 __run_timer_base+0x5a/0x88 run_timer_softirq+0x40/0x78 __do_softirq+0x118/0x388 irq_exit_rcu+0xc0/0xd8 do_ext_irq+0xae/0x168 ext_int_handler+0xbe/0xf0 psw_idle_exit+0x0/0xc default_idle_call+0x3c/0x110 do_idle+0xd4/0x158 cpu_startup_entry+0x40/0x48 rest_init+0xc6/0xc8 start_kernel+0x3c4/0x5e0 startup_continue+0x3c/0x50 The crash is caused by calling arch_vcpu_is_preempted() for an offline CPU. To avoid this, select the cpu with cpumask_any_and_distribute() to mask __pod_cpumask with cpu_online_mask. In case no cpu is left in the pool, skip the assignment. tj: This doesn't fully fix the bug as CPUs can still go down between picking the target CPU and the wake call. Fixing that likely requires adding cpu_online() test to either the sched or s390 arch code. However, regardless of how that is fixed, workqueue shouldn't be picking a CPU which isn't online as that would result in unpredictable and worse behavior. | ||||
CVE-2024-27437 | 3 Debian, Linux, Redhat | 3 Debian Linux, Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Disable auto-enable of exclusive INTx IRQ Currently for devices requiring masking at the irqchip for INTx, ie. devices without DisINTx support, the IRQ is enabled in request_irq() and subsequently disabled as necessary to align with the masked status flag. This presents a window where the interrupt could fire between these events, resulting in the IRQ incrementing the disable depth twice. This would be unrecoverable for a user since the masked flag prevents nested enables through vfio. Instead, invert the logic using IRQF_NO_AUTOEN such that exclusive INTx is never auto-enabled, then unmask as required. | ||||
CVE-2024-26907 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix fortify source warning while accessing Eth segment ------------[ cut here ]------------ memcpy: detected field-spanning write (size 56) of single field "eseg->inline_hdr.start" at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 (size 2) WARNING: CPU: 0 PID: 293779 at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] Modules linked in: 8021q garp mrp stp llc rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) ib_core(OE) mlx5_core(OE) pci_hyperv_intf mlxdevm(OE) mlx_compat(OE) tls mlxfw(OE) psample nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink mst_pciconf(OE) knem(OE) vfio_pci vfio_pci_core vfio_iommu_type1 vfio iommufd irqbypass cuse nfsv3 nfs fscache netfs xfrm_user xfrm_algo ipmi_devintf ipmi_msghandler binfmt_misc crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 snd_pcsp aesni_intel crypto_simd cryptd snd_pcm snd_timer joydev snd soundcore input_leds serio_raw evbug nfsd auth_rpcgss nfs_acl lockd grace sch_fq_codel sunrpc drm efi_pstore ip_tables x_tables autofs4 psmouse virtio_net net_failover failover floppy [last unloaded: mlx_compat(OE)] CPU: 0 PID: 293779 Comm: ssh Tainted: G OE 6.2.0-32-generic #32~22.04.1-Ubuntu Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] Code: 0c 01 00 a8 01 75 25 48 8b 75 a0 b9 02 00 00 00 48 c7 c2 10 5b fd c0 48 c7 c7 80 5b fd c0 c6 05 57 0c 03 00 01 e8 95 4d 93 da <0f> 0b 44 8b 4d b0 4c 8b 45 c8 48 8b 4d c0 e9 49 fb ff ff 41 0f b7 RSP: 0018:ffffb5b48478b570 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffb5b48478b628 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffb5b48478b5e8 R13: ffff963a3c609b5e R14: ffff9639c3fbd800 R15: ffffb5b480475a80 FS: 00007fc03b444c80(0000) GS:ffff963a3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556f46bdf000 CR3: 0000000006ac6003 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? show_regs+0x72/0x90 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] ? __warn+0x8d/0x160 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] ? report_bug+0x1bb/0x1d0 ? handle_bug+0x46/0x90 ? exc_invalid_op+0x19/0x80 ? asm_exc_invalid_op+0x1b/0x20 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] mlx5_ib_post_send_nodrain+0xb/0x20 [mlx5_ib] ipoib_send+0x2ec/0x770 [ib_ipoib] ipoib_start_xmit+0x5a0/0x770 [ib_ipoib] dev_hard_start_xmit+0x8e/0x1e0 ? validate_xmit_skb_list+0x4d/0x80 sch_direct_xmit+0x116/0x3a0 __dev_xmit_skb+0x1fd/0x580 __dev_queue_xmit+0x284/0x6b0 ? _raw_spin_unlock_irq+0xe/0x50 ? __flush_work.isra.0+0x20d/0x370 ? push_pseudo_header+0x17/0x40 [ib_ipoib] neigh_connected_output+0xcd/0x110 ip_finish_output2+0x179/0x480 ? __smp_call_single_queue+0x61/0xa0 __ip_finish_output+0xc3/0x190 ip_finish_output+0x2e/0xf0 ip_output+0x78/0x110 ? __pfx_ip_finish_output+0x10/0x10 ip_local_out+0x64/0x70 __ip_queue_xmit+0x18a/0x460 ip_queue_xmit+0x15/0x30 __tcp_transmit_skb+0x914/0x9c0 tcp_write_xmit+0x334/0x8d0 tcp_push_one+0x3c/0x60 tcp_sendmsg_locked+0x2e1/0xac0 tcp_sendmsg+0x2d/0x50 inet_sendmsg+0x43/0x90 sock_sendmsg+0x68/0x80 sock_write_iter+0x93/0x100 vfs_write+0x326/0x3c0 ksys_write+0xbd/0xf0 ? do_syscall_64+0x69/0x90 __x64_sys_write+0x19/0x30 do_syscall_ ---truncated--- | ||||
CVE-2024-26880 | 1 Redhat | 2 Enterprise Linux, Rhel Eus | 2025-05-04 | 6.3 Medium |
In the Linux kernel, the following vulnerability has been resolved: dm: call the resume method on internal suspend There is this reported crash when experimenting with the lvm2 testsuite. The list corruption is caused by the fact that the postsuspend and resume methods were not paired correctly; there were two consecutive calls to the origin_postsuspend function. The second call attempts to remove the "hash_list" entry from a list, while it was already removed by the first call. Fix __dm_internal_resume so that it calls the preresume and resume methods of the table's targets. If a preresume method of some target fails, we are in a tricky situation. We can't return an error because dm_internal_resume isn't supposed to return errors. We can't return success, because then the "resume" and "postsuspend" methods would not be paired correctly. So, we set the DMF_SUSPENDED flag and we fake normal suspend - it may confuse userspace tools, but it won't cause a kernel crash. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:56! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 1 PID: 8343 Comm: dmsetup Not tainted 6.8.0-rc6 #4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 RIP: 0010:__list_del_entry_valid_or_report+0x77/0xc0 <snip> RSP: 0018:ffff8881b831bcc0 EFLAGS: 00010282 RAX: 000000000000004e RBX: ffff888143b6eb80 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffffff819053d0 RDI: 00000000ffffffff RBP: ffff8881b83a3400 R08: 00000000fffeffff R09: 0000000000000058 R10: 0000000000000000 R11: ffffffff81a24080 R12: 0000000000000001 R13: ffff88814538e000 R14: ffff888143bc6dc0 R15: ffffffffa02e4bb0 FS: 00000000f7c0f780(0000) GS:ffff8893f0a40000(0000) knlGS:0000000000000000 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 0000000057fb5000 CR3: 0000000143474000 CR4: 00000000000006b0 Call Trace: <TASK> ? die+0x2d/0x80 ? do_trap+0xeb/0xf0 ? __list_del_entry_valid_or_report+0x77/0xc0 ? do_error_trap+0x60/0x80 ? __list_del_entry_valid_or_report+0x77/0xc0 ? exc_invalid_op+0x49/0x60 ? __list_del_entry_valid_or_report+0x77/0xc0 ? asm_exc_invalid_op+0x16/0x20 ? table_deps+0x1b0/0x1b0 [dm_mod] ? __list_del_entry_valid_or_report+0x77/0xc0 origin_postsuspend+0x1a/0x50 [dm_snapshot] dm_table_postsuspend_targets+0x34/0x50 [dm_mod] dm_suspend+0xd8/0xf0 [dm_mod] dev_suspend+0x1f2/0x2f0 [dm_mod] ? table_deps+0x1b0/0x1b0 [dm_mod] ctl_ioctl+0x300/0x5f0 [dm_mod] dm_compat_ctl_ioctl+0x7/0x10 [dm_mod] __x64_compat_sys_ioctl+0x104/0x170 do_syscall_64+0x184/0x1b0 entry_SYSCALL_64_after_hwframe+0x46/0x4e RIP: 0033:0xf7e6aead <snip> ---[ end trace 0000000000000000 ]--- | ||||
CVE-2024-26845 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-05-04 | 5.5 Medium |
