Total
229 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-40936 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix memregion leaks in devm_cxl_add_region() Move the mode verification to __create_region() before allocating the memregion to avoid the memregion leaks. | ||||
| CVE-2024-40932 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/exynos/vidi: fix memory leak in .get_modes() The duplicated EDID is never freed. Fix it. | ||||
| CVE-2024-38611 | 2025-05-04 | 5.1 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: media: i2c: et8ek8: Don't strip remove function when driver is builtin Using __exit for the remove function results in the remove callback being discarded with CONFIG_VIDEO_ET8EK8=y. When such a device gets unbound (e.g. using sysfs or hotplug), the driver is just removed without the cleanup being performed. This results in resource leaks. Fix it by compiling in the remove callback unconditionally. This also fixes a W=1 modpost warning: WARNING: modpost: drivers/media/i2c/et8ek8/et8ek8: section mismatch in reference: et8ek8_i2c_driver+0x10 (section: .data) -> et8ek8_remove (section: .exit.text) | ||||
| CVE-2024-38603 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drivers/perf: hisi: hns3: Actually use devm_add_action_or_reset() pci_alloc_irq_vectors() allocates an irq vector. When devm_add_action() fails, the irq vector is not freed, which leads to a memory leak. Replace the devm_add_action with devm_add_action_or_reset to ensure the irq vector can be destroyed when it fails. | ||||
| CVE-2024-38563 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix potential memory leakage when reading chip temperature Without this commit, reading chip temperature will cause memory leakage. | ||||
| CVE-2024-38539 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Fix kmemleak in rdma_core observed during blktests nvme/rdma use siw When running blktests nvme/rdma, the following kmemleak issue will appear. kmemleak: Kernel memory leak detector initialized (mempool available:36041) kmemleak: Automatic memory scanning thread started kmemleak: 2 new suspected memory leaks (see /sys/kernel/debug/kmemleak) kmemleak: 8 new suspected memory leaks (see /sys/kernel/debug/kmemleak) kmemleak: 17 new suspected memory leaks (see /sys/kernel/debug/kmemleak) kmemleak: 4 new suspected memory leaks (see /sys/kernel/debug/kmemleak) unreferenced object 0xffff88855da53400 (size 192): comm "rdma", pid 10630, jiffies 4296575922 hex dump (first 32 bytes): 37 00 00 00 00 00 00 00 c0 ff ff ff 1f 00 00 00 7............... 10 34 a5 5d 85 88 ff ff 10 34 a5 5d 85 88 ff ff .4.].....4.].... backtrace (crc 47f66721): [<ffffffff911251bd>] kmalloc_trace+0x30d/0x3b0 [<ffffffffc2640ff7>] alloc_gid_entry+0x47/0x380 [ib_core] [<ffffffffc2642206>] add_modify_gid+0x166/0x930 [ib_core] [<ffffffffc2643468>] ib_cache_update.part.0+0x6d8/0x910 [ib_core] [<ffffffffc2644e1a>] ib_cache_setup_one+0x24a/0x350 [ib_core] [<ffffffffc263949e>] ib_register_device+0x9e/0x3a0 [ib_core] [<ffffffffc2a3d389>] 0xffffffffc2a3d389 [<ffffffffc2688cd8>] nldev_newlink+0x2b8/0x520 [ib_core] [<ffffffffc2645fe3>] rdma_nl_rcv_msg+0x2c3/0x520 [ib_core] [<ffffffffc264648c>] rdma_nl_rcv_skb.constprop.0.isra.0+0x23c/0x3a0 [ib_core] [<ffffffff9270e7b5>] netlink_unicast+0x445/0x710 [<ffffffff9270f1f1>] netlink_sendmsg+0x761/0xc40 [<ffffffff9249db29>] __sys_sendto+0x3a9/0x420 [<ffffffff9249dc8c>] __x64_sys_sendto+0xdc/0x1b0 [<ffffffff92db0ad3>] do_syscall_64+0x93/0x180 [<ffffffff92e00126>] entry_SYSCALL_64_after_hwframe+0x71/0x79 The root cause: rdma_put_gid_attr is not called when sgid_attr is set to ERR_PTR(-ENODEV). | ||||
| CVE-2024-36956 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thermal/debugfs: Free all thermal zone debug memory on zone removal Because thermal_debug_tz_remove() does not free all memory allocated for thermal zone diagnostics, some of that memory becomes unreachable after freeing the thermal zone's struct thermal_debugfs object. Address this by making thermal_debug_tz_remove() free all of the memory in question. Cc :6.8+ <stable@vger.kernel.org> # 6.8+ | ||||
