Total
508 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-22220 | 1 Juniper | 2 Junos, Junos Os Evolved | 2025-05-12 | 5.9 Medium |
| A Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability in Routing Protocol Daemon (rpd) of Juniper Networks Junos OS, Junos OS Evolved allows a network-based unauthenticated attacker to cause a Denial of Service (DoS). When a BGP flow route with redirect IP extended community is received, and the reachability to the next-hop of the corresponding redirect IP is flapping, the rpd process might crash. Whether the crash occurs depends on the timing of the internally processing of these two events and is outside the attackers control. Please note that this issue also affects Route-Reflectors unless 'routing-options flow firewall-install-disable' is configured. This issue affects: Juniper Networks Junos OS: 18.4 versions prior to 18.4R2-S10, 18.4R3-S10; 19.1 versions prior to 19.1R3-S7; 19.2 versions prior to 19.2R1-S8, 19.2R3-S4; 19.4 versions prior to 19.4R3-S8; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S2; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2. Juniper Networks Junos OS Evolved: All versions prior to 20.4R2-EVO; 21.1-EVO versions prior to 21.1R2-EVO. This issue does not affect Juniper Networks Junos OS versions prior to 18.4R1. | ||||
| CVE-2022-22225 | 1 Juniper | 2 Junos, Junos Os Evolved | 2025-05-12 | 5.9 Medium |
| A Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability in the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated attacker with an established BGP session to cause a Denial of Service (DoS). In a BGP multipath scenario, when one of the contributing routes is flapping often and rapidly, rpd may crash. As this crash depends on whether a route is a contributing route, and on the internal timing of the events triggered by the flap this vulnerability is outside the direct control of a potential attacker. This issue affects: Juniper Networks Junos OS 19.2 versions prior to 19.2R3-S6; 20.2 versions prior to 20.2R3-S4; 20.3 versions prior to 20.3R3-S3; 20.4 versions prior to 20.4R3-S4; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R2; 21.3 versions prior to 21.3R2. Juniper Networks Junos OS Evolved All versions prior to 20.4R3-S4-EVO; 21.1-EVO version 21.1R1-EVO and later versions; 21.2-EVO versions prior to 21.2R2-EVO; 21.3-EVO versions prior to 21.3R2-EVO. This issue does not affect: Juniper Networks Junos OS versions 19.2 versions prior to 19.2R2, 19.3R1 and above prior to 20.2R1. Juniper Networks Junos OS Evolved versions prior to 20.2R1-EVO. | ||||
| CVE-2025-46326 | 1 Snowflake | 1 Snowflake Connector | 2025-05-10 | 3.3 Low |
| snowflake-connector-net is the Snowflake Connector for .NET. Versions starting from 2.1.2 to before 4.4.1, are vulnerable to a Time-of-Check to Time-of-Use (TOCTOU) race condition. When using the Easy Logging feature on Linux and macOS, the Connector reads logging configuration from a user-provided file. On Linux and macOS, the Connector verifies that the configuration file can be written to only by its owner. That check was vulnerable to a TOCTOU race condition and failed to verify that the file owner matches the user running the Connector. This could allow a local attacker with write access to the configuration file or the directory containing it to overwrite the configuration and gain control over logging level and output location. This issue has been patched in version 4.4.1. | ||||
| CVE-2025-46327 | 1 Snowflake | 1 Gosnowflake | 2025-05-09 | 3.3 Low |
