Total
36130 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53123 | 1 Linux | 1 Linux Kernel | 2026-06-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md: wake raid456 reshape waiters before suspend During raid456 reshape, direct IO across the reshape position can sleep in raid5_make_request() waiting for reshape progress while still holding an active_io reference. If userspace then freezes reshape and writes md/suspend_lo or md/suspend_hi, mddev_suspend() kills active_io and waits for all in-flight IO to drain. This can deadlock: the IO needs reshape progress to continue, but the reshape thread is already frozen, so the active_io reference is never dropped and suspend never completes. raid5_prepare_suspend() already wakes wait_for_reshape for dm-raid. Do the same for normal md suspend when reshape is already interrupted, so waiting raid456 IO can abort, drop its reference, and let suspend finish. The mdadm test tests/25raid456-reshape-deadlock reproduces the hang. | ||||
| CVE-2026-53084 | 1 Linux | 1 Linux Kernel | 2026-06-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: return VMA snapshot from task_vma iterator Holding the per-VMA lock across the BPF program body creates a lock ordering problem when helpers acquire locks that depend on mmap_lock: vm_lock -> i_rwsem -> mmap_lock -> vm_lock Snapshot the VMA under the per-VMA lock in _next() via memcpy(), then drop the lock before returning. The BPF program accesses only the snapshot. The verifier only trusts vm_mm and vm_file pointers (see BTF_TYPE_SAFE_TRUSTED_OR_NULL in verifier.c). vm_file is reference- counted with get_file() under the lock and released via fput() on the next iteration or in _destroy(). vm_mm is already correct because lock_vma_under_rcu() verifies vma->vm_mm == mm. All other pointers are left as-is by memcpy() since the verifier treats them as untrusted. | ||||
| CVE-2026-52936 | 1 Linux | 1 Linux Kernel | 2026-06-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: jitterentropy - replace long-held spinlock with mutex jent_kcapi_random() serializes the shared jitterentropy state, but it currently holds a spinlock across the jent_read_entropy() call. That path performs expensive jitter collection and SHA3 conditioning, so parallel readers can trigger stalls as contending waiters spin for the same lock. To prevent non-preemptible lock hold, replace rng->jent_lock with a mutex so contended readers sleep instead of spinning on a shared lock held across expensive entropy generation. | ||||
| CVE-2026-53099 | 1 Linux | 1 Linux Kernel | 2026-06-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Switch CONFIG_CFI_CLANG to CONFIG_CFI This was renamed in commit 23ef9d439769 ("kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI") as it is now a compiler-agnostic option. Using the wrong name results in the code getting compiled out. Meaning the CFI failures for btf_dtor_kfunc_t would still trigger. | ||||
| CVE-2026-52930 | 1 Linux | 1 Linux Kernel | 2026-06-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipc/shm: serialize orphan cleanup with shm_nattch updates shm_destroy_orphaned() walks the shm idr under shm_ids(ns).rwsem, but that does not serialize all fields tested by shm_may_destroy(). In particular, shm_nattch is updated while holding shm_perm.lock, and attach paths can do that without holding the rwsem. Do not decide that an orphaned segment is unused before taking the object lock. Move the shm_may_destroy() check under shm_perm.lock, matching the other destroy paths, and unlock the segment when it no longer qualifies for removal. | ||||
| CVE-2026-52940 | 1 Linux | 1 Linux Kernel | 2026-06-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tun: zero the whole vnet header in tun_put_user() tun_put_user() declares an on-stack struct virtio_net_hdr_v1_hash_tunnel without zeroing it. For a non-tunnel skb, virtio_net_hdr_tnl_from_skb() only initializes the first 10 bytes (sizeof(struct virtio_net_hdr)), leaving bytes 10..23 (num_buffers and the hash/tunnel fields) as stack garbage. An unprivileged user can set the vnet header size to 24 with TUNSETVNETHDRSZ, so __tun_vnet_hdr_put() copies all 24 bytes of the partially-initialized struct to userspace, leaking 14 bytes of kernel stack on every read of a non-tunnel packet. Fix it the same way tun_get_user() already does by zeroing the whole header right after declaration. | ||||
