Filtered by vendor Linux
Subscriptions
Filtered by product Linux
Subscriptions
Total
444 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99132 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: don't hold buffer locks across sync transaction commit in xfs_sync_sb_buf xfs_sync_sb_buf() holds sb/rtsb buffer locks across a synchronous xfs_trans_commit(), which flushes the CIL push workqueue internally. If shutdown occurs during the CIL push, xfs_buf_item_unpin() needs to lock these buffers to fail them, causing a deadlock: setlabel: holds buf lock -> flush_workqueue(xfs-cil) CIL push worker: xfs_buf_item_unpin -> xfs_buf_lock(same buf) Remove the xfs_trans_bhold() calls so that commit releases the buffer locks normally. After the sync commit, re-acquire the buffers via mp->m_sb_bp / mp->m_rtsb_bp for the on-disk writeback. | ||||
| CVE-2026-99134 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mac802154: fix data race and NULL deref on local->assoc_dev local->assoc_dev is shared between the association path and the association-response worker without common synchronization. mac802154_perform_association() stores the coordinator pointer and waits for a response. Its timeout and error paths clear the pointer and return to mac802154_associate(), which may then free the coordinator object. Meanwhile, mac802154_rx_mac_cmd_worker() may observe the associating bit and enter mac802154_process_association_resp(), which dereferences assoc_dev. The worker's bit test and the handler's pointer dereference are not atomic with respect to cleanup. Cleanup can clear assoc_dev between them, causing a NULL dereference, or free the coordinator while the response handler still uses the pointer. The recorded result is exposed to the same window. assoc_status and assoc_addr are written by the handler but read by the association path while the associating bit is still set, so a second response for the same request - a malicious one, for instance - can replace them between those reads and leave the caller with an incoherent status and address pair. The response handler only needs the coordinator extended address. Replace assoc_dev with a cached address, removing the pointer lifetime dependency. Protect the cached address and the associating bit with a dedicated spinlock. A READ_ONCE()/WRITE_ONCE() pair would not guarantee an atomic __le64 access on all 32-bit architectures. wpan_dev->association_lock cannot be reused here: nl802154_associate() holds it across rdev_associate(), hence for the whole of mac802154_perform_association() including the wait for the response. A response handler taking that lock would only get it once the association has already given up. Reset the completion, publish the cached address, and set the associating bit while holding the lock. The response handler takes the lock, rechecks the bit and the cached address, records the response, clears the bit, and only then completes the waiter. Thus cleanup cannot pass the handler between its state check and completion, and the cached 64-bit value cannot tear. The handler clears the bit before completing, not the woken waiter: otherwise complete() is issued under the lock and a second (e.g. malicious) response can reacquire it before the waiter and replace the result. So a wait that returns success implies the bit is already clear, and the success and negative-response paths return directly. The transmit-error and timeout paths still clear it under assoc_lock, which serializes any racing response against the cleanup while the call returns the error it already selected. Both paths snapshot assoc_status and assoc_addr under the same lock. Both users run in process context, so a plain spinlock is sufficient. The lock is not held while waiting for the completion. | ||||
| CVE-2026-99138 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tcp: fix use-after-free in do_tcp_getsockopt(TCP_CC_INFO) do_tcp_getsockopt() reads icsk->icsk_ca_ops and dereferences the get_info function pointer without rcu_read_lock(). With BPF struct_ops congestion control, ca_ops can point to dynamically allocated memory that is freed concurrently, resulting in a use-after-free when the kernel dereferences or calls through the stale pointer. BUG: KASAN: slab-use-after-free in do_tcp_getsockopt+0x2037/0x23e0 Read of size 8 at addr ffff888013701258 by task exploit/149 do_tcp_getsockopt+0x2037/0x23e0 (net/ipv4/tcp.c:4564) tcp_getsockopt+0x91/0xf0 __sys_getsockopt+0xf7/0x170 Fix this by wrapping the ca_ops load and get_info call within rcu_read_lock()/rcu_read_unlock(), and using READ_ONCE() to load the icsk_ca_ops pointer. | ||||
