Total
1310 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-21683 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix bpf_sk_select_reuseport() memory leak As pointed out in the original comment, lookup in sockmap can return a TCP ESTABLISHED socket. Such TCP socket may have had SO_ATTACH_REUSEPORT_EBPF set before it was ESTABLISHED. In other words, a non-NULL sk_reuseport_cb does not imply a non-refcounted socket. Drop sk's reference in both error paths. unreferenced object 0xffff888101911800 (size 2048): comm "test_progs", pid 44109, jiffies 4297131437 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 80 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 9336483b): __kmalloc_noprof+0x3bf/0x560 __reuseport_alloc+0x1d/0x40 reuseport_alloc+0xca/0x150 reuseport_attach_prog+0x87/0x140 sk_reuseport_attach_bpf+0xc8/0x100 sk_setsockopt+0x1181/0x1990 do_sock_setsockopt+0x12b/0x160 __sys_setsockopt+0x7b/0xc0 __x64_sys_setsockopt+0x1b/0x30 do_syscall_64+0x93/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e | ||||
| CVE-2025-21661 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: virtuser: fix missing lookup table cleanups When a virtuser device is created via configfs and the probe fails due to an incorrect lookup table, the table is not removed. This prevents subsequent probe attempts from succeeding, even if the issue is corrected, unless the device is released. Additionally, cleanup is also needed in the less likely case of platform_device_register_full() failure. Besides, a consistent memory leak in lookup_table->dev_id was spotted using kmemleak by toggling the live state between 0 and 1 with a correct lookup table. Introduce gpio_virtuser_remove_lookup_table() as the counterpart to the existing gpio_virtuser_make_lookup_table() and call it from all necessary points to ensure proper cleanup. | ||||
| CVE-2024-58063 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtlwifi: fix memory leaks and invalid access at probe error path Deinitialize at reverse order when probe fails. When init_sw_vars fails, rtl_deinit_core should not be called, specially now that it destroys the rtl_wq workqueue. And call rtl_pci_deinit and deinit_sw_vars, otherwise, memory will be leaked. Remove pci_set_drvdata call as it will already be cleaned up by the core driver code and could lead to memory leaks too. cf. commit 8d450935ae7f ("wireless: rtlwifi: remove unnecessary pci_set_drvdata()") and commit 3d86b93064c7 ("rtlwifi: Fix PCI probe error path orphaned memory"). | ||||
| CVE-2024-57872 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: pltfrm: Dellocate HBA during ufshcd_pltfrm_remove() This will ensure that the scsi host is cleaned up properly using scsi_host_dev_release(). Otherwise, it may lead to memory leaks. | ||||
| CVE-2024-57841 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: fix memory leak in tcp_conn_request() If inet_csk_reqsk_queue_hash_add() return false, tcp_conn_request() will return without free the dst memory, which allocated in af_ops->route_req. Here is the kmemleak stack: unreferenced object 0xffff8881198631c0 (size 240): comm "softirq", pid 0, jiffies 4299266571 (age 1802.392s) hex dump (first 32 bytes): 00 10 9b 03 81 88 ff ff 80 98 da bc ff ff ff ff ................ 