| gosnowflake is the Snowflake Golang driver. Versions starting from 1.7.0 to before 1.13.3, are vulnerable to a Time-of-Check to Time-of-Use (TOCTOU) race condition. When using the Easy Logging feature on Linux and macOS, the Driver reads logging configuration from a user-provided file. On Linux and macOS the Driver verifies that the configuration file can be written to only by its owner. That check was vulnerable to a TOCTOU race condition and failed to verify that the file owner matches the user running the Driver. This could allow a local attacker with write access to the configuration file or the directory containing it to overwrite the configuration and gain control over logging level and output location. This issue has been patched in version 1.13.3. | ||||
| CVE-2025-46328 | 1 Snowflake | 1 Snowflake Connector | 2025-05-09 | 3.3 Low |
| snowflake-connector-nodejs is a NodeJS driver for Snowflake. Versions starting from 1.10.0 to before 2.0.4, are vulnerable to a Time-of-Check to Time-of-Use (TOCTOU) race condition. When using the Easy Logging feature on Linux and macOS the Driver reads logging configuration from a user-provided file. On Linux and macOS the Driver verifies that the configuration file can be written to only by its owner. That check was vulnerable to a TOCTOU race condition and failed to verify that the file owner matches the user running the Driver. This could allow a local attacker with write access to the configuration file or the directory containing it to overwrite the configuration and gain control over logging level and output location. This issue has been patched in version 2.0.4. | ||||
| CVE-2024-45565 | 1 Qualcomm | 8 Sdm429w, Sdm429w Firmware, Snapdragon 429 Mobile and 5 more | 2025-05-09 | 7.8 High |
| Memory corruption when blob structure is modified by user-space after kernel verification. | ||||
| CVE-2024-21371 | 1 Microsoft | 13 Windows 10 1507, Windows 10 1607, Windows 10 1809 and 10 more | 2025-05-09 | 7 High |
| Windows Kernel Elevation of Privilege Vulnerability | ||||
| CVE-2022-45809 | 1 Quicoto | 1 Thumbs Rating | 2025-05-07 | 5.3 Medium |
| Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability in Ricard Torres Thumbs Rating.This issue affects Thumbs Rating: from n/a through 5.0.0. | ||||
| CVE-2024-24993 | 1 Ivanti | 1 Avalanche | 2025-05-06 | 7.5 High |
| A Race Condition (TOCTOU) vulnerability in web component of Ivanti Avalanche before 6.4.3 allows a remote authenticated attacker to execute arbitrary commands as SYSTEM. | ||||
| CVE-2024-24995 | 1 Ivanti | 1 Avalanche | 2025-05-06 | 7.5 High |
| A Race Condition (TOCTOU) vulnerability in web component of Ivanti Avalanche before 6.4.3 allows a remote authenticated attacker to execute arbitrary commands as SYSTEM. | ||||
| CVE-2022-32953 | 1 Insyde | 1 Insydeh2o | 2025-05-05 | 7 High |
| An issue was discovered in Insyde InsydeH2O with kernel 5.0 through 5.5. DMA attacks on the SdHostDriver buffer used by SMM and non-SMM code could cause TOCTOU race-condition issues that could lead to corruption of SMRAM and escalation of privileges. This attack can be mitigated by using IOMMU protection for the ACPI runtime memory used for the command buffer. This attack can be mitigated by copying the link data to SMRAM before checking it and verifying that all pointers are within the buffer. | ||||
| CVE-2022-32477 | 1 Insyde | 1 Insydeh2o | 2025-05-05 | 7 High |
| An issue was discovered in Insyde InsydeH2O with kernel 5.0 through 5.5. DMA attacks on the FvbServicesRuntimeDxe shared buffer used by SMM and non-SMM code could cause TOCTOU race-condition issues that could lead to corruption of SMRAM and escalation of privileges. This attack can be mitigated using IOMMU protection for the ACPI runtime memory used for the command buffer. This attack can be mitigated by copying the firmware block services data to SMRAM before checking it. | ||||
| CVE-2022-32475 | 1 Insyde | 1 Insydeh2o | 2025-05-05 | 7 High |