In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Add TMF to tmr_list handling An abort that is responded to by iSCSI itself is added to tmr_list but does not go to target core. A LUN_RESET that goes through tmr_list takes a refcounter on the abort and waits for completion. However, the abort will be never complete because it was not started in target core. Unable to locate ITT: 0x05000000 on CID: 0 Unable to locate RefTaskTag: 0x05000000 on CID: 0. wait_for_tasks: Stopping tmf LUN_RESET with tag 0x0 ref_task_tag 0x0 i_state 34 t_state ISTATE_PROCESSING refcnt 2 transport_state active,stop,fabric_stop wait for tasks: tmf LUN_RESET with tag 0x0 ref_task_tag 0x0 i_state 34 t_state ISTATE_PROCESSING refcnt 2 transport_state active,stop,fabric_stop ... INFO: task kworker/0:2:49 blocked for more than 491 seconds. task:kworker/0:2 state:D stack: 0 pid: 49 ppid: 2 flags:0x00000800 Workqueue: events target_tmr_work [target_core_mod] Call Trace: __switch_to+0x2c4/0x470 _schedule+0x314/0x1730 schedule+0x64/0x130 schedule_timeout+0x168/0x430 wait_for_completion+0x140/0x270 target_put_cmd_and_wait+0x64/0xb0 [target_core_mod] core_tmr_lun_reset+0x30/0xa0 [target_core_mod] target_tmr_work+0xc8/0x1b0 [target_core_mod] process_one_work+0x2d4/0x5d0 worker_thread+0x78/0x6c0 To fix this, only add abort to tmr_list if it will be handled by target core. | ||||
CVE-2024-26820 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-05-04 | 5.5 Medium |
In the Linux kernel, the following vulnerability has been resolved: hv_netvsc: Register VF in netvsc_probe if NET_DEVICE_REGISTER missed If hv_netvsc driver is unloaded and reloaded, the NET_DEVICE_REGISTER handler cannot perform VF register successfully as the register call is received before netvsc_probe is finished. This is because we register register_netdevice_notifier() very early( even before vmbus_driver_register()). To fix this, we try to register each such matching VF( if it is visible as a netdevice) at the end of netvsc_probe. | ||||
CVE-2024-26763 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-05-04 | 7.1 High |
In the Linux kernel, the following vulnerability has been resolved: dm-crypt: don't modify the data when using authenticated encryption It was said that authenticated encryption could produce invalid tag when the data that is being encrypted is modified [1]. So, fix this problem by copying the data into the clone bio first and then encrypt them inside the clone bio. This may reduce performance, but it is needed to prevent the user from corrupting the device by writing data with O_DIRECT and modifying them at the same time. [1] https://lore.kernel.org/all/20240207004723.GA35324@sol.localdomain/T/ | ||||
CVE-2024-26746 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Ensure safe user copy of completion record If CONFIG_HARDENED_USERCOPY is enabled, copying completion record from event log cache to user triggers a kernel bug. [ 1987.159822] usercopy: Kernel memory exposure attempt detected from SLUB object 'dsa0' (offset 74, size 31)! [ 1987.170845] ------------[ cut here ]------------ [ 1987.176086] kernel BUG at mm/usercopy.c:102! [ 1987.180946] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 1987.186866] CPU: 17 PID: 528 Comm: kworker/17:1 Not tainted 6.8.0-rc2+ #5 [ 1987.194537] Hardware name: Intel Corporation AvenueCity/AvenueCity, BIOS BHSDCRB1.86B.2492.D03.2307181620 07/18/2023 [ 1987.206405] Workqueue: wq0.0 idxd_evl_fault_work [idxd] [ 1987.212338] RIP: 0010:usercopy_abort+0x72/0x90 [ 1987.217381] Code: 58 65 9c 50 48 c7 c2 17 85 61 9c 57 48 c7 c7 98 fd 6b 9c 48 0f 44 d6 48 c7 c6 b3 08 62 9c 4c 89 d1 49 0f 44 f3 e8 1e 2e d5 ff <0f> 0b 49 c7 c1 9e 42 61 9c 4c 89 cf 4d 89 c8 eb a9 66 66 2e 0f 1f [ 1987.238505] RSP: 0018:ff62f5cf20607d60 EFLAGS: 00010246 [ 1987.244423] RAX: 000000000000005f RBX: 000000000000001f RCX: 0000000000000000 [ 1987.252480] RDX: 0000000000000000 RSI: ffffffff9c61429e RDI: 00000000ffffffff [ 1987.260538] RBP: ff62f5cf20607d78 R08: ff2a6a89ef3fffe8 R09: 