81 55 18 bb ff ff ff ff 00 00 00 00 00 00 00 00 .U.............. backtrace: [<ffffffffb93e8d4c>] kmem_cache_alloc+0x60c/0xa80 [<ffffffffba11b4c5>] dst_alloc+0x55/0x250 [<ffffffffba227bf6>] rt_dst_alloc+0x46/0x1d0 [<ffffffffba23050a>] __mkroute_output+0x29a/0xa50 [<ffffffffba23456b>] ip_route_output_key_hash+0x10b/0x240 [<ffffffffba2346bd>] ip_route_output_flow+0x1d/0x90 [<ffffffffba254855>] inet_csk_route_req+0x2c5/0x500 [<ffffffffba26b331>] tcp_conn_request+0x691/0x12c0 [<ffffffffba27bd08>] tcp_rcv_state_process+0x3c8/0x11b0 [<ffffffffba2965c6>] tcp_v4_do_rcv+0x156/0x3b0 [<ffffffffba299c98>] tcp_v4_rcv+0x1cf8/0x1d80 [<ffffffffba239656>] ip_protocol_deliver_rcu+0xf6/0x360 [<ffffffffba2399a6>] ip_local_deliver_finish+0xe6/0x1e0 [<ffffffffba239b8e>] ip_local_deliver+0xee/0x360 [<ffffffffba239ead>] ip_rcv+0xad/0x2f0 [<ffffffffba110943>] __netif_receive_skb_one_core+0x123/0x140 Call dst_release() to free the dst memory when inet_csk_reqsk_queue_hash_add() return false in tcp_conn_request(). | ||||
| CVE-2024-56779 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix nfs4_openowner leak when concurrent nfsd4_open occur The action force umount(umount -f) will attempt to kill all rpc_task even umount operation may ultimately fail if some files remain open. Consequently, if an action attempts to open a file, it can potentially send two rpc_task to nfs server. NFS CLIENT thread1 thread2 open("file") ... nfs4_do_open _nfs4_do_open _nfs4_open_and_get_state _nfs4_proc_open nfs4_run_open_task /* rpc_task1 */ rpc_run_task rpc_wait_for_completion_task umount -f nfs_umount_begin rpc_killall_tasks rpc_signal_task rpc_task1 been wakeup and return -512 _nfs4_do_open // while loop ... nfs4_run_open_task /* rpc_task2 */ rpc_run_task rpc_wait_for_completion_task While processing an open request, nfsd will first attempt to find or allocate an nfs4_openowner. If it finds an nfs4_openowner that is not marked as NFS4_OO_CONFIRMED, this nfs4_openowner will released. Since two rpc_task can attempt to open the same file simultaneously from the client to server, and because two instances of nfsd can run concurrently, this situation can lead to lots of memory leak. Additionally, when we echo 0 to /proc/fs/nfsd/threads, warning will be triggered. NFS SERVER nfsd1 nfsd2 echo 0 > /proc/fs/nfsd/threads nfsd4_open nfsd4_process_open1 find_or_alloc_open_stateowner // alloc oo1, stateid1 nfsd4_open nfsd4_process_open1 find_or_alloc_open_stateowner // find oo1, without NFS4_OO_CONFIRMED release_openowner unhash_openowner_locked list_del_init(&oo->oo_perclient) // cannot find this oo // from client, LEAK!!! alloc_stateowner // alloc oo2 nfsd4_process_open2 init_open_stateid // associate oo1 // with stateid1, stateid1 LEAK!!! nfs4_get_vfs_file // alloc nfsd_file1 and nfsd_file_mark1 // all LEAK!!! nfsd4_process_open2 ... write_threads ... nfsd_destroy_serv nfsd_shutdown_net nfs4_state_shutdown_net nfs4_state_destroy_net destroy_client __destroy_client // won't find oo1!!! nfsd_shutdown_generic nfsd_file_cache_shutdown kmem_cache_destroy for nfsd_file_slab and nfsd_file_mark_slab // bark since nfsd_file1 // and nfsd_file_mark1 // still alive ======================================================================= BUG nfsd_file (Not tainted): Objects remaining in nfsd_file on __kmem_cache_shutdown() ----------------------------------------------------------------------- Slab 0xffd4000004438a80 objects=34 used=1 fp=0xff11000110e2ad28 flags=0x17ffffc0000240(workingset|head|node=0|zone=2|lastcpupid=0x1fffff) CPU: 4 UID: 0 PID: 757 Comm: sh Not tainted 6.12.0-rc6+ #19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 Call Trace: <TASK> dum ---truncated--- | ||||