| CVE-2026-99139 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tcp: fix use-after-free in do_tcp_getsockopt(TCP_CONGESTION) do_tcp_getsockopt() reads icsk->icsk_ca_ops->name without holding rcu_read_lock(). Since commit 0baf26b0fcd7 ("bpf: tcp: Support tcp_congestion_ops in bpf"), icsk_ca_ops can point to dynamically allocated BPF struct_ops memory that may be freed concurrently via setsockopt(TCP_CONGESTION), leading to a use-after-free. BUG: KASAN: slab-use-after-free in _copy_to_user+0x37/0x60 Read of size 16 at addr ffff888013505260 by task exploit/149 _copy_to_user+0x37/0x60 do_tcp_getsockopt+0x158a/0x2460 (net/ipv4/tcp.c:4585) tcp_getsockopt+0x91/0xf0 __sys_getsockopt+0xf7/0x170 Fix this by holding rcu_read_lock() around the ca_ops->name access, using READ_ONCE() to load icsk_ca_ops, and copying the name to a stack buffer before releasing the lock. Also annotate the relevant icsk_ca_ops stores with WRITE_ONCE() to fix the accompanying KCSAN data-race issue. | ||||
| CVE-2026-99105 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix stall when a task enqueued with SCX_ENQ_LAST lands back on its CPU's local DSQ With SCX_OPS_ENQ_LAST, the last runnable task on a CPU is passed to ops.enqueue() instead of being kept running. Exiting tasks without SCX_OPS_ENQ_EXITING, migration disabled tasks without SCX_OPS_ENQ_MIGRATION_DISABLED and tasks on an offline rq skip ops.enqueue() and go straight to the local DSQ. This happens in put_prev_task_scx() after the pick has settled on idle, so nothing reschedules the CPU, which idles with the task queued until an unrelated wakeup lands on it or the watchdog fires. scx_mitosis, which sets SCX_OPS_ENQ_LAST without SCX_OPS_ENQ_EXITING, hit this during mass cgroup teardown: exiting tasks stuck in exit_mmap() for over 40 seconds. A task put on the local DSQ runs, as anywhere else. If the SCX_ENQ_LAST enqueue left the task on this CPU's local DSQ, set need_resched on the task being switched in, as proxy_resched_idle() does. resched_curr() would flag the task being put instead, and __schedule() clears that right after the pick. | ||||
| CVE-2026-99110 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix heap overflow in cifs_do_set_acl() cifs_set_acl() validates ACL size using posix_acl_xattr_size(): 4 + (count * 8) // 4-byte header + 8 bytes per ACE cifs_do_set_acl() then calls posix_acl_to_cifs() to write the CIFS wire format into the same buffer: 6 + (count * 10) // 6-byte header + 10 bytes per ACE An ACL that passes the xattr-based check in cifs_set_acl() can overflow the heap when posix_acl_to_cifs() writes the larger CIFS format. Validate the CIFS format size against the remaining buffer space and USHRT_MAX before converting--data_count is __u16, so sizes above USHRT_MAX truncate the on-wire packet length, causing the server to apply a partial ACL. Replace MaxDataCount = 1000 with min(CIFSMaxBufSize, USHRT_MAX). | ||||
| CVE-2026-99118 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/dmc: Harden DMC firmware payload parsing Validate the conversion of the DMC firmware size from dwords to bytes using check_mul_overflow() before calculating the firmware payload size. Reject zero-length payloads and zero MMIO counts in the DMC firmware header so malformed firmware is caught early. Also set dmc_fw_size only after the payload allocation succeeds. (cherry picked from commit efde6601a1f1daedfe3dcc2816c934ddb44e3eef) | ||||
