Total
12330 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2021-47395 | 2025-05-04 | 5.5 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: mac80211: limit injected vht mcs/nss in ieee80211_parse_tx_radiotap Limit max values for vht mcs and nss in ieee80211_parse_tx_radiotap routine in order to fix the following warning reported by syzbot: WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_rate_set_vht include/net/mac80211.h:989 [inline] WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244 Modules linked in: CPU: 0 PID: 10717 Comm: syz-executor.5 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:ieee80211_rate_set_vht include/net/mac80211.h:989 [inline] RIP: 0010:ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244 RSP: 0018:ffffc9000186f3e8 EFLAGS: 00010216 RAX: 0000000000000618 RBX: ffff88804ef76500 RCX: ffffc900143a5000 RDX: 0000000000040000 RSI: ffffffff888f478e RDI: 0000000000000003 RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000100 R10: ffffffff888f46f9 R11: 0000000000000000 R12: 00000000fffffff8 R13: ffff88804ef7653c R14: 0000000000000001 R15: 0000000000000004 FS: 00007fbf5718f700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2de23000 CR3: 000000006a671000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 Call Trace: ieee80211_monitor_select_queue+0xa6/0x250 net/mac80211/iface.c:740 netdev_core_pick_tx+0x169/0x2e0 net/core/dev.c:4089 __dev_queue_xmit+0x6f9/0x3710 net/core/dev.c:4165 __bpf_tx_skb net/core/filter.c:2114 [inline] __bpf_redirect_no_mac net/core/filter.c:2139 [inline] __bpf_redirect+0x5ba/0xd20 net/core/filter.c:2162 ____bpf_clone_redirect net/core/filter.c:2429 [inline] bpf_clone_redirect+0x2ae/0x420 net/core/filter.c:2401 bpf_prog_eeb6f53a69e5c6a2+0x59/0x234 bpf_dispatcher_nop_func include/linux/bpf.h:717 [inline] __bpf_prog_run include/linux/filter.h:624 [inline] bpf_prog_run include/linux/filter.h:631 [inline] bpf_test_run+0x381/0xa30 net/bpf/test_run.c:119 bpf_prog_test_run_skb+0xb84/0x1ee0 net/bpf/test_run.c:663 bpf_prog_test_run kernel/bpf/syscall.c:3307 [inline] __sys_bpf+0x2137/0x5df0 kernel/bpf/syscall.c:4605 __do_sys_bpf kernel/bpf/syscall.c:4691 [inline] __se_sys_bpf kernel/bpf/syscall.c:4689 [inline] __x64_sys_bpf+0x75/0xb0 kernel/bpf/syscall.c:4689 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 | ||||
| CVE-2021-47227 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Prevent state corruption in __fpu__restore_sig() The non-compacted slowpath uses __copy_from_user() and copies the entire user buffer into the kernel buffer, verbatim. This means that the kernel buffer may now contain entirely invalid state on which XRSTOR will #GP. validate_user_xstate_header() can detect some of that corruption, but that leaves the onus on callers to clear the buffer. Prior to XSAVES support, it was possible just to reinitialize the buffer, completely, but with supervisor states that is not longer possible as the buffer clearing code split got it backwards. Fixing that is possible but not corrupting the state in the first place is more robust. Avoid corruption of the kernel XSAVE buffer by using copy_user_to_xstate() which validates the XSAVE header contents before copying the actual states to the kernel. copy_user_to_xstate() was previously only called for compacted-format kernel buffers, but it works for both compacted and non-compacted forms. Using it for the non-compacted form is slower because of multiple __copy_from_user() operations, but that cost is less important than robust code in an already slow path. [ Changelog polished by Dave Hansen ] | ||||