| CVE-2024-56775 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix handling of plane refcount [Why] The mechanism to backup and restore plane states doesn't maintain refcount, which can cause issues if the refcount of the plane changes in between backup and restore operations, such as memory leaks if the refcount was supposed to go down, or double frees / invalid memory accesses if the refcount was supposed to go up. [How] Cache and re-apply current refcount when restoring plane states. | ||||
| CVE-2024-56755 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs/fscache: Add a memory barrier for FSCACHE_VOLUME_CREATING In fscache_create_volume(), there is a missing memory barrier between the bit-clearing operation and the wake-up operation. This may cause a situation where, after a wake-up, the bit-clearing operation hasn't been detected yet, leading to an indefinite wait. The triggering process is as follows: [cookie1] [cookie2] [volume_work] fscache_perform_lookup fscache_create_volume fscache_perform_lookup fscache_create_volume fscache_create_volume_work cachefiles_acquire_volume clear_and_wake_up_bit test_and_set_bit test_and_set_bit goto maybe_wait goto no_wait In the above process, cookie1 and cookie2 has the same volume. When cookie1 enters the -no_wait- process, it will clear the bit and wake up the waiting process. If a barrier is missing, it may cause cookie2 to remain in the -wait- process indefinitely. In commit 3288666c7256 ("fscache: Use clear_and_wake_up_bit() in fscache_create_volume_work()"), barriers were added to similar operations in fscache_create_volume_work(), but fscache_create_volume() was missed. By combining the clear and wake operations into clear_and_wake_up_bit() to fix this issue. | ||||
| CVE-2024-56753 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx9: Add Cleaner Shader Deinitialization in gfx_v9_0 Module This commit addresses an omission in the previous patch related to the cleaner shader support for GFX9 hardware. Specifically, it adds the necessary deinitialization code for the cleaner shader in the gfx_v9_0_sw_fini function. The added line amdgpu_gfx_cleaner_shader_sw_fini(adev); ensures that any allocated resources for the cleaner shader are freed correctly, avoiding potential memory leaks and ensuring that the GPU state is clean for the next initialization sequence. | ||||
| CVE-2024-56729 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-01 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: Initialize cfid->tcon before performing network ops Avoid leaking a tcon ref when a lease break races with opening the cached directory. Processing the leak break might take a reference to the tcon in cached_dir_lease_break() and then fail to release the ref in cached_dir_offload_close, since cfid->tcon is still NULL. | ||||
| CVE-2024-56720 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Several fixes to bpf_msg_pop_data Several fixes to bpf_msg_pop_data, 1. In sk_msg_shift_left, we should put_page 2. if (len == 0), return early is better 3. pop the entire sk_msg (last == msg->sg.size) should be supported 4. Fix for the value of variable "a" 5. In sk_msg_shift_left, after shifting, i has already pointed to the next element. Addtional sk_msg_iter_var_next may result in BUG. | ||||
