Total
849 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-14760 | 2 Radare, Radareorg | 2 Radare2, Radare2 | 2026-07-29 | 3.3 Low |
| A weakness has been identified in radareorg radare2 up to 6.1.6. Impacted is the function r_core_seek_arch_bits of the file libr/core/disasm.c of the component regprofile Handler. Executing a manipulation can lead to use after free. The attack requires local access. The exploit has been made available to the public and could be used for attacks. This patch is called 8b25c773785d85cb0103410a0905089d286921c2. It is advisable to implement a patch to correct this issue. | ||||
| CVE-2026-17523 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-07-29 | 7.8 High |
| A flaw was found in the Linux kernel in net/can/bcm.c in can: bcm, where an unprivileged local user can exploit this vulnerability to execute arbitrary code within the kernel, which leads to a local privilege escalation (LPE). This allows the attacker to gain root privileges and take full control of the affected system. | ||||
| CVE-2026-64032 | 1 Linux | 1 Linux Kernel | 2026-07-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bridge: mcast: Fix a possible use-after-free when removing a bridge port When per-VLAN multicast snooping is enabled, the bridge iterates over all the bridge ports, disables the per-port multicast context on each port and enables the per-{port, VLAN} multicast contexts instead. The reverse happens when per-VLAN multicast snooping is disabled. When global multicast snooping is enabled, the bridge iterates over all the bridge ports and enables the per-port multicast context on each port. The reverse happens when multicast snooping is disabled. The above scheme can result in a situation where both types of contexts (per-port and per-{port, VLAN}) are enabled on a single bridge port: # ip link add name br1 up type bridge mcast_snooping 1 mcast_querier 1 vlan_filtering 1 # ip link add name dummy1 up master br1 type dummy # ip link set dev br1 type bridge mcast_vlan_snooping 1 # ip link set dev br1 type bridge mcast_snooping 0 # ip link set dev br1 type bridge mcast_snooping 1 This is not intended and it is a problem since the commit cited below. Prior to this commit, when removing a bridge port, br_multicast_disable_port() would disable the per-port multicast context and the per-{port, VLAN} multicast contexts would get disabled when flushing VLANs. After this commit, br_multicast_disable_port() only disables the per-port multicast context if per-VLAN multicast snooping is disabled. If both types of contexts were enabled on the port when it was removed, the per-port multicast context would remain enabled when freeing the bridge port, leading to a use-after-free [1]. Fix by preventing the bridge from enabling / disabling the per-port multicast contexts when toggling global multicast snooping if per-VLAN multicast snooping is enabled. [1] ODEBUG: free active (active state 0) object: ffff88810f8bda78 object type: timer_list hint: br_ip6_multicast_port_query_expired (net/bridge/br_multicast.c:1927) WARNING: lib/debugobjects.c:629 at debug_print_object+0x1b1/0x3e0, CPU#5: swapper/5/0 [...] Call Trace: <IRQ> __debug_check_no_obj_freed (lib/debugobjects.c:1116) kfree (mm/slub.c:2620 mm/slub.c:6250 mm/slub.c:6565) kobject_cleanup (lib/kobject.c:689) rcu_do_batch (kernel/rcu/tree.c:2617) rcu_core (kernel/rcu/tree.c:2869) handle_softirqs (kernel/softirq.c:622) __irq_exit_rcu (kernel/softirq.c:656 kernel/softirq.c:496 kernel/softirq.c:735) irq_exit_rcu (kernel/softirq.c:752) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1061 (discriminator 47) arch/x86/kernel/apic/apic.c:1061 (discriminator 47)) </IRQ> | ||||
| CVE-2026-54620 | 1 Sparklemotion | 1 Sqlite3-ruby | 2026-07-28 | 4.5 Medium |
| sqlite3 provides Ruby bindings for the SQLite3 embedded database. From 2.1.0 to 2.9.4, the callbacks used for SQLite aggregate functions can be freed while still referenced during aggregation, resulting in a use-after-free. This issue is fixed in version 2.9.5. | ||||
| CVE-2026-63922 | 1 Linux | 1 Linux Kernel | 2026-07-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: exthdrs: refresh nh after handling HAO option ip6_parse_tlv() caches skb_network_header(skb) in nh while walking IPv6 TLVs. ipv6_dest_hao() may call pskb_expand_head() for a cloned skb, which can move the skb head and invalidate the cached network header pointer. Refresh nh after ipv6_dest_hao() returns so any trailing padding or TLVs are parsed from the current skb head. This matches the existing pattern used in ip6_parse_tlv() after helpers that can modify skb header storage. | ||||
| CVE-2026-15764 | 1 Google | 1 Chrome | 2026-07-28 | 7.5 High |
