Filtered by vendor Linux
Subscriptions
Filtered by product Linux Kernel
Subscriptions
Total
26137 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50888 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio() q6v5_wcss_init_mmio() will call platform_get_resource_byname() that may fail and return NULL. devm_ioremap() will use res->start as input, which may causes null-ptr-deref. Check the ret value of platform_get_resource_byname() to avoid the null-ptr-deref. | ||||
| CVE-2022-50889 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm integrity: Fix UAF in dm_integrity_dtr() Dm_integrity also has the same UAF problem when dm_resume() and dm_destroy() are concurrent. Therefore, cancelling timer again in dm_integrity_dtr(). | ||||
| CVE-2022-50839 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: jbd2: fix potential buffer head reference count leak As in 'jbd2_fc_wait_bufs' if buffer isn't uptodate, will return -EIO without update 'journal->j_fc_off'. But 'jbd2_fc_release_bufs' will release buffer head from ‘j_fc_off - 1’ if 'bh' is NULL will terminal release which will lead to buffer head buffer head reference count leak. To solve above issue, update 'journal->j_fc_off' before return -EIO. | ||||
| CVE-2022-50840 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: snic: Fix possible UAF in snic_tgt_create() Smatch reports a warning as follows: drivers/scsi/snic/snic_disc.c:307 snic_tgt_create() warn: '&tgt->list' not removed from list If device_add() fails in snic_tgt_create(), tgt will be freed, but tgt->list will not be removed from snic->disc.tgt_list, then list traversal may cause UAF. Remove from snic->disc.tgt_list before free(). | ||||
| CVE-2023-54059 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: soc: mediatek: mtk-svs: Enable the IRQ later If the system does not come from reset (like when is booted via kexec()), the peripheral might triger an IRQ before the data structures are initialised. [ 0.227710] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000f08 [ 0.227913] Call trace: [ 0.227918] svs_isr+0x8c/0x538 | ||||
| CVE-2022-50855 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: prevent leak of lsm program after failed attach In [0], we added the ability to bpf_prog_attach LSM programs to cgroups, but in our validation to make sure the prog is meant to be attached to BPF_LSM_CGROUP, we return too early if the check fails. This results in lack of decrementing prog's refcnt (through bpf_prog_put) leaving the LSM program alive past the point of the expected lifecycle. This fix allows for the decrement to take place. [0] https://lore.kernel.org/all/20220628174314.1216643-4-sdf@google.com/ | ||||
| CVE-2022-50858 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: alcor: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path. So fix this by checking the return value and calling mmc_free_host() in the error path. | ||||
| CVE-2025-71199 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: at91-sama5d2_adc: Fix potential use-after-free in sama5d2_adc driver at91_adc_interrupt can call at91_adc_touch_data_handler function to start the work by schedule_work(&st->touch_st.workq). If we remove the module which will call at91_adc_remove to make cleanup, it will free indio_dev through iio_device_unregister but quite a bit later. While the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | at91_adc_workq_handler at91_adc_remove | iio_device_unregister(indio_dev) | //free indio_dev a bit later | | iio_push_to_buffers(indio_dev) | //use indio_dev Fix it by ensuring that the work is canceled before proceeding with the cleanup in at91_adc_remove. | ||||
