Total
450 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2021-47433 | 2025-05-04 | 5.5 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix abort logic in btrfs_replace_file_extents Error injection testing uncovered a case where we'd end up with a corrupt file system with a missing extent in the middle of a file. This occurs because the if statement to decide if we should abort is wrong. The only way we would abort in this case is if we got a ret != -EOPNOTSUPP and we called from the file clone code. However the prealloc code uses this path too. Instead we need to abort if there is an error, and the only error we _don't_ abort on is -EOPNOTSUPP and only if we came from the clone file code. | ||||
| CVE-2021-47393 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2025-05-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (mlxreg-fan) Return non-zero value when fan current state is enforced from sysfs Fan speed minimum can be enforced from sysfs. For example, setting current fan speed to 20 is used to enforce fan speed to be at 100% speed, 19 - to be not below 90% speed, etcetera. This feature provides ability to limit fan speed according to some system wise considerations, like absence of some replaceable units or high system ambient temperature. Request for changing fan minimum speed is configuration request and can be set only through 'sysfs' write procedure. In this situation value of argument 'state' is above nominal fan speed maximum. Return non-zero code in this case to avoid thermal_cooling_device_stats_update() call, because in this case statistics update violates thermal statistics table range. The issues is observed in case kernel is configured with option CONFIG_THERMAL_STATISTICS. Here is the trace from KASAN: [ 159.506659] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x7d/0xb0 [ 159.516016] Read of size 4 at addr ffff888116163840 by task hw-management.s/7444 [ 159.545625] Call Trace: [ 159.548366] dump_stack+0x92/0xc1 [ 159.552084] ? thermal_cooling_device_stats_update+0x7d/0xb0 [ 159.635869] thermal_zone_device_update+0x345/0x780 [ 159.688711] thermal_zone_device_set_mode+0x7d/0xc0 [ 159.694174] mlxsw_thermal_modules_init+0x48f/0x590 [mlxsw_core] [ 159.700972] ? mlxsw_thermal_set_cur_state+0x5a0/0x5a0 [mlxsw_core] [ 159.731827] mlxsw_thermal_init+0x763/0x880 [mlxsw_core] [ 160.070233] RIP: 0033:0x7fd995909970 [ 160.074239] Code: 73 01 c3 48 8b 0d 28 d5 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 99 2d 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff .. [ 160.095242] RSP: 002b:00007fff54f5d938 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 160.103722] RAX: ffffffffffffffda RBX: 0000000000000013 RCX: 00007fd995909970 [ 160.111710] RDX: 0000000000000013 RSI: 0000000001906008 RDI: 0000000000000001 [ 160.119699] RBP: 0000000001906008 R08: 00007fd995bc9760 R09: 00007fd996210700 [ 160.127687] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000013 [ 160.135673] R13: 0000000000000001 R14: 00007fd995bc8600 R15: 0000000000000013 [ 160.143671] [ 160.145338] Allocated by task 2924: [ 160.149242] kasan_save_stack+0x19/0x40 [ 160.153541] __kasan_kmalloc+0x7f/0xa0 [ 160.157743] __kmalloc+0x1a2/0x2b0 [ 160.161552] thermal_cooling_device_setup_sysfs+0xf9/0x1a0 [ 160.167687] __thermal_cooling_device_register+0x1b5/0x500 [ 160.173833] devm_thermal_of_cooling_device_register+0x60/0xa0 [ 160.180356] mlxreg_fan_probe+0x474/0x5e0 [mlxreg_fan] [ 160.248140] [ 160.249807] The buggy address belongs to the object at ffff888116163400 [ 160.249807] which belongs to the cache kmalloc-1k of size 1024 [ 160.263814] The buggy address is located 64 bytes to the right of [ 160.263814] 1024-byte region [ffff888116163400, ffff888116163800) [ 160.277536] The buggy address belongs to the page: [ 160.282898] page:0000000012275840 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888116167000 pfn:0x116160 [ 160.294872] head:0000000012275840 order:3 compound_mapcount:0 compound_pincount:0 [ 160.303251] flags: 0x200000000010200(slab|head|node=0|zone=2) [ 160.309694] raw: 0200000000010200 ffffea00046f7208 ffffea0004928208 ffff88810004dbc0 [ 160.318367] raw: ffff888116167000 00000000000a0006 00000001ffffffff 0000000000000000 [ 160.327033] page dumped because: kasan: bad access detected [ 160.333270] [ 160.334937] Memory state around the buggy address: [ 160.356469] >ffff888116163800: fc .. | ||||