| Use after free in Ozone in Google Chrome on Linux prior to 150.0.7871.125 allowed a remote attacker who convinced a user to engage in specific UI gestures to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: Critical) | ||||
| CVE-2026-15765 | 1 Google | 1 Chrome | 2026-07-28 | 7.5 High |
| Use after free in Ozone in Google Chrome prior to 150.0.7871.125 allowed a remote attacker who convinced a user to engage in specific UI gestures to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: Critical) | ||||
| CVE-2026-56117 | 2 Dhcpcd Project, Networkconfiguration | 2 Dhcpcd, Dhcpcd | 2026-07-28 | 4.7 Medium |
| dhcpcd through 10.3.2, fixed in commit 78ea09e, contains a heap use-after-free vulnerability in the control socket handling within src/control.c that allows local unprivileged attackers to trigger memory corruption when privilege separation is disabled. Attackers can connect to the control socket and send a privileged command such as -x, causing control_recvdata() to free the client object while the same READ+HANGUP event subsequently reaches control_hangup() with the stale pointer, resulting in a use-after-free condition exploitable in deployments using --disable-privsep or where privsep initialization has failed with the control socket operating in mode 0666. | ||||
| CVE-2026-56113 | 2 Dhcpcd Project, Networkconfiguration | 2 Dhcpcd, Dhcpcd | 2026-07-28 | 5.3 Medium |
| dhcpcd through 10.3.2, fixed in commit 5733d3c, contains a heap use-after-free vulnerability that allows unauthenticated same-link attackers to crash the daemon by sending a crafted DHCPv6 RENEW reply with RFC6603 OPTION_PD_EXCLUDE and both preferred and valid lifetimes set to zero. Attackers acting as or impersonating a DHCPv6 server can trigger dhcp6_deprecatedele() to free a delegated child address while an outer TAILQ_FOREACH_SAFE iterator in dhcp6_deprecateaddrs() still holds the freed pointer, causing a use-after-free when TAILQ_REMOVE is reached. | ||||
| CVE-2026-63927 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: Fix use after free in debug code We're not allowed to dereference "urb" after calling usb_hcd_giveback_urb() so save the urb->status ahead of time. | ||||
| CVE-2026-16411 | 1 Mozilla | 1 Firefox | 2026-07-27 | 9.8 Critical |
| Memory safety bugs present in Firefox 152. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 153 and Thunderbird 153. | ||||
| CVE-2026-16805 | 1 Google | 1 Chrome | 2026-07-27 | 8.8 High |
| Use after free in Blink in Google Chrome prior to 150.0.7871.186 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-64265 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fuse: clear intr_entry in fuse_resend and fuse_remove_pending_req When fuse_resend() moves a request from fpq->processing back to fiq->pending, it sets FR_PENDING and clears FR_SENT but does not remove the requests intr_entry from fiq->interrupts. If the request had FR_INTERRUPTED set from a prior signal, intr_entry remains dangling on fiq->interrupts. When the requesting task then receives a fatal signal, fuse_remove_pending_req() sees FR_PENDING=1, removes the request from fiq->pending and frees it via the refcount path, also without cleaning intr_entry. The stale intr_entry causes use-after-free when fuse_read_interrupt() iterates fiq->interrupts: - list_del_init(&req->intr_entry) -> UAF write on freed slab - req->in.h.unique -> UAF read, data leaked to userspace Remove intr_entry from fiq->interrupts in fuse_resend() for interrupted requests before they are placed back on fiq->pending. Add a WARN_ON if the intr_entry is not empty on request destruction. | ||||
| CVE-2026-64530 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: Handle TC_ACT_CONSUMED in tcf_qevent_handle tcf_classify() can return TC_ACT_CONSUMED while the skb is held by the defragmentation engine (e.g. act_ct on out-of-order fragments). When that happens the skb is no longer owned by the caller and must not be touched again. tcf_qevent_handle() did not handle TC_ACT_CONSUMED: it fell through the switch and returned the skb to the caller as if classification had passed. The only qdisc that wires up qevents today is RED, via three call sites (qe_mark on RED_PROB_MARK/HARD_MARK, qe_early_drop on congestion_drop) red_enqueue() was continuing to operate on an skb it no longer owns in this case -- enqueueing it, dropping it, or updating statistics. Resulting in a UAF. tc qdisc add dev eth0 root handle 1: red ... qevent early_drop block 10 tc filter add block 10 ... action ct (with ct defrag enabled and traffic that produces out-of-order fragments, e.g. a fragmented UDP stream) Handle TC_ACT_CONSUMED in tcf_qevent_handle() the same way the ingress and egress fast paths do: treat it as stolen and return NULL without touching the skb. Unlike the TC_ACT_STOLEN case, the skb must not be dropped/freed here, as it is no longer owned by us. | ||||