| CVE-2022-50864 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix shift-out-of-bounds due to too large exponent of block size If field s_log_block_size of superblock data is corrupted and too large, init_nilfs() and load_nilfs() still can trigger a shift-out-of-bounds warning followed by a kernel panic (if panic_on_warn is set): shift exponent 38973 is too large for 32-bit type 'int' Call Trace: <TASK> dump_stack_lvl+0xcd/0x134 ubsan_epilogue+0xb/0x50 __ubsan_handle_shift_out_of_bounds.cold.12+0x17b/0x1f5 init_nilfs.cold.11+0x18/0x1d [nilfs2] nilfs_mount+0x9b5/0x12b0 [nilfs2] ... This fixes the issue by adding and using a new helper function for getting block size with sanity check. | ||||
| CVE-2025-71195 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: xilinx: xdma: Fix regmap max_register The max_register field is assigned the size of the register memory region instead of the offset of the last register. The result is that reading from the regmap via debugfs can cause a segmentation fault: tail /sys/kernel/debug/regmap/xdma.1.auto/registers Unable to handle kernel paging request at virtual address ffff800082f70000 Mem abort info: ESR = 0x0000000096000007 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x07: level 3 translation fault [...] Call trace: regmap_mmio_read32le+0x10/0x30 _regmap_bus_reg_read+0x74/0xc0 _regmap_read+0x68/0x198 regmap_read+0x54/0x88 regmap_read_debugfs+0x140/0x380 regmap_map_read_file+0x30/0x48 full_proxy_read+0x68/0xc8 vfs_read+0xcc/0x310 ksys_read+0x7c/0x120 __arm64_sys_read+0x24/0x40 invoke_syscall.constprop.0+0x64/0x108 do_el0_svc+0xb0/0xd8 el0_svc+0x38/0x130 el0t_64_sync_handler+0x120/0x138 el0t_64_sync+0x194/0x198 Code: aa1e03e9 d503201f f9400000 8b214000 (b9400000) ---[ end trace 0000000000000000 ]--- note: tail[1217] exited with irqs disabled note: tail[1217] exited with preempt_count 1 Segmentation fault | ||||
| CVE-2022-50854 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: virtual_ncidev: Fix memory leak in virtual_nci_send() skb should be free in virtual_nci_send(), otherwise kmemleak will report memleak. Steps for reproduction (simulated in qemu): cd tools/testing/selftests/nci make ./nci_dev BUG: memory leak unreferenced object 0xffff888107588000 (size 208): comm "nci_dev", pid 206, jiffies 4294945376 (age 368.248s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000008d94c8fd>] __alloc_skb+0x1da/0x290 [<00000000278bc7f8>] nci_send_cmd+0xa3/0x350 [<0000000081256a22>] nci_reset_req+0x6b/0xa0 [<000000009e721112>] __nci_request+0x90/0x250 [<000000005d556e59>] nci_dev_up+0x217/0x5b0 [<00000000e618ce62>] nfc_dev_up+0x114/0x220 [<00000000981e226b>] nfc_genl_dev_up+0x94/0xe0 [<000000009bb03517>] genl_family_rcv_msg_doit.isra.14+0x228/0x2d0 [<00000000b7f8c101>] genl_rcv_msg+0x35c/0x640 [<00000000c94075ff>] netlink_rcv_skb+0x11e/0x350 [<00000000440cfb1e>] genl_rcv+0x24/0x40 [<0000000062593b40>] netlink_unicast+0x43f/0x640 [<000000001d0b13cc>] netlink_sendmsg+0x73a/0xbf0 [<000000003272487f>] __sys_sendto+0x324/0x370 [<00000000ef9f1747>] __x64_sys_sendto+0xdd/0x1b0 [<000000001e437841>] do_syscall_64+0x3f/0x90 | ||||
| CVE-2022-50834 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: Fix potential resource leaks nfc_get_device() take reference for the device, add missing nfc_put_device() to release it when not need anymore. Also fix the style warnning by use error EOPNOTSUPP instead of ENOTSUPP. | ||||
| CVE-2023-54034 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Make sure to zero vfio_iommu_type1_info before copying to user Missed a zero initialization here. Most of the struct is filled with a copy_from_user(), however minsz for that copy is smaller than the actual struct by 8 bytes, thus we don't fill the padding. | ||||
| CVE-2023-53708 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: x86: s2idle: Catch multiple ACPI_TYPE_PACKAGE objects If a badly constructed firmware includes multiple `ACPI_TYPE_PACKAGE` objects while evaluating the AMD LPS0 _DSM, there will be a memory leak. Explicitly guard against this. | ||||
