Filtered by vendor Redhat
Subscriptions
Filtered by product Enterprise Linux
Subscriptions
Total
15504 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-38564 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2025-10-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Add BPF_PROG_TYPE_CGROUP_SKB attach type enforcement in BPF_LINK_CREATE bpf_prog_attach uses attach_type_to_prog_type to enforce proper attach type for BPF_PROG_TYPE_CGROUP_SKB. link_create uses bpf_prog_get and relies on bpf_prog_attach_check_attach_type to properly verify prog_type <> attach_type association. Add missing attach_type enforcement for the link_create case. Otherwise, it's currently possible to attach cgroup_skb prog types to other cgroup hooks. | ||||
| CVE-2022-30631 | 2 Golang, Redhat | 21 Go, Acm, Advanced Cluster Security and 18 more | 2025-10-20 | 7.5 High |
| Uncontrolled recursion in Reader.Read in compress/gzip before Go 1.17.12 and Go 1.18.4 allows an attacker to cause a panic due to stack exhaustion via an archive containing a large number of concatenated 0-length compressed files. | ||||
| CVE-2023-6277 | 3 Fedoraproject, Libtiff, Redhat | 3 Fedora, Libtiff, Enterprise Linux | 2025-10-17 | 6.5 Medium |
| An out-of-memory flaw was found in libtiff. Passing a crafted tiff file to TIFFOpen() API may allow a remote attacker to cause a denial of service via a craft input with size smaller than 379 KB. | ||||
| CVE-2024-57898 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-17 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: clear link ID from bitmap during link delete after clean up Currently, during link deletion, the link ID is first removed from the valid_links bitmap before performing any clean-up operations. However, some functions require the link ID to remain in the valid_links bitmap. One such example is cfg80211_cac_event(). The flow is - nl80211_remove_link() cfg80211_remove_link() ieee80211_del_intf_link() ieee80211_vif_set_links() ieee80211_vif_update_links() ieee80211_link_stop() cfg80211_cac_event() cfg80211_cac_event() requires link ID to be present but it is cleared already in cfg80211_remove_link(). Ultimately, WARN_ON() is hit. Therefore, clear the link ID from the bitmap only after completing the link clean-up. | ||||
| CVE-2024-57879 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: iso: Always release hdev at the end of iso_listen_bis Since hci_get_route holds the device before returning, the hdev should be released with hci_dev_put at the end of iso_listen_bis even if the function returns with an error. | ||||
| CVE-2024-57809 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: imx6: Fix suspend/resume support on i.MX6QDL The suspend/resume functionality is currently broken on the i.MX6QDL platform, as documented in the NXP errata (ERR005723): https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf This patch addresses the issue by sharing most of the suspend/resume sequences used by other i.MX devices, while avoiding modifications to critical registers that disrupt the PCIe functionality. It targets the same problem as the following downstream commit: https://github.com/nxp-imx/linux-imx/commit/4e92355e1f79d225ea842511fcfd42b343b32995 Unlike the downstream commit, this patch also resets the connected PCIe device if possible. Without this reset, certain drivers, such as ath10k or iwlwifi, will crash on resume. The device reset is also done by the driver on other i.MX platforms, making this patch consistent with existing practices. Upon resuming, the kernel will hang and display an error. Here's an example of the error encountered with the ath10k driver: ath10k_pci 0000:01:00.0: Unable to change power state from D3hot to D0, device inaccessible Unhandled fault: imprecise external abort (0x1406) at 0x0106f944 Without this patch, suspend/resume will fail on i.MX6QDL devices if a PCIe device is connected. [kwilczynski: commit log, added tag for stable releases] | ||||
| CVE-2024-56406 | 2 Perl, Redhat | 2 Perl, Enterprise Linux | 2025-10-16 | 8.4 High |