| CVE-2026-99120 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Cope with the SS bit being set in #NPF exit codes When running Hyper-V from Windows 11, KVM is seeing the SS bit set in nested page fault error codes produced for shadowed NPT. The AMD manual is unclear about when SS is set, including whether it can be set when SupervisorShadowStackEn (bit 6) is not set in the MISC_CTL field of the VMCB. Nevertheless, the unexpected SS bit causes out of bounds accesses in permission_fault(), seen as either WARNs or UBSAN reports: kernel: UBSAN: array-index-out-of-bounds in arch/x86/kvm/mmu.h:225:27 kernel: index 34 is out of range for type 'u16 [16]' (in this case, the page fault error code is 34*2=0x44, i.e. SS|U; the report shows SS|U|W happening as well). Fix the handling of unknown error codes by dropping SS and (with a WARN) any bits not among those that permission_fault() expects to receive. At the same time, given the uncertainty about when hardware sets SS, follow the processor's behavior when constructing the fault's error code, and preserve the SS bit as passed to FNAME(walk_addr_generic). While the behavior is surprising, there's a possibility that Hyper-V expects it (Hyper-V does not even enable CET unless it finds MBEC/GMET!), so retain the information when reflecting the fault to L1 instead of unconditionally discarding it. Bisection shows that this started happening with commit 687ee95c1b6d ("KVM: nSVM: enable GMET for guests"), even though SHSTK was available to guests since Linux 6.18. However, this is not because bit 1 of MISC_CTL (GMET) somehow enables reporting the SS bit; rather, it's simply that Hyper-V never uses CET unless GMET is also present. The WARN is reproducible even with gmet=0, with some hacking of kvm-unit-tests's cet.c testcase to ensure that the first access to the shadow stack triggers a page fault. | ||||
| CVE-2026-99122 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vsock/vmci: validate packet source for connected sockets vmci_transport_recv_stream_cb() looks up sockets first by the full source and destination tuple, then by destination only in the bound table. The fallback can select a non-listening socket without checking whether the packet came from its stored peer. This was reproduced with two VMCI contexts. A RST from the context not stored in a TCP_SYN_SENT socket reset that socket after it was selected by the destination-only lookup. VMCI can process notification packets in bottom-half context when the socket is not owned by user context, or defer packets to a workqueue. Use vsock_check_source() after taking the socket lock in the bottom-half path, and recheck after lock_sock() in the workqueue path. Listening sockets continue to accept packets from any source. Reply with a RST addressed from the received packet before dropping a source that fails validation. This preserves the existing reset behavior for bound non-listening and concurrently closed sockets without directing the reset to a connected socket's stored peer. | ||||
| CVE-2026-99125 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/pai: Handle multiple PMU stop callback invocations Handle the following scenario: The kernel protects itself against a very high sampling load and throttles the sampling using: perf_event_throttle() --> PMU->stop() Shortly later the scheduler may terminate the task and removes it from the CPU. It again calls PMU->stop() which results in two invocations of PMU->stop() called back to back. Protect against this and check the PERF_HES_STOPPED bit on function entry. If it is already set return. Clear bit PERF_HES_STOPPED in PMU->start(). Prohibit ioctl(fd, PERF_EVENT_IOC_PERIOD, ...) call for this event. It sets perf_event::event_limit to a positive value and causes perf_event_overflow() to invoke pai_stop() call back function when perf_event::event_limit hits zero. This is not supported because the sample events CRYPTO_ALL and NNPA_ALL are only taken at schedule out of a task. Use list_for_each_entry_safe() for safe iteration over syswide_list in pai_have_samples(). | ||||
| CVE-2026-99104 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix the bypass dispatch claim for schedulers bypassed by an ancestor scx_bypass() claims bypass dispatch when the scheduler's depth goes from zero to one and releases it when the depth returns to zero, but propagates only the depth to the descendants, not the claim. A descendant that starts bypassing with its ancestor never claims, and one whose own bypass ends under the ancestor's keeps its claim, as its depth does not return to zero. A sub-scheduler enable whose bypass ends under a PM suspend thus leaks its claim: the parent keeps hosting bypass dispatch and the sub-scheduler's next bypass trips the WARN_ON_ONCE() on the claim. A sub-scheduler disable that starts under a PM suspend has no claim, so once the resume lifts the root's bypass its tasks sit on the parent's bypass DSQs with nobody consuming them. Claim for every descendant whose depth goes from zero to one in the propagation and release every scheduler in the subtree whose depth returned to zero once the tasks have moved out of the bypass DSQs. A parent that is bypassing itself when a descendant claims consumes only its own bypass DSQs, empty until it leaves bypass and becomes the host. | ||||
