Filtered by vendor Gstreamer
Subscriptions
Total
124 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-47613 | 2 Gstreamer, Redhat | 7 Gstreamer, Enterprise Linux, Rhel Aus and 4 more | 2026-03-17 | 9.8 Critical |
| GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been identified in `gst_gdk_pixbuf_dec_flush` within `gstgdkpixbufdec.c`. This function invokes `memcpy`, using `out_pix` as the destination address. `out_pix` is expected to point to the frame 0 from the frame structure, which is read from the input file. However, in certain situations, it can points to a NULL frame, causing the subsequent call to `memcpy` to attempt writing to the null address (0x00), leading to a null pointer dereference. This vulnerability can result in a Denial of Service (DoS) by triggering a segmentation fault (SEGV). This vulnerability is fixed in 1.24.10. | ||||
| CVE-2024-47615 | 2 Gstreamer, Redhat | 7 Gstreamer, Enterprise Linux, Rhel Aus and 4 more | 2026-03-17 | 9.8 Critical |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-Write has been detected in the function gst_parse_vorbis_setup_packet within vorbis_parse.c. The integer size is read from the input file without proper validation. As a result, size can exceed the fixed size of the pad->vorbis_mode_sizes array (which size is 256). When this happens, the for loop overwrites the entire pad structure with 0s and 1s, affecting adjacent memory as well. This OOB-write can overwrite up to 380 bytes of memory beyond the boundaries of the pad->vorbis_mode_sizes array. This vulnerability is fixed in 1.24.10. | ||||
| CVE-2023-40475 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-03-17 | 8.8 High |
| GStreamer MXF File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of MXF video files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. . Was ZDI-CAN-21661. | ||||
| CVE-2016-9445 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-03-17 | 7.5 High |
| Integer overflow in the vmnc decoder in the gstreamer allows remote attackers to cause a denial of service (crash) via large width and height values, which triggers a buffer overflow. | ||||
| CVE-2016-9446 | 3 Fedoraproject, Gstreamer, Redhat | 9 Fedora, Gstreamer, Enterprise Linux and 6 more | 2026-03-17 | 7.5 High |
| The vmnc decoder in the gstreamer does not initialize the render canvas, which allows remote attackers to obtain sensitive information as demonstrated by thumbnailing a simple 1 frame vmnc movie that does not draw to the allocated render canvas. | ||||
| CVE-2024-47541 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-03-17 | 7.5 High |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-write vulnerability has been identified in the gst_ssa_parse_remove_override_codes function of the gstssaparse.c file. This function is responsible for parsing and removing SSA (SubStation Alpha) style override codes, which are enclosed in curly brackets ({}). The issue arises when a closing curly bracket "}" appears before an opening curly bracket "{" in the input string. In this case, memmove() incorrectly duplicates a substring. With each successive loop iteration, the size passed to memmove() becomes progressively larger (strlen(end+1)), leading to a write beyond the allocated memory bounds. This vulnerability is fixed in 1.24.10. | ||||
| CVE-2024-47542 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-03-17 | 7.5 High |
| GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference has been discovered in the id3v2_read_synch_uint function, located in id3v2.c. If id3v2_read_synch_uint is called with a null work->hdr.frame_data, the pointer guint8 *data is accessed without validation, resulting in a null pointer dereference. This vulnerability can result in a Denial of Service (DoS) by triggering a segmentation fault (SEGV). This vulnerability is fixed in 1.24.10. | ||||
| CVE-2024-47543 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-03-17 | 7.5 High |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been discovered in qtdemux_parse_container function within qtdemux.c. In the parent function qtdemux_parse_node, the value of length is not well checked. So, if length is big enough, it causes the pointer end to point beyond the boundaries of buffer. Subsequently, in the qtdemux_parse_container function, the while loop can trigger an OOB-read, accessing memory beyond the bounds of buf. This vulnerability can result in reading up to 4GB of process memory or potentially causing a segmentation fault (SEGV) when accessing invalid memory. This vulnerability is fixed in 1.24.10. | ||||
| CVE-2024-47596 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-03-17 | 7.5 High |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read has been discovered in the qtdemux_parse_svq3_stsd_data function within qtdemux.c. In the FOURCC_SMI_ case, seqh_size is read from the input file without proper validation. If seqh_size is greater than the remaining size of the data buffer, it can lead to an OOB-read in the following call to gst_buffer_fill, which internally uses memcpy. This vulnerability can result in reading up to 4GB of process memory or potentially causing a segmentation fault (SEGV) when accessing invalid memory. This vulnerability is fixed in 1.24.10. | ||||