| CVE-2021-47215 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: kTLS, Fix crash in RX resync flow For the TLS RX resync flow, we maintain a list of TLS contexts that require some attention, to communicate their resync information to the HW. Here we fix list corruptions, by protecting the entries against movements coming from resync_handle_seq_match(), until their resync handling in napi is fully completed. | ||||
| CVE-2021-47210 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: tipd: Remove WARN_ON in tps6598x_block_read Calling tps6598x_block_read with a higher than allowed len can be handled by just returning an error. There's no need to crash systems with panic-on-warn enabled. | ||||
| CVE-2021-47203 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix list_add() corruption in lpfc_drain_txq() When parsing the txq list in lpfc_drain_txq(), the driver attempts to pass the requests to the adapter. If such an attempt fails, a local "fail_msg" string is set and a log message output. The job is then added to a completions list for cancellation. Processing of any further jobs from the txq list continues, but since "fail_msg" remains set, jobs are added to the completions list regardless of whether a wqe was passed to the adapter. If successfully added to txcmplq, jobs are added to both lists resulting in list corruption. Fix by clearing the fail_msg string after adding a job to the completions list. This stops the subsequent jobs from being added to the completions list unless they had an appropriate failure. | ||||
| CVE-2021-47201 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iavf: free q_vectors before queues in iavf_disable_vf iavf_free_queues() clears adapter->num_active_queues, which iavf_free_q_vectors() relies on, so swap the order of these two function calls in iavf_disable_vf(). This resolves a panic encountered when the interface is disabled and then later brought up again after PF communication is restored. | ||||
| CVE-2021-47170 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: usbfs: Don't WARN about excessively large memory allocations Syzbot found that the kernel generates a WARNing if the user tries to submit a bulk transfer through usbfs with a buffer that is way too large. This isn't a bug in the kernel; it's merely an invalid request from the user and the usbfs code does handle it correctly. In theory the same thing can happen with async transfers, or with the packet descriptor table for isochronous transfers. To prevent the MM subsystem from complaining about these bad allocation requests, add the __GFP_NOWARN flag to the kmalloc calls for these buffers. | ||||
| CVE-2021-47129 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 4.