Filtered by vendor Redhat
Subscriptions
Filtered by product Enterprise Linux
Subscriptions
Total
15245 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-50236 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: Fix memory leak in management tx In the current logic, memory is allocated for storing the MSDU context during management packet TX but this memory is not being freed during management TX completion. Similar leaks are seen in the management TX cleanup logic. Kmemleak reports this problem as below, unreferenced object 0xffffff80b64ed250 (size 16): comm "kworker/u16:7", pid 148, jiffies 4294687130 (age 714.199s) hex dump (first 16 bytes): 00 2b d8 d8 80 ff ff ff c4 74 e9 fd 07 00 00 00 .+.......t...... backtrace: [<ffffffe6e7b245dc>] __kmem_cache_alloc_node+0x1e4/0x2d8 [<ffffffe6e7adde88>] kmalloc_trace+0x48/0x110 [<ffffffe6bbd765fc>] ath10k_wmi_tlv_op_gen_mgmt_tx_send+0xd4/0x1d8 [ath10k_core] [<ffffffe6bbd3eed4>] ath10k_mgmt_over_wmi_tx_work+0x134/0x298 [ath10k_core] [<ffffffe6e78d5974>] process_scheduled_works+0x1ac/0x400 [<ffffffe6e78d60b8>] worker_thread+0x208/0x328 [<ffffffe6e78dc890>] kthread+0x100/0x1c0 [<ffffffe6e78166c0>] ret_from_fork+0x10/0x20 Free the memory during completion and cleanup to fix the leak. Protect the mgmt_pending_tx idr_remove() operation in ath10k_wmi_tlv_op_cleanup_mgmt_tx_send() using ar->data_lock similar to other instances. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1 | ||||
| CVE-2024-50226 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cxl/port: Fix use-after-free, permit out-of-order decoder shutdown In support of investigating an initialization failure report [1], cxl_test was updated to register mock memory-devices after the mock root-port/bus device had been registered. That led to cxl_test crashing with a use-after-free bug with the following signature: cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem0:decoder7.0 @ 0 next: cxl_switch_uport.0 nr_eps: 1 nr_targets: 1 cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem4:decoder14.0 @ 1 next: cxl_switch_uport.0 nr_eps: 2 nr_targets: 1 cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[0] = cxl_switch_dport.0 for mem0:decoder7.0 @ 0 1) cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[1] = cxl_switch_dport.4 for mem4:decoder14.0 @ 1 [..] cxld_unregister: cxl decoder14.0: cxl_region_decode_reset: cxl_region region3: mock_decoder_reset: cxl_port port3: decoder3.0 reset 2) mock_decoder_reset: cxl_port port3: decoder3.0: out of order reset, expected decoder3.1 cxl_endpoint_decoder_release: cxl decoder14.0: [..] cxld_unregister: cxl decoder7.0: 3) cxl_region_decode_reset: cxl_region region3: Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bc3: 0000 [#1] PREEMPT SMP PTI [..] RIP: 0010:to_cxl_port+0x8/0x60 [cxl_core] [..] Call Trace: <TASK> cxl_region_decode_reset+0x69/0x190 [cxl_core] cxl_region_detach+0xe8/0x210 [cxl_core] cxl_decoder_kill_region+0x27/0x40 [cxl_core] cxld_unregister+0x5d/0x60 [cxl_core] At 1) a region has been established with 2 endpoint decoders (7.0 and 14.0). Those endpoints share a common switch-decoder in the topology (3.0). At teardown, 2), decoder14.0 is the first to be removed and hits the "out of order reset case" in the switch decoder. The effect though is that region3 cleanup is aborted leaving it in-tact and referencing decoder14.0. At 3) the second attempt to teardown region3 trips over the stale decoder14.0 object which has long since been deleted. The fix here is to recognize that the CXL specification places no mandate on in-order shutdown of switch-decoders, the