| An issue was discovered in Insyde InsydeH2O with kernel 5.0 through 5.5. DMA attacks on the VariableRuntimeDxe shared buffer used by SMM and non-SMM code could cause TOCTOU race-condition issues that could lead to corruption of SMRAM and escalation of privileges. This issue was fixed in the kernel, which also protected chipset and OEM chipset code. | ||||
| CVE-2022-32471 | 1 Insyde | 1 Insydeh2o | 2025-05-05 | 7 High |
| An issue was discovered in IhisiSmm in Insyde InsydeH2O with kernel 5.0 through 5.5. The IhisiDxe driver uses the command buffer to pass input and output data. By modifying the command buffer contents with DMA after the input parameters have been checked but before they are used, the IHISI SMM code may be convinced to modify SMRAM or OS, leading to possible data corruption or escalation of privileges. | ||||
| CVE-2022-32470 | 1 Insyde | 1 Insydeh2o | 2025-05-05 | 7 High |
| An issue was discovered in Insyde InsydeH2O with kernel 5.0 through 5.5. DMA attacks on the FwBlockServiceSmm shared buffer used by SMM and non-SMM code could cause TOCTOU race-condition issues that could lead to corruption of SMRAM and escalation of privileges. This attack can be mitigated using IOMMU protection for the ACPI runtime memory used for the command buffer. This attack can be mitigated by copying the firmware block services data to SMRAM before checking it. | ||||
| CVE-2022-32469 | 1 Insyde | 1 Insydeh2o | 2025-05-05 | 7 High |
| An issue was discovered in Insyde InsydeH2O with kernel 5.0 through 5.5. DMA attacks on the PnpSmm shared buffer used by SMM and non-SMM code could cause TOCTOU race-condition issues that could lead to corruption of SMRAM and escalation of privileges. This attack can be mitigated using IOMMU protection for the ACPI runtime memory used for the command buffer. This attack can be mitigated by copying the firmware block services data to SMRAM before checking it. | ||||
| CVE-2020-13162 | 1 Pulsesecure | 2 Pulse Secure Desktop Client, Pulse Secure Installer Service | 2025-05-05 | 7 High |
| A time-of-check time-of-use vulnerability in PulseSecureService.exe in Pulse Secure Client versions prior to 9.1.6 down to 5.3 R70 for Windows (which runs as NT AUTHORITY/SYSTEM) allows unprivileged users to run a Microsoft Installer executable with elevated privileges. | ||||
| CVE-2021-46853 | 1 Alpine Project | 1 Alpine | 2025-05-05 | 5.9 Medium |
| Alpine before 2.25 allows remote attackers to cause a denial of service (application crash) when LIST or LSUB is sent before STARTTLS. | ||||
| CVE-2024-49998 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: improve shutdown sequence Alexander Sverdlin presents 2 problems during shutdown with the lan9303 driver. One is specific to lan9303 and the other just happens to reproduce there. The first problem is that lan9303 is unique among DSA drivers in that it calls dev_get_drvdata() at "arbitrary runtime" (not probe, not shutdown, not remove): phy_state_machine() -> ... -> dsa_user_phy_read() -> ds->ops->phy_read() -> lan9303_phy_read() -> chip->ops->phy_read() -> lan9303_mdio_phy_read() -> dev_get_drvdata() But we never stop the phy_state_machine(), so it may continue to run after dsa_switch_shutdown(). Our common pattern in all DSA drivers is to set drvdata to NULL to suppress the remove() method that may come afterwards. But in this case it will result in an NPD. The second problem is that the way in which we set dp->conduit->dsa_ptr = NULL; is concurrent with receive packet processing. dsa_switch_rcv() checks once whether dev->dsa_ptr is NULL, but afterwards, rather than continuing to use that non-NULL value, dev->dsa_ptr is dereferenced again and again without NULL checks: dsa_conduit_find_user() and many other places. In between dereferences, there is no locking to ensure that what was valid once continues to be valid. Both problems have the common aspect that closing the conduit interface solves them. In the first case, dev_close(conduit) triggers the NETDEV_GOING_DOWN