| CVE-2026-99100 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: p54: validate firmware record lengths The p54 firmware parser accesses component ID and component version records without checking that their lengths cover the fields being read. A malformed record can therefore make the parser read past the record. Validate the component ID and component version record lengths before accessing their data. The descriptor record is also checked against the shortest descriptor length found in the supported firmware images. Reject descriptor values that underflow the RX offset or produce an empty RX range before updating the driver state. | ||||
| CVE-2026-99084 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: readdir: take no inode lock on an immutable directory iterate_dir() takes the directory's i_rwsem shared and holds it across ->iterate_shared(). For a directory that never has an entry and is never removed the lock keeps nothing still, it only orders every reader and every writer of that inode behind each other. For the directory of a nullfs instance that matters. The instance of the initial mount namespace is the root of every empty mount namespace and the private instance is the root of every kernel thread, so one inode is shared across users who have nothing else in common. And a reader can hold the lock for as long as it likes: back the getdents() buffer with a mapping of a file on a FUSE mount of your own, let the copy of "." and ".." fault and let the server wait. Queue an exclusive taker behind it, a mkdir() in that directory goes through start_dirop() before the read-only mount is reported, and from then on every lookup that misses the dcache in that directory, every create and every mount on it waits until the server answers. One user of an empty mount namespace stalls all the others. Add FOP_IMMUTABLE for the file operations of a directory that never changes and is never removed and let iterate_dir() skip the lock for it. The flag never changes for a file, ->f_pos is protected by f_pos_lock since directories are FMODE_ATOMIC_POS, IS_DEADDIR can't be set on such a directory and neither touch_atime() nor fsnotify take i_rwsem. Set it on the nullfs directory. The placeholder directories of libfs never have an entry either but their owners remove them, so they keep the lock. | ||||
| CVE-2026-99090 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: serialize vblank counter reads against GPU reset The vblank counter callback reads display registers and scanout position without holding reset_domain->sem. During GPU recovery, display commit work can call the callback while reset owns the semaphore for writing. The hardware access then triggers the lockdep_assert_held() in amdgpu_device_skip_hw_access() and sets TAINT_WARN when lockdep is enabled. Try to acquire the reset semaphore for reading before accessing the hardware, and hold it across the counter and scanout-position reads. If reset is already in progress, return DRM's cached software vblank count instead. This avoids blocking behind reset and avoids accessing display hardware while it is being reset. The cached count is less accurate than the hardware count, but is used only when reset prevents a safe hardware read. This addresses the reset-time warning from this vblank path; it does not suppress or fix unrelated lockdep warnings. (cherry picked from commit 51a4359f7431a4be5e42803c8bdaf7e0e5be2934) | ||||
| CVE-2026-99092 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 1.9 Low |