driver enforces in-order allocation, and hardware enforces in-order commit. So, rather than fail and leave objects dangling, always remove them. In support of making cxl_region_decode_reset() always succeed, cxl_region_invalidate_memregion() failures are turned into warnings. Crashing the kernel is ok there since system integrity is at risk if caches cannot be managed around physical address mutation events like CXL region destruction. A new device_for_each_child_reverse_from() is added to cleanup port->commit_end after all dependent decoders have been disabled. In other words if decoders are allocated 0->1->2 and disabled 1->2->0 then port->commit_end only decrements from 2 after 2 has been disabled, and it decrements all the way to zero since 1 was disabled previously. | ||||
| CVE-2024-50216 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix finding a last resort AG in xfs_filestream_pick_ag When the main loop in xfs_filestream_pick_ag fails to find a suitable AG it tries to just pick the online AG. But the loop for that uses args->pag as loop iterator while the later code expects pag to be set. Fix this by reusing the max_pag case for this last resort, and also add a check for impossible case of no AG just to make sure that the uninitialized pag doesn't even escape in theory. | ||||
| CVE-2024-50215 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: assign dh_key to NULL after kfree_sensitive ctrl->dh_key might be used across multiple calls to nvmet_setup_dhgroup() for the same controller. So it's better to nullify it after release on error path in order to avoid double free later in nvmet_destroy_auth(). Found by Linux Verification Center (linuxtesting.org) with Svace. | ||||
| CVE-2024-50208 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Fix a bug while setting up Level-2 PBL pages Avoid memory corruption while setting up Level-2 PBL pages for the non MR resources when num_pages > 256K. There will be a single PDE page address (contiguous pages in the case of > PAGE_SIZE), but, current logic assumes multiple pages, leading to invalid memory access after 256K PBL entries in the PDE. | ||||
| CVE-2024-50201 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/radeon: Fix encoder->possible_clones Include the encoder itself in its possible_clones bitmask. In the past nothing validated that drivers were populating possible_clones correctly, but that changed in commit 74d2aacbe840 ("drm: Validate encoder->possible_clones"). Looks like radeon never got the memo and is still not following the rules 100% correctly. This results in some warnings during driver initialization: Bogus possible_clones: [ENCODER:46:TV-46] possible_clones=0x4 (full encoder mask=0x7) WARNING: CPU: 0 PID: 170 at drivers/gpu/drm/drm_mode_config.c:615 drm_mode_config_validate+0x113/0x39c ... (cherry picked from commit 3b6e7d40649c0d75572039aff9d0911864c689db) | ||||
| CVE-2024-50200 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: maple_tree: correct tree corruption on spanning store Patch series "maple_tree: correct tree corruption on spanning store", v3. There has been a nasty yet subtle maple tree corruption bug that appears to have been in existence since the inception of the algorithm. This bug seems far more likely to happen since commit f8d112a4e657 ("mm/mmap: avoid zeroing vma tree in mmap_region()"), which is the point at which reports started to be submitted concerning this bug. We were made definitely aware of the bug thanks to the kind efforts of Bert Karwatzki who helped enormously in my being able to track this down