Total
13062 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-38636 | 1 Linux | 1 Linux Kernel | 2025-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: multidev: fix to recognize valid zero block address As reported by Yi Zhang in mailing list [1], kernel warning was catched during zbd/010 test as below: ./check zbd/010 zbd/010 (test gap zone support with F2FS) [failed] runtime ... 3.752s something found in dmesg: [ 4378.146781] run blktests zbd/010 at 2024-02-18 11:31:13 [ 4378.192349] null_blk: module loaded [ 4378.209860] null_blk: disk nullb0 created [ 4378.413285] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 4378.422334] scsi host15: scsi_debug: version 0191 [20210520] dev_size_mb=1024, opts=0x0, submit_queues=1, statistics=0 [ 4378.434922] scsi 15:0:0:0: Direct-Access-ZBC Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 4378.443343] scsi 15:0:0:0: Power-on or device reset occurred [ 4378.449371] sd 15:0:0:0: Attached scsi generic sg5 type 20 [ 4378.449418] sd 15:0:0:0: [sdf] Host-managed zoned block device ... (See '/mnt/tests/gitlab.com/api/v4/projects/19168116/repository/archive.zip/storage/blktests/blk/blktests/results/nodev/zbd/010.dmesg' WARNING: CPU: 22 PID: 44011 at fs/iomap/iter.c:51 CPU: 22 PID: 44011 Comm: fio Not tainted 6.8.0-rc3+ #1 RIP: 0010:iomap_iter+0x32b/0x350 Call Trace: <TASK> __iomap_dio_rw+0x1df/0x830 f2fs_file_read_iter+0x156/0x3d0 [f2fs] aio_read+0x138/0x210 io_submit_one+0x188/0x8c0 __x64_sys_io_submit+0x8c/0x1a0 do_syscall_64+0x86/0x170 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Shinichiro Kawasaki helps to analyse this issue and proposes a potential fixing patch in [2]. Quoted from reply of Shinichiro Kawasaki: "I confirmed that the trigger commit is dbf8e63f48af as Yi reported. I took a look in the commit, but it looks fine to me. So I thought the cause is not in the commit diff. I found the WARN is printed when the f2fs is set up with multiple devices, and read requests are mapped to the very first block of the second device in the direct read path. In this case, f2fs_map_blocks() and f2fs_map_blocks_cached() modify map->m_pblk as the physical block address from each block device. It becomes zero when it is mapped to the first block of the device. However, f2fs_iomap_begin() assumes that map->m_pblk is the physical block address of the whole f2fs, across the all block devices. It compares map->m_pblk against NULL_ADDR == 0, then go into the unexpected branch and sets the invalid iomap->length. The WARN catches the invalid iomap->length. This WARN is printed even for non-zoned block devices, by following steps. - Create two (non-zoned) null_blk devices memory backed with 128MB size each: nullb0 and nullb1. # mkfs.f2fs /dev/nullb0 -c /dev/nullb1 # mount -t f2fs /dev/nullb0 "${mount_dir}" # dd if=/dev/zero of="${mount_dir}/test.dat" bs=1M count=192 # dd if="${mount_dir}/test.dat" of=/dev/null bs=1M count=192 iflag=direct ..." So, the root cause of this issue is: when multi-devices feature is on, f2fs_map_blocks() may return zero blkaddr in non-primary device, which is a verified valid block address, however, f2fs_iomap_begin() treats it as an invalid block address, and then it triggers the warning in iomap framework code. Finally, as discussed, we decide to use a more simple and direct way that checking (map.m_flags & F2FS_MAP_MAPPED) condition instead of (map.m_pblk != NULL_ADDR) to fix this issue. Thanks a lot for the effort of Yi Zhang and Shinichiro Kawasaki on this issue. [1] https://lore.kernel.org/linux-f2fs-devel/CAHj4cs-kfojYC9i0G73PRkYzcxCTex=-vugRFeP40g_URGvnfQ@mail.gmail.com/ [2] https://lore.kernel.org/linux-f2fs-devel/gngdj77k4picagsfdtiaa7gpgnup6fsgwzsltx6milmhegmjff@iax2n4wvrqye/ | ||||