| CVE-2024-36955 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: intel-sdw-acpi: fix usage of device_get_named_child_node() The documentation for device_get_named_child_node() mentions this important point: " The caller is responsible for calling fwnode_handle_put() on the returned fwnode pointer. " Add fwnode_handle_put() to avoid a leaked reference. | ||||
| CVE-2024-36913 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Leak pages if set_memory_encrypted() fails In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. VMBus code could free decrypted pages if set_memory_encrypted()/decrypted() fails. Leak the pages if this happens. | ||||
| CVE-2024-36912 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Track decrypted status in vmbus_gpadl In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. In order to make sure callers of vmbus_establish_gpadl() and vmbus_teardown_gpadl() don't return decrypted/shared pages to allocators, add a field in struct vmbus_gpadl to keep track of the decryption status of the buffers. This will allow the callers to know if they should free or leak the pages. | ||||
| CVE-2024-36911 | 2025-05-04 | 4.4 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: hv_netvsc: Don't free decrypted memory In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. The netvsc driver could free decrypted/shared pages if set_memory_decrypted() fails. Check the decrypted field in the gpadl to decide whether to free the memory. | ||||
| CVE-2024-36910 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 6.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: uio_hv_generic: Don't free decrypted memory In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. The VMBus device UIO driver could free decrypted/shared pages if set_memory_decrypted() fails. Check the decrypted field in the gpadl to decide whether to free the memory. | ||||
| CVE-2024-36489 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tls: fix missing memory barrier in tls_init In tls_init(), a write memory barrier is missing, and store-store reordering may cause NULL dereference in tls_{setsockopt,getsockopt}. CPU0 CPU1 ----- ----- // In tls_init() // In tls_ctx_create() ctx = kzalloc() ctx->sk_proto = READ_ONCE(sk->sk_prot) -(1) // In update_sk_prot() WRITE_ONCE(sk->sk_prot, tls_prots) -(2) // In sock_common_setsockopt() READ_ONCE(sk->sk_prot)->setsockopt() // In tls_{setsockopt,getsockopt}() ctx->sk_proto->setsockopt() -(3) In the above scenario, when (1) and (2) are reordered, (3) can observe the NULL value of ctx->sk_proto, causing NULL dereference. To fix it, we rely on rcu_assign_pointer() which implies the release barrier semantic. By moving rcu_assign_pointer() after ctx->sk_proto is initialized, we can ensure that ctx->sk_proto are visible when changing sk->sk_prot. | ||||
| CVE-2024-31076 | 1 Redhat | 2 Enterprise Linux, Rhel Eus | 2025-05-04 | 5.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: genirq/cpuhotplug, x86/vector: Prevent vector leak during CPU offline The absence of IRQD_MOVE_PCNTXT prevents immediate effectiveness of interrupt affinity reconfiguration via procfs. Instead, the change is deferred until the next instance of the interrupt being triggered on the original CPU. When the interrupt next triggers on the original CPU, the new affinity is enforced within __irq_move_irq(). A vector is allocated from the new CPU, but the old vector on the original CPU remains and is not immediately reclaimed. Instead, apicd->move_in_progress is flagged, and the reclaiming process is delayed until the next trigger of the interrupt on the new CPU. Upon the subsequent triggering of the interrupt on the new CPU, irq_complete_move() adds a task to the old CPU's vector_cleanup list if it remains online. Subsequently, the timer on the old CPU iterates over its vector_cleanup list, reclaiming old vectors. However, a rare scenario arises if the old CPU is outgoing before the interrupt triggers again on the new CPU. In that case irq_force_complete_move() is not invoked on