Filtered by vendor Redhat
Subscriptions
Filtered by product Enterprise Linux
Subscriptions
Total
15504 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-22126 | 2 Linux, Redhat | 4 Linux Kernel, Enterprise Linux, Rhel E4s and 1 more | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: md: fix mddev uaf while iterating all_mddevs list While iterating all_mddevs list from md_notify_reboot() and md_exit(), list_for_each_entry_safe is used, and this can race with deletint the next mddev, causing UAF: t1: spin_lock //list_for_each_entry_safe(mddev, n, ...) mddev_get(mddev1) // assume mddev2 is the next entry spin_unlock t2: //remove mddev2 ... mddev_free spin_lock list_del spin_unlock kfree(mddev2) mddev_put(mddev1) spin_lock //continue dereference mddev2->all_mddevs The old helper for_each_mddev() actually grab the reference of mddev2 while holding the lock, to prevent from being freed. This problem can be fixed the same way, however, the code will be complex. Hence switch to use list_for_each_entry, in this case mddev_put() can free the mddev1 and it's not safe as well. Refer to md_seq_show(), also factor out a helper mddev_put_locked() to fix this problem. | ||||
| CVE-2025-22055 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: fix geneve_opt length integer overflow struct geneve_opt uses 5 bit length for each single option, which means every vary size option should be smaller than 128 bytes. However, all current related Netlink policies cannot promise this length condition and the attacker can exploit a exact 128-byte size option to *fake* a zero length option and confuse the parsing logic, further achieve heap out-of-bounds read. One example crash log is like below: [ 3.905425] ================================================================== [ 3.905925] BUG: KASAN: slab-out-of-bounds in nla_put+0xa9/0xe0 [ 3.906255] Read of size 124 at addr ffff888005f291cc by task poc/177 [ 3.906646] [ 3.906775] CPU: 0 PID: 177 Comm: poc-oob-read Not tainted 6.1.132 #1 [ 3.907131] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 [ 3.907784] Call Trace: [ 3.907925] <TASK> [ 3.908048] dump_stack_lvl+0x44/0x5c [ 3.908258] print_report+0x184/0x4be [ 3.909151] kasan_report+0xc5/0x100 [ 3.909539] kasan_check_range+0xf3/0x1a0 [ 3.909794] memcpy+0x1f/0x60 [ 3.909968] nla_put+0xa9/0xe0 [ 3.910147] tunnel_key_dump+0x945/0xba0 [ 3.911536] tcf_action_dump_1+0x1c1/0x340 [ 3.912436] tcf_action_dump+0x101/0x180 [ 3.912689] tcf_exts_dump+0x164/0x1e0 [ 3.912905] fw_dump+0x18b/0x2d0 [ 3.913483] tcf_fill_node+0x2ee/0x460 [ 3.914778] tfilter_notify+0xf4/0x180 [ 3.915208] tc_new_tfilter+0xd51/0x10d0 [ 3.918615] rtnetlink_rcv_msg+0x4a2/0x560 [ 3.919118] netlink_rcv_skb+0xcd/0x200 [ 3.919787] netlink_unicast+0x395/0x530 [ 3.921032] netlink_sendmsg+0x3d0/0x6d0 [ 3.921987] __sock_sendmsg+0x99/0xa0 [ 3.922220] __sys_sendto+0x1b7/0x240 [ 3.922682] __x64_sys_sendto+0x72/0x90 [ 3.922906] do_syscall_64+0x5e/0x90 [ 3.923814] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 3.924122] RIP: 0033:0x7e83eab84407 [ 3.924331] Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 faf [ 3.925330] RSP: 002b:00007ffff505e370 EFLAGS: 00000202 ORIG_RAX: 000000000000002c [ 3.925752] RAX: ffffffffffffffda RBX: 00007e83eaafa740 RCX: 00007e83eab84407 [ 3.926173] RDX: 00000000000001a8 RSI: 00007ffff505e3c0 RDI: 0000000000000003 [ 3.926587] RBP: 00007ffff505f460 R08: 00007e83eace1000 R09: 000000000000000c [ 3.926977] R10: 0000000000000000 R11: 0000000000000202 R12: 00007ffff505f3c0 [ 3.927367] R13: 00007ffff505f5c8 R14: 00007e83ead1b000 R15: 00005d4fbbe6dcb8 Fix these issues by enforing correct length condition in related policies. | ||||
| CVE-2025-22004 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: atm: fix use after free in lec_send() The ->send() operation frees skb so save the length before calling ->send() to avoid a use after free. | ||||