00000000fffeffff [ 1987.268595] R10: ff2a6a89eed00000 R11: 0000000000000003 R12: ff2a66934849c89a [ 1987.276652] R13: 0000000000000001 R14: ff2a66934849c8b9 R15: ff2a66934849c899 [ 1987.284710] FS: 0000000000000000(0000) GS:ff2a66b22fe40000(0000) knlGS:0000000000000000 [ 1987.293850] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1987.300355] CR2: 00007fe291a37000 CR3: 000000010fbd4005 CR4: 0000000000f71ef0 [ 1987.308413] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1987.316470] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 1987.324527] PKRU: 55555554 [ 1987.327622] Call Trace: [ 1987.330424] <TASK> [ 1987.332826] ? show_regs+0x6e/0x80 [ 1987.336703] ? die+0x3c/0xa0 [ 1987.339988] ? do_trap+0xd4/0xf0 [ 1987.343662] ? do_error_trap+0x75/0xa0 [ 1987.347922] ? usercopy_abort+0x72/0x90 [ 1987.352277] ? exc_invalid_op+0x57/0x80 [ 1987.356634] ? usercopy_abort+0x72/0x90 [ 1987.360988] ? asm_exc_invalid_op+0x1f/0x30 [ 1987.365734] ? usercopy_abort+0x72/0x90 [ 1987.370088] __check_heap_object+0xb7/0xd0 [ 1987.374739] __check_object_size+0x175/0x2d0 [ 1987.379588] idxd_copy_cr+0xa9/0x130 [idxd] [ 1987.384341] idxd_evl_fault_work+0x127/0x390 [idxd] [ 1987.389878] process_one_work+0x13e/0x300 [ 1987.394435] ? __pfx_worker_thread+0x10/0x10 [ 1987.399284] worker_thread+0x2f7/0x420 [ 1987.403544] ? _raw_spin_unlock_irqrestore+0x2b/0x50 [ 1987.409171] ? __pfx_worker_thread+0x10/0x10 [ 1987.414019] kthread+0x107/0x140 [ 1987.417693] ? __pfx_kthread+0x10/0x10 [ 1987.421954] ret_from_fork+0x3d/0x60 [ 1987.426019] ? __pfx_kthread+0x10/0x10 [ 1987.430281] ret_from_fork_asm+0x1b/0x30 [ 1987.434744] </TASK> The issue arises because event log cache is created using kmem_cache_create() which is not suitable for user copy. Fix the issue by creating event log cache with kmem_cache_create_usercopy(), ensuring safe user copy. | ||||
CVE-2024-26726 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
In the Linux kernel, the following vulnerability has been resolved: btrfs: don't drop extent_map for free space inode on write error While running the CI for an unrelated change I hit the following panic with generic/648 on btrfs_holes_spacecache. assertion failed: block_start != EXTENT_MAP_HOLE, in fs/btrfs/extent_io.c:1385 ------------[ cut here ]------------ kernel BUG at fs/btrfs/extent_io.c:1385! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 2695096 Comm: fsstress Kdump: loaded Tainted: G W 6.8.0-rc2+ #1 RIP: 0010:__extent_writepage_io.constprop.0+0x4c1/0x5c0 Call Trace: <TASK> extent_write_cache_pages+0x2ac/0x8f0 extent_writepages+0x87/0x110 do_writepages+0xd5/0x1f0 filemap_fdatawrite_wbc+0x63/0x90 __filemap_fdatawrite_range+0x5c/0x80 btrfs_fdatawrite_range+0x1f/0x50 btrfs_write_out_cache+0x507/0x560 btrfs_write_dirty_block_groups+0x32a/0x420 commit_cowonly_roots+0x21b/0x290 btrfs_commit_transaction+0x813/0x1360 btrfs_sync_file+0x51a/0x640 __x64_sys_fdatasync+0x52/0x90 do_syscall_64+0x9c/0x190 entry_SYSCALL_64_after_hwframe+0x6e/0x76 This happens because we fail to write out the free space cache in one instance, come back around and attempt to write it again. However on the second pass through we go to call btrfs_get_extent() on the inode to get the extent mapping. Because this is a new block group, and with the free space inode we always search the commit root to avoid deadlocking with the tree, we find nothing and return a EXTENT_MAP_HOLE for the requested range. This happens because the first time we try to write the space cache out we hit an error, and on an error we drop the extent mapping. This is normal for normal files, but the free space cache inode is special. We always expect the extent map to be correct. Thus the second time through we end up with a bogus extent map. Since we're deprecating this feature, the most straightforward way to fix this is to simply skip dropping the extent map range for this failed range. I shortened the test by using error injection to stress the area to make it easier to reproduce. With this patch in place we no longer panic with my error injection test. | ||||