| CVE-2024-56715 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ionic: Fix netdev notifier unregister on failure If register_netdev() fails, then the driver leaks the netdev notifier. Fix this by calling ionic_lif_unregister() on register_netdev() failure. This will also call ionic_lif_unregister_phc() if it has already been registered. | ||||
| CVE-2024-56668 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix qi_batch NULL pointer with nested parent domain The qi_batch is allocated when assigning cache tag for a domain. While for nested parent domain, it is missed. Hence, when trying to map pages to the nested parent, NULL dereference occurred. Also, there is potential memleak since there is no lock around domain->qi_batch allocation. To solve it, add a helper for qi_batch allocation, and call it in both the __cache_tag_assign_domain() and __cache_tag_assign_parent_domain(). BUG: kernel NULL pointer dereference, address: 0000000000000200 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 8104795067 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 223 UID: 0 PID: 4357 Comm: qemu-system-x86 Not tainted 6.13.0-rc1-00028-g4b50c3c3b998-dirty #2632 Call Trace: ? __die+0x24/0x70 ? page_fault_oops+0x80/0x150 ? do_user_addr_fault+0x63/0x7b0 ? exc_page_fault+0x7c/0x220 ? asm_exc_page_fault+0x26/0x30 ? cache_tag_flush_range_np+0x13c/0x260 intel_iommu_iotlb_sync_map+0x1a/0x30 iommu_map+0x61/0xf0 batch_to_domain+0x188/0x250 iopt_area_fill_domains+0x125/0x320 ? rcu_is_watching+0x11/0x50 iopt_map_pages+0x63/0x100 iopt_map_common.isra.0+0xa7/0x190 iopt_map_user_pages+0x6a/0x80 iommufd_ioas_map+0xcd/0x1d0 iommufd_fops_ioctl+0x118/0x1c0 __x64_sys_ioctl+0x93/0xc0 do_syscall_64+0x71/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e | ||||
| CVE-2024-56632 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix the memleak while create new ctrl failed Now while we create new ctrl failed, we have not free the tagset occupied by admin_q, here try to fix it. | ||||
| CVE-2024-56613 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched/numa: fix memory leak due to the overwritten vma->numab_state [Problem Description] When running the hackbench program of LTP, the following memory leak is reported by kmemleak. # /opt/ltp/testcases/bin/hackbench 20 thread 1000 Running with 20*40 (== 800) tasks. # dmesg | grep kmemleak ... kmemleak: 480 new suspected memory leaks (see /sys/kernel/debug/kmemleak) kmemleak: 665 new suspected memory leaks (see /sys/kernel/debug/kmemleak) # cat /sys/kernel/debug/kmemleak unreferenced object 0xffff888cd8ca2c40 (size 64): comm "hackbench", pid 17142, jiffies 4299780315 hex dump (first 32 bytes): ac 74 49 00 01 00 00 00 4c 84 49 00 01 00 00 00 .tI.....L.I..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc bff18fd4): [<ffffffff81419a89>] __kmalloc_cache_noprof+0x2f9/0x3f0 [<ffffffff8113f715>] task_numa_work+0x725/0xa00 [<ffffffff8110f878>] task_work_run+0x58/0x90 [<ffffffff81ddd9f8>] syscall_exit_to_user_mode+0x1c8/0x1e0 [<ffffffff81dd78d5>] do_syscall_64+0x85/0x150 [<ffffffff81e0012b>] entry_SYSCALL_64_after_hwframe+0x76/0x7e ... This issue can be consistently reproduced on three different servers: * a 448-core server * a 256-core server * a 192-core server [Root Cause] Since multiple threads are created by the hackbench program (along with the command argument 'thread'), a shared vma might be accessed by two or more cores simultaneously. When two or more cores observe that vma->numab_state is NULL at the same time, vma->numab_state will be overwritten. Although current code ensures