| CVE-2025-21999 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: proc: fix UAF in proc_get_inode() Fix race between rmmod and /proc/XXX's inode instantiation. The bug is that pde->proc_ops don't belong to /proc, it belongs to a module, therefore dereferencing it after /proc entry has been registered is a bug unless use_pde/unuse_pde() pair has been used. use_pde/unuse_pde can be avoided (2 atomic ops!) because pde->proc_ops never changes so information necessary for inode instantiation can be saved _before_ proc_register() in PDE itself and used later, avoiding pde->proc_ops->... dereference. rmmod lookup sys_delete_module proc_lookup_de pde_get(de); proc_get_inode(dir->i_sb, de); mod->exit() proc_remove remove_proc_subtree proc_entry_rundown(de); free_module(mod); if (S_ISREG(inode->i_mode)) if (de->proc_ops->proc_read_iter) --> As module is already freed, will trigger UAF BUG: unable to handle page fault for address: fffffbfff80a702b PGD 817fc4067 P4D 817fc4067 PUD 817fc0067 PMD 102ef4067 PTE 0 Oops: Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 26 UID: 0 PID: 2667 Comm: ls Tainted: G Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:proc_get_inode+0x302/0x6e0 RSP: 0018:ffff88811c837998 EFLAGS: 00010a06 RAX: dffffc0000000000 RBX: ffffffffc0538140 RCX: 0000000000000007 RDX: 1ffffffff80a702b RSI: 0000000000000001 RDI: ffffffffc0538158 RBP: ffff8881299a6000 R08: 0000000067bbe1e5 R09: 1ffff11023906f20 R10: ffffffffb560ca07 R11: ffffffffb2b43a58 R12: ffff888105bb78f0 R13: ffff888100518048 R14: ffff8881299a6004 R15: 0000000000000001 FS: 00007f95b9686840(0000) GS:ffff8883af100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff80a702b CR3: 0000000117dd2000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> proc_lookup_de+0x11f/0x2e0 __lookup_slow+0x188/0x350 walk_component+0x2ab/0x4f0 path_lookupat+0x120/0x660 filename_lookup+0x1ce/0x560 vfs_statx+0xac/0x150 __do_sys_newstat+0x96/0x110 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e [adobriyan@gmail.com: don't do 2 atomic ops on the common path] | ||||
| CVE-2025-21993 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: iscsi_ibft: Fix UBSAN shift-out-of-bounds warning in ibft_attr_show_nic() When performing an iSCSI boot using IPv6, iscsistart still reads the /sys/firmware/ibft/ethernetX/subnet-mask entry. Since the IPv6 prefix length is 64, this causes the shift exponent to become negative, triggering a UBSAN warning. As the concept of a subnet mask does not apply to IPv6, the value is set to ~0 to suppress the warning message. | ||||
| CVE-2025-21991 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/microcode/AMD: Fix out-of-bounds on systems with CPU-less NUMA nodes Currently, load_microcode_amd() iterates over all NUMA nodes, retrieves their CPU masks and unconditionally accesses per-CPU data for the first CPU of each mask. According to Documentation/admin-guide/mm/numaperf.rst: "Some memory may share the same node as a CPU, and others are provided as memory only nodes." Therefore, some node CPU masks may be empty and wouldn't have a "first CPU". On a machine with far memory (and therefore CPU-less NUMA nodes): - cpumask_of_node(nid) is 0 - cpumask_first(0) is CONFIG_NR_CPUS - cpu_data(CONFIG_NR_CPUS) accesses the cpu_info per-CPU array at an index that is 1 out of bounds This does not have any security implications since flashing microcode is a privileged operation but I believe this has reliability implications by potentially corrupting memory while flashing a microcode update. When booting with CONFIG_UBSAN_BOUNDS=y on an AMD machine that flashes a microcode update. I get the following splat: UBSAN: array-index-out-of-bounds in arch/x86/kernel/cpu/microcode/amd.c:X:Y index 512 is out of range for type 'unsigned long[512]' [...] Call Trace: dump_stack __ubsan_handle_out_of_bounds load_microcode_amd request_microcode_amd reload_store kernfs_fop_write_iter vfs_write ksys_write do_syscall_64 entry_SYSCALL_64_after_hwframe Change the loop to go over only NUMA nodes which have CPUs before determining whether the first CPU on the respective node needs microcode update. [ bp: Massage commit message, fix typo. ] | ||||