| CVE-2026-52944 | 1 Linux | 1 Linux Kernel | 2026-06-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix FSCTL permission bypass by adding a permission check for FSCTL_SET_SPARSE FSCTL_SET_SPARSE in fsctl_set_sparse() modifies the file's sparse attribute and saves it through xattr without any permission checks. This exposes two issues: 1) A client on a read-only share can change the sparse attribute on files it opened, even though the share is read-only. Other FSCTL write operations already check test_tree_conn_flag(work->tcon, KSMBD_TREE_CONN_FLAG_WRITABLE), but FSCTL_SET_SPARSE does not. 2) Even on writable shares, clients without FILE_WRITE_DATA or FILE_WRITE_ATTRIBUTES access should not modify the sparse attribute. Similar handle-level checks exist in other functions but are missing here. Add both share-level writable check and per-handle access check. Use goto out on error to avoid leaking file references. | ||||
| CVE-2026-53014 | 1 Linux | 1 Linux Kernel | 2026-06-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_mirred: fix wrong device for mac_header_xmit check in tcf_blockcast_redir In tcf_blockcast_redir(), when iterating block ports to redirect packets to multiple devices, the mac_header_xmit flag is queried from the wrong device. The loop sends to dev_prev but queries dev_is_mac_header_xmit(dev) — which is the NEXT device in the iteration, not the one being sent to. This causes tcf_mirred_to_dev() to make incorrect decisions about whether to push or pull the MAC header. When the block contains mixed device types (e.g., an ethernet veth and a tunnel device), intermediate devices get the wrong mac_header_xmit flag, leading to skb header corruption. In the worst case, skb_push_rcsum with an incorrect mac_len can exhaust headroom and panic. The last device in the loop is handled correctly (line 365-366 uses dev_is_mac_header_xmit(dev_prev)), confirming this is a copy-paste oversight for the intermediate devices. Fix by using dev_prev instead of dev for the mac_header_xmit query, consistent with the device actually being sent to. | ||||
| CVE-2026-52963 | 1 Linux | 1 Linux Kernel | 2026-06-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Bound MIDI endpoint descriptor scans snd_usbmidi_get_ms_info() validates the internal MIDIStreaming endpoint descriptor size before using baAssocJackID[], but the descriptor walker can still return a class-specific endpoint descriptor whose bLength exceeds the remaining bytes in the endpoint-extra scan. That leaves later flexible-array reads bounded by bLength, but not by the remaining bytes in the endpoint-extra scan. Stop walking when bLength is zero or extends past the remaining endpoint-extra scan. | ||||
| CVE-2026-52977 | 1 Linux | 1 Linux Kernel | 2026-06-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: futex: Prevent lockup in requeue-PI during signal/ timeout wakeup During wait-requeue-pi (task A) and requeue-PI (task B) the following race can happen: Task A Task B futex_wait_requeue_pi() futex_setup_timer() futex_do_wait() futex_requeue() CLASS(hb, hb1)(&key1); CLASS(hb, hb2)(&key2); *timeout* futex_requeue_pi_wakeup_sync() requeue_state = Q_REQUEUE_PI_IGNORE *blocks on hb->lock* futex_proxy_trylock_atomic() futex_requeue_pi_prepare() Q_REQUEUE_PI_IGNORE => -EAGAIN double_unlock_hb(hb1, hb2) *retry* Task B acquires both hb locks and attempts to acquire the PI-lock of the top most waiter (task B). Task A is leaving early due to a signal/ timeout and started removing itself from the queue. It updates its requeue_state but can not remove it from the list because this requires the hb lock which is owned by task B. Usually task A is able to swoop the lock after task B unlocked it. However if task B is of higher priority then task A may not be able to wake up in time and acquire the lock before task B gets it again. Especially on a UP system where A is never scheduled. As a result task A blocks on the lock and task B busy loops, trying to make progress but live locks the system instead. Tragic. This can be fixed by removing the top most waiter from the list in this case. This allows task B to grab the next top waiter (if any) in the next iteration and make progress. Remove the top most waiter if futex_requeue_pi_prepare() fails. Let the waiter conditionally remove itself from the list in handle_early_requeue_pi_wakeup(). | ||||
| CVE-2026-11877 | 2 Microfocus, Opentext | 2 Access Manager, Access Manager | 2026-06-24 | 7.5 High |
| An unauthorized user can modify configuration through API calls that affects the OpenText Access Manager. This issue affects Access Manager before 5.1.3. | ||||
| CVE-2026-56340 | 1 Vllm | 1 Vllm | 2026-06-24 | 8.8 High |