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: skip expectations for confirmed conntrack nft_ct_expect_obj_eval() calls nf_ct_ext_add() for a confirmed conntrack entry. However, nf_ct_ext_add() can only be called for !nf_ct_is_confirmed(). [ 1825.349056] WARNING: CPU: 0 PID: 1279 at net/netfilter/nf_conntrack_extend.c:48 nf_ct_xt_add+0x18e/0x1a0 [nf_conntrack] [ 1825.351391] RIP: 0010:nf_ct_ext_add+0x18e/0x1a0 [nf_conntrack] [ 1825.351493] Code: 41 5c 41 5d 41 5e 41 5f c3 41 bc 0a 00 00 00 e9 15 ff ff ff ba 09 00 00 00 31 f6 4c 89 ff e8 69 6c 3d e9 eb 96 45 31 ed eb cd <0f> 0b e9 b1 fe ff ff e8 86 79 14 e9 eb bf 0f 1f 40 00 0f 1f 44 00 [ 1825.351721] RSP: 0018:ffffc90002e1f1e8 EFLAGS: 00010202 [ 1825.351790] RAX: 000000000000000e RBX: ffff88814f5783c0 RCX: ffffffffc0e4f887 [ 1825.351881] RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88814f578440 [ 1825.351971] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff88814f578447 [ 1825.352060] R10: ffffed1029eaf088 R11: 0000000000000001 R12: ffff88814f578440 [ 1825.352150] R13: ffff8882053f3a00 R14: 0000000000000000 R15: 0000000000000a20 [ 1825.352240] FS: 00007f992261c900(0000) GS:ffff889faec00000(0000) knlGS:0000000000000000 [ 1825.352343] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1825.352417] CR2: 000056070a4d1158 CR3: 000000015efe0000 CR4: 0000000000350ee0 [ 1825.352508] Call Trace: [ 1825.352544] nf_ct_helper_ext_add+0x10/0x60 [nf_conntrack] [ 1825.352641] nft_ct_expect_obj_eval+0x1b8/0x1e0 [nft_ct] [ 1825.352716] nft_do_chain+0x232/0x850 [nf_tables] Add the ct helper extension only for unconfirmed conntrack. Skip rule evaluation if the ct helper extension does not exist. Thus, you can only create expectations from the first packet. It should be possible to remove this limitation by adding a new action to attach a generic ct helper to the first packet. Then, use this ct helper extension from follow up packets to create the ct expectation. While at it, add a missing check to skip the template conntrack too and remove check for IPCT_UNTRACK which is implicit to !ct. | ||||
| CVE-2021-47117 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix bug on in ext4_es_cache_extent as ext4_split_extent_at failed We got follow bug_on when run fsstress with injecting IO fault: [130747.323114] kernel BUG at fs/ext4/extents_status.c:762! [130747.323117] Internal error: Oops - BUG: 0 [#1] SMP ...... [130747.334329] Call trace: [130747.334553] ext4_es_cache_extent+0x150/0x168 [ext4] [130747.334975] ext4_cache_extents+0x64/0xe8 [ext4] [130747.335368] ext4_find_extent+0x300/0x330 [ext4] [130747.335759] ext4_ext_map_blocks+0x74/0x1178 [ext4] [130747.336179] ext4_map_blocks+0x2f4/0x5f0 [ext4] [130747.336567] ext4_mpage_readpages+0x4a8/0x7a8 [ext4] [130747.336995] ext4_readpage+0x54/0x100 [ext4] [130747.337359] generic_file_buffered_read+0x410/0xae8 [130747.337767] generic_file_read_iter+0x114/0x190 [130747.338152] ext4_file_read_iter+0x5c/0x140 [ext4] [130747.338556] __vfs_read+0x11c/0x188 [130747.338851] vfs_read+0x94/0x150 [130747.339110] ksys_read+0x74/0xf0 This patch's modification is according to Jan Kara's suggestion in: https://patchwork.ozlabs.org/project/linux-ext4/patch/20210428085158.3728201-1-yebin10@huawei.com/ "I see. Now I understand your patch. Honestly, seeing how fragile is trying to fix extent tree after split has failed in the middle, I would probably go even further and make sure we fix the tree properly in case of ENOSPC and EDQUOT (those are easily user triggerable). Anything else indicates a HW problem or fs corruption so I'd rather leave the extent tree as is and don't try to fix it (which also means we will not create overlapping extents)." | ||||