| CVE-2024-47597 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-03-17 | 9.1 Critical |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read has been detected in the function qtdemux_parse_samples within qtdemux.c. This issue arises when the function qtdemux_parse_samples reads data beyond the boundaries of the stream->stco buffer. The following code snippet shows the call to qt_atom_parser_get_offset_unchecked, which leads to the OOB-read when parsing the provided GHSL-2024-245_crash1.mp4 file. This issue may lead to read up to 8 bytes out-of-bounds. This vulnerability is fixed in 1.24.10. | ||||
| CVE-2024-47598 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-03-17 | 9.1 Critical |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been discovered in the qtdemux_merge_sample_table function within qtdemux.c. The problem is that the size of the stts buffer isn’t properly checked before reading stts_duration, allowing the program to read 4 bytes beyond the boundaries of stts->data. This vulnerability reads up to 4 bytes past the allocated bounds of the stts array. This vulnerability is fixed in 1.24.10. | ||||
| CVE-2024-47600 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-03-17 | 9.1 Critical |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been detected in the format_channel_mask function in gst-discoverer.c. The vulnerability affects the local array position, which is defined with a fixed size of 64 elements. However, the function gst_discoverer_audio_info_get_channels may return a guint channels value greater than 64. This causes the for loop to attempt access beyond the bounds of the position array, resulting in an OOB-read when an index greater than 63 is used. This vulnerability can result in reading unintended bytes from the stack. Additionally, the dereference of value->value_nick after the OOB-read can lead to further memory corruption or undefined behavior. This vulnerability is fixed in 1.24.10. | ||||
| CVE-2024-47602 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-03-17 | 7.5 High |
| GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been discovered in the gst_matroska_demux_add_wvpk_header function within matroska-demux.c. This function does not properly check the validity of the stream->codec_priv pointer in the following code. If stream->codec_priv is NULL, the call to GST_READ_UINT16_LE will attempt to dereference a null pointer, leading to a crash of the application. This vulnerability is fixed in 1.24.10. | ||||
| CVE-2016-9808 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2025-04-20 | N/A |
| The FLIC decoder in GStreamer before 1.10.2 allows remote attackers to cause a denial of service (out-of-bounds write and crash) via a crafted series of skip and count pairs. | ||||
| CVE-2016-9634 | 3 Debian, Gstreamer, Redhat | 7 Debian Linux, Gstreamer, Enterprise Linux and 4 more | 2025-04-20 | N/A |
| Heap-based buffer overflow in the flx_decode_delta_fli function in gst/flx/gstflxdec.c in the FLIC decoder in GStreamer before 1.10.2 allows remote attackers to execute arbitrary code or cause a denial of service (application crash) via the start_line parameter. | ||||
| CVE-2016-9813 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2025-04-20 | N/A |
| The _parse_pat function in the mpegts parser in GStreamer before 1.10.2 allows remote attackers to cause a denial of service (NULL pointer dereference and crash) via a crafted file. | ||||
| CVE-2016-9807 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2025-04-20 | N/A |
| The flx_decode_chunks function in gst/flx/gstflxdec.c in GStreamer before 1.10.2 allows remote attackers to cause a denial of service (invalid memory read and crash) via a crafted FLIC file. | ||||
| CVE-2016-9812 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2025-04-20 | N/A |
| The gst_mpegts_section_new function in the mpegts decoder in GStreamer before 1.10.2 allows remote attackers to cause a denial of service (out-of-bounds read) via a too small section. | ||||
| CVE-2016-9810 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2025-04-20 | N/A |
| The gst_decode_chain_free_internal function in the flxdex decoder in gst-plugins-good in GStreamer before 1.10.2 allows remote attackers to cause a denial of service (invalid memory read and crash) via an invalid file, which triggers an incorrect unref call. | ||||
| CVE-2016-9635 | 3 Debian, Gstreamer, Redhat | 7 Debian Linux, Gstreamer, Enterprise Linux and 4 more | 2025-04-20 | N/A |
| Heap-based buffer overflow in the flx_decode_delta_fli function in gst/flx/gstflxdec.c in the FLIC decoder in GStreamer before 1.10.2 allows remote attackers to execute arbitrary code or cause a denial of service (application crash) by providing a 'skip count' that goes beyond initialized buffer. | ||||