Filtered by vendor Linux
Subscriptions
Filtered by product Linux Kernel
Subscriptions
Total
22560 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72444 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: flow_dissector: check device type before reading ETH_ADDRS __skb_flow_dissect() unconditionally reads 12 bytes from eth_hdr(skb) when FLOW_DISSECTOR_KEY_ETH_ADDRS is requested. This assumes the skb has a valid Ethernet header at mac_header, which is not always the case. The problem can be triggered by: 1. Creating a TUN device in L3 mode (IFF_TUN, hard_header_len=0) 2. Attaching a multiq qdisc with a flower filter matching on eth_src 3. Sending a packet through AF_PACKET Since TUN in L3 mode has no link-layer header, mac_header points to the L3 data area. The flow dissector reads 12 bytes of uninitialized skb memory, which then propagates through fl_set_masked_key() and is used as a rhashtable lookup key in __fl_lookup(), as reported by KMSAN. Rejecting the filter in the control path (at tc filter add time) is not feasible because TC filter blocks can be shared between arbitrary devices -- a filter installed on an Ethernet device may later classify packets on a headerless device through a shared block. The device association is not fixed at filter creation time. Fix this by gating the memcpy on dev->type == ARPHRD_ETHER, which ensures only true Ethernet-framed packets have their addresses read. This is more precise than the previous hard_header_len >= 12 check, which would incorrectly pass for non-Ethernet link types like IPoIB (ARPHRD_INFINIBAND, hard_header_len=24) and FDDI (hard_header_len=21) whose L2 headers are not in Ethernet format. Additionally check skb_mac_header_was_set() to guard against the pathological case where mac_header is the unset sentinel (~0U), which would cause eth_hdr() to return a wild pointer. For the act_mirred redirect case (Ethernet packet redirected to a non-Ethernet device sharing a TC block), zeroing the key is the correct behavior: the packet is now being classified on the target device, where Ethernet address matching is not semantically meaningful. Note: on non-Ethernet devices, the zeroed key will match a filter configured with all-zero MAC addresses. This is an improvement over the previous behavior where uninitialized memory could randomly match any filter. | ||||
| CVE-2026-74293 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl: fsl_audmix: Validate written enum values fsl_audmix_put_mix_clk_src() and fsl_audmix_put_out_src() convert the user-provided enum item with snd_soc_enum_item_to_val() before checking whether the item is within the enum's item count. The generic snd_soc_put_enum_double() helper performs that validation, but these callbacks use the converted value first: the clock-source path tests it with BIT(), and the output-source path indexes the prms transition table with it. Reject out-of-range enum items before converting them. | ||||
| CVE-2026-72483 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: host: max3421: Fix shift-out-of-bounds in max3421_hub_control() The `max3421_hub_control()` function handles USB hub class requests to the virtual root hub. In the `default` branches of both the `ClearPortFeature` and `SetPortFeature` switch statements, it modifies `max3421_hcd->port_status` by left shifting 1 by the request's `value` parameter. However, it does not validate whether this shift will exceed the width of `port_status`. So if a malicious userspace task with access to the root hub via /dev/bus/usb/.../001 issues a USBDEVFS_CONTROL ioctl with `wValue` greater than or equal to 32, the left shift operation invokes shift-out-of-bounds undefined behavior. This results in arbitrary bit corruption of `port_status`, including the normally-immutable change bits, which can bypass internal state checks and confuse the hub status. Fix this by rejecting requests whose `value` exceeds the shift width before performing the shift. This issue was found using a KLEE-based symbolic execution tool for kernel drivers that I'm currently developing. | ||||