| CVE-2021-47114 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix data corruption by fallocate When fallocate punches holes out of inode size, if original isize is in the middle of last cluster, then the part from isize to the end of the cluster will be zeroed with buffer write, at that time isize is not yet updated to match the new size, if writeback is kicked in, it will invoke ocfs2_writepage()->block_write_full_page() where the pages out of inode size will be dropped. That will cause file corruption. Fix this by zero out eof blocks when extending the inode size. Running the following command with qemu-image 4.2.1 can get a corrupted coverted image file easily. qemu-img convert -p -t none -T none -f qcow2 $qcow_image \ -O qcow2 -o compat=1.1 $qcow_image.conv The usage of fallocate in qemu is like this, it first punches holes out of inode size, then extend the inode size. fallocate(11, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 2276196352, 65536) = 0 fallocate(11, 0, 2276196352, 65536) = 0 v1: https://www.spinics.net/lists/linux-fsdevel/msg193999.html v2: https://lore.kernel.org/linux-fsdevel/20210525093034.GB4112@quack2.suse.cz/T/ | ||||
| CVE-2021-47099 | 2 Linux, Redhat | 4 Linux Kernel, Enterprise Linux, Rhel Eus and 1 more | 2025-05-04 | 6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: veth: ensure skb entering GRO are not cloned. After commit d3256efd8e8b ("veth: allow enabling NAPI even without XDP"), if GRO is enabled on a veth device and TSO is disabled on the peer device, TCP skbs will go through the NAPI callback. If there is no XDP program attached, the veth code does not perform any share check, and shared/cloned skbs could enter the GRO engine. Ignat reported a BUG triggered later-on due to the above condition: [ 53.970529][ C1] kernel BUG at net/core/skbuff.c:3574! [ 53.981755][ C1] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI [ 53.982634][ C1] CPU: 1 PID: 19 Comm: ksoftirqd/1 Not tainted 5.16.0-rc5+ #25 [ 53.982634][ C1] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [ 53.982634][ C1] RIP: 0010:skb_shift+0x13ef/0x23b0 [ 53.982634][ C1] Code: ea 03 0f b6 04 02 48 89 fa 83 e2 07 38 d0 7f 08 84 c0 0f 85 41 0c 00 00 41 80 7f 02 00 4d 8d b5 d0 00 00 00 0f 85 74 f5 ff ff <0f> 0b 4d 8d 77 20 be 04 00 00 00 4c 89 44 24 78 4c 89 f7 4c 89 8c [ 53.982634][ C1] RSP: 0018:ffff8881008f7008 EFLAGS: 00010246 [ 53.982634][ C1] RAX: 0000000000000000 RBX: ffff8881180b4c80 RCX: 0000000000000000 [ 53.982634][ C1] RDX: 0000000000000002 RSI: ffff8881180b4d3c RDI: ffff88810bc9cac2 [ 53.982634][ C1] RBP: ffff8881008f70b8 R08: ffff8881180b4cf4 R09: ffff8881180b4cf0 [ 53.982634][ C1] R10: ffffed1022999e5c R11: 0000000000000002 R12: 0000000000000590 [ 53.982634][ C1] R13: ffff88810f940c80 R14: ffff88810f940d50 R15: ffff88810bc9cac0 [ 53.982634][ C1] FS: 0000000000000000(0000) GS:ffff888235880000(0000) knlGS:0000000000000000 [ 53.982634][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.982634][ C1] CR2: 00007ff5f9b86680 CR3: 0000000108ce8004 CR4: 0000000000170ee0 [ 53.982634][ C1] Call Trace: [ 53.982634][ C1] <TASK> [ 53.982634][ C1] tcp_sacktag_walk+0xaba/0x18e0 [ 53.982634][ C1] tcp_sacktag_write_queue+0xe7b/0x3460 [ 53.982634][ C1] tcp_ack+0x2666/0x54b0 [ 53.982634][ C1] tcp_rcv_established+0x4d9/0x20f0 [ 53.982634][ C1] tcp_v4_do_rcv+0x551/0x810 [ 53.982634][ C1] tcp_v4_rcv+0x22ed/0x2ed0 [ 53.982634][ C1] ip_protocol_deliver_rcu+0x96/0xaf0 [ 53.982634][ C1] ip_local_deliver_finish+0x1e0/0x2f0 [ 53.982634][ C1] ip_sublist_rcv_finish+0x211/0x440 [ 53.982634][ C1] ip_list_rcv_finish.constprop.0+0x424/0x660 [ 53.982634][ C1] ip_list_rcv+0x2c8/0x410 [ 53.982634][ C1] __netif_receive_skb_list_core+0x65c/0x910 [ 53.982634][ C1] netif_receive_skb_list_internal+0x5f9/0xcb0 [ 53.982634][ C1] napi_complete_done+0x188/0x6e0 [ 53.982634][ C1] gro_cell_poll+0x10c/0x1d0 [ 53.982634][ C1] __napi_poll+0xa1/0x530 [ 53.982634][ C1] net_rx_action+0x567/0x1270 [ 53.982634][ C1] __do_softirq+0x28a/0x9ba [ 53.982634][ C1] run_ksoftirqd+0x32/0x60 [ 53.982634][ C1] smpboot_thread_fn+0x559/0x8c0 [ 53.982634][ C1] kthread+0x3b9/0x490 [ 53.982634][ C1] ret_from_fork+0x22/0x30 [ 53.982634][ C1] </TASK> Address the issue by skipping the GRO stage for shared or cloned skbs. To reduce the chance of OoO, try to unclone the skbs before giving up. v1 -> v2: - use avoid skb_copy and fallback to netif_receive_skb - Eric | ||||
| CVE-2021-47092 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Always clear vmx->fail on emulation_required Revert a relatively recent change that set vmx->fail if the vCPU is in L2 and emulation_required is true, as that behavior is completely bogus. Setting vmx->fail and synthesizing a VM-Exit is contradictory and wrong: (a) it's impossible to have both a VM-Fail and VM-Exit (b) vmcs.EXIT_REASON is not modified on VM-Fail (c) emulation_required refers to guest state and guest state checks are always VM-Exits, not VM-Fails. For KVM specifically, emulation_required is handled before nested exits in __vmx_handle_exit(), thus setting vmx->fail has no immediate effect, i.e. KVM calls into handle_invalid_guest_state() and vmx->fail is ignored. Setting vmx->fail can ultimately result in a WARN in nested_vmx_vmexit() firing when tearing down the VM as KVM never expects vmx->fail to be set when L2 is active, KVM always reflects those errors into L1. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 21158 at arch/x86/kvm/vmx/nested.c:4548 nested_vmx_vmexit+0x16bd/0x17e0 arch/x86/kvm/vmx/nested.c:4547 Modules linked in: CPU: 0 PID: 21158 Comm: syz-executor.1 Not tainted 5.16.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:nested_vmx_vmexit+0x16bd/0x17e0 arch/x86/kvm/vmx/nested.c:4547 Code: <0f> 0b e9 2e f8 ff ff e8 57 b3 5d 00 0f 0b e9 00 f1 ff ff 89 e9 80 Call Trace: vmx_leave_nested arch/x86/kvm/vmx/nested.c:6220 [inline] nested_vmx_free_vcpu+0x83/0xc0 arch/x86/kvm/vmx/nested.c:330 vmx_free_vcpu+0x11f/0x2a0 arch/x86/kvm/vmx/vmx.c:6799 kvm_arch_vcpu_destroy+0x6b/0x240 arch/x86/kvm/x86.c:10989 kvm_vcpu_destroy+0x29/0x90 arch/x86/kvm/../../../virt/kvm/kvm_main.c:441 kvm_free_vcpus arch/x86/kvm/x86.c:11426 [inline] kvm_arch_destroy_vm+0x3ef/0x6b0 arch/x86/kvm/x86.c:11545 kvm_destroy_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:1189 [inline] kvm_put_kvm+0x751/0xe40 arch/x86/kvm/../../../virt/kvm/kvm_main.c:1220 kvm_vcpu_release+0x53/0x60 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3489 __fput+0x3fc/0x870 fs/file_table.c:280 task_work_run+0x146/0x1c0 kernel/task_work.c:164 exit_task_work include/linux/task_work.h:32 [inline] do_exit+0x705/0x24f0 kernel/exit.c:832 do_group_exit+0x168/0x2d0 kernel/exit.c:929 get_signal+0x1740/0x2120 kernel/signal.c:2852 arch_do_signal_or_restart+0x9c/0x730 arch/x86/kernel/signal.c:868 handle_signal_work kernel/entry/common.c:148 [inline] exit_to_user_mode_loop kernel/entry/common.c:172 [inline] exit_to_user_mode_prepare+0x191/0x220 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x2e/0x70 kernel/entry/common.c:300 do_syscall_64+0x53/0xd0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae | ||||