and identify the cause of it. The bug arises when an attempt is made to perform a spanning store across two leaf nodes, where the right leaf node is the rightmost child of the shared parent, AND the store completely consumes the right-mode node. This results in mas_wr_spanning_store() mitakenly duplicating the new and existing entries at the maximum pivot within the range, and thus maple tree corruption. The fix patch corrects this by detecting this scenario and disallowing the mistaken duplicate copy. The fix patch commit message goes into great detail as to how this occurs. This series also includes a test which reliably reproduces the issue, and asserts that the fix works correctly. Bert has kindly tested the fix and confirmed it resolved his issues. Also Mikhail Gavrilov kindly reported what appears to be precisely the same bug, which this fix should also resolve. This patch (of 2): There has been a subtle bug present in the maple tree implementation from its inception. This arises from how stores are performed - when a store occurs, it will overwrite overlapping ranges and adjust the tree as necessary to accommodate this. A range may always ultimately span two leaf nodes. In this instance we walk the two leaf nodes, determine which elements are not overwritten to the left and to the right of the start and end of the ranges respectively and then rebalance the tree to contain these entries and the newly inserted one. This kind of store is dubbed a 'spanning store' and is implemented by mas_wr_spanning_store(). In order to reach this stage, mas_store_gfp() invokes mas_wr_preallocate(), mas_wr_store_type() and mas_wr_walk() in turn to walk the tree and update the object (mas) to traverse to the location where the write should be performed, determining its store type. When a spanning store is required, this function returns false stopping at the parent node which contains the target range, and mas_wr_store_type() marks the mas->store_type as wr_spanning_store to denote this fact. When we go to perform the store in mas_wr_spanning_store(), we first determine the elements AFTER the END of the range we wish to store (that is, to the right of the entry to be inserted) - we do this by walking to the NEXT pivot in the tree (i.e. r_mas.last + 1), starting at the node we have just determined contains the range over which we intend to write. We then turn our attention to the entries to the left of the entry we are inserting, whose state is represented by l_mas, and copy these into a 'big node', which is a special node which contains enough slots to contain two leaf node's worth of data. We then copy the entry we wish to store immediately after this - the copy and the insertion of the new entry is performed by mas_store_b_node(). After this we copy the elements to the right of the end of the range which we are inserting, if we have not exceeded the length of the node (i.e. r_mas.offset <= r_mas.end). Herein lies the bug - under very specific circumstances, this logic can break and corrupt the maple tree. Consider the following tree: Height 0 Root Node / \ pivot = 0xffff / \ pivot = ULONG_MAX / ---truncated--- | ||||
| CVE-2024-50199 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/swapfile: skip HugeTLB pages for unuse_vma I got a bad pud error and lost a 1GB HugeTLB when calling swapoff. The problem can be reproduced by the following steps: 1. Allocate an anonymous 1GB HugeTLB and some other anonymous memory. 2. Swapout the above anonymous memory. 3. run swapoff and we will get a bad pud error in kernel message: mm/pgtable-generic.c:42: bad pud 00000000743d215d(84000001400000e7) We can tell that pud_clear_bad is called by pud_none_or_clear_bad in unuse_pud_range() by ftrace. And therefore the HugeTLB pages will never be freed because we lost it from page table. We can skip HugeTLB pages for unuse_vma to fix it. | ||||