| CVE-2026-64523 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/handshake: Take a long-lived file reference at submit handshake_nl_accept_doit() needs the file pointer backing req->hr_sk->sk_socket to survive the window between handshake_req_next() and the subsequent FD_PREPARE() and get_file(). The submit-side sock_hold() does not provide that. sk_refcnt keeps struct sock alive, but struct socket is owned by sock->file: when the consumer fputs the last file reference, sock_release() tears the socket down regardless of any sock_hold. Add an hr_file pointer to struct handshake_req and acquire an explicit reference on sock->file during handshake_req_submit(). handshake_complete() and handshake_req_cancel() release the reference on the completion-bit-winning path. The submit error path must also release the file reference, but after rhashtable insertion a concurrent handshake_req_cancel() can discover the request and race the error path. Gate the error-path cleanup -- sk_destruct restoration, fput, and request destruction -- with test_and_set_bit(HANDSHAKE_F_REQ_COMPLETED), the same serialization handshake_complete() and handshake_req_cancel() already use. When cancel has already claimed ownership, the submit error path returns without touching the request; socket teardown handles final destruction. The accept-side dereferences are not yet retargeted; that change comes in the next patch. | ||||
| CVE-2026-64452 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: 6lowpan: fix NHC entry use-after-free on error path lowpan_nhc_do_uncompression() looks up an NHC descriptor while holding lowpan_nhc_lock. If the descriptor has no uncompress callback, the error path drops the lock before printing nhc->name. lowpan_nhc_del() removes descriptors under the same lock and then relies on synchronize_net() before the owning module can be unloaded. That only waits for net RX RCU readers. lowpan_header_decompress() is also exported and can be reached from callers that are not necessarily covered by the net core RX critical section, for example the Bluetooth 6LoWPAN L2CAP receive path. This leaves a race where one task drops lowpan_nhc_lock in the error path, another task unregisters and frees the matching descriptor after synchronize_net() returns, and the first task then dereferences nhc->name for the warning. With the post-unlock window widened, KASAN reports: BUG: KASAN: slab-use-after-free in lowpan_nhc_do_uncompression+0x1f4/0x220 Read of size 8 lowpan_nhc_do_uncompression lowpan_header_decompress Fix this by printing the warning before dropping lowpan_nhc_lock, so the descriptor name is read while unregister is still excluded. The malformed packet is still rejected with -ENOTSUPP. | ||||
| CVE-2026-64439 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: crypto: krb5 - filter out async aead implementations at alloc krb5_aead_encrypt(), krb5_aead_decrypt() in rfc3961_simplified.c and rfc8009_encrypt(), rfc8009_decrypt() in rfc8009_aes2.c set a NULL completion callback and treat any negative return from crypto_aead_{encrypt,decrypt}() as terminal, falling through to kfree_sensitive(buffer). When the encrypt_name resolves to an async AEAD instance the request returns -EINPROGRESS, the buffer is freed while the backend's worker still holds a pointer, and the worker dereferences the freed slab on completion. KASAN report under UML+SLUB with a synthetic async aead backend bound to krb5->encrypt_name: BUG: KASAN: slab-use-after-free in t5_stub_complete+0x7d/0xc7 The helpers were written synchronously, so filter the async instances out at allocation time instead of plumbing crypto_wait_req() through every call site. Reachable via net/rxrpc/rxgk.c, fs/afs/cm_security.c and net/ceph/crypto.c on systems with an async AEAD provider bound to the krb5 enctype name. | ||||