| CVE-2026-74371 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: fix BPF_PROG_QUERY OOB write and cgroup backward compat BPF_PROG_QUERY writes back the 'query.revision' field unconditionally to userspace. If userspace passes a smaller 'bpf_attr' structure (e.g. 40 bytes, which was the layout before the addition of 'query.revision'), the kernel performs an out-of-bounds write. Fix this by propagating the user-provided attribute size 'uattr_size' down to the cgroup query handlers, and conditionally skipping writing the revision field to userspace when the provided buffer size is insufficient. query.revision in bpf_mprog_query is structurally identical to the cgroup case: a late tail field, written unconditionally. But the backward-compat hazard is not the same. The min-historical-size test is per command, and bpf_mprog_query only serves attach types that were born with revision in the struct: - tcx_prog_query -> BPF_TCX_INGRESS/EGRESS - netkit_prog_query -> BPF_NETKIT_PRIMARY/PEER tcx, netkit, the revision field, and bpf_mprog_query itself all landed in the same v6.6 merge window (053c8e1f235d added the mprog query API + revision; tcx in e420bed02507, netkit in 35dfaad7188c). There has never been a tcx/netkit BPF_PROG_QUERY userspace that doesn't know about revision. So for these commands the minimum legitimate struct already covers offset 56-64 — no old binary can be broken here. Contrast with cgroup: BPF_PROG_QUERY on cgroup attach types shipped in 2017; revision write-back was bolted on years later (120933984460). That path has a real population of pre-revision callers. | ||||
| CVE-2026-72454 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Fix race in i3c_hci_addr_to_dev() i3c_hci_addr_to_dev() walks bus->devs.i3c, which is protected by bus.lock (rwsem). However, it is invoked from the MIPI I3C HCI IRQ handler, which cannot take bus.lock. This allows concurrent device addition/removal in the I3C core to modify the list while it is being traversed, potentially leading to use-after-free or crashes. Remove the dependency on the bus device list and introduce a dedicated lookup table. Add an ibi_devs[] array indexed by DAT entry, maintained under hci->lock. Update the array when IBIs are enabled or disabled, so that it always reflects the set of devices allowed to generate IBIs. Also update when IBIs are freed, to cover the corner case when an IBI is freed without first being disabled (e.g. oldedev in i3c_master_add_i3c_dev_locked()). Move i3c_hci_addr_to_dev() into core.c, reimplement it using the new array, and add a lockdep assertion to enforce that hci->lock is held by callers. Demote a message in PIO and DMA IBI handling, from an error to a debug message, because there is a race window when the condition can arise normally. | ||||
| CVE-2026-72493 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.9 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: serialize netif_running() check in enqueue_to_backlog() Syzbot reported a KASAN slab-use-after-free in fib_rules_lookup(). The root cause is a race condition where packets can escape the backlog flushing during device unregistration (e.g., during netns exit). Commit e9e4dd3267d0 ("net: do not process device backlog during unregistration") introduced a lockless netif_running() check in enqueue_to_backlog() to prevent queuing packets to an unregistering device. However, this creates a TOCTOU race window. A lockless