| CVE-2025-40295 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fscrypt: fix left shift underflow when inode->i_blkbits > PAGE_SHIFT When simulating an nvme device on qemu with both logical_block_size and physical_block_size set to 8 KiB, an error trace appears during partition table reading at boot time. The issue is caused by inode->i_blkbits being larger than PAGE_SHIFT, which leads to a left shift of -1 and triggering a UBSAN warning. [ 2.697306] ------------[ cut here ]------------ [ 2.697309] UBSAN: shift-out-of-bounds in fs/crypto/inline_crypt.c:336:37 [ 2.697311] shift exponent -1 is negative [ 2.697315] CPU: 3 UID: 0 PID: 274 Comm: (udev-worker) Not tainted 6.18.0-rc2+ #34 PREEMPT(voluntary) [ 2.697317] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 2.697320] Call Trace: [ 2.697324] <TASK> [ 2.697325] dump_stack_lvl+0x76/0xa0 [ 2.697340] dump_stack+0x10/0x20 [ 2.697342] __ubsan_handle_shift_out_of_bounds+0x1e3/0x390 [ 2.697351] bh_get_inode_and_lblk_num.cold+0x12/0x94 [ 2.697359] fscrypt_set_bio_crypt_ctx_bh+0x44/0x90 [ 2.697365] submit_bh_wbc+0xb6/0x190 [ 2.697370] block_read_full_folio+0x194/0x270 [ 2.697371] ? __pfx_blkdev_get_block+0x10/0x10 [ 2.697375] ? __pfx_blkdev_read_folio+0x10/0x10 [ 2.697377] blkdev_read_folio+0x18/0x30 [ 2.697379] filemap_read_folio+0x40/0xe0 [ 2.697382] filemap_get_pages+0x5ef/0x7a0 [ 2.697385] ? mmap_region+0x63/0xd0 [ 2.697389] filemap_read+0x11d/0x520 [ 2.697392] blkdev_read_iter+0x7c/0x180 [ 2.697393] vfs_read+0x261/0x390 [ 2.697397] ksys_read+0x71/0xf0 [ 2.697398] __x64_sys_read+0x19/0x30 [ 2.697399] x64_sys_call+0x1e88/0x26a0 [ 2.697405] do_syscall_64+0x80/0x670 [ 2.697410] ? __x64_sys_newfstat+0x15/0x20 [ 2.697414] ? x64_sys_call+0x204a/0x26a0 [ 2.697415] ? do_syscall_64+0xb8/0x670 [ 2.697417] ? irqentry_exit_to_user_mode+0x2e/0x2a0 [ 2.697420] ? irqentry_exit+0x43/0x50 [ 2.697421] ? exc_page_fault+0x90/0x1b0 [ 2.697422] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 2.697425] RIP: 0033:0x75054cba4a06 [ 2.697426] Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08 [ 2.697427] RSP: 002b:00007fff973723a0 EFLAGS: 00000202 ORIG_RAX: 0000000000000000 [ 2.697430] RAX: ffffffffffffffda RBX: 00005ea9a2c02760 RCX: 000075054cba4a06 [ 2.697432] RDX: 0000000000002000 RSI: 000075054c190000 RDI: 000000000000001b [ 2.697433] RBP: 00007fff973723c0 R08: 0000000000000000 R09: 0000000000000000 [ 2.697434] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000 [ 2.697434] R13: 00005ea9a2c027c0 R14: 00005ea9a2be5608 R15: 00005ea9a2be55f0 [ 2.697436] </TASK> [ 2.697436] ---[ end trace ]--- This situation can happen for block devices because when CONFIG_TRANSPARENT_HUGEPAGE is enabled, the maximum logical_block_size is 64 KiB. set_init_blocksize() then sets the block device inode->i_blkbits to 13, which is within this limit. File I/O does not trigger this problem because for filesystems that do not support the FS_LBS feature, sb_set_blocksize() prevents sb->s_blocksize_bits from being larger than PAGE_SHIFT. During inode allocation, alloc_inode()->inode_init_always() assigns inode->i_blkbits from sb->s_blocksize_bits. Currently, only xfs_fs_type has the FS_LBS flag, and since xfs I/O paths do not reach submit_bh_wbc(), it does not hit the left-shift underflow issue. [EB: use folio_pos() and consolidate the two shifts by i_blkbits] | ||||
| CVE-2022-50868 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwrng: amd - Fix PCI device refcount leak for_each_pci_dev() is implemented by pci_get_device(). The comment of pci_get_device() says that it will increase the reference count for the returned pci_dev and also decrease the reference count for the input pci_dev @from if it is not NULL. If we break for_each_pci_dev() loop with pdev not NULL, we need to call pci_dev_put() to decrease the reference count. Add the missing pci_dev_put() for the normal and error path. | ||||