| A heap buffer overflow vulnerability was discovered in Perl. Release branches 5.34, 5.36, 5.38 and 5.40 are affected, including development versions from 5.33.1 through 5.41.10. When there are non-ASCII bytes in the left-hand-side of the `tr` operator, `S_do_trans_invmap` can overflow the destination pointer `d`. $ perl -e '$_ = "\x{FF}" x 1000000; tr/\xFF/\x{100}/;' Segmentation fault (core dumped) It is believed that this vulnerability can enable Denial of Service and possibly Code Execution attacks on platforms that lack sufficient defenses. | ||||
| CVE-2024-49569 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-15 | 5.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvme-rdma: unquiesce admin_q before destroy it Kernel will hang on destroy admin_q while we create ctrl failed, such as following calltrace: PID: 23644 TASK: ff2d52b40f439fc0 CPU: 2 COMMAND: "nvme" #0 [ff61d23de260fb78] __schedule at ffffffff8323bc15 #1 [ff61d23de260fc08] schedule at ffffffff8323c014 #2 [ff61d23de260fc28] blk_mq_freeze_queue_wait at ffffffff82a3dba1 #3 [ff61d23de260fc78] blk_freeze_queue at ffffffff82a4113a #4 [ff61d23de260fc90] blk_cleanup_queue at ffffffff82a33006 #5 [ff61d23de260fcb0] nvme_rdma_destroy_admin_queue at ffffffffc12686ce #6 [ff61d23de260fcc8] nvme_rdma_setup_ctrl at ffffffffc1268ced #7 [ff61d23de260fd28] nvme_rdma_create_ctrl at ffffffffc126919b #8 [ff61d23de260fd68] nvmf_dev_write at ffffffffc024f362 #9 [ff61d23de260fe38] vfs_write at ffffffff827d5f25 RIP: 00007fda7891d574 RSP: 00007ffe2ef06958 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 000055e8122a4d90 RCX: 00007fda7891d574 RDX: 000000000000012b RSI: 000055e8122a4d90 RDI: 0000000000000004 RBP: 00007ffe2ef079c0 R8: 000000000000012b R9: 000055e8122a4d90 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000004 R13: 000055e8122923c0 R14: 000000000000012b R15: 00007fda78a54500 ORIG_RAX: 0000000000000001 CS: 0033 SS: 002b This due to we have quiesced admi_q before cancel requests, but forgot to unquiesce before destroy it, as a result we fail to drain the pending requests, and hang on blk_mq_freeze_queue_wait() forever. Here try to reuse nvme_rdma_teardown_admin_queue() to fix this issue and simplify the code. | ||||
| CVE-2024-53681 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: Don't overflow subsysnqn nvmet_root_discovery_nqn_store treats the subsysnqn string like a fixed size buffer, even though it is dynamically allocated to the size of the string. Create a new string with kstrndup instead of using the old buffer. | ||||
| CVE-2022-49147 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: Fix the maximum minor value is blk_alloc_ext_minor() ida_alloc_range(..., min, max, ...) returns values from min to max, inclusive. So, NR_EXT_DEVT is a valid idx returned by blk_alloc_ext_minor(). This is an issue because in device_add_disk(), this value is used in: ddev->devt = MKDEV(disk->major, disk->first_minor); and NR_EXT_DEVT is '(1 << MINORBITS)'. So, should 'disk->first_minor' be NR_EXT_DEVT, it would overflow. | ||||
| CVE-2022-49142 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: preserve skb_end_offset() in skb_unclone_keeptruesize() syzbot found another way to trigger the infamous WARN_ON_ONCE(delta < len) in skb_try_coalesce() [1] I was able to root cause the issue to kfence. When kfence is in action, the following assertion is no longer true: int size = xxxx; void *ptr1 = kmalloc(size, gfp); void *ptr2 = kmalloc(size, gfp); if (ptr1 && ptr2) ASSERT(ksize(ptr1) == ksize(ptr2)); We attempted to fix these issues in the blamed commits, but forgot that TCP was possibly shifting data after skb_unclone_keeptruesize() has been used, notably from tcp_retrans_try_collapse(). So we not only need to keep same skb->truesize value, we also need to make sure TCP wont fill new tailroom that pskb_expand_head() was able to get from a addr = kmalloc(...) followed by ksize(addr) Split skb_unclone_keeptruesize() into two parts: 1) Inline skb_unclone_keeptruesize() for the common case, when skb is not cloned. 