| CVE-2024-38626 | 1 Linux | 1 Linux Kernel | 2025-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fuse: clear FR_SENT when re-adding requests into pending list The following warning was reported by lee bruce: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 8264 at fs/fuse/dev.c:300 fuse_request_end+0x685/0x7e0 fs/fuse/dev.c:300 Modules linked in: CPU: 0 PID: 8264 Comm: ab2 Not tainted 6.9.0-rc7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:fuse_request_end+0x685/0x7e0 fs/fuse/dev.c:300 ...... Call Trace: <TASK> fuse_dev_do_read.constprop.0+0xd36/0x1dd0 fs/fuse/dev.c:1334 fuse_dev_read+0x166/0x200 fs/fuse/dev.c:1367 call_read_iter include/linux/fs.h:2104 [inline] new_sync_read fs/read_write.c:395 [inline] vfs_read+0x85b/0xba0 fs/read_write.c:476 ksys_read+0x12f/0x260 fs/read_write.c:619 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xce/0x260 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f ...... </TASK> The warning is due to the FUSE_NOTIFY_RESEND notify sent by the write() syscall in the reproducer program and it happens as follows: (1) calls fuse_dev_read() to read the INIT request The read succeeds. During the read, bit FR_SENT will be set on the request. (2) calls fuse_dev_write() to send an USE_NOTIFY_RESEND notify The resend notify will resend all processing requests, so the INIT request is moved from processing list to pending list again. (3) calls fuse_dev_read() with an invalid output address fuse_dev_read() will try to copy the same INIT request to the output address, but it will fail due to the invalid address, so the INIT request is ended and triggers the warning in fuse_request_end(). Fix it by clearing FR_SENT when re-adding requests into pending list. | ||||
| CVE-2024-40917 | 1 Linux | 1 Linux Kernel | 2025-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: memblock: make memblock_set_node() also warn about use of MAX_NUMNODES On an (old) x86 system with SRAT just covering space above 4Gb: ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0xfffffffff] hotplug the commit referenced below leads to this NUMA configuration no longer being refused by a CONFIG_NUMA=y kernel (previously NUMA: nodes only cover 6144MB of your 8185MB e820 RAM. Not used. No NUMA configuration found Faking a node at [mem 0x0000000000000000-0x000000027fffffff] was seen in the log directly after the message quoted above), because of memblock_validate_numa_coverage() checking for NUMA_NO_NODE (only). This in turn led to memblock_alloc_range_nid()'s warning about MAX_NUMNODES triggering, followed by a NULL deref in memmap_init() when trying to access node 64's (NODE_SHIFT=6) node data. To compensate said change, make memblock_set_node() warn on and adjust a passed in value of MAX_NUMNODES, just like various other functions already do. | ||||
| CVE-2025-5326 | 1 Zhilink | 1 Adp Application Developer Platform | 2025-10-03 | 6.3 Medium |
| A vulnerability was found in zhilink 智互联(深圳)科技有限公司 ADP Application Developer Platform 应用开发者平台 1.0.0 and classified as critical. Affected by this issue is some unknown functionality of the file /adpweb/wechat/verifyToken/. The manipulation leads to deserialization. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-2043 | 1 Pb-cms Project | 1 Pb-cms | 2025-10-03 | 4.7 Medium |
| A vulnerability was found in LinZhaoguan pb-cms 1.0.0 and classified as critical. This issue affects some unknown processing of the file /admin#themes of the component Add New Topic Handler. The manipulation of the argument Topic Key leads to deserialization. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2014-2346 | 1 Copadata | 2 Zenon Dnp3 Ng Driver, Zenon Dnp3 Process Gateway | 2025-10-02 | N/A |