| CVE-2021-47090 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/hwpoison: clear MF_COUNT_INCREASED before retrying get_any_page() Hulk Robot reported a panic in put_page_testzero() when testing madvise() with MADV_SOFT_OFFLINE. The BUG() is triggered when retrying get_any_page(). This is because we keep MF_COUNT_INCREASED flag in second try but the refcnt is not increased. page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) ------------[ cut here ]------------ kernel BUG at include/linux/mm.h:737! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 5 PID: 2135 Comm: sshd Tainted: G B 5.16.0-rc6-dirty #373 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: release_pages+0x53f/0x840 Call Trace: free_pages_and_swap_cache+0x64/0x80 tlb_flush_mmu+0x6f/0x220 unmap_page_range+0xe6c/0x12c0 unmap_single_vma+0x90/0x170 unmap_vmas+0xc4/0x180 exit_mmap+0xde/0x3a0 mmput+0xa3/0x250 do_exit+0x564/0x1470 do_group_exit+0x3b/0x100 __do_sys_exit_group+0x13/0x20 __x64_sys_exit_group+0x16/0x20 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Modules linked in: ---[ end trace e99579b570fe0649 ]--- RIP: 0010:release_pages+0x53f/0x840 | ||||
| CVE-2021-47076 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Return CQE error if invalid lkey was supplied RXE is missing update of WQE status in LOCAL_WRITE failures. This caused the following kernel panic if someone sent an atomic operation with an explicitly wrong lkey. [leonro@vm ~]$ mkt test test_atomic_invalid_lkey (tests.test_atomic.AtomicTest) ... WARNING: CPU: 5 PID: 263 at drivers/infiniband/sw/rxe/rxe_comp.c:740 rxe_completer+0x1a6d/0x2e30 [rdma_rxe] Modules linked in: crc32_generic rdma_rxe ip6_udp_tunnel udp_tunnel rdma_ucm rdma_cm ib_umad ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5_core ptp pps_core CPU: 5 PID: 263 Comm: python3 Not tainted 5.13.0-rc1+ #2936 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:rxe_completer+0x1a6d/0x2e30 [rdma_rxe] Code: 03 0f 8e 65 0e 00 00 3b 93 10 06 00 00 0f 84 82 0a 00 00 4c 89 ff 4c 89 44 24 38 e8 2d 74 a9 e1 4c 8b 44 24 38 e9 1c f5 ff ff <0f> 0b e9 0c e8 ff ff b8 05 00 00 00 41 bf 05 00 00 00 e9 ab e7 ff RSP: 0018:ffff8880158af090 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888016a78000 RCX: ffffffffa0cf1652 RDX: 1ffff9200004b442 RSI: 0000000000000004 RDI: ffffc9000025a210 RBP: dffffc0000000000 R08: 00000000ffffffea R09: ffff88801617740b R10: ffffed1002c2ee81 R11: 0000000000000007 R12: ffff88800f3b63e8 R13: ffff888016a78008 R14: ffffc9000025a180 R15: 000000000000000c FS: 00007f88b622a740(0000) GS:ffff88806d540000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f88b5a1fa10 CR3: 000000000d848004 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rxe_do_task+0x130/0x230 [rdma_rxe] rxe_rcv+0xb11/0x1df0 [rdma_rxe] rxe_loopback+0x157/0x1e0 [rdma_rxe] rxe_responder+0x5532/0x7620 [rdma_rxe] rxe_do_task+0x130/0x230 [rdma_rxe] rxe_rcv+0x9c8/0x1df0 [rdma_rxe] rxe_loopback+0x157/0x1e0 [rdma_rxe] rxe_requester+0x1efd/0x58c0 [rdma_rxe] rxe_do_task+0x130/0x230 [rdma_rxe] rxe_post_send+0x998/0x1860 [rdma_rxe] ib_uverbs_post_send+0xd5f/0x1220 [ib_uverbs] ib_uverbs_write+0x847/0xc80 [ib_uverbs] vfs_write+0x1c5/0x840 ksys_write+0x176/0x1d0 do_syscall_64+0x3f/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae | ||||