2) Out of line __skb_unclone_keeptruesize() for the 'slow path'. WARNING: CPU: 1 PID: 6490 at net/core/skbuff.c:5295 skb_try_coalesce+0x1235/0x1560 net/core/skbuff.c:5295 Modules linked in: CPU: 1 PID: 6490 Comm: syz-executor161 Not tainted 5.17.0-rc4-syzkaller-00229-g4f12b742eb2b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:skb_try_coalesce+0x1235/0x1560 net/core/skbuff.c:5295 Code: bf 01 00 00 00 0f b7 c0 89 c6 89 44 24 20 e8 62 24 4e fa 8b 44 24 20 83 e8 01 0f 85 e5 f0 ff ff e9 87 f4 ff ff e8 cb 20 4e fa <0f> 0b e9 06 f9 ff ff e8 af b2 95 fa e9 69 f0 ff ff e8 95 b2 95 fa RSP: 0018:ffffc900063af268 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 00000000ffffffd5 RCX: 0000000000000000 RDX: ffff88806fc05700 RSI: ffffffff872abd55 RDI: 0000000000000003 RBP: ffff88806e675500 R08: 00000000ffffffd5 R09: 0000000000000000 R10: ffffffff872ab659 R11: 0000000000000000 R12: ffff88806dd554e8 R13: ffff88806dd9bac0 R14: ffff88806dd9a2c0 R15: 0000000000000155 FS: 00007f18014f9700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020002000 CR3: 000000006be7a000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_try_coalesce net/ipv4/tcp_input.c:4651 [inline] tcp_try_coalesce+0x393/0x920 net/ipv4/tcp_input.c:4630 tcp_queue_rcv+0x8a/0x6e0 net/ipv4/tcp_input.c:4914 tcp_data_queue+0x11fd/0x4bb0 net/ipv4/tcp_input.c:5025 tcp_rcv_established+0x81e/0x1ff0 net/ipv4/tcp_input.c:5947 tcp_v4_do_rcv+0x65e/0x980 net/ipv4/tcp_ipv4.c:1719 sk_backlog_rcv include/net/sock.h:1037 [inline] __release_sock+0x134/0x3b0 net/core/sock.c:2779 release_sock+0x54/0x1b0 net/core/sock.c:3311 sk_wait_data+0x177/0x450 net/core/sock.c:2821 tcp_recvmsg_locked+0xe28/0x1fd0 net/ipv4/tcp.c:2457 tcp_recvmsg+0x137/0x610 net/ipv4/tcp.c:2572 inet_recvmsg+0x11b/0x5e0 net/ipv4/af_inet.c:850 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] sock_recvmsg net/socket.c:962 [inline] ____sys_recvmsg+0x2c4/0x600 net/socket.c:2632 ___sys_recvmsg+0x127/0x200 net/socket.c:2674 __sys_recvmsg+0xe2/0x1a0 net/socket.c:2704 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae | ||||
| CVE-2022-49124 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/mce: Work around an erratum on fast string copy instructions A rare kernel panic scenario can happen when the following conditions are met due to an erratum on fast string copy instructions: 1) An uncorrected error. 2) That error must be in first cache line of a page. 3) Kernel must execute page_copy from the page immediately before that page. The fast string copy instructions ("REP; MOVS*") could consume an uncorrectable memory error in the cache line _right after_ the desired region to copy and raise an MCE. Bit 0 of MSR_IA32_MISC_ENABLE can be cleared to disable fast string copy and will avoid such spurious machine checks. However, that is less preferable due to the permanent performance impact. Considering memory poison is rare, it's desirable to keep fast string copy enabled until an MCE is seen. Intel has confirmed the following: 1. The CPU erratum of fast string copy only applies to Skylake, Cascade Lake and Cooper Lake generations. Directly return from the MCE handler: 2. Will result in complete execution of the "REP; MOVS*" with no data loss or corruption. 3. Will not result in another MCE firing on the next poisoned cache line due to "REP; MOVS*". 4. Will resume execution from a correct point in code. 5. Will result in the same instruction that triggered the MCE firing a second MCE immediately for any other software recoverable data fetch errors. 6. Is not safe without disabling the fast string copy, as the next fast string copy of the same buffer on the same CPU would result in a PANIC MCE. This should mitigate the erratum completely with the only caveat that the fast string copy is disabled on the affected hyper thread thus performance degradation. This is still better than the OS crashing on MCEs raised on an irrelevant process due to "REP; MOVS*' accesses in a kernel context, e.g., copy_page. Injected errors on 1st cache line of 8 anonymous pages of process 'proc1' and observed MCE consumption from 'proc2' with no panic (directly returned). Without the fix, the host panicked within a few minutes on a random 'proc2' process due to kernel access from copy_page. [ bp: Fix comment style + touch ups, zap an unlikely(), improve the quirk function's readability. ] | ||||