| COPA-DATA zenon DNP3 NG driver (DNP3 master) 7.10 and 7.11 through 7.11 SP0 build 10238 and zenon DNP3 Process Gateway (DNP3 outstation) 7.11 SP0 build 10238 and earlier allow physically proximate attackers to cause a denial of service (infinite loop and process crash) via crafted input over a serial line. | ||||
| CVE-2014-2345 | 1 Copadata | 2 Zenon Dnp3 Ng Driver, Zenon Dnp3 Process Gateway | 2025-10-02 | N/A |
| COPA-DATA zenon DNP3 NG driver (DNP3 master) 7.10 and 7.11 through 7.11 SP0 build 10238 and zenon DNP3 Process Gateway (DNP3 outstation) 7.11 SP0 build 10238 and earlier allow remote attackers to cause a denial of service (infinite loop and process crash) by sending a crafted DNP3 packet over TCP. | ||||
| CVE-2014-2343 | 1 Trianglemicroworks | 1 Scada Data Gateway | 2025-10-02 | N/A |
| Triangle MicroWorks SCADA Data Gateway before 3.00.0635 allows physically proximate attackers to cause a denial of service (excessive data processing) via a crafted DNP request over a serial line. | ||||
| CVE-2014-2342 | 1 Trianglemicroworks | 1 Scada Data Gateway | 2025-10-02 | N/A |
| Triangle MicroWorks SCADA Data Gateway before 3.00.0635 allows remote attackers to cause a denial of service (excessive data processing) via a crafted DNP3 packet. | ||||
| CVE-2024-45431 | 1 Opensynergy | 1 Blue Sdk | 2025-10-02 | 5.3 Medium |
| OpenSynergy BlueSDK (aka Blue SDK) through 6.x has Improper Input Validation. The specific flaw exists within the BlueSDK Bluetooth stack. The issue results from the lack of proper validation of remote L2CAP channel ID (CID). An attacker can leverage this to create an L2CAP channel with the null identifier assigned as a remote CID. | ||||
| CVE-2025-11149 | 2 @nubosoftware/node-static Project, Node-static Project | 2 @nubosoftware/node-static, Node-static | 2025-10-02 | 7.5 High |
| This affects all versions of the package node-static; all versions of the package @nubosoftware/node-static. The package fails to catch an exception when user input includes null bytes. This allows attackers to access http://host/%00 and crash the server. | ||||
| CVE-2025-59940 | 2 Mkdocs, Mondeja | 2 Mkdocs, Mkdocs-include-markdown-plugin | 2025-10-02 | 6.5 Medium |
| mkdocs-include-markdown-plugin is an Mkdocs Markdown includer plugin. In versions 7.1.7 and below, there is a vulnerability where unvalidated input can collide with substitution placeholders. This issue is fixed in version 7.1.8. | ||||
| CVE-2025-10155 | 1 Mmaitre314 | 1 Picklescan | 2025-10-02 | 7.8 High |
| An Improper Input Validation vulnerability in the scanning logic of mmaitre314 picklescan versions up to and including 0.0.30 allows a remote attacker to bypass pickle files security checks by supplying a standard pickle file with a PyTorch-related file extension. When the pickle file incorrectly considered safe is loaded, it can lead to the execution of malicious code. | ||||
| CVE-2025-40836 | 1 Ericsson | 2 Indoor Connect 8855, Indoor Connect 8855 Firmware | 2025-10-02 | 9.8 Critical |
| Ericsson Indoor Connect 8855 contains an improper input validation vulnerability which if exploited can allow an attacker to execute commands with escalated privileges. | ||||
| CVE-2024-33659 | 1 Ami | 1 Aptio V | 2025-10-02 | 8.8 High |
| AMI APTIOV contains a vulnerability in BIOS where an attacker may cause an Improper Input Validation by a local attacker. Successful exploitation of these vulnerabilities may lead to overwriting arbitrary memory and execute arbitrary code at SMM level, also impacting Confidentiality, Integrity, and Availability. | ||||