| CVE-2021-47067 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc/tegra: regulators: Fix locking up when voltage-spread is out of range Fix voltage coupler lockup which happens when voltage-spread is out of range due to a bug in the code. The max-spread requirement shall be accounted when CPU regulator doesn't have consumers. This problem is observed on Tegra30 Ouya game console once system-wide DVFS is enabled in a device-tree. | ||||
| CVE-2021-47036 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: udp: skip L4 aggregation for UDP tunnel packets If NETIF_F_GRO_FRAGLIST or NETIF_F_GRO_UDP_FWD are enabled, and there are UDP tunnels available in the system, udp_gro_receive() could end-up doing L4 aggregation (either SKB_GSO_UDP_L4 or SKB_GSO_FRAGLIST) at the outer UDP tunnel level for packets effectively carrying and UDP tunnel header. That could cause inner protocol corruption. If e.g. the relevant packets carry a vxlan header, different vxlan ids will be ignored/ aggregated to the same GSO packet. Inner headers will be ignored, too, so that e.g. TCP over vxlan push packets will be held in the GRO engine till the next flush, etc. Just skip the SKB_GSO_UDP_L4 and SKB_GSO_FRAGLIST code path if the current packet could land in a UDP tunnel, and let udp_gro_receive() do GRO via udp_sk(sk)->gro_receive. The check implemented in this patch is broader than what is strictly needed, as the existing UDP tunnel could be e.g. configured on top of a different device: we could end-up skipping GRO at-all for some packets. Anyhow, that is a very thin corner case and covering it will add quite a bit of complexity. v1 -> v2: - hopefully clarify the commit message | ||||
| CVE-2021-47035 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Remove WO permissions on second-level paging entries When the first level page table is used for IOVA translation, it only supports Read-Only and Read-Write permissions. The Write-Only permission is not supported as the PRESENT bit (implying Read permission) should always set. When using second level, we still give separate permissions that allows WriteOnly which seems inconsistent and awkward. We want to have consistent behavior. After moving to 1st level, we don't want things to work sometimes, and break if we use 2nd level for the same mappings. Hence remove this configuration. | ||||
| CVE-2021-47029 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mt76: connac: fix kernel warning adding monitor interface Fix the following kernel warning adding a monitor interface in mt76_connac_mcu_uni_add_dev routine. [ 507.984882] ------------[ cut here ]------------ [ 507.989515] WARNING: CPU: 1 PID: 3017 at mt76_connac_mcu_uni_add_dev+0x178/0x190 [mt76_connac_lib] [ 508.059379] CPU: 1 PID: 3017 Comm: ifconfig Not tainted 5.4.98 #0 [ 508.065461] Hardware name: MT7622_MT7531 RFB (DT) [ 508.070156] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 508.074939] pc : mt76_connac_mcu_uni_add_dev+0x178/0x190 [mt76_connac_lib] [ 508.081806] lr : mt7921_eeprom_init+0x1288/0x1cb8 [mt7921e] [ 508.087367] sp : ffffffc013a33930 [ 508.090671] x29: ffffffc013a33930 x28: ffffff801e628ac0 [ 508.095973] x27: ffffff801c7f1200 x26: ffffff801c7eb008 [ 508.101275] x25: ffffff801c7eaef0 x24: ffffff801d025610 [ 508.106577] x23: ffffff801d022990 