| CVE-2024-50197 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: intel: platform: fix error path in device_for_each_child_node() The device_for_each_child_node() loop requires calls to fwnode_handle_put() upon early returns to decrement the refcount of the child node and avoid leaking memory if that error path is triggered. There is one early returns within that loop in intel_platform_pinctrl_prepare_community(), but fwnode_handle_put() is missing. Instead of adding the missing call, the scoped version of the loop can be used to simplify the code and avoid mistakes in the future if new early returns are added, as the child node is only used for parsing, and it is never assigned. | ||||
| CVE-2024-50192 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v4: Don't allow a VMOVP on a dying VPE Kunkun Jiang reported that there is a small window of opportunity for userspace to force a change of affinity for a VPE while the VPE has already been unmapped, but the corresponding doorbell interrupt still visible in /proc/irq/. Plug the race by checking the value of vmapp_count, which tracks whether the VPE is mapped ot not, and returning an error in this case. This involves making vmapp_count common to both GICv4.1 and its v4.0 ancestor. | ||||
| CVE-2024-50191 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: don't set SB_RDONLY after filesystem errors When the filesystem is mounted with errors=remount-ro, we were setting SB_RDONLY flag to stop all filesystem modifications. We knew this misses proper locking (sb->s_umount) and does not go through proper filesystem remount procedure but it has been the way this worked since early ext2 days and it was good enough for catastrophic situation damage mitigation. Recently, syzbot has found a way (see link) to trigger warnings in filesystem freezing because the code got confused by SB_RDONLY changing under its hands. Since these days we set EXT4_FLAGS_SHUTDOWN on the superblock which is enough to stop all filesystem modifications, modifying SB_RDONLY shouldn't be needed. So stop doing that. | ||||
| CVE-2024-50189 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: Switch to device-managed dmam_alloc_coherent() Using the device-managed version allows to simplify clean-up in probe() error path. Additionally, this device-managed ensures proper cleanup, which helps to resolve memory errors, page faults, btrfs going read-only, and btrfs disk corruption. | ||||
| CVE-2024-50182 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: secretmem: disable memfd_secret() if arch cannot set direct map Return -ENOSYS from memfd_secret() syscall if !can_set_direct_map(). This is the case for example on some arm64 configurations, where marking 4k PTEs in the direct map not present can only be done if the direct map is set up at 4k granularity in the first place (as ARM's break-before-make semantics do not easily allow breaking apart large/gigantic pages). More precisely, on arm64 systems with !can_set_direct_map(), set_direct_map_invalid_noflush() is a no-op, however it returns success (0) instead of an error. This means that memfd_secret will seemingly "work" (e.g. syscall succeeds, you can mmap the fd and fault in pages), but it does not actually achieve its goal of removing its memory from