| CVE-2022-49156 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix scheduling while atomic The driver makes a call into midlayer (fc_remote_port_delete) which can put the thread to sleep. The thread that originates the call is in interrupt context. The combination of the two trigger a crash. Schedule the call in non-interrupt context where it is more safe. kernel: BUG: scheduling while atomic: swapper/7/0/0x00010000 kernel: Call Trace: kernel: <IRQ> kernel: dump_stack+0x66/0x81 kernel: __schedule_bug.cold.90+0x5/0x1d kernel: __schedule+0x7af/0x960 kernel: schedule+0x28/0x80 kernel: schedule_timeout+0x26d/0x3b0 kernel: wait_for_completion+0xb4/0x140 kernel: ? wake_up_q+0x70/0x70 kernel: __wait_rcu_gp+0x12c/0x160 kernel: ? sdev_evt_alloc+0xc0/0x180 [scsi_mod] kernel: synchronize_sched+0x6c/0x80 kernel: ? call_rcu_bh+0x20/0x20 kernel: ? __bpf_trace_rcu_invoke_callback+0x10/0x10 kernel: sdev_evt_alloc+0xfd/0x180 [scsi_mod] kernel: starget_for_each_device+0x85/0xb0 [scsi_mod] kernel: ? scsi_init_io+0x360/0x3d0 [scsi_mod] kernel: scsi_init_io+0x388/0x3d0 [scsi_mod] kernel: device_for_each_child+0x54/0x90 kernel: fc_remote_port_delete+0x70/0xe0 [scsi_transport_fc] kernel: qla2x00_schedule_rport_del+0x62/0xf0 [qla2xxx] kernel: qla2x00_mark_device_lost+0x9c/0xd0 [qla2xxx] kernel: qla24xx_handle_plogi_done_event+0x55f/0x570 [qla2xxx] kernel: qla2x00_async_login_sp_done+0xd2/0x100 [qla2xxx] kernel: qla24xx_logio_entry+0x13a/0x3c0 [qla2xxx] kernel: qla24xx_process_response_queue+0x306/0x400 [qla2xxx] kernel: qla24xx_msix_rsp_q+0x3f/0xb0 [qla2xxx] kernel: __handle_irq_event_percpu+0x40/0x180 kernel: handle_irq_event_percpu+0x30/0x80 kernel: handle_irq_event+0x36/0x60 | ||||
| CVE-2025-11731 | 1 Redhat | 2 Enterprise Linux, Openshift | 2025-10-15 | 3.1 Low |
| A flaw was found in the exsltFuncResultComp() function of libxslt, which handles EXSLT <func:result> elements during stylesheet parsing. Due to improper type handling, the function may treat an XML document node as a regular XML element node, resulting in a type confusion. This can cause unexpected memory reads and potential crashes. While difficult to exploit, the flaw could lead to application instability or denial of service. | ||||
| CVE-2024-50602 | 4 Debian, Libexpat Project, Netapp and 1 more | 19 Debian Linux, Libexpat, Active Iq Unified Manager and 16 more | 2025-10-15 | 5.9 Medium |
| An issue was discovered in libexpat before 2.6.4. There is a crash within the XML_ResumeParser function because XML_StopParser can stop/suspend an unstarted parser. | ||||
| CVE-2025-21663 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: dwmac-tegra: Read iommu stream id from device tree Nvidia's Tegra MGBE controllers require the IOMMU "Stream ID" (SID) to be written to the MGBE_WRAP_AXI_ASID0_CTRL register. The current driver is hard coded to use MGBE0's SID for all controllers. This causes softirq time outs and kernel panics when using controllers other than MGBE0. Example dmesg errors when an ethernet cable is connected to MGBE1: [ 116.133290] tegra-mgbe 6910000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx [ 121.851283] tegra-mgbe 6910000.ethernet eth1: NETDEV WATCHDOG: CPU: 5: transmit queue 0 timed out 5690 ms [ 121.851782] tegra-mgbe 6910000.ethernet eth1: Reset adapter. [ 121.892464] tegra-mgbe 6910000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 121.905920] tegra-mgbe 6910000.ethernet eth1: PHY [stmmac-1:00] driver [Aquantia AQR113] (irq=171) [ 121.907356] tegra-mgbe 6910000.ethernet eth1: Enabling Safety Features [ 121.907578] tegra-mgbe 6910000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported [ 121.908399] tegra-mgbe 6910000.ethernet eth1: registered PTP clock [ 121.908582] tegra-mgbe 6910000.ethernet eth1: configuring for phy/10gbase-r link mode [ 125.961292] tegra-mgbe 6910000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx [ 181.921198] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 181.921404] rcu: 7-....: (1 GPs behind) idle=540c/1/0x4000000000000002 softirq=1748/1749 fqs=2337 [ 181.921684] rcu: (detected by 4, t=6002 jiffies, g=1357, q=1254 