x22: ffffff801d024de8 [ 508.111879] x21: ffffff801d0226a0 x20: ffffff801c7eaee8 [ 508.117181] x19: ffffff801d0226a0 x18: 000000005d00b000 [ 508.122482] x17: 00000000ffffffff x16: 0000000000000000 [ 508.127785] x15: 0000000000000080 x14: ffffff801d704000 [ 508.133087] x13: 0000000000000040 x12: 0000000000000002 [ 508.138389] x11: 000000000000000c x10: 0000000000000000 [ 508.143691] x9 : 0000000000000020 x8 : 0000000000000001 [ 508.148992] x7 : 0000000000000000 x6 : 0000000000000000 [ 508.154294] x5 : ffffff801c7eaee8 x4 : 0000000000000006 [ 508.159596] x3 : 0000000000000001 x2 : 0000000000000000 [ 508.164898] x1 : ffffff801c7eac08 x0 : ffffff801d0226a0 [ 508.170200] Call trace: [ 508.172640] mt76_connac_mcu_uni_add_dev+0x178/0x190 [mt76_connac_lib] [ 508.179159] mt7921_eeprom_init+0x1288/0x1cb8 [mt7921e] [ 508.184394] drv_add_interface+0x34/0x88 [mac80211] [ 508.189271] ieee80211_add_virtual_monitor+0xe0/0xb48 [mac80211] [ 508.195277] ieee80211_do_open+0x86c/0x918 [mac80211] [ 508.200328] ieee80211_do_open+0x900/0x918 [mac80211] [ 508.205372] __dev_open+0xcc/0x150 [ 508.208763] __dev_change_flags+0x134/0x198 [ 508.212937] dev_change_flags+0x20/0x60 [ 508.216764] devinet_ioctl+0x3e8/0x748 [ 508.220503] inet_ioctl+0x1e4/0x350 [ 508.223983] sock_do_ioctl+0x48/0x2a0 [ 508.227635] sock_ioctl+0x310/0x4f8 [ 508.231116] do_vfs_ioctl+0xa4/0xac0 [ 508.234681] ksys_ioctl+0x44/0x90 [ 508.237985] __arm64_sys_ioctl+0x1c/0x48 [ 508.241901] el0_svc_common.constprop.1+0x7c/0x100 [ 508.246681] el0_svc_handler+0x18/0x20 [ 508.250421] el0_svc+0x8/0x1c8 [ 508.253465] ---[ end trace c7b90fee13d72c39 ]--- [ 508.261278] ------------[ cut here ]------------ | ||||
| CVE-2021-47028 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mt76: mt7915: fix txrate reporting Properly check rate_info to fix unexpected reporting. [ 1215.161863] Call trace: [ 1215.164307] cfg80211_calculate_bitrate+0x124/0x200 [cfg80211] [ 1215.170139] ieee80211s_update_metric+0x80/0xc0 [mac80211] [ 1215.175624] ieee80211_tx_status_ext+0x508/0x838 [mac80211] [ 1215.181190] mt7915_mcu_get_rx_rate+0x28c/0x8d0 [mt7915e] [ 1215.186580] mt7915_mac_tx_free+0x324/0x7c0 [mt7915e] [ 1215.191623] mt7915_queue_rx_skb+0xa8/0xd0 [mt7915e] [ 1215.196582] mt76_dma_cleanup+0x7b0/0x11d0 [mt76] [ 1215.201276] __napi_poll+0x38/0xf8 [ 1215.204668] napi_workfn+0x40/0x80 [ 1215.208062] process_one_work+0x1fc/0x390 [ 1215.212062] worker_thread+0x48/0x4d0 [ 1215.215715] kthread+0x120/0x128 [ 1215.218935] ret_from_fork+0x10/0x1c | ||||
| CVE-2021-47027 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921: fix kernel crash when the firmware fails to download Fix kernel crash when the firmware is missing or fails to download. [ 9.444758] kernel BUG at drivers/pci/msi.c:375! [ 9.449363] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 9.501033] pstate: a0400009 (NzCv daif +PAN -UAO) [ 9.505814] pc : free_msi_irqs+0x180/0x184 [ 9.509897] lr : free_msi_irqs+0x40/0x184 [ 9.513893] sp : ffffffc015193870 [ 9.517194] x29: ffffffc015193870 x28: 00000000f0e94fa2 [ 9.522492] x27: 0000000000000acd x26: 000000000000009a [ 9.527790] x25: ffffffc0152cee58 x24: ffffffdbb383e0d8 [ 9.533087] x23: ffffffdbb38628d0 x22: 0000000000040200 [ 9.538384] x21: ffffff8cf7de7318 x20: ffffff8cd65a2480 [ 9.543681] x19: ffffff8cf7de7000 x18: 0000000000000000 [ 9.548979] x17: ffffff8cf9ca03b4 x16: ffffffdc13ad9a34 [ 9.554277