the direct map. Note that with this patch, memfd_secret() will start erroring on systems where can_set_direct_map() returns false (arm64 with CONFIG_RODATA_FULL_DEFAULT_ENABLED=n, CONFIG_DEBUG_PAGEALLOC=n and CONFIG_KFENCE=n), but that still seems better than the current silent failure. Since CONFIG_RODATA_FULL_DEFAULT_ENABLED defaults to 'y', most arm64 systems actually have a working memfd_secret() and aren't be affected. From going through the iterations of the original memfd_secret patch series, it seems that disabling the syscall in these scenarios was the intended behavior [1] (preferred over having set_direct_map_invalid_noflush return an error as that would result in SIGBUSes at page-fault time), however the check for it got dropped between v16 [2] and v17 [3], when secretmem moved away from CMA allocations. [1]: https://lore.kernel.org/lkml/20201124164930.GK8537@kernel.org/ [2]: https://lore.kernel.org/lkml/20210121122723.3446-11-rppt@kernel.org/#t [3]: https://lore.kernel.org/lkml/20201125092208.12544-10-rppt@kernel.org/ | ||||
| CVE-2024-50169 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vsock: Update rx_bytes on read_skb() Make sure virtio_transport_inc_rx_pkt() and virtio_transport_dec_rx_pkt() calls are balanced (i.e. virtio_vsock_sock::rx_bytes doesn't lie) after vsock_transport::read_skb(). While here, also inform the peer that we've freed up space and it has more credit. Failing to update rx_bytes after packet is dequeued leads to a warning on SOCK_STREAM recv(): [ 233.396654] rx_queue is empty, but rx_bytes is non-zero [ 233.396702] WARNING: CPU: 11 PID: 40601 at net/vmw_vsock/virtio_transport_common.c:589 | ||||
| CVE-2024-50163 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Make sure internal and UAPI bpf_redirect flags don't overlap The bpf_redirect_info is shared between the SKB and XDP redirect paths, and the two paths use the same numeric flag values in the ri->flags field (specifically, BPF_F_BROADCAST == BPF_F_NEXTHOP). This means that if skb bpf_redirect_neigh() is used with a non-NULL params argument and, subsequently, an XDP redirect is performed using the same bpf_redirect_info struct, the XDP path will get confused and end up crashing, which syzbot managed to trigger. With the stack-allocated bpf_redirect_info, the structure is no longer shared between the SKB and XDP paths, so the crash doesn't happen anymore. However, different code paths using identically-numbered flag values in the same struct field still seems like a bit of a mess, so this patch cleans that up by moving the flag definitions together and redefining the three flags in BPF_F_REDIRECT_INTERNAL to not overlap with the flags used for XDP. It also adds a BUILD_BUG_ON() check to make sure the overlap is not re-introduced by mistake. | ||||
| CVE-2024-50162 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: devmap: provide rxq after redirect rxq contains a pointer to the device from where the redirect happened. Currently, the BPF program that was executed after a redirect via BPF_MAP_TYPE_DEVMAP* does not have it set. This is particularly bad since accessing ingress_ifindex, e.g. SEC("xdp") int prog(struct xdp_md *pkt) { return bpf_redirect_map(&dev_redirect_map, 0, 0); } SEC("xdp/devmap") int prog_after_redirect(struct xdp_md *pkt) { bpf_printk("ifindex %i", pkt->ingress_ifindex); return XDP_PASS; } depends on access to rxq, so a NULL pointer gets dereferenced: <1>[ 574.475170] BUG: kernel NULL pointer dereference, address: 0000000000000000 <1>[ 574.475188] #PF: supervisor read access in kernel mode <1>[ 