| vLLM versions >= 0.10.2 and < 0.13.0 are missing sparse tensor validation in multimodal embeddings processing. Because PyTorch disables sparse tensor invariant checks by default, an attacker can submit crafted embedding requests with malformed (negative or out-of-bounds) tensor indices, when the prompt-embeds feature is enabled, to trigger crashes or resource exhaustion (denial of service), with potential for out-of-bounds/write-what-where memory corruption. This continues CVE-2025-62164, whose prior fix only disabled the feature by default rather than addressing the root cause. | ||||
| CVE-2026-52926 | 1 Linux | 1 Linux Kernel | 2026-06-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: clear current gateway during teardown batadv_gw_node_free() removes the gateway list entries during mesh teardown, but it does not clear the currently selected gateway. This leaves stale gateway state behind across cleanup and can break a later mesh recreation. Clear bat_priv->gw.curr_gw before walking the gateway list so the selected gateway reference is dropped as part of teardown. | ||||
| CVE-2026-47907 | 3 Adobe, Apple, Microsoft | 3 Dreamweaver, Macos, Windows | 2026-06-23 | 8.6 High |
| Dreamweaver Desktop versions 21.7 and earlier are affected by an Improper Access Control vulnerability that could result in arbitrary code execution in the context of the current user. An attacker could exploit this vulnerability to execute arbitrary code. Exploitation of this issue requires user interaction in that a victim must open a malicious file. Scope is changed. | ||||
| CVE-2026-7664 | 2 Ibm, Langflow | 2 Langflow Oss, Langflow | 2026-06-23 | 9.8 Critical |
| IBM Langflow OSS 1.0.0 through 1.8.4 could allow unauthenticated attackers to access protected MCP project resources and execute MCP operations due to improper authorization enforcement in the Streamable MCP transport endpoint. | ||||
| CVE-2023-5868 | 2 Postgresql, Redhat | 22 Postgresql, Advanced Cluster Security, Codeready Linux Builder Eus and 19 more | 2026-06-23 | 4.3 Medium |
| A memory disclosure vulnerability was found in PostgreSQL that allows remote users to access sensitive information by exploiting certain aggregate function calls with 'unknown'-type arguments. Handling 'unknown'-type values from string literals without type designation can disclose bytes, potentially revealing notable and confidential information. This issue exists due to excessive data output in aggregate function calls, enabling remote users to read some portion of system memory. | ||||
| CVE-2026-48584 | 1 Microsoft | 1 Azure Synapse | 2026-06-22 | 9.9 Critical |
| Execution with unnecessary privileges in Azure Synapse allows an authorized attacker to elevate privileges over a network. | ||||
| CVE-2026-12620 | 1 Microchip | 2 Gridtime 3000, Gridtime 3000 Firmware | 2026-06-22 | 6.5 Medium |
| The GridTime 3000 GNSS Time Server leaks the access token in the URL parameters of some endpoints. This issue affects GridTime 3000: from 1.0r0.03 through 1.1r0.0. | ||||
| CVE-2026-46322 | 1 Linux | 1 Linux Kernel | 2026-06-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: tun: free page on build_skb failure in tun_xdp_one() When build_skb() fails in tun_xdp_one(), the function sets ret to -ENOMEM and jumps to the out label, which returns without freeing the page that vhost_net_build_xdp() allocated for the frame. As with the short-frame rejection path, tun_sendmsg() discards the per-buffer error and still returns total_len, so vhost_tx_batch() takes the success path and never frees the page. Each build_skb() failure in a batch leaks one page-frag chunk. Free the page before taking the error path, matching the put_page() the other error exits of tun_xdp_one() already perform. | ||||
| CVE-2026-46321 | 1 Linux | 1 Linux Kernel | 2026-06-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: tun: free page on short-frame rejection in tun_xdp_one() tun_xdp_one() returns -EINVAL on a frame shorter than ETH_HLEN without freeing the page that vhost_net_build_xdp() allocated for it. tun_sendmsg() discards that -EINVAL and still returns total_len, so vhost_tx_batch() takes the success path and never frees the page; each short frame in a batch leaks one page-frag chunk. A local process that can open /dev/net/tun and /dev/vhost-net can hit this path: it attaches a tun/tap device as the vhost-net backend and feeds TX descriptors whose length minus the virtio-net header is below ETH_HLEN. Each kick leaks the page-frag chunks for that batch, and a tight submission loop exhausts host memory and triggers an OOM panic. Free the page before returning -EINVAL, matching the XDP-program error path in the same function. | ||||