the outgoing CPU to reclaim the old apicd->prev_vector because the interrupt isn't currently affine to the outgoing CPU, and irq_needs_fixup() returns false. Even though __vector_schedule_cleanup() is later called on the new CPU, it doesn't reclaim apicd->prev_vector; instead, it simply resets both apicd->move_in_progress and apicd->prev_vector to 0. As a result, the vector remains unreclaimed in vector_matrix, leading to a CPU vector leak. To address this issue, move the invocation of irq_force_complete_move() before the irq_needs_fixup() call to reclaim apicd->prev_vector, if the interrupt is currently or used to be affine to the outgoing CPU. Additionally, reclaim the vector in __vector_schedule_cleanup() as well, following a warning message, although theoretically it should never see apicd->move_in_progress with apicd->prev_cpu pointing to an offline CPU. | ||||
| CVE-2024-26924 | 3 Debian, Linux, Redhat | 4 Debian Linux, Linux Kernel, Enterprise Linux and 1 more | 2025-05-04 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: do not free live element Pablo reports a crash with large batches of elements with a back-to-back add/remove pattern. Quoting Pablo: add_elem("00000000") timeout 100 ms ... add_elem("0000000X") timeout 100 ms del_elem("0000000X") <---------------- delete one that was just added ... add_elem("00005000") timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat. Looking at the remove function there is a chance that we will drop a rule that maps to a non-deactivated element. Removal happens in two steps, first we do a lookup for key k and return the to-be-removed element and mark it as inactive in the next generation. Then, in a second step, the element gets removed from the set/map. The _remove function does not work correctly if we have more than one element that share the same key. This can happen if we insert an element into a set when the set already holds an element with same key, but the element mapping to the existing key has timed out or is not active in the next generation. In such case its possible that removal will unmap the wrong element. If this happens, we will leak the non-deactivated element, it becomes unreachable. The element that got deactivated (and will be freed later) will remain reachable in the set data structure, this can result in a crash when such an element is retrieved during lookup (stale pointer). Add a check that the fully matching key does in fact map to the element that we have marked as inactive in the deactivation step. If not, we need to continue searching. Add a bug/warn trap at the end of the function as well, the remove function must not ever be called with an invisible/unreachable/non-existent element. v2: avoid uneeded temporary variable (Stefano) | ||||
| CVE-2024-26901 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: do_sys_name_to_handle(): use kzalloc() to fix kernel-infoleak syzbot identified a kernel information leak vulnerability in do_sys_name_to_handle() and issued the following report [1]. [1] "BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_user+0xbc/0x100 lib/usercopy.c:40 instrument_copy_to_user include/linux/instrumented.h:114 [inline] _copy_to_user+0xbc/0x100 lib/usercopy.c:40 copy_to_user include/linux/uaccess.h:191 [inline] do_sys_name_to_handle fs/fhandle.c:73 [inline] __do_sys_name_to_handle_at fs/fhandle.c:112 [inline] __se_sys_name_to_handle_at+0x949/0xb10 fs/fhandle.c:94 __x64_sys_name_to_handle_at+0xe4/0x140 fs/fhandle.c:94 ... Uninit was created at: slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768 slab_alloc_node mm/slub.c:3478 [inline] __kmem_cache_alloc_node+0x5c9/0x970 mm/slub.c:3517 __do_kmalloc_node mm/slab_common.c:1006 [inline] __kmalloc+0x121/0x3c0 mm/slab_common.c:1020 kmalloc include/linux/slab.h:604 [inline] do_sys_name_to_handle fs/fhandle.c:39 [inline] __do_sys_name_to_handle_at fs/fhandle.c:112 [inline] __se_sys_name_to_handle_at+0x441/0xb10 fs/fhandle.c:94 __x64_sys_name_to_handle_at+0xe4/0x140 fs/fhandle.c:94 ... Bytes 18-19 of 20 are uninitialized Memory access of size 20 starts at ffff888128a46380 Data copied to user address 0000000020000240" Per Chuck Lever's suggestion, use kzalloc() instead of kmalloc() to solve the problem. | ||||