transmitter (like veth_xmit) can pass the check before dev_close() clears IFF_UP. If the transmitter is then delayed, flush_all_backlogs() can run and finish before the transmitter grabs the backlog lock and queues the packet. The packet then escapes the flush and triggers UAF later when processed. Fix this by moving the netif_running() check inside the backlog lock. This serializes the check with the flush work (which also grabs the lock). We then either queue the packet before the flush runs (so it gets flushed), or check netif_running() after the flush/close completes (so it gets dropped). | ||||
| CVE-2026-74255 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix UAF in tipc_l2_send_msg() Syzbot reported a slab-use-after-free in ipvlan_hard_header() when called from tipc_l2_send_msg(). The root cause is that tipc_disable_l2_media() calls synchronize_net() while b->media_ptr is still valid. This allows concurrent RCU readers to obtain the device pointer after synchronize_net() has finished. The pointer is cleared later in bearer_disable(), but without any subsequent synchronization, allowing the device to be freed while still in use by readers. Fix this by clearing b->media_ptr in tipc_disable_l2_media() before calling synchronize_net(). This is safe to do now because the call order in bearer_disable() was reversed in 0d051bf93c06 ("tipc: make bearer packet filtering generic") to call tipc_node_delete_links() (which needs the pointer) before disable_media(). https: //lore.kernel.org/netdev/6a2c1007.428ffe26.258b27.015d.GAE@google.com/T/#u | ||||
| CVE-2026-74317 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ixgbe: do not configure xps for XDP queues netif_set_xps_queue() should not be called for an XDP Tx queue, since such queues are not netdev-exposed. On systems with number of CPUs >=64, on E610 adapter, netdev is configured with maximum number queue pairs being 63 (due to MSI-X assignment), but configuring XDP results in 64 XDP queues. So, during XDP program load, when netif_set_xps_queue() is called for the last XDP queue, we get a WARNING with a call trace and KASAN report afterwards (if enabled). [ 2012.699800] WARNING: net/core/dev.c:2854 at __netif_set_xps_queue+0x116a/0x1e40, CPU#36: xdpsock/103668 [...] [ 2012.700029] RIP: 0010:__netif_set_xps_queue+0x116a/0x1e40 [ 2012.700035] Code: b6 34 06 48 89 f8 83 e0 07 83 c0 01 40 38 f0 7c 09 40 84 f6 0f 85 03 0a 00 00 0f b7 44 24 40 66 43 89 44 6a 18 e9 01 fb ff ff <0f> 0b e9 f2 ee ff ff 44 8b 44 24 44 45 85 c0 74 50 4d 85 e4 0f 84 [ 2012.700040] RSP: 0018:ffff8882369aeb28 EFLAGS: 00010246 [ 2012.700046] RAX: 0000000000000000 RBX: 000000000000003f RCX: 0000000000000000 [ 2012.700050] RDX: 1ffff1111da3d891 RSI: ffff888120e34250 RDI: ffff8888ed1ec488 [ 2012.700054] RBP: ffff888913281560 R08: 0000000000000000 R09: ffff8888ed1ec000 [ 2012.700058] R10: ffff8888a2e83180 R11: 0000000000000000 R12: 0000000000007fa8 [ 2012.700061] R13: 000000000000003f R14: ffff888120e34854 R15: ffff8889132817c8 [ 2012.700065] FS: 00007fc8ea9ff740(0000) GS:ffff88884cefe000(0000) knlGS:0000000000000000 [ 2012.700069] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2012.700073] CR2: 00007f81c8000020 CR3: 00000002299f8006 CR4: 00000000007726f0 [ 2012.700077] PKRU: 55555554 [ 2012.700080] Call Trace: [ 2012.700084] <TASK> [ 2012.700087] ? ktime_get+0x61/0x150 [ 2012.700097] ? usleep_range_state+0x133/0x1b0 [ 2012.700108] ? __pfx_usleep_range_state+0x10/0x10 [ 2012.700114] netif_set_xps_queue+0x31/0x50 [ 2012.700119] ixgbe_configure_tx_ring+0x472/0x920 [ixgbe] [...] [ 2012.700486] ixgbe_xdp+0x38f/0x750 [ixgbe] [...] [ 2012.701094] BUG: KASAN: slab-out-of-bounds in __netif_set_xps_queue+0x1ac5/0x1e40 [ 2012.701100] Write of size 4 at addr ffff88888d43cff8 by task xdpsock/103668 Skip XPS configuration for XDP Tx queues. | ||||