| CVE-2025-21926 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: gso: fix ownership in __udp_gso_segment In __udp_gso_segment the skb destructor is removed before segmenting the skb but the socket reference is kept as-is. This is an issue if the original skb is later orphaned as we can hit the following bug: kernel BUG at ./include/linux/skbuff.h:3312! (skb_orphan) RIP: 0010:ip_rcv_core+0x8b2/0xca0 Call Trace: ip_rcv+0xab/0x6e0 __netif_receive_skb_one_core+0x168/0x1b0 process_backlog+0x384/0x1100 __napi_poll.constprop.0+0xa1/0x370 net_rx_action+0x925/0xe50 The above can happen following a sequence of events when using OpenVSwitch, when an OVS_ACTION_ATTR_USERSPACE action precedes an OVS_ACTION_ATTR_OUTPUT action: 1. OVS_ACTION_ATTR_USERSPACE is handled (in do_execute_actions): the skb goes through queue_gso_packets and then __udp_gso_segment, where its destructor is removed. 2. The segments' data are copied and sent to userspace. 3. OVS_ACTION_ATTR_OUTPUT is handled (in do_execute_actions) and the same original skb is sent to its path. 4. If it later hits skb_orphan, we hit the bug. Fix this by also removing the reference to the socket in __udp_gso_segment. | ||||
| CVE-2025-21920 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: vlan: enforce underlying device type Currently, VLAN devices can be created on top of non-ethernet devices. Besides the fact that it doesn't make much sense, this also causes a bug which leaks the address of a kernel function to usermode. When creating a VLAN device, we initialize GARP (garp_init_applicant) and MRP (mrp_init_applicant) for the underlying device. As part of the initialization process, we add the multicast address of each applicant to the underlying device, by calling dev_mc_add. __dev_mc_add uses dev->addr_len to determine the length of the new multicast address. This causes an out-of-bounds read if dev->addr_len is greater than 6, since the multicast addresses provided by GARP and MRP are only 6 bytes long. This behaviour can be reproduced using the following commands: ip tunnel add gretest mode ip6gre local ::1 remote ::2 dev lo ip l set up dev gretest ip link add link gretest name vlantest type vlan id 100 Then, the following command will display the address of garp_pdu_rcv: ip maddr show | grep 01:80:c2:00:00:21 Fix the bug by enforcing the type of the underlying device during VLAN device initialization. | ||||
| CVE-2025-21764 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ndisc: use RCU protection in ndisc_alloc_skb() ndisc_alloc_skb() can be called without RTNL or RCU being held. Add RCU protection to avoid possible UAF. | ||||
| CVE-2025-21756 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vsock: Keep the binding until socket destruction Preserve sockets bindings; this includes both resulting from an explicit bind() and those implicitly bound through autobind during connect(). Prevents socket unbinding during a transport reassignment, which fixes a use-after-free: 1. vsock_create() (refcnt=1) calls vsock_insert_unbound() (refcnt=2) 2. transport->release() calls vsock_remove_bound() without checking if sk was bound and moved to bound list (refcnt=1) 3. vsock_bind() assumes sk is in unbound list and before __vsock_insert_bound(vsock_bound_sockets()) calls __vsock_remove_bound() which does: list_del_init(&vsk->bound_table); // nop sock_put(&vsk->sk); // refcnt=0 BUG: KASAN: slab-use-after-free in __vsock_bind+0x62e/0x730 Read of size 4 at addr ffff88816b46a74c by task a.out/2057 dump_stack_lvl+0x68/0x90 print_report+0x174/0x4f6 kasan_report+0xb9/0x190 __vsock_bind+0x62e/0x730 vsock_bind+0x97/0xe0 __sys_bind+0x154/0x1f0 __x64_sys_bind+0x6e/0xb0 do_syscall_64+0x93/0x1b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Allocated by task 2057: kasan_save_stack+0x1e/0x40 kasan_save_track+0x10/0x30 __kasan_slab_alloc+0x85/0x90 kmem_cache_alloc_noprof+0x131/0x450 sk_prot_alloc+0x5b/0x220 sk_alloc+0x2c/0x870 __vsock_create.constprop.0+0x2e/0xb60 vsock_create+0xe4/0x420 __sock_create+0x241/0x650 __sys_socket+0xf2/0x1a0 __x64_sys_socket+0x6e/0xb0 do_syscall_64+0x93/0x1b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 2057: kasan_save_stack+0x1e/0x40 kasan_save_track+0x10/0x30 