CVE-2024-26706 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
In the Linux kernel, the following vulnerability has been resolved: parisc: Fix random data corruption from exception handler The current exception handler implementation, which assists when accessing user space memory, may exhibit random data corruption if the compiler decides to use a different register than the specified register %r29 (defined in ASM_EXCEPTIONTABLE_REG) for the error code. If the compiler choose another register, the fault handler will nevertheless store -EFAULT into %r29 and thus trash whatever this register is used for. Looking at the assembly I found that this happens sometimes in emulate_ldd(). To solve the issue, the easiest solution would be if it somehow is possible to tell the fault handler which register is used to hold the error code. Using %0 or %1 in the inline assembly is not posssible as it will show up as e.g. %r29 (with the "%r" prefix), which the GNU assembler can not convert to an integer. This patch takes another, better and more flexible approach: We extend the __ex_table (which is out of the execution path) by one 32-word. In this word we tell the compiler to insert the assembler instruction "or %r0,%r0,%reg", where %reg references the register which the compiler choosed for the error return code. In case of an access failure, the fault handler finds the __ex_table entry and can examine the opcode. The used register is encoded in the lowest 5 bits, and the fault handler can then store -EFAULT into this register. Since we extend the __ex_table to 3 words we can't use the BUILDTIME_TABLE_SORT config option any longer. | ||||
CVE-2024-26705 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
In the Linux kernel, the following vulnerability has been resolved: parisc: BTLB: Fix crash when setting up BTLB at CPU bringup When using hotplug and bringing up a 32-bit CPU, ask the firmware about the BTLB information to set up the static (block) TLB entries. For that write access to the static btlb_info struct is needed, but since it is marked __ro_after_init the kernel segfaults with missing write permissions. Fix the crash by dropping the __ro_after_init annotation. | ||||
CVE-2024-26697 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-05-04 | 5.5 Medium |
In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix data corruption in dsync block recovery for small block sizes The helper function nilfs_recovery_copy_block() of nilfs_recovery_dsync_blocks(), which recovers data from logs created by data sync writes during a mount after an unclean shutdown, incorrectly calculates the on-page offset when copying repair data to the file's page cache. In environments where the block size is smaller than the page size, this flaw can cause data corruption and leak uninitialized memory bytes during the recovery process. Fix these issues by correcting this byte offset calculation on the page. | ||||
CVE-2024-26693 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix a crash when we run out of stations A DoS tool that injects loads of authentication frames made our AP crash. The iwl_mvm_is_dup() function couldn't find the per-queue dup_data which was not allocated. The root cause for that is that we ran out of stations in the firmware and we didn't really add the station to the firmware, yet we didn't return an error to mac80211. Mac80211 was thinking that we have the station and because of that, sta_info::uploaded was set to 1. This allowed ieee80211_find_sta_by_ifaddr() to return a valid station object, but that ieee80211_sta didn't have any iwl_mvm_sta object initialized and that caused the crash mentioned earlier when we got Rx on that station. |