| CVE-2026-74343 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: kernfs: fix xattr race condition with multiple superblocks Multiple superblocks with different namespaces can share the same kernfs_node when kernfs_test_super() finds a matching root but different namespace. This means multiple inodes from different superblocks can reference the same kernfs_node->iattr->xattrs structure. The VFS layer only holds per-inode locks during xattr operations, which is insufficient to serialize concurrent xattr modifications on the shared kernfs_node. This can lead to race conditions in simple_xattr_set() where the lookup->replace/remove sequence is not atomic with respect to operations from other superblocks. Fix this by protecting xattr operations with the existing hashed kernfs_locks->open_file_mutex[] array, which is already used to protect per-node open file data. The hashed mutex array provides scalable per-node serialization (scaled by CPU count, up to 1024 locks on 32+ CPU systems) with zero memory overhead. Changes: - Rename open_file_mutex[] to node_mutex[] to reflect dual purpose - Add kernfs_node_lock_ptr() and kernfs_node_lock() helpers - Protect simple_xattr_set() calls in kernfs_xattr_set() and kernfs_vfs_user_xattr_set() with the hashed mutex - Update file.c to use new helpers via compatibility wrappers - Update documentation to explain the extended lock usage | ||||
| CVE-2026-72419 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_nat: avoid invalid nat_net pointer use on failed nf_nat_init() We ran into below KASAN splat, which is mostly uninteresting, beside for having nf_nat_register_fn() in the call chain as a cause for the offending access: ================================================================== BUG: KASAN: slab-out-of-bounds in nf_nat_register_fn+0x5f9/0x640 Read of size 8 at addr ffff890031e54c20 by task iptables/9510 CPU: 0 UID: 0 PID: 9510 Comm: iptables Not tainted 6.18.18-grsec-full-20260320181326 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> […] dump_stack_lvl+0xee/0x160 ffff88004117eeb8 […] print_report+0x6e/0x640 ffff88004117eee0 […] ? __phys_addr+0x8e/0x140 ffff88004117eef0 […] ? kasan_addr_to_slab+0x51/0xe0 ffff88004117ef08 […] ? complete_report_info+0xec/0x1c0 ffff88004117ef20 […] ? nf_nat_register_fn+0x5f9/0x640 ffff88004117ef48 […] kasan_report+0xbc/0x140 ffff88004117ef50 […] ? nf_nat_register_fn+0x5f9/0x640 ffff88004117ef90 […] nf_nat_register_fn+0x5f9/0x640 ffff88004117eff8 […] ? nf_nat_icmp_reply_translation+0x6e0/0x6e0 ffff88004117f070 […] nf_tables_register_hook.part.0+0xa0/0x220 ffff88004117f080 […] nf_tables_addchain.constprop.0+0x1054/0x1fc0 ffff88004117f0b8 […] ? nft_chain_lookup.part.0+0x4ce/0xac0 ffff88004117f130 […] ? nf_tables_abort+0x3d80/0x3d80 ffff88004117f190 […] ? nf_tables_dumpreset_obj+0x100/0x100 ffff88004117f1c8 […] ? nft_table_lookup.part.0+0x255/0x300 ffff88004117f310 […] ? nf_tables_newchain+0x21a4/0x2fa0 ffff88004117f358 […] nf_tables_newchain+0x21a4/0x2fa0 ffff88004117f360 […] ? nf_tables_addchain.constprop.0+0x1fc0/0x1fc0 ffff88004117f458 […] ? nla_get_range_signed+0x4a0/0x4a0 ffff88004117f488 […] ? lock_acquire+0x16f/0x320 ffff88004117f490 […] ? find_held_lock+0x3b/0xe0 ffff88004117f4b0 […] ? __nla_parse+0x45/0x80 ffff88004117f500 […] nfnetlink_rcv_batch+0xbca/0x19a0 ffff88004117f550 […] ? nfnetlink_net_exit_batch+0x120/0x120 ffff88004117f618 […] ? __sanitizer_cov_trace_switch+0x63/0xe0 ffff88004117f720 […] ? gr_acl_handle_mmap+0x1c4/0x320 ffff88004117f7c0 […] ? nla_get_range_signed+0x4a0/0x4a0 ffff88004117f7e8 […] ? gr_is_capable+0x6f/0xe0 ffff88004117f830 […] ? __nla_parse+0x45/0x80 ffff88004117f860 […] ? skb_pull+0x103/0x1a0 ffff88004117f880 […] nfnetlink_rcv+0x3db/0x4a0 ffff88004117f8b0 […] ? nfnetlink_rcv_batch+0x19a0/0x19a0 ffff88004117f8d8 […] ? netlink_lookup+0xe2/0x240 ffff88004117f900 […] netlink_unicast+0x74b/0xb00 ffff88004117f930 […] ? netlink_attachskb+0xb20/0xb20 ffff88004117f980 […] ? __check_object_size+0x3e/0xaa0 ffff88004117f998 […] ? security_netlink_send+0x51/0x160 ffff88004117f9c8 […] netlink_sendmsg+0xa03/0x1200 ffff88004117f9f8 […] ? netlink_unicast+0xb00/0xb00 ffff88004117fa70 […] ? netlink_unicast+0xb00/0xb00 ffff88004117fac8 […] ? ____sys_sendmsg+0xe2a/0x1040 ffff88004117faf8 […] ____sys_sendmsg+0xe2a/0x1040 ffff88004117fb00 […] ? kernel_recvmsg+0x300/0x300 ffff88004117fb60 […] ? reacquire_held_locks+0xe9/0x260 ffff88004117fbc8 […] ___sys_sendmsg+0x138/0x200 ffff88004117fbf8 […] ? do_recvmmsg+0x7e0/0x7e0 ffff88004117fc30 […] ? lockdep_hardirqs_on_prepare+0x101/0x1e0 ffff88004117fc50 […] ? lock_acquire+0x16f/0x320 ffff88004117fd20 […] ? lock_acquire+0x16f/0x320 ffff88004117fd58 […] ? find_held_lock+0x3b/0xe0 ffff88004117fd70 […] __sys_sendmsg+0x17a/0x260 ffff88004117fdc8 […] ? __sys_sendmsg_sock+0x80/0x80 ffff88004117fdf0 […] ? syscall_trace_enter+0x15e/0x2c0 ffff88004117fe98 […] do_syscall_64+0x7d/0x400 ffff88004117fec8 […] entry_SYSCALL_64_safe_stack+0x4a/0x60 ffff88004117fef8 </TASK> ================================================================== The out-of-bounds report, though, is a red herring as it is f ---truncated--- | ||||
| CVE-2026-72421 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 10 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: fib: Don't ignore error route in local/main tables. When CONFIG_IP_MULTIPLE_TABLES is enabled but no rule is added, fib_lookup() performs route lookup directly on two tables. Since the first lookup does not properly bail out, the result of an error route in the merged local/main table could be overwritten by another route in the default table: # unshare -n # ip link set lo up # ip route add 192.168.0.0/24 dev lo table 253 # ip route add unreachable 192.168.0.0/24 # ip route get 192.168.0.1 192.168.0.1 dev lo table default uid 0 cache <local> Once a random rule is added, the error route is respected: # ip rule add table 0 # ip rule del table 0 # ip route get 192.168.0.1 RTNETLINK answers: No route to host Let's fix the inconsistent behaviour. | ||||
| CVE-2026-72434 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: make sure gc is properly stopped Sashiko noticed that when destroying a set, cancel_delayed_work_sync() was called while gc calls queue_delayed_work() unconditionally which can lead not to properly shutting down the gc. | ||||
| CVE-2026-72502 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp: ipv6: clamp default adverting MSS to avoid GSO_BY_FRAGS (0xFFFF) When MTU is large, ip6_default_advmss() can return IPV6_MAXPLEN (65535). This is interpreted by TCP as mss_clamp, allowing the MSS to reach 65535. However, 0xFFFF is also used as a magic value GSO_BY_FRAGS in the kernel. If a TCP packet with gso_size=0xFFFF is passed to skb_segment(), it will be mistakenly treated as GSO_BY_FRAGS, leading to a NULL pointer dereference because local TCP packets do not use frag_list. Fix this by returning min(IPV6_MAXPLEN, GSO_BY_FRAGS - 1) (65534) from ip6_default_advmss() when MTU is large. Also update the stale comment in ip6_default_advmss() which suggested that IPV6_MAXPLEN is returned to mean "any MSS". | ||||
| CVE-2026-74288 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: fib_rules: Don't dump dying fib_rule in fib_rules_dump(). rocker_router_fib_event() calls fib_rule_get() during RCU dump. If the fib_rule is dying, refcount_inc() will complain about it. Let's call refcount_inc_not_zero() in fib_rules_dump(). | ||||