574.475194] #PF: error_code(0x0000) - not-present page <6>[ 574.475199] PGD 0 P4D 0 <4>[ 574.475207] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI <4>[ 574.475217] CPU: 4 UID: 0 PID: 217 Comm: kworker/4:1 Not tainted 6.11.0-rc5-reduced-00859-g780801200300 #23 <4>[ 574.475226] Hardware name: Intel(R) Client Systems NUC13ANHi7/NUC13ANBi7, BIOS ANRPL357.0026.2023.0314.1458 03/14/2023 <4>[ 574.475231] Workqueue: mld mld_ifc_work <4>[ 574.475247] RIP: 0010:bpf_prog_5e13354d9cf5018a_prog_after_redirect+0x17/0x3c <4>[ 574.475257] Code: cc cc cc cc cc cc cc 80 00 00 00 cc cc cc cc cc cc cc cc f3 0f 1e fa 0f 1f 44 00 00 66 90 55 48 89 e5 f3 0f 1e fa 48 8b 57 20 <48> 8b 52 00 8b 92 e0 00 00 00 48 bf f8 a6 d5 c4 5d a0 ff ff be 0b <4>[ 574.475263] RSP: 0018:ffffa62440280c98 EFLAGS: 00010206 <4>[ 574.475269] RAX: ffffa62440280cd8 RBX: 0000000000000001 RCX: 0000000000000000 <4>[ 574.475274] RDX: 0000000000000000 RSI: ffffa62440549048 RDI: ffffa62440280ce0 <4>[ 574.475278] RBP: ffffa62440280c98 R08: 0000000000000002 R09: 0000000000000001 <4>[ 574.475281] R10: ffffa05dc8b98000 R11: ffffa05f577fca40 R12: ffffa05dcab24000 <4>[ 574.475285] R13: ffffa62440280ce0 R14: ffffa62440549048 R15: ffffa62440549000 <4>[ 574.475289] FS: 0000000000000000(0000) GS:ffffa05f4f700000(0000) knlGS:0000000000000000 <4>[ 574.475294] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 574.475298] CR2: 0000000000000000 CR3: 000000025522e000 CR4: 0000000000f50ef0 <4>[ 574.475303] PKRU: 55555554 <4>[ 574.475306] Call Trace: <4>[ 574.475313] <IRQ> <4>[ 574.475318] ? __die+0x23/0x70 <4>[ 574.475329] ? page_fault_oops+0x180/0x4c0 <4>[ 574.475339] ? skb_pp_cow_data+0x34c/0x490 <4>[ 574.475346] ? kmem_cache_free+0x257/0x280 <4>[ 574.475357] ? exc_page_fault+0x67/0x150 <4>[ 574.475368] ? asm_exc_page_fault+0x26/0x30 <4>[ 574.475381] ? bpf_prog_5e13354d9cf5018a_prog_after_redirect+0x17/0x3c <4>[ 574.475386] bq_xmit_all+0x158/0x420 <4>[ 574.475397] __dev_flush+0x30/0x90 <4>[ 574.475407] veth_poll+0x216/0x250 [veth] <4>[ 574.475421] __napi_poll+0x28/0x1c0 <4>[ 574.475430] net_rx_action+0x32d/0x3a0 <4>[ 574.475441] handle_softirqs+0xcb/0x2c0 <4>[ 574.475451] do_softirq+0x40/0x60 <4>[ 574.475458] </IRQ> <4>[ 574.475461] <TASK> <4>[ 574.475464] __local_bh_enable_ip+0x66/0x70 <4>[ 574.475471] __dev_queue_xmit+0x268/0xe40 <4>[ 574.475480] ? selinux_ip_postroute+0x213/0x420 <4>[ 574.475491] ? alloc_skb_with_frags+0x4a/0x1d0 <4>[ 574.475502] ip6_finish_output2+0x2be/0x640 <4>[ 574.475512] ? nf_hook_slow+0x42/0xf0 <4>[ 574.475521] ip6_finish_output+0x194/0x300 <4>[ 574.475529] ? __pfx_ip6_finish_output+0x10/0x10 <4>[ 574.475538] mld_sendpack+0x17c/0x240 <4>[ 574.475548] mld_ifc_work+0x192/0x410 <4>[ 574.475557] process_one_work+0x15d/0x380 <4>[ 574.475566] worker_thread+0x29d/0x3a0 <4>[ 574.475573] ? __pfx_worker_thread+0x10/0x10 <4>[ 574.475580] ? __pfx_worker_thread+0x10/0x10 <4>[ 574.475587] kthread+0xcd/0x100 <4>[ 574.475597] ? __pfx_kthread+0x10/0x10 <4>[ 574.475606] ret_from_fork+0x31/0x50 <4>[ 574.475615] ? __pfx_kthread+0x10/0x10 <4>[ 574.475623] ret_from_fork_asm+0x1a/0x ---truncated--- | ||||
| CVE-2024-50153 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Fix null-ptr-deref in target_alloc_device() There is a null-ptr-deref issue reported by KASAN: BUG: KASAN: null-ptr-deref in target_alloc_device+0xbc4/0xbe0 [target_core_mod] ... kasan_report+0xb9/0xf0 target_alloc_device+0xbc4/0xbe0 [target_core_mod] core_dev_setup_virtual_lun0+0xef/0x1f0 [target_core_mod] target_core_init_configfs+0x205/0x420 [target_core_mod] do_one_initcall+0xdd/0x4e0 ... entry_SYSCALL_64_after_hwframe+0x76/0x7e In target_alloc_device(), if allocing memory for dev queues fails, then dev will be freed by dev->transport->free_device(), but dev->transport is not initialized at that time, which will lead to a null pointer reference problem. Fixing this bug by freeing dev with hba->backend->ops->free_device(). | ||||