kasan_save_free_info+0x37/0x60 __kasan_slab_free+0x4b/0x70 kmem_cache_free+0x1a1/0x590 __sk_destruct+0x388/0x5a0 __vsock_bind+0x5e1/0x730 vsock_bind+0x97/0xe0 __sys_bind+0x154/0x1f0 __x64_sys_bind+0x6e/0xb0 do_syscall_64+0x93/0x1b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e refcount_t: addition on 0; use-after-free. WARNING: CPU: 7 PID: 2057 at lib/refcount.c:25 refcount_warn_saturate+0xce/0x150 RIP: 0010:refcount_warn_saturate+0xce/0x150 __vsock_bind+0x66d/0x730 vsock_bind+0x97/0xe0 __sys_bind+0x154/0x1f0 __x64_sys_bind+0x6e/0xb0 do_syscall_64+0x93/0x1b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e refcount_t: underflow; use-after-free. WARNING: CPU: 7 PID: 2057 at lib/refcount.c:28 refcount_warn_saturate+0xee/0x150 RIP: 0010:refcount_warn_saturate+0xee/0x150 vsock_remove_bound+0x187/0x1e0 __vsock_release+0x383/0x4a0 vsock_release+0x90/0x120 __sock_release+0xa3/0x250 sock_close+0x14/0x20 __fput+0x359/0xa80 task_work_run+0x107/0x1d0 do_exit+0x847/0x2560 do_group_exit+0xb8/0x250 __x64_sys_exit_group+0x3a/0x50 x64_sys_call+0xfec/0x14f0 do_syscall_64+0x93/0x1b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e | ||||
| CVE-2025-21727 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: padata: fix UAF in padata_reorder A bug was found when run ltp test: BUG: KASAN: slab-use-after-free in padata_find_next+0x29/0x1a0 Read of size 4 at addr ffff88bbfe003524 by task kworker/u113:2/3039206 CPU: 0 PID: 3039206 Comm: kworker/u113:2 Kdump: loaded Not tainted 6.6.0+ Workqueue: pdecrypt_parallel padata_parallel_worker Call Trace: <TASK> dump_stack_lvl+0x32/0x50 print_address_description.constprop.0+0x6b/0x3d0 print_report+0xdd/0x2c0 kasan_report+0xa5/0xd0 padata_find_next+0x29/0x1a0 padata_reorder+0x131/0x220 padata_parallel_worker+0x3d/0xc0 process_one_work+0x2ec/0x5a0 If 'mdelay(10)' is added before calling 'padata_find_next' in the 'padata_reorder' function, this issue could be reproduced easily with ltp test (pcrypt_aead01). This can be explained as bellow: pcrypt_aead_encrypt ... padata_do_parallel refcount_inc(&pd->refcnt); // add refcnt ... padata_do_serial padata_reorder // pd while (1) { padata_find_next(pd, true); // using pd queue_work_on ... padata_serial_worker crypto_del_alg padata_put_pd_cnt // sub refcnt padata_free_shell padata_put_pd(ps->pd); // pd is freed // loop again, but pd is freed // call padata_find_next, UAF } In the padata_reorder function, when it loops in 'while', if the alg is deleted, the refcnt may be decreased to 0 before entering 'padata_find_next', which leads to UAF. As mentioned in [1], do_serial is supposed to be called with BHs disabled and always happen under RCU protection, to address this issue, add synchronize_rcu() in 'padata_free_shell' wait for all _do_serial calls to finish. [1] https://lore.kernel.org/all/20221028160401.cccypv4euxikusiq@parnassus.localdomain/ [2] https://lore.kernel.org/linux-kernel/jfjz5d7zwbytztackem7ibzalm5lnxldi2eofeiczqmqs2m7o6@fq426cwnjtkm/ | ||||
| CVE-2025-21587 | 2 Oracle, Redhat | 12 Graalvm, Graalvm For Jdk, Jdk and 9 more | 2025-11-03 | 7.4 High |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: JSSE). Supported versions that are affected are Oracle Java SE:8u441, 8u441-perf, 11.0.26, 17.0.14, 21.0.6, 24; Oracle GraalVM for JDK:17.0.14, 21.0.6, 24; Oracle GraalVM Enterprise Edition:20.3.17 and 21.3.13. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data as well as unauthorized access to critical data or complete access to all Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 7.4 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N). | ||||
| CVE-2025-1080 | 1 Redhat | 6 Enterprise Linux, Rhel Aus, Rhel E4s and 3 more | 2025-11-03 | 7.6 High |
| LibreOffice supports Office URI Schemes to enable browser integration of LibreOffice with MS SharePoint server. An additional scheme 'vnd.libreoffice.command' specific to LibreOffice was added. In the affected versions of LibreOffice a link in a browser using that scheme could be constructed with an embedded inner URL that when passed to LibreOffice could call internal macros with arbitrary arguments. This issue affects LibreOffice: from 24.8 before < 24.8.5, from 25.2 before < 25.2.1. | ||||