| In the Linux kernel, the following vulnerability has been resolved: riscv: patch: fix handling of bpf-jit execmem addresses Commit 8718e5a3090b ("riscv: patch: skip fixmap mapping when kernel text is already writable") gated the core_kernel_text() branch of patch_map() on CONFIG_STRICT_KERNEL_RWX, and explicitly left the vmalloc branch unchanged. That branch has a separate problem. That branch only creates a temporary writable fixmap alias when CONFIG_STRICT_MODULE_RWX is enabled, and otherwise assumes the target is directly writable and returns the address unchanged. That assumption no longer holds: bpf_prog_pack_alloc calls set_memory_rox() on every pack unconditionally in alloc_new_pack(), independently of any CONFIG_STRICT_*_RWX option, so BPF text in the vmalloc area is read-only regardless of what CONFIG_STRICT_MODULE_RWX says. With CONFIG_STRICT_MODULE_RWX=n, patch_map() returns the read-only address directly, the subsequent copy_to_kernel_nofault() takes a page fault and returns -EFAULT. bpf_arch_text_copy() turns that into -EINVAL, which propagates through bpf_jit_binary_pack_finalize() to the WARN_ON() in bpf_int_jit_compile() and leaves the program un-JITed. Note that BPF cannot be fixed the way kprobes was in commit bdc46e507b59 ("riscv: mm: make EXECMEM_KPROBES writable without CONFIG_STRICT_MODULE_RWX"). EXECMEM_BPF is already PAGE_KERNEL, i.e. writable at allocation time; the read-only mapping is established afterwards by generic code in alloc_new_pack(), which arch code cannot influence. The only place this can be handled is patch_map(). This is the same problem that was fixed on arm64 by commit b1480ed230ac ("arm64: patching: fix handling of execmem addresses"), and the fix is the same: CONFIG_EXECMEM is what actually tracks whether the vmalloc area can hold executable memory that needs a temporary alias to be written. CONFIG_BPF_JIT, CONFIG_KPROBES and CONFIG_MODULES all select it. Note that this is not limited to CONFIG_MODULES=n. Unlike arm64, riscv selects CONFIG_ARCH_OPTIONAL_KERNEL_RWX, so CONFIG_STRICT_MODULE_RWX can be disabled with CONFIG_MODULES=y as well, and the bug is reachable in that configuration too. The !CONFIG_MMU build is unaffected: it has its own __patch_insn_set() and __patch_insn_write() implementations and never calls patch_map(). | ||||
| CVE-2026-98908 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: net: microchip: sparx5: clean up PSFP resources on flower setup failure sparx5_tc_flower_psfp_setup() allocates PSFP stream gate, flow meter and stream filter resources before adding VCAP actions. If a later step fails, the resources allocated earlier in the function are not unwound. Add error paths to release the stream filter, flow meter and stream gate when setup fails after they have been acquired. Also make sparx5_psfp_fm_add() return the acquired flow-meter id before the existing-flow-meter early return. When an existing flow meter is reused, sparx5_psfp_fm_get() increments its pool reference count, but the caller previously kept psfp_fmid as 0. If a later setup step failed, the error path could try to delete flow-meter id 0 instead of the reused flow meter, leaving the incremented reference behind. | ||||
| CVE-2026-99061 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix P2P device removal race in brcmf_detach() When the driver is removed while the user space process that created the P2P device (e.g. wpa_supplicant) is still exiting, the P2P device interface is removed twice and the kernel crashes. The two paths are: - wpa_supplicant, on exit, sends NL80211_CMD_DEL_INTERFACE for the P2P device. nl80211_del_interface() holds RTNL and the wiphy mutex and calls brcmf_p2p_del_vif(), which disables discovery and waits up to 1.5 s for BRCMF_E_IF_DEL. Then it calls brcmf_remove_interface(), which unregisters the wdev and frees the vif and the ifp. - brcmf_detach() sets the bus down, so BRCMF_E_IF_DEL never arrives, and calls brcmf_remove_interface(ifp, false) for the same ifp. brcmf_p2p_ifp_removed() reads ifp->vif and then blocks on rtnl_lock(). When brcmf_p2p_del_vif() releases RTNL, it calls cfg80211_unregister_wdev() on the wdev that was already unregistered and freed. The second list_del_rcu() of wdev->list faults on LIST_POISON2: brcmfmac: brcmf_p2p_del_vif delete P2P vif brcmfmac: brcmf_p2p_deinit_discovery enter brcmfmac: brcmf_p2p_del_vif P2P: GO_NEG_PHASE status cleared brcmfmac: brcmf_detach Enter brcmfmac: brcmf_bus_change_state 1 -> 0 brcmfmac: brcmf_remove_interface Enter, bsscfgidx=1, ifidx=0 brcmfmac: brcmf_del_if Enter, bsscfgidx=1, ifidx=0 brcmfmac: brcmf_p2p_ifp_removed