| CVE-2024-26900 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md: fix kmemleak of rdev->serial If kobject_add() is fail in bind_rdev_to_array(), 'rdev->serial' will be alloc not be freed, and kmemleak occurs. unreferenced object 0xffff88815a350000 (size 49152): comm "mdadm", pid 789, jiffies 4294716910 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc f773277a): [<0000000058b0a453>] kmemleak_alloc+0x61/0xe0 [<00000000366adf14>] __kmalloc_large_node+0x15e/0x270 [<000000002e82961b>] __kmalloc_node.cold+0x11/0x7f [<00000000f206d60a>] kvmalloc_node+0x74/0x150 [<0000000034bf3363>] rdev_init_serial+0x67/0x170 [<0000000010e08fe9>] mddev_create_serial_pool+0x62/0x220 [<00000000c3837bf0>] bind_rdev_to_array+0x2af/0x630 [<0000000073c28560>] md_add_new_disk+0x400/0x9f0 [<00000000770e30ff>] md_ioctl+0x15bf/0x1c10 [<000000006cfab718>] blkdev_ioctl+0x191/0x3f0 [<0000000085086a11>] vfs_ioctl+0x22/0x60 [<0000000018b656fe>] __x64_sys_ioctl+0xba/0xe0 [<00000000e54e675e>] do_syscall_64+0x71/0x150 [<000000008b0ad622>] entry_SYSCALL_64_after_hwframe+0x6c/0x74 | ||||
| CVE-2024-26840 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cachefiles: fix memory leak in cachefiles_add_cache() The following memory leak was reported after unbinding /dev/cachefiles: ================================================================== unreferenced object 0xffff9b674176e3c0 (size 192): comm "cachefilesd2", pid 680, jiffies 4294881224 hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc ea38a44b): [<ffffffff8eb8a1a5>] kmem_cache_alloc+0x2d5/0x370 [<ffffffff8e917f86>] prepare_creds+0x26/0x2e0 [<ffffffffc002eeef>] cachefiles_determine_cache_security+0x1f/0x120 [<ffffffffc00243ec>] cachefiles_add_cache+0x13c/0x3a0 [<ffffffffc0025216>] cachefiles_daemon_write+0x146/0x1c0 [<ffffffff8ebc4a3b>] vfs_write+0xcb/0x520 [<ffffffff8ebc5069>] ksys_write+0x69/0xf0 [<ffffffff8f6d4662>] do_syscall_64+0x72/0x140 [<ffffffff8f8000aa>] entry_SYSCALL_64_after_hwframe+0x6e/0x76 ================================================================== Put the reference count of cache_cred in cachefiles_daemon_unbind() to fix the problem. And also put cache_cred in cachefiles_add_cache() error branch to avoid memory leaks. | ||||
| CVE-2024-26839 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Fix a memleak in init_credit_return When dma_alloc_coherent fails to allocate dd->cr_base[i].va, init_credit_return should deallocate dd->cr_base and dd->cr_base[i] that allocated before. Or those resources would be never freed and a memleak is triggered. | ||||
| CVE-2024-26834 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_flow_offload: release dst in case direct xmit path is used Direct xmit does not use it since it calls dev_queue_xmit() to send packets, hence it calls dst_release(). kmemleak reports: unreferenced object 0xffff88814f440900 (size 184): comm "softirq", pid 0, jiffies 4294951896 hex dump (first 32 bytes): 00 60 5b 04 81 88 ff ff 00 e6 e8 82 ff ff ff ff .`[............. 21 0b 50 82 ff ff ff ff 00 00 00 00 00 00 00 00 !.P............. backtrace (crc cb2bf5d6): [<000000003ee17107>] kmem_cache_alloc+0x286/0x340 [<0000000021a5de2c>] dst_alloc+0x43/0xb0 [<00000000f0671159>] rt_dst_alloc+0x2e/0x190 [<00000000fe5092c9>] __mkroute_output+0x244/0x980 [<000000005fb96fb0>] ip_route_output_flow+0xc0/0x160 [<0000000045367433>] nf_ip_route+0xf/0x30 [<0000000085da1d8e>] nf_route+0x2d/0x60 [<00000000d1ecd1cb>] nft_flow_route+0x171/0x6a0 [nft_flow_offload] [<00000000d9b2fb60>] nft_flow_offload_eval+0x4e8/0x700 [nft_flow_offload] [<000000009f447dbb>] expr_call_ops_eval+0x53/0x330 [nf_tables] [<00000000072e1be6>] nft_do_chain+0x17c/0x840 [nf_tables] [<00000000d0551029>] nft_do_chain_inet+0xa1/0x210 [nf_tables] [<0000000097c9d5c6>] nf_hook_slow+0x5b/0x160 [<0000000005eccab1>] ip_forward+0x8b6/0x9b0 [<00000000553a269b>] ip_rcv+0x221/0x230 [<00000000412872e5>] __netif_receive_skb_one_core+0xfe/0x110 | ||||