| CVE-2024-50152 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix possible double free in smb2_set_ea() Clang static checker(scan-build) warning： fs/smb/client/smb2ops.c:1304:2: Attempt to free released memory. 1304 | kfree(ea); | ^~~~~~~~~ There is a double free in such case: 'ea is initialized to NULL' -> 'first successful memory allocation for ea' -> 'something failed, goto sea_exit' -> 'first memory release for ea' -> 'goto replay_again' -> 'second goto sea_exit before allocate memory for ea' -> 'second memory release for ea resulted in double free'. Re-initialie 'ea' to NULL near to the replay_again label, it can fix this double free problem. | ||||
| CVE-2024-50151 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOBs when building SMB2_IOCTL request When using encryption, either enforced by the server or when using 'seal' mount option, the client will squash all compound request buffers down for encryption into a single iov in smb2_set_next_command(). SMB2_ioctl_init() allocates a small buffer (448 bytes) to hold the SMB2_IOCTL request in the first iov, and if the user passes an input buffer that is greater than 328 bytes, smb2_set_next_command() will end up writing off the end of @rqst->iov[0].iov_base as shown below: mount.cifs //srv/share /mnt -o ...,seal ln -s $(perl -e "print('a')for 1..1024") /mnt/link BUG: KASAN: slab-out-of-bounds in smb2_set_next_command.cold+0x1d6/0x24c [cifs] Write of size 4116 at addr ffff8881148fcab8 by task ln/859 CPU: 1 UID: 0 PID: 859 Comm: ln Not tainted 6.12.0-rc3 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] print_report+0x156/0x4d9 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] ? __virt_addr_valid+0x145/0x310 ? __phys_addr+0x46/0x90 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] kasan_report+0xda/0x110 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] kasan_check_range+0x10f/0x1f0 __asan_memcpy+0x3c/0x60 smb2_set_next_command.cold+0x1d6/0x24c [cifs] smb2_compound_op+0x238c/0x3840 [cifs] ? kasan_save_track+0x14/0x30 ? kasan_save_free_info+0x3b/0x70 ? vfs_symlink+0x1a1/0x2c0 ? do_symlinkat+0x108/0x1c0 ? __pfx_smb2_compound_op+0x10/0x10 [cifs] ? kmem_cache_free+0x118/0x3e0 ? cifs_get_writable_path+0xeb/0x1a0 [cifs] smb2_get_reparse_inode+0x423/0x540 [cifs] ? __pfx_smb2_get_reparse_inode+0x10/0x10 [cifs] ? rcu_is_watching+0x20/0x50 ? __kmalloc_noprof+0x37c/0x480 ? smb2_create_reparse_symlink+0x257/0x490 [cifs] ? smb2_create_reparse_symlink+0x38f/0x490 [cifs] smb2_create_reparse_symlink+0x38f/0x490 [cifs] ? __pfx_smb2_create_reparse_symlink+0x10/0x10 [cifs] ? find_held_lock+0x8a/0xa0 ? hlock_class+0x32/0xb0 ? __build_path_from_dentry_optional_prefix+0x19d/0x2e0 [cifs] cifs_symlink+0x24f/0x960 [cifs] ? __pfx_make_vfsuid+0x10/0x10 ? __pfx_cifs_symlink+0x10/0x10 [cifs] ? make_vfsgid+0x6b/0xc0 ? generic_permission+0x96/0x2d0 vfs_symlink+0x1a1/0x2c0 do_symlinkat+0x108/0x1c0 ? __pfx_do_symlinkat+0x10/0x10 ? strncpy_from_user+0xaa/0x160 __x64_sys_symlinkat+0xb9/0xf0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f08d75c13bb | ||||