event in dsa_user_netdevice_event() which closes user ports as well. dsa_port_disable_rt() calls phylink_stop(), which synchronously stops the phylink state machine, and ds->ops->phy_read() will thus no longer call into the driver after this point. In the second case, dev_close(conduit) should do this, as per Documentation/networking/driver.rst: | Quiescence | ---------- | | After the ndo_stop routine has been called, the hardware must | not receive or transmit any data. All in flight packets must | be aborted. If necessary, poll or wait for completion of | any reset commands. So it should be sufficient to ensure that later, when we zeroize conduit->dsa_ptr, there will be no concurrent dsa_switch_rcv() call on this conduit. The addition of the netif_device_detach() function is to ensure that ioctls, rtnetlinks and ethtool requests on the user ports no longer propagate down to the driver - we're no longer prepared to handle them. The race condition actually did not exist when commit 0650bf52b31f ("net: dsa: be compatible with masters which unregister on shutdown") first introduced dsa_switch_shutdown(). It was created later, when we stopped unregistering the user interfaces from a bad spot, and we just replaced that sequence with a racy zeroization of conduit->dsa_ptr (one which doesn't ensure that the interfaces aren't up). | ||||
| CVE-2024-46678 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bonding: change ipsec_lock from spin lock to mutex In the cited commit, bond->ipsec_lock is added to protect ipsec_list, hence xdo_dev_state_add and xdo_dev_state_delete are called inside this lock. As ipsec_lock is a spin lock and such xfrmdev ops may sleep, "scheduling while atomic" will be triggered when changing bond's active slave. [ 101.055189] BUG: scheduling while atomic: bash/902/0x00000200 [ 101.055726] Modules linked in: [ 101.058211] CPU: 3 PID: 902 Comm: bash Not tainted 6.9.0-rc4+ #1 [ 101.058760] Hardware name: [ 101.059434] Call Trace: [ 101.059436] <TASK> [ 101.060873] dump_stack_lvl+0x51/0x60 [ 101.061275] __schedule_bug+0x4e/0x60 [ 101.061682] __schedule+0x612/0x7c0 [ 101.062078] ? __mod_timer+0x25c/0x370 [ 101.062486] schedule+0x25/0xd0 [ 101.062845] schedule_timeout+0x77/0xf0 [ 101.063265] ? asm_common_interrupt+0x22/0x40 [ 101.063724] ? __bpf_trace_itimer_state+0x10/0x10 [ 101.064215] __wait_for_common+0x87/0x190 [ 101.064648] ? usleep_range_state+0x90/0x90 [ 101.065091] cmd_exec+0x437/0xb20 [mlx5_core] [ 101.065569] mlx5_cmd_do+0x1e/0x40 [mlx5_core] [ 101.066051] mlx5_cmd_exec+0x18/0x30 [mlx5_core] [ 101.066552] mlx5_crypto_create_dek_key+0xea/0x120 [mlx5_core] [ 101.067163] ? bonding_sysfs_store_option+0x4d/0x80 [bonding] [ 101.067738] ? kmalloc_trace+0x4d/0x350 [ 101.068156] mlx5_ipsec_create_sa_ctx+0x33/0x100 [mlx5_core] [ 101.068747] mlx5e_xfrm_add_state+0x47b/0xaa0 [mlx5_core] [ 101.069312] bond_change_active_slave+0x392/0x900 [bonding] [ 101.069868] bond_option_active_slave_set+0x1c2/0x240 [bonding] [ 101.070454] __bond_opt_set+0xa6/0x430 [bonding] [ 101.070935] __bond_opt_set_notify+0x2f/0x90 [bonding] [ 101.071453] bond_opt_tryset_rtnl+0x72/0xb0 [bonding] [ 101.071965] bonding_sysfs_store_option+0x4d/0x80 [bonding] [ 101.072567] kernfs_fop_write_iter+0x10c/0x1a0 [ 101.073033] vfs_write+0x2d8/0x400 [ 101.073416] ? alloc_fd+0x48/0x180 [ 101.073798] ksys_write+0x5f/0xe0 [ 101.074175] do_syscall_64+0x52/0x110 [ 101.074576] entry_SYSCALL_64_after_hwframe+0x4b/0x53 As bond_ipsec_add_sa_all and bond_ipsec_del_sa_all are only called from bond_change_active_slave, which requires holding the RTNL lock. And bond_ipsec_add_sa and bond_ipsec_del_sa are xfrm state xdo_dev_state_add and xdo_dev_state_delete APIs, which are in user context. So ipsec_lock doesn't have to be spin lock, change it to mutex, and thus the above issue can be resolved. | ||||