that only one thread scans the VMAs in a single 'numa_scan_period', there might be a chance for another thread to enter in the next 'numa_scan_period' while we have not gotten till numab_state allocation [1]. Note that the command `/opt/ltp/testcases/bin/hackbench 50 process 1000` cannot the reproduce the issue. It is verified with 200+ test runs. [Solution] Use the cmpxchg atomic operation to ensure that only one thread executes the vma->numab_state assignment. [1] https://lore.kernel.org/lkml/1794be3c-358c-4cdc-a43d-a1f841d91ef7@amd.com/ | ||||
| CVE-2024-56542 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix a memleak issue when driver is removed Running "modprobe amdgpu" the second time (followed by a modprobe -r amdgpu) causes a call trace like: [ 845.212163] Memory manager not clean during takedown. [ 845.212170] WARNING: CPU: 4 PID: 2481 at drivers/gpu/drm/drm_mm.c:999 drm_mm_takedown+0x2b/0x40 [ 845.212177] Modules linked in: amdgpu(OE-) amddrm_ttm_helper(OE) amddrm_buddy(OE) amdxcp(OE) amd_sched(OE) drm_exec drm_suballoc_helper drm_display_helper i2c_algo_bit amdttm(OE) amdkcl(OE) cec rc_core sunrpc qrtr intel_rapl_msr intel_rapl_common snd_hda_codec_hdmi edac_mce_amd snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_usb_audio snd_hda_codec snd_usbmidi_lib kvm_amd snd_hda_core snd_ump mc snd_hwdep kvm snd_pcm snd_seq_midi snd_seq_midi_event irqbypass crct10dif_pclmul snd_rawmidi polyval_clmulni polyval_generic ghash_clmulni_intel sha256_ssse3 sha1_ssse3 snd_seq aesni_intel crypto_simd snd_seq_device cryptd snd_timer mfd_aaeon asus_nb_wmi eeepc_wmi joydev asus_wmi snd ledtrig_audio sparse_keymap ccp wmi_bmof input_leds k10temp i2c_piix4 platform_profile rapl soundcore gpio_amdpt mac_hid binfmt_misc msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs ip_tables x_tables autofs4 hid_logitech_hidpp hid_logitech_dj hid_generic usbhid hid ahci xhci_pci igc crc32_pclmul libahci xhci_pci_renesas video [ 845.212284] wmi [last unloaded: amddrm_ttm_helper(OE)] [ 845.212290] CPU: 4 PID: 2481 Comm: modprobe Tainted: G W OE 6.8.0-31-generic #31-Ubuntu [ 845.212296] RIP: 0010:drm_mm_takedown+0x2b/0x40 [ 845.212300] Code: 1f 44 00 00 48 8b 47 38 48 83 c7 38 48 39 f8 75 09 31 c0 31 ff e9 90 2e 86 00 55 48 c7 c7 d0 f6 8e 8a 48 89 e5 e8 f5 db 45 ff <0f> 0b 5d 31 c0 31 ff e9 74 2e 86 00 66 0f 1f 84 00 00 00 00 00 90 [ 845.212302] RSP: 0018:ffffb11302127ae0 EFLAGS: 00010246 [ 845.212305] RAX: 0000000000000000 RBX: ffff92aa5020fc08 RCX: 0000000000000000 [ 845.212307] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 845.212309] RBP: ffffb11302127ae0 R08: 0000000000000000 R09: 0000000000000000 [ 845.212310] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000004 [ 845.212312] R13: ffff92aa50200000 R14: ffff92aa5020fb10 R15: ffff92aa5020faa0 [ 845.212313] FS: 0000707dd7c7c080(0000) GS:ffff92b93de00000(0000) knlGS:0000000000000000 [ 845.212316] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 845.212318] CR2: 00007d48b0aee200 CR3: 0000000115a58000 CR4: 0000000000f50ef0 [ 845.212320] PKRU: 55555554 [ 845.212321] Call Trace: [ 845.212323] <TASK> [ 845.212328] ? show_regs+0x6d/0x80 [ 845.212333] ? __warn+0x89/0x160 [ 845.212339] ? drm_mm_takedown+0x2b/0x40 [ 845.212344] ? report_bug+0x17e/0x1b0 [ 845.212350] ? handle_bug+0x51/0xa0 [ 845.212355] ? exc_invalid_op+0x18/0x80 [ 845.212359] ? asm_exc_invalid_op+0x1b/0x20 [ 845.212366] ? drm_mm_takedown+0x2b/0x40 [ 845.212371] amdgpu_gtt_mgr_fini+0xa9/0x130 [amdgpu] [ 845.212645] amdgpu_ttm_fini+0x264/0x340 [amdgpu] [ 845.212770] amdgpu_bo_fini+0x2e/0xc0 [amdgpu] [ 845.212894] gmc_v12_0_sw_fini+0x2a/0x40 [amdgpu] [ 845.213036] amdgpu_device_fini_sw+0x11a/0x590 [amdgpu] [ 845.213159] amdgpu_driver_release_kms+0x16/0x40 [amdgpu] [ 845.213302] devm_drm_dev_init_release+0x5e/0x90 [ 845.213305] devm_action_release+0x12/0x30 [ 845.213308] release_nodes+0x42/0xd0 [ 845.213311] devres_release_all+0x97/0xe0 [ 845.213314] device_unbind_cleanup+0x12/0x80 [ 845.213317] device_release_driver_internal+0x230/0x270 [ 845.213319] ? srso_alias_return_thunk+0x5/0xfbef5 This is caused by lost memory during early init phase. First time driver is removed, memory is freed but when second time the driver is inserted, VBIOS dmub is not active, since the PSP policy is to retain the driver loaded version on subsequent warm boots. Hence, communication with VBIOS DMUB fails. Fix this by aborting further comm ---truncated--- | ||||
| CVE-2024-56534 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: isofs: avoid memory leak in iocharset A memleak was found as below: unreferenced object 0xffff0000d10164d8 (size 8): comm "pool-udisksd", pid 108217, jiffies 4295408555 hex dump (first 8 bytes): 75 74 66 38 00 cc cc cc utf8.... backtrace (crc de430d31): [<ffff800081046e6c>] kmemleak_alloc+0xb8/0xc8 [<ffff8000803e6c3c>] __kmalloc_node_track_caller_noprof+0x380/0x474 [<ffff800080363b74>] kstrdup+0x70/0xfc [<ffff80007bb3c6a4>] isofs_parse_param+0x228/0x2c0 [isofs] [<ffff8000804d7f68>] vfs_parse_fs_param+0xf4/0x164 [<ffff8000804d8064>] vfs_parse_fs_string+0x8c/0xd4 [<ffff8000804d815c>] vfs_parse_monolithic_sep+0xb0/0xfc [<ffff8000804d81d8>] generic_parse_monolithic+0x30/0x3c [<ffff8000804d8bfc>] parse_monolithic_mount_data+0x40/0x4c [<ffff8000804b6a64>] path_mount+0x6c4/0x9ec [<ffff8000804b6e38>] do_mount+0xac/0xc4 [<ffff8000804b7494>] __arm64_sys_mount+0x16c/0x2b0 [<ffff80008002b8dc>] invoke_syscall+0x7c/0x104 [<ffff80008002ba44>] el0_svc_common.constprop.1+0xe0/0x104 [<ffff80008002ba94>] do_el0_svc+0x2c/0x38 [<ffff800081041108>] el0_svc+0x3c/0x1b8 The opt->iocharset is freed inside the isofs_fill_super function, But there may be situations where it's not possible to enter this function. For example, in the get_tree_bdev_flags function,when encountering the situation where "Can't mount, would change RO state," In such a case, isofs_fill_super will not have the opportunity to be called,which means that opt->iocharset will not have the chance to be freed,ultimately leading to a memory leak. Let's move the memory freeing of opt->iocharset into isofs_free_fc function. | ||||
| CVE-2024-53215 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: fix miss destroy percpu_counter in svc_rdma_proc_init() There's issue as follows: RPC: Registered rdma transport module. RPC: Registered rdma backchannel transport module. RPC: Unregistered rdma transport module. RPC: Unregistered rdma backchannel transport module. BUG: unable to handle page fault for address: fffffbfff80c609a PGD 123fee067 P4D 123fee067 PUD 123fea067 PMD 10c624067 PTE 0 Oops: Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI RIP: 0010:percpu_counter_destroy_many+0xf7/0x2a0 Call Trace: <TASK> __die+0x1f/0x70 page_fault_oops+0x2cd/0x860 spurious_kernel_fault+0x36/0x450 do_kern_addr_fault+0xca/0x100 exc_page_fault+0x128/0x150 asm_exc_page_fault+0x26/0x30 percpu_counter_destroy_many+0xf7/0x2a0 mmdrop+0x209/0x350 