| CVE-2024-50150 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: altmode should keep reference to parent The altmode device release refers to its parent device, but without keeping a reference to it. When registering the altmode, get a reference to the parent and put it in the release function. Before this fix, when using CONFIG_DEBUG_KOBJECT_RELEASE, we see issues like this: [ 43.572860] kobject: 'port0.0' (ffff8880057ba008): kobject_release, parent 0000000000000000 (delayed 3000) [ 43.573532] kobject: 'port0.1' (ffff8880057bd008): kobject_release, parent 0000000000000000 (delayed 1000) [ 43.574407] kobject: 'port0' (ffff8880057b9008): kobject_release, parent 0000000000000000 (delayed 3000) [ 43.575059] kobject: 'port1.0' (ffff8880057ca008): kobject_release, parent 0000000000000000 (delayed 4000) [ 43.575908] kobject: 'port1.1' (ffff8880057c9008): kobject_release, parent 0000000000000000 (delayed 4000) [ 43.576908] kobject: 'typec' (ffff8880062dbc00): kobject_release, parent 0000000000000000 (delayed 4000) [ 43.577769] kobject: 'port1' (ffff8880057bf008): kobject_release, parent 0000000000000000 (delayed 3000) [ 46.612867] ================================================================== [ 46.613402] BUG: KASAN: slab-use-after-free in typec_altmode_release+0x38/0x129 [ 46.614003] Read of size 8 at addr ffff8880057b9118 by task kworker/2:1/48 [ 46.614538] [ 46.614668] CPU: 2 UID: 0 PID: 48 Comm: kworker/2:1 Not tainted 6.12.0-rc1-00138-gedbae730ad31 #535 [ 46.615391] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 [ 46.616042] Workqueue: events kobject_delayed_cleanup [ 46.616446] Call Trace: [ 46.616648] <TASK> [ 46.616820] dump_stack_lvl+0x5b/0x7c [ 46.617112] ? typec_altmode_release+0x38/0x129 [ 46.617470] print_report+0x14c/0x49e [ 46.617769] ? rcu_read_unlock_sched+0x56/0x69 [ 46.618117] ? __virt_addr_valid+0x19a/0x1ab [ 46.618456] ? kmem_cache_debug_flags+0xc/0x1d [ 46.618807] ? typec_altmode_release+0x38/0x129 [ 46.619161] kasan_report+0x8d/0xb4 [ 46.619447] ? typec_altmode_release+0x38/0x129 [ 46.619809] ? process_scheduled_works+0x3cb/0x85f [ 46.620185] typec_altmode_release+0x38/0x129 [ 46.620537] ? process_scheduled_works+0x3cb/0x85f [ 46.620907] device_release+0xaf/0xf2 [ 46.621206] kobject_delayed_cleanup+0x13b/0x17a [ 46.621584] process_scheduled_works+0x4f6/0x85f [ 46.621955] ? __pfx_process_scheduled_works+0x10/0x10 [ 46.622353] ? hlock_class+0x31/0x9a [ 46.622647] ? lock_acquired+0x361/0x3c3 [ 46.622956] ? move_linked_works+0x46/0x7d [ 46.623277] worker_thread+0x1ce/0x291 [ 46.623582] ? __kthread_parkme+0xc8/0xdf [ 46.623900] ? __pfx_worker_thread+0x10/0x10 [ 46.624236] kthread+0x17e/0x190 [ 46.624501] ? kthread+0xfb/0x190 [ 46.624756] ? __pfx_kthread+0x10/0x10 [ 46.625015] ret_from_fork+0x20/0x40 [ 46.625268] ? __pfx_kthread+0x10/0x10 [ 46.625532] ret_from_fork_asm+0x1a/0x30 [ 46.625805] </TASK> [ 46.625953] [ 46.626056] Allocated by task 678: [ 46.626287] kasan_save_stack+0x24/0x44 [ 46.626555] kasan_save_track+0x14/0x2d [ 46.626811] __kasan_kmalloc+0x3f/0x4d [ 46.627049] __kmalloc_noprof+0x1bf/0x1f0 [ 46.627362] typec_register_port+0x23/0x491 [ 46.627698] cros_typec_probe+0x634/0xbb6 [ 46.628026] platform_probe+0x47/0x8c [ 46.628311] really_probe+0x20a/0x47d [ 46.628605] device_driver_attach+0x39/0x72 [ 46.628940] bind_store+0x87/0xd7 [ 46.629213] kernfs_fop_write_iter+0x1aa/0x218 [ 46.629574] vfs_write+0x1d6/0x29b [ 46.629856] ksys_write+0xcd/0x13b [ 46.630128] do_syscall_64+0xd4/0x139 [ 46.630420] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 46.630820] [ 46.630946] Freed by task 48: [ 46.631182] kasan_save_stack+0x24/0x44 [ 46.631493] kasan_save_track+0x14/0x2d [ 46.631799] kasan_save_free_info+0x3f/0x4d [ 46.632144] __kasan_slab_free+0x37/0x45 [ 46.632474] ---truncated--- | ||||