| CVE-2022-50887 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regulator: core: fix unbalanced of node refcount in regulator_dev_lookup() I got the the following report: OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /i2c/pmic@62/regulators/exten In of_get_regulator(), the node is returned from of_parse_phandle() with refcount incremented, after using it, of_node_put() need be called. | ||||
| CVE-2025-40352 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/mellanox: mlxbf-pmc: add sysfs_attr_init() to count_clock init The lock-related debug logic (CONFIG_LOCK_STAT) in the kernel is noting the following warning when the BlueField-3 SOC is booted: BUG: key ffff00008a3402a8 has not been registered! ------------[ cut here ]------------ DEBUG_LOCKS_WARN_ON(1) WARNING: CPU: 4 PID: 592 at kernel/locking/lockdep.c:4801 lockdep_init_map_type+0x1d4/0x2a0 <snip> Call trace: lockdep_init_map_type+0x1d4/0x2a0 __kernfs_create_file+0x84/0x140 sysfs_add_file_mode_ns+0xcc/0x1cc internal_create_group+0x110/0x3d4 internal_create_groups.part.0+0x54/0xcc sysfs_create_groups+0x24/0x40 device_add+0x6e8/0x93c device_register+0x28/0x40 __hwmon_device_register+0x4b0/0x8a0 devm_hwmon_device_register_with_groups+0x7c/0xe0 mlxbf_pmc_probe+0x1e8/0x3e0 [mlxbf_pmc] platform_probe+0x70/0x110 The mlxbf_pmc driver must call sysfs_attr_init() during the initialization of the "count_clock" data structure to avoid this warning. | ||||
| CVE-2022-50873 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vdpa/vp_vdpa: fix kfree a wrong pointer in vp_vdpa_remove In vp_vdpa_remove(), the code kfree(&vp_vdpa_mgtdev->mgtdev.id_table) uses a reference of pointer as the argument of kfree, which is the wrong pointer and then may hit crash like this: Unable to handle kernel paging request at virtual address 00ffff003363e30c Internal error: Oops: 96000004 [#1] SMP Call trace: rb_next+0x20/0x5c ext4_readdir+0x494/0x5c4 [ext4] iterate_dir+0x168/0x1b4 __se_sys_getdents64+0x68/0x170 __arm64_sys_getdents64+0x24/0x30 el0_svc_common.constprop.0+0x7c/0x1bc do_el0_svc+0x2c/0x94 el0_svc+0x20/0x30 el0_sync_handler+0xb0/0xb4 el0_sync+0x160/0x180 Code: 54000220 f9400441 b4000161 aa0103e0 (f9400821) SMP: stopping secondary CPUs Starting crashdump kernel... | ||||
| CVE-2022-50844 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix type of second parameter in odn_edit_dpm_table() callback With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. A proposed warning in clang aims to catch these at compile time, which reveals: drivers/gpu/drm/amd/amdgpu/../pm/swsmu/amdgpu_smu.c:3008:29: error: incompatible function pointer types initializing 'int (*)(void *, uint32_t, long *, uint32_t)' (aka 'int (*)(void *, unsigned int, long *, unsigned int)') with an expression of type 'int (void *, enum PP_OD_DPM_TABLE_COMMAND, long *, uint32_t)' (aka 'int (void *, enum PP_OD_DPM_TABLE_COMMAND, long *, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict] .odn_edit_dpm_table = smu_od_edit_dpm_table, ^~~~~~~~~~~~~~~~~~~~~ 1 error generated. There are only two implementations of ->odn_edit_dpm_table() in 'struct amd_pm_funcs': smu_od_edit_dpm_table() and pp_odn_edit_dpm_table(). One has a second parameter type of 'enum PP_OD_DPM_TABLE_COMMAND' and the other uses 'u32'. Ultimately, smu_od_edit_dpm_table() calls ->od_edit_dpm_table() from 'struct pptable_funcs' and pp_odn_edit_dpm_table() calls ->odn_edit_dpm_table() from 'struct pp_hwmgr_func', which both have a second parameter type of 'enum PP_OD_DPM_TABLE_COMMAND'. Update the type parameter in both the prototype in 'struct amd_pm_funcs' and pp_odn_edit_dpm_table() to 'enum PP_OD_DPM_TABLE_COMMAND', which cleans up the warning. | ||||