| CVE-2021-47227 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Prevent state corruption in __fpu__restore_sig() The non-compacted slowpath uses __copy_from_user() and copies the entire user buffer into the kernel buffer, verbatim. This means that the kernel buffer may now contain entirely invalid state on which XRSTOR will #GP. validate_user_xstate_header() can detect some of that corruption, but that leaves the onus on callers to clear the buffer. Prior to XSAVES support, it was possible just to reinitialize the buffer, completely, but with supervisor states that is not longer possible as the buffer clearing code split got it backwards. Fixing that is possible but not corrupting the state in the first place is more robust. Avoid corruption of the kernel XSAVE buffer by using copy_user_to_xstate() which validates the XSAVE header contents before copying the actual states to the kernel. copy_user_to_xstate() was previously only called for compacted-format kernel buffers, but it works for both compacted and non-compacted forms. Using it for the non-compacted form is slower because of multiple __copy_from_user() operations, but that cost is less important than robust code in an already slow path. [ Changelog polished by Dave Hansen ] | ||||
| CVE-2021-47007 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix panic during f2fs_resize_fs() f2fs_resize_fs() hangs in below callstack with testcase: - mkfs 16GB image & mount image - dd 8GB fileA - dd 8GB fileB - sync - rm fileA - sync - resize filesystem to 8GB kernel BUG at segment.c:2484! Call Trace: allocate_segment_by_default+0x92/0xf0 [f2fs] f2fs_allocate_data_block+0x44b/0x7e0 [f2fs] do_write_page+0x5a/0x110 [f2fs] f2fs_outplace_write_data+0x55/0x100 [f2fs] f2fs_do_write_data_page+0x392/0x850 [f2fs] move_data_page+0x233/0x320 [f2fs] do_garbage_collect+0x14d9/0x1660 [f2fs] free_segment_range+0x1f7/0x310 [f2fs] f2fs_resize_fs+0x118/0x330 [f2fs] __f2fs_ioctl+0x487/0x3680 [f2fs] __x64_sys_ioctl+0x8e/0xd0 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The root cause is we forgot to check that whether we have enough space in resized filesystem to store all valid blocks in before-resizing filesystem, then allocator will run out-of-space during block migration in free_segment_range(). | ||||
| CVE-2021-46934 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: i2c: validate user data in compat ioctl Wrong user data may cause warning in i2c_transfer(), ex: zero msgs. Userspace should not be able to trigger warnings, so this patch adds validation checks for user data in compact ioctl to prevent reported warnings | ||||
| CVE-2021-46909 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ARM: footbridge: fix PCI interrupt mapping Since commit 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()"), the PCI code will call the IRQ mapping function whenever a PCI driver is probed. If these are marked as __init, this causes an oops if a PCI driver is loaded or bound after the kernel has initialised. | ||||
| CVE-2024-37372 | 2025-05-02 | 3.6 Low | ||
| The Permission Model assumes that any path starting with two backslashes \ has a four-character prefix that can be ignored, which is not always true. This subtle bug leads to vulnerable edge cases. | ||||
| CVE-2022-20426 | 1 Google | 1 Android | 2025-05-01 | 5.5 Medium |
| In multiple functions of many files, there is a possible obstruction of the user's ability to select a phone account due to resource exhaustion. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-10 Android-11 Android-12 Android-12L Android-13Android ID: A-236263294 | ||||
| CVE-2024-43435 | 1 Moodle | 1 Moodle | 2025-05-01 | 5.3 Medium |
| A flaw was found in moodle. Insufficient capability checks make it possible for users with access to restore glossaries in courses to restore them into the global site glossary. | ||||
| CVE-2024-39869 | 1 Siemens | 1 Sinema Remote Connect Server | 2025-05-01 | 6.5 Medium |
| A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V3.2 SP1). Affected products allow to upload certificates. An authenticated attacker could upload a crafted certificates leading to a permanent denial-of-service situation. In order to recover from such an attack, the offending certificate needs to be removed manually. | ||||
| CVE-2025-32051 | 1 Redhat | 1 Enterprise Linux | 2025-05-01 | 5.9 Medium |
| A flaw was found in libsoup. The libsoup soup_uri_decode_data_uri() function may crash when processing malformed data URI. This flaw allows an attacker to cause a denial of service (DoS). | ||||
| CVE-2024-50602 | 2 Libexpat Project, Redhat | 3 Libexpat, Enterprise Linux, Rhel Eus | 2025-04-30 | 5.9 Medium |
| An issue was discovered in libexpat before 2.6.4. There is a crash within the XML_ResumeParser function because XML_StopParser can stop/suspend an unstarted parser. | ||||
| CVE-2022-29278 | 1 Insyde | 1 Kernel | 2025-04-30 | 8.2 High |