| CVE-2024-58069 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rtc: pcf85063: fix potential OOB write in PCF85063 NVMEM read The nvmem interface supports variable buffer sizes, while the regmap interface operates with fixed-size storage. If an nvmem client uses a buffer size less than 4 bytes, regmap_read will write out of bounds as it expects the buffer to point at an unsigned int. Fix this by using an intermediary unsigned int to hold the value. | ||||
| CVE-2024-58009 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: handle NULL sock pointer in l2cap_sock_alloc A NULL sock pointer is passed into l2cap_sock_alloc() when it is called from l2cap_sock_new_connection_cb() and the error handling paths should also be aware of it. Seemingly a more elegant solution would be to swap bt_sock_alloc() and l2cap_chan_create() calls since they are not interdependent to that moment but then l2cap_chan_create() adds the soon to be deallocated and still dummy-initialized channel to the global list accessible by many L2CAP paths. The channel would be removed from the list in short period of time but be a bit more straight-forward here and just check for NULL instead of changing the order of function calls. Found by Linux Verification Center (linuxtesting.org) with SVACE static analysis tool. | ||||
| CVE-2024-58007 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: soc: qcom: socinfo: Avoid out of bounds read of serial number On MSM8916 devices, the serial number exposed in sysfs is constant and does not change across individual devices. It's always: db410c:/sys/devices/soc0$ cat serial_number 2644893864 The firmware used on MSM8916 exposes SOCINFO_VERSION(0, 8), which does not have support for the serial_num field in the socinfo struct. There is an existing check to avoid exposing the serial number in that case, but it's not correct: When checking the item_size returned by SMEM, we need to make sure the *end* of the serial_num is within bounds, instead of comparing with the *start* offset. The serial_number currently exposed on MSM8916 devices is just an out of bounds read of whatever comes after the socinfo struct in SMEM. Fix this by changing offsetof() to offsetofend(), so that the size of the field is also taken into account. | ||||
| CVE-2024-58005 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tpm: Change to kvalloc() in eventlog/acpi.c The following failure was reported on HPE ProLiant D320: [ 10.693310][ T1] tpm_tis STM0925:00: 2.0 TPM (device-id 0x3, rev-id 0) [ 10.848132][ T1] ------------[ cut here ]------------ [ 10.853559][ T1] WARNING: CPU: 59 PID: 1 at mm/page_alloc.c:4727 __alloc_pages_noprof+0x2ca/0x330 [ 10.862827][ T1] Modules linked in: [ 10.866671][ T1] CPU: 59 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-lp155.2.g52785e2-default #1 openSUSE Tumbleweed (unreleased) 588cd98293a7c9eba9013378d807364c088c9375 [ 10.882741][ T1] Hardware name: HPE ProLiant DL320 Gen12/ProLiant DL320 Gen12, BIOS 1.20 10/28/2024 [ 10.892170][ T1] RIP: 0010:__alloc_pages_noprof+0x2ca/0x330 [ 10.898103][ T1] Code: 24 08 e9 4a fe ff ff e8 34 36 fa ff e9 88 fe ff ff 83 fe 0a 0f 86 b3 fd ff ff 80 3d 01 e7 ce 01 00 75 09 c6 05 f8 e6 ce 01 01 <0f> 0b 45 31 ff e9 e5 fe ff ff f7 c2 00 00 08 00 75 42 89 d9 80 e1 [ 10.917750][ T1] RSP: 0000:ffffb7cf40077980 EFLAGS: 00010246 [ 10.923777][ T1] RAX: 0000000000000000 RBX: 0000000000040cc0 RCX: 0000000000000000 [ 10.931727][ T1] RDX: 0000000000000000 RSI: 000000000000000c RDI: 0000000000040cc0 The above transcript shows that ACPI pointed a 16 MiB buffer for the log events because RSI maps to the 'order' parameter of __alloc_pages_noprof(). Address the bug by moving from devm_kmalloc() to devm_add_action() and kvmalloc() and devm_add_action(). | ||||