| CVE-2024-53225 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Fix alignment failure at max_n_shift When configuring a kernel with PAGE_SIZE=4KB, depending on its setting of CONFIG_CMA_ALIGNMENT, VCMDQ_LOG2SIZE_MAX=19 could fail the alignment test and trigger a WARN_ON: WARNING: at drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c:3646 Call trace: arm_smmu_init_one_queue+0x15c/0x210 tegra241_cmdqv_init_structures+0x114/0x338 arm_smmu_device_probe+0xb48/0x1d90 Fix it by capping max_n_shift to CMDQ_MAX_SZ_SHIFT as SMMUv3 CMDQ does. | ||||
| CVE-2024-53094 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Add sendpage_ok() check to disable MSG_SPLICE_PAGES While running ISER over SIW, the initiator machine encounters a warning from skb_splice_from_iter() indicating that a slab page is being used in send_page. To address this, it is better to add a sendpage_ok() check within the driver itself, and if it returns 0, then MSG_SPLICE_PAGES flag should be disabled before entering the network stack. A similar issue has been discussed for NVMe in this thread: https://lore.kernel.org/all/20240530142417.146696-1-ofir.gal@volumez.com/ WARNING: CPU: 0 PID: 5342 at net/core/skbuff.c:7140 skb_splice_from_iter+0x173/0x320 Call Trace: tcp_sendmsg_locked+0x368/0xe40 siw_tx_hdt+0x695/0xa40 [siw] siw_qp_sq_process+0x102/0xb00 [siw] siw_sq_resume+0x39/0x110 [siw] siw_run_sq+0x74/0x160 [siw] kthread+0xd2/0x100 ret_from_fork+0x34/0x40 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2024-50092 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: net: netconsole: fix wrong warning A warning is triggered when there is insufficient space in the buffer for userdata. However, this is not an issue since userdata will be sent in the next iteration. Current warning message: ------------[ cut here ]------------ WARNING: CPU: 13 PID: 3013042 at drivers/net/netconsole.c:1122 write_ext_msg+0x3b6/0x3d0 ? write_ext_msg+0x3b6/0x3d0 console_flush_all+0x1e9/0x330 The code incorrectly issues a warning when this_chunk is zero, which is a valid scenario. The warning should only be triggered when this_chunk is negative. | ||||
| CVE-2025-21696 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: clear uffd-wp PTE/PMD state on mremap() When mremap()ing a memory region previously registered with userfaultfd as write-protected but without UFFD_FEATURE_EVENT_REMAP, an inconsistency in flag clearing leads to a mismatch between the vma flags (which have uffd-wp cleared) and the pte/pmd flags (which do not have uffd-wp cleared). This mismatch causes a subsequent mprotect(PROT_WRITE) to trigger a warning in page_table_check_pte_flags() due to setting the pte to writable while uffd-wp is still set. Fix this by always explicitly clearing the uffd-wp pte/pmd flags on any such mremap() so that the values are consistent with the existing clearing of VM_UFFD_WP. Be careful to clear the logical flag regardless of its physical form; a PTE bit, a swap PTE bit, or a PTE marker. Cover PTE, huge PMD and hugetlb paths. | ||||
| CVE-2024-58084 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: Fix missing read barrier in qcom_scm_get_tzmem_pool() Commit 2e4955167ec5 ("firmware: qcom: scm: Fix __scm and waitq completion variable initialization") introduced a write barrier in probe function to store global '__scm' variable. We all known barriers are paired (see memory-barriers.txt: "Note that write barriers should normally be paired with read or address-dependency barriers"), therefore accessing it from concurrent contexts requires read barrier. Previous commit added such barrier in qcom_scm_is_available(), so let's use that directly. Lack of this read barrier can result in fetching stale '__scm' variable value, NULL, and dereferencing it. Note that barrier in qcom_scm_is_available() satisfies here the control dependency. | ||||