P2P: device interface removed [1.5 s later, brcmf_p2p_del_vif() timed out] brcmfmac: brcmf_remove_interface Enter, bsscfgidx=1, ifidx=0 brcmfmac: brcmf_del_if Enter, bsscfgidx=1, ifidx=0 brcmfmac: brcmf_p2p_ifp_removed P2P: device interface removed Unable to handle kernel paging request at virtual address dead000000000122 Internal error: Oops: 96000044 [#1] PREEMPT_RT SMP pc : _cfg80211_unregister_wdev+0x6c/0x264 [cfg80211] Call trace: _cfg80211_unregister_wdev+0x6c/0x264 [cfg80211] cfg80211_unregister_wdev+0x10/0x1c [cfg80211] brcmf_p2p_ifp_removed+0x84/0xb0 [brcmfmac] brcmf_remove_interface+0x1f4/0x254 [brcmfmac] brcmf_detach+0x88/0x180 [brcmfmac] brcmf_sdio_remove+0x90/0x7b0 [brcmfmac] brcmf_sdiod_remove+0x20/0xa0 [brcmfmac] brcmf_ops_sdio_remove+0xbc/0x12c [brcmfmac] sdio_bus_remove+0x38/0x144 device_release_driver_internal+0x1e8/0x2c0 device_release_driver+0x14/0x20 brcmf_sdio_bus_remove+0x2c/0x40 [brcmfmac] brcmf_fwvid_unregister_vendor+0xd8/0x170 [brcmfmac] __exit_compat+0x18/0x418 [brcmfmac_cyw] __arm64_sys_delete_module+0x1ac/0x244 The log was taken with debug=0x406 on an i.MX 8M Plus board with a CYW55513 (Sona IF513) on SDIO. The driver is the Ezurio backport of brcmfmac from v6.18.22 on a 5.4-rt kernel. The code involved is the same in mainline. To reproduce: 1. Start wpa_supplicant on wlan0 and let it associate. It creates the P2P device (iw dev shows "type P2P-device"). 2. Stop wpa_supplicant and remove the driver without waiting for wpa_supplicant to exit: kill $(pidof wpa_supplicant) rmmod brcmfmac_cyw brcmfmac The crash is reproducible on that board. For the interface without a netdev (the P2P device), take RTNL and the wiphy mutex in brcmf_detach() before reading iflist, and remove it with locked=true. If brcmf_p2p_del_vif() runs first, brcmf_detach() finds the slot empty. If brcmf_detach() runs first, nl80211 does not find the wdev any more. The interfaces with a netdev are removed as before, because brcmf_del_if() takes RTNL on its own for the primary interface. | ||||
| CVE-2026-99067 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 1.9 Low |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: scrub: fix local_root reference leak in scrub_print_warning_inode() When paths_from_inode() fails, scrub_print_warning_inode() jumps to err without dropping the reference taken by btrfs_get_fs_root(), leaking a reference to the root every time path resolution fails while printing scrub warnings. Every other error and success path of the function drops the reference. Drop the reference on the paths_from_inode() failure path too. | ||||
| CVE-2026-99086 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-integrity: validate the superblock on resume dm_integrity_resume() re-reads the superblock from the device so that it picks up the flags and the recalculate position. It performs no validation on the result, while the constructor validates the superblock it reads and sizes all the in-memory structures according to it. The user may modify the superblock on the underlying device while the dm-integrity device is suspended, so that the two no longer agree. In particular, access_journal_data() shifts the journal entry index by ic->sb->log2_sectors_per_block, while ic->journal_section_sectors and the journal page list were computed with the value that was present at constructor time. Increasing log2_sectors_per_block makes the index run past the end of the journal, and dm-integrity then writes 512 bytes through lowmem_page_address(NULL). Snapshot the validated superblock in the constructor and refuse to resume if any of the fields that describe the on-disk geometry changed. | ||||
| CVE-2026-98905 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Properly acquire queue buffers in CRIU restore When kfd_queue_acquire_buffers() was split off from set_queue_properties_from_user(), set_queue_properties_from_criu() was missed. Thus, set_queue_properties_from_criu() is not filling out the buffer fields of queue_properties, which can come up when subsequent code expects them to be non-null. Add the proper call to kfd_queue_acquire_buffers(), and also use the right cast types in set_queue_properties_from_criu() (which were missed at the same time) (cherry picked from commit 88ed96abbbe27b70193544fbc1ee06448c274714) | ||||