| CVE-2024-57979 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: pps: Fix a use-after-free On a board running ntpd and gpsd, I'm seeing a consistent use-after-free in sys_exit() from gpsd when rebooting: pps pps1: removed ------------[ cut here ]------------ kobject: '(null)' (00000000db4bec24): is not initialized, yet kobject_put() is being called. WARNING: CPU: 2 PID: 440 at lib/kobject.c:734 kobject_put+0x120/0x150 CPU: 2 UID: 299 PID: 440 Comm: gpsd Not tainted 6.11.0-rc6-00308-gb31c44928842 #1 Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kobject_put+0x120/0x150 lr : kobject_put+0x120/0x150 sp : ffffffc0803d3ae0 x29: ffffffc0803d3ae0 x28: ffffff8042dc9738 x27: 0000000000000001 x26: 0000000000000000 x25: ffffff8042dc9040 x24: ffffff8042dc9440 x23: ffffff80402a4620 x22: ffffff8042ef4bd0 x21: ffffff80405cb600 x20: 000000000008001b x19: ffffff8040b3b6e0 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 696e6920746f6e20 x14: 7369203a29343263 x13: 205d303434542020 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: kobject_put+0x120/0x150 cdev_put+0x20/0x3c __fput+0x2c4/0x2d8 ____fput+0x1c/0x38 task_work_run+0x70/0xfc do_exit+0x2a0/0x924 do_group_exit+0x34/0x90 get_signal+0x7fc/0x8c0 do_signal+0x128/0x13b4 do_notify_resume+0xdc/0x160 el0_svc+0xd4/0xf8 el0t_64_sync_handler+0x140/0x14c el0t_64_sync+0x190/0x194 ---[ end trace 0000000000000000 ]--- ...followed by more symptoms of corruption, with similar stacks: refcount_t: underflow; use-after-free. kernel BUG at lib/list_debug.c:62! Kernel panic - not syncing: Oops - BUG: Fatal exception This happens because pps_device_destruct() frees the pps_device with the embedded cdev immediately after calling cdev_del(), but, as the comment above cdev_del() notes, fops for previously opened cdevs are still callable even after cdev_del() returns. I think this bug has always been there: I can't explain why it suddenly started happening every time I reboot this particular board. In commit d953e0e837e6 ("pps: Fix a use-after free bug when unregistering a source."), George Spelvin suggested removing the embedded cdev. That seems like the simplest way to fix this, so I've implemented his suggestion, using __register_chrdev() with pps_idr becoming the source of truth for which minor corresponds to which device. But now that pps_idr defines userspace visibility instead of cdev_add(), we need to be sure the pps->dev refcount can't reach zero while userspace can still find it again. So, the idr_remove() call moves to pps_unregister_cdev(), and pps_idr now holds a reference to pps->dev. pps_core: source serial1 got cdev (251:1) <...> pps pps1: removed pps_core: unregistering pps1 pps_core: deallocating pps1 | ||||
| CVE-2024-56326 | 2 Palletsprojects, Redhat | 15 Jinja, Ansible Automation Platform, Discovery and 12 more | 2025-11-03 | 7.8 High |
| Jinja is an extensible templating engine. Prior to 3.1.5, An oversight in how the Jinja sandboxed environment detects calls to str.format allows an attacker that controls the content of a template to execute arbitrary Python code. To exploit the vulnerability, an attacker needs to control the content of a template. Whether that is the case depends on the type of application using Jinja. This vulnerability impacts users of applications which execute untrusted templates. Jinja's sandbox does catch calls to str.format and ensures they don't escape the sandbox. However, it's possible to store a reference to a malicious string's format method, then pass that to a filter that calls it. No such filters are built-in to Jinja, but could be present through custom filters in an application. After the fix, such indirect calls are also handled by the sandbox. This vulnerability is fixed in 3.1.5. | ||||
| CVE-2024-54677 | 3 Apache, Netapp, Redhat | 4 Tomcat, Bootstrap Os, Hci Compute Node and 1 more | 2025-11-03 | 5.3 Medium |
| Uncontrolled Resource Consumption vulnerability in the examples web application provided with Apache Tomcat leads to denial of service. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.1, from 10.1.0-M1 through 10.1.33, from 9.0.0.M1 through 9.9.97. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions may also be affected. Users are recommended to upgrade to version 11.0.2, 10.1.34 or 9.0.98, which fixes the issue. | ||||