| CVE-2026-74397 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: IB/mlx5: Fix transport-domain rollback and initialize lb mutex earlier mlx5_ib_alloc_transport_domain() allocates a transport domain and then may fail in mlx5_ib_enable_lb(). In that case, the allocated TD is leaked. Fix this by deallocating the TD when mlx5_ib_enable_lb() returns an error. Also return 0 explicitly in the no-loopback-capability success branch, and move dev->lb.mutex initialization to mlx5_ib_stage_init_init(). | ||||
| CVE-2026-74496 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fou: Fix use-after-free in fou_create() fou_create() publishes struct fou through sk_user_data before adding the new FOU port to the per-netns list. If fou_add_to_port_list() fails, the error path frees fou while it is still reachable through sk_user_data. A concurrent receive can then dereference the freed object in fou_from_sock(). This ordering issue was previously noted in the linked discussion. The failure is reachable when local port 0 is requested. Each socket binds to a different ephemeral port, but fou_cfg_cmp() compares the requested port 0 and reports -EALREADY once an entry already exists. Release the tunnel socket before freeing fou so sk_user_data is cleared first, and defer reclamation with kfree_rcu() to protect concurrent RCU readers. This matches the lifetime handling in fou_release(). | ||||
| CVE-2026-74554 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix out-of-bounds clear_bit in ath12k_mac_dp_peer_cleanup() ath12k_mac_dp_peer_cleanup() clears the ML peer ID slot on the free_ml_peer_id_map bitmap by indexing it with dp_peer->peer_id. That is wrong: dp_peer->peer_id for an MLO peer always carries the ATH12K_PEER_ML_ID_VALID bit (BIT(13)), so clear_bit() is invoked with index >= 0x2000, which is far outside the bitmap of ATH12K_MAX_MLO_PEERS (256) bits and corrupts memory adjacent to ah->free_ml_peer_id_map. The intended bitmap entry also never gets cleared, so subsequent ath12k_peer_ml_alloc() calls eventually run out of IDs. The ID without the VALID bit is what ath12k_peer_ml_alloc() returned and is stored in ahsta->ml_peer_id. Use that instead. While there, also reset ahsta->ml_peer_id to ATH12K_MLO_PEER_ID_INVALID so the bitmap and ahsta->ml_peer_id stay in sync. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 | ||||
| CVE-2026-64154 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/adreno: Fix a reference leak in a6xx_gpu_init() In a6xx_gpu_init(), node is obtained via of_parse_phandle(). While there was a manual of_node_put() at the end of the common path, several early error returns would bypass this call, resulting in a reference leak. Fix this by using the __free(device_node) cleanup handler to release the reference when the variable goes out of scope. Patchwork: https://patchwork.freedesktop.org/patch/700661/ | ||||
| CVE-2026-64155 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix error path leaks in some WMI WOW calls Fix two instances where we used to directly return the result of ath11k_wmi_cmd_send(...). Because we did not check the return value, we also did not free the skb in the error path. | ||||
| CVE-2026-64157 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix partial invalidation of streaming-write folio In netfs_invalidate_folio(), if the region of a partial invalidation overlaps the front (but not all) of a dirty write cached in a streaming write page (dirty, but not uptodate, with the dirty region tracked by a netfs_folio struct), the function modifies the dirty region - but incorrectly as it moves the region forward by setting the start to the start, not the end, of the invalidation region. Fix this by setting finfo->dirty_offset to the end of the invalidation region (iend). | ||||