| CVE-2026-64437 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free of a deferred file_lock on SMB2_CLOSE then SMB2_CANCEL Commit f580d27e8928 ("ksmbd: fix use-after-free of a deferred file_lock on double SMB2_CANCEL") made smb2_cancel() skip a work whose state is KSMBD_WORK_CANCELLED, so its cancel_fn cannot be fired a second time. But KSMBD_WORK has three states (ACTIVE, CANCELLED, CLOSED), and the same freeing producer path is reached for CLOSED too: SMB2_CLOSE on the locking handle -> set_close_state_blocked_works() sets the deferred work's state to KSMBD_WORK_CLOSED and wakes the smb2_lock() worker. The worker takes the non-ACTIVE early-exit, locks_free_lock()s the file_lock and, because the state is not KSMBD_WORK_CANCELLED, takes the STATUS_RANGE_NOT_LOCKED branch with "goto out2" -- which, like the cancelled branch, skips release_async_work(). The work stays on conn->async_requests with a live cancel_fn = smb2_remove_blocked_lock pointing at the freed file_lock. A subsequent SMB2_CANCEL for the same AsyncId then passes the KSMBD_WORK_CANCELLED-only guard (its state is KSMBD_WORK_CLOSED), so smb2_cancel() fires cancel_fn again over the freed file_lock -- the same use-after-free fixed, via SMB2_CLOSE instead of a first SMB2_CANCEL: BUG: KASAN: slab-use-after-free in __locks_delete_block __locks_delete_block locks_delete_block ksmbd_vfs_posix_lock_unblock smb2_remove_blocked_lock smb2_cancel <- 2nd SMB2_CANCEL fires cancel_fn handle_ksmbd_work Allocated by ...: locks_alloc_lock <- smb2_lock Freed by ...: locks_free_lock <- smb2_lock (non-ACTIVE early-exit) ... cache file_lock_cache of size 192 Reproduced on mainline 7.1-rc7 (which already contains f580d27e8928) with KASAN by an authenticated SMB client; the double-SMB2_CANCEL control is silent on that kernel, so the splat is attributable to the CLOSE trigger. Only an ACTIVE deferred work may have its cancel_fn fired: both terminal states (CANCELLED and CLOSED) reach the smb2_lock() early-exit that frees the file_lock and skips release_async_work(). Guard on KSMBD_WORK_ACTIVE so any non-active work is skipped. | ||||
| CVE-2026-64189 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: fix race between dump and ip_set_list resize The release path of ip_set_dump_do() and ip_set_dump_done() read inst->ip_set_list via ip_set_ref_netlink(), a plain rcu_dereference_raw() of the array pointer. These run from netlink_recvmsg() without the nfnl mutex and without an RCU read-side critical section. A concurrent ip_set_create() can grow the array: it publishes the new array, calls synchronize_net() and then kvfree()s the old one. Since the dump paths read the array outside any RCU reader, synchronize_net() does not wait for them and the old array can be freed while they still index into it, causing a use-after-free. The dumped set itself stays pinned via set->ref_netlink, so only the array load needs protecting. Take rcu_read_lock() around it, matching ip_set_get_byname() and __ip_set_put_byindex(). BUG: KASAN: slab-use-after-free in ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697) Read of size 8 at addr ffff88800b5c4018 by task exploit/150 Call Trace: ... kasan_report (mm/kasan/report.c:595) ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697) netlink_dump (net/netlink/af_netlink.c:2325) netlink_recvmsg (net/netlink/af_netlink.c:1976) sock_recvmsg (net/socket.c:1159) __sys_recvfrom (net/socket.c:2315) ... Oops: general protection fault, probably for non-canonical address ... KASAN NOPTI KASAN: maybe wild-memory-access in range [0x02d6...d0-0x02d6...d7] RIP: 0010:ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1698) Kernel panic - not syncing: Fatal exception | ||||
| CVE-2026-64188 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: qualcomm: rmnet: fix endpoint use-after-free in rmnet_dellink() rmnet_dellink() removes the endpoint from the hash table with hlist_del_init_rcu() and then immediately frees it with kfree(). However, RCU readers on the receive path (rmnet_rx_handler -> __rmnet_map_ingress_handler) may still hold a reference to the endpoint and dereference ep->egress_dev after the memory has been freed. The endpoint is a kmalloc-32 object, and the stale read at offset 8 corresponds to the egress_dev pointer. BUG: unable to handle page fault for address: ffffffffde942eef Oops: 0002 [#1] SMP NOPTI CPU: 1 UID: 0 PID: 137 Comm: poc_write Not tainted 7.0.0+ #4 PREEMPTLAZY RIP: 0010:rmnet_vnd_rx_fixup (rmnet_vnd.c:27) Call Trace: <TASK> __rmnet_map_ingress_handler (rmnet_handlers.c:48 rmnet_handlers.c:101) rmnet_rx_handler (rmnet_handlers.c:129 rmnet_handlers.c:235) __netif_receive_skb_core.constprop.0 (net/core/dev.c:6096) __netif_receive_skb_one_core (net/core/dev.c:6208) netif_receive_skb (net/core/dev.c:6467) tun_get_user (drivers/net/tun.c:1955) tun_chr_write_iter (drivers/net/tun.c:2003) vfs_write (fs/read_write.c:688) ksys_write (fs/read_write.c:740) </TASK> Add an rcu_head field to struct rmnet_endpoint and replace kfree() with kfree_rcu() so the endpoint memory remains valid through the RCU grace period. Also remove the rmnet_vnd_dellink() call and inline only the nr_rmnet_devs decrement, since rmnet_vnd_dellink() would set ep->egress_dev to NULL during the grace period, creating a data race with lockless readers. | ||||