finish_task_switch.isra.0+0x481/0x840 schedule_tail+0xe/0xd0 ret_from_fork+0x23/0x80 ret_from_fork_asm+0x1a/0x30 </TASK> If register_sysctl() return NULL, then svc_rdma_proc_cleanup() will not destroy the percpu counters which init in svc_rdma_proc_init(). If CONFIG_HOTPLUG_CPU is enabled, residual nodes may be in the 'percpu_counters' list. The above issue may occur once the module is removed. If the CONFIG_HOTPLUG_CPU configuration is not enabled, memory leakage occurs. To solve above issue just destroy all percpu counters when register_sysctl() return NULL. | ||||
| CVE-2024-53210 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/iucv: MSG_PEEK causes memory leak in iucv_sock_destruct() Passing MSG_PEEK flag to skb_recv_datagram() increments skb refcount (skb->users) and iucv_sock_recvmsg() does not decrement skb refcount at exit. This results in skb memory leak in skb_queue_purge() and WARN_ON in iucv_sock_destruct() during socket close. To fix this decrease skb refcount by one if MSG_PEEK is set in order to prevent memory leak and WARN_ON. WARNING: CPU: 2 PID: 6292 at net/iucv/af_iucv.c:286 iucv_sock_destruct+0x144/0x1a0 [af_iucv] CPU: 2 PID: 6292 Comm: afiucv_test_msg Kdump: loaded Tainted: G W 6.10.0-rc7 #1 Hardware name: IBM 3931 A01 704 (z/VM 7.3.0) Call Trace: [<001587c682c4aa98>] iucv_sock_destruct+0x148/0x1a0 [af_iucv] [<001587c682c4a9d0>] iucv_sock_destruct+0x80/0x1a0 [af_iucv] [<001587c704117a32>] __sk_destruct+0x52/0x550 [<001587c704104a54>] __sock_release+0xa4/0x230 [<001587c704104c0c>] sock_close+0x2c/0x40 [<001587c702c5f5a8>] __fput+0x2e8/0x970 [<001587c7024148c4>] task_work_run+0x1c4/0x2c0 [<001587c7023b0716>] do_exit+0x996/0x1050 [<001587c7023b13aa>] do_group_exit+0x13a/0x360 [<001587c7023b1626>] __s390x_sys_exit_group+0x56/0x60 [<001587c7022bccca>] do_syscall+0x27a/0x380 [<001587c7049a6a0c>] __do_syscall+0x9c/0x160 [<001587c7049ce8a8>] system_call+0x70/0x98 Last Breaking-Event-Address: [<001587c682c4a9d4>] iucv_sock_destruct+0x84/0x1a0 [af_iucv] | ||||
| CVE-2024-53198 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xen: Fix the issue of resource not being properly released in xenbus_dev_probe() This patch fixes an issue in the function xenbus_dev_probe(). In the xenbus_dev_probe() function, within the if (err) branch at line 313, the program incorrectly returns err directly without releasing the resources allocated by err = drv->probe(dev, id). As the return value is non-zero, the upper layers assume the processing logic has failed. However, the probe operation was performed earlier without a corresponding remove operation. Since the probe actually allocates resources, failing to perform the remove operation could lead to problems. To fix this issue, we followed the resource release logic of the xenbus_dev_remove() function by adding a new block fail_remove before the fail_put block. After entering the branch if (err) at line 313, the function will use a goto statement to jump to the fail_remove block, ensuring that the previously acquired resources are correctly released, thus preventing the reference count leak. This bug was identified by an experimental static analysis tool developed by our team. The tool specializes in analyzing reference count operations and detecting potential issues where resources are not properly managed. In this case, the tool flagged the missing release operation as a potential problem, which led to the development of this patch. | ||||