| Incorrect pointer checks within the NvmExpressDxe driver can allow tampering with SMRAM and OS memory Incorrect pointer checks within the NvmExpressDxe driver can allow tampering with SMRAM and OS memory. This issue was discovered by Insyde during security review. Fixed in: Kernel 5.1: Version 05.17.23 Kernel 5.2: Version 05.27.23 Kernel 5.3: Version 05.36.23 Kernel 5.4: Version 05.44.23 Kernel 5.5: Version 05.52.23 https://www.insyde.com/security-pledge/SA-2022061 | ||||
| CVE-2024-4367 | 4 Debian, Mozilla, Open-xchange and 1 more | 10 Debian Linux, Firefox, Firefox Esr and 7 more | 2025-04-24 | 5.6 Medium |
| A type check was missing when handling fonts in PDF.js, which would allow arbitrary JavaScript execution in the PDF.js context. This vulnerability affects Firefox < 126, Firefox ESR < 115.11, and Thunderbird < 115.11. | ||||
| CVE-2022-21676 | 1 Socket | 1 Engine.io | 2025-04-23 | 7.5 High |
| Engine.IO is the implementation of transport-based cross-browser/cross-device bi-directional communication layer for Socket.IO. A specially crafted HTTP request can trigger an uncaught exception on the Engine.IO server, thus killing the Node.js process. This impacts all the users of the `engine.io` package starting from version `4.0.0`, including those who uses depending packages like `socket.io`. Versions prior to `4.0.0` are not impacted. A fix has been released for each major branch, namely `4.1.2` for the `4.x.x` branch, `5.2.1` for the `5.x.x` branch, and `6.1.1` for the `6.x.x` branch. There is no known workaround except upgrading to a safe version. | ||||
| CVE-2022-24880 | 1 Flask-session-captcha Project | 1 Flask-session-captcha | 2025-04-23 | 5.3 Medium |
| flask-session-captcha is a package which allows users to extend Flask by adding an image based captcha stored in a server side session. In versions prior to 1.2.1, he `captcha.validate()` function would return `None` if passed no value (e.g. by submitting an having an empty form). If implementing users were checking the return value to be **False**, the captcha verification check could be bypassed. Version 1.2.1 fixes the issue. Users can workaround the issue by not explicitly checking that the value is False. Checking the return value less explicitly should still work. | ||||
| CVE-2022-31093 | 1 Nextauth.js | 1 Next-auth | 2025-04-23 | 7.5 High |
| NextAuth.js is a complete open source authentication solution for Next.js applications. In affected versions an attacker can send a request to an app using NextAuth.js with an invalid `callbackUrl` query parameter, which internally is converted to a `URL` object. The URL instantiation would fail due to a malformed URL being passed into the constructor, causing it to throw an unhandled error which led to the **API route handler timing out and logging in to fail**. This has been remedied in versions 3.29.5 and 4.5.0. If for some reason you cannot upgrade, the workaround requires you to rely on Advanced Initialization. Please see the documentation for more. | ||||
| CVE-2022-31103 | 1 Lettersanitizer Project | 1 Lettersanitizer | 2025-04-23 | 7.5 High |
| lettersanitizer is a DOM-based HTML email sanitizer for in-browser email rendering. All versions of lettersanitizer below 1.0.2 are affected by a denial of service issue when processing a CSS at-rule `@keyframes`. This package is depended on by [react-letter](https://github.com/mat-sz/react-letter), therefore everyone using react-letter is also at risk. The problem has been patched in version 1.0.2. | ||||
| CVE-2022-36046 | 2 Nodejs, Vercel | 2 Node.js, Next.js | 2025-04-23 | 5.3 Medium |
| Next.js is a React framework that can provide building blocks to create web applications. All of the following must be true to be affected by this CVE: Next.js version 12.2.3, Node.js version above v15.0.0 being used with strict `unhandledRejection` exiting AND using next start or a [custom server](https://nextjs.org/docs/advanced-features/custom-server). Deployments on Vercel ([vercel.com](https://vercel.com/)) are not affected along with similar environments where `next-server` isn't being shared across requests. | ||||
| CVE-2022-39288 | 1 Fastify | 1 Fastify | 2025-04-23 | 7.5 High |
| fastify is a fast and low overhead web framework, for Node.js. Affected versions of fastify are subject to a denial of service via malicious use of the Content-Type header. An attacker can send an invalid Content-Type header that can cause the application to crash. This issue has been addressed in commit `fbb07e8d` and will be included in release version 4.8.1. Users are advised to upgrade. Users unable to upgrade may manually filter out http content with malicious Content-Type headers. | ||||