ncpus=8) [ 181.921878] Sending NMI from CPU 4 to CPUs 7: [ 181.921886] NMI backtrace for cpu 7 [ 181.922131] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Kdump: loaded Not tainted 6.13.0-rc3+ #6 [ 181.922390] Hardware name: NVIDIA CTI Forge + Orin AGX/Jetson, BIOS 202402.1-Unknown 10/28/2024 [ 181.922658] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 181.922847] pc : handle_softirqs+0x98/0x368 [ 181.922978] lr : __do_softirq+0x18/0x20 [ 181.923095] sp : ffff80008003bf50 [ 181.923189] x29: ffff80008003bf50 x28: 0000000000000008 x27: 0000000000000000 [ 181.923379] x26: ffffce78ea277000 x25: 0000000000000000 x24: 0000001c61befda0 [ 181.924486] x23: 0000000060400009 x22: ffffce78e99918bc x21: ffff80008018bd70 [ 181.925568] x20: ffffce78e8bb00d8 x19: ffff80008018bc20 x18: 0000000000000000 [ 181.926655] x17: ffff318ebe7d3000 x16: ffff800080038000 x15: 0000000000000000 [ 181.931455] x14: ffff000080816680 x13: ffff318ebe7d3000 x12: 000000003464d91d [ 181.938628] x11: 0000000000000040 x10: ffff000080165a70 x9 : ffffce78e8bb0160 [ 181.945804] x8 : ffff8000827b3160 x7 : f9157b241586f343 x6 : eeb6502a01c81c74 [ 181.953068] x5 : a4acfcdd2e8096bb x4 : ffffce78ea277340 x3 : 00000000ffffd1e1 [ 181.960329] x2 : 0000000000000101 x1 : ffffce78ea277340 x0 : ffff318ebe7d3000 [ 181.967591] Call trace: [ 181.970043] handle_softirqs+0x98/0x368 (P) [ 181.974240] __do_softirq+0x18/0x20 [ 181.977743] ____do_softirq+0x14/0x28 [ 181.981415] call_on_irq_stack+0x24/0x30 [ 181.985180] do_softirq_own_stack+0x20/0x30 [ 181.989379] __irq_exit_rcu+0x114/0x140 [ 181.993142] irq_exit_rcu+0x14/0x28 [ 181.996816] el1_interrupt+0x44/0xb8 [ 182.000316] el1h_64_irq_handler+0x14/0x20 [ 182.004343] el1h_64_irq+0x80/0x88 [ 182.007755] cpuidle_enter_state+0xc4/0x4a8 (P) [ 182.012305] cpuidle_enter+0x3c/0x58 [ 182.015980] cpuidle_idle_call+0x128/0x1c0 [ 182.020005] do_idle+0xe0/0xf0 [ 182.023155] cpu_startup_entry+0x3c/0x48 [ 182.026917] secondary_start_kernel+0xdc/0x120 [ 182.031379] __secondary_switched+0x74/0x78 [ 212.971162] rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 7-.... } 6103 jiffies s: 417 root: 0x80/. [ 212.985935] rcu: blocking rcu_node structures (internal RCU debug): [ 212.992758] Sending NMI from CPU 0 to CPUs 7: [ 212.998539] NMI backtrace for cpu 7 [ 213.004304] CPU: 7 UID: 0 PI ---truncated--- | ||||
| CVE-2024-57947 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_set_pipapo: fix initial map fill The initial buffer has to be inited to all-ones, but it must restrict it to the size of the first field, not the total field size. After each round in the map search step, the result and the fill map are swapped, so if we have a set where f->bsize of the first element is smaller than m->bsize_max, those one-bits are leaked into future rounds result map. This makes pipapo find an incorrect matching results for sets where first field size is not the largest. Followup patch adds a test case to nft_concat_range.sh selftest script. Thanks to Stefano Brivio for pointing out that we need to zero out the remainder explicitly, only correcting memset() argument isn't enough. | ||||
| CVE-2025-5372 | 2 Libssh, Redhat | 4 Libssh, Enterprise Linux, Openshift and 1 more | 2025-10-15 | 5 Medium |
| A flaw was found in libssh versions built with OpenSSL versions older than 3.0, specifically in the ssh_kdf() function responsible for key derivation. Due to inconsistent interpretation of return values where OpenSSL uses 0 to indicate failure and libssh uses 0 for success—the function may mistakenly return a success status even when key derivation fails. This results in uninitialized cryptographic key buffers being used in subsequent communication, potentially compromising SSH sessions' confidentiality, integrity, and availability. | ||||
| CVE-2024-30105 | 2 Microsoft, Redhat | 3 .net, Visual Studio 2022, Enterprise Linux | 2025-10-14 | 7.5 High |
| .NET and Visual Studio Denial of Service Vulnerability | ||||
| CVE-2024-38095 | 2 Microsoft, Redhat | 3 .net, Visual Studio 2022, Enterprise Linux | 2025-10-14 | 7.5 High |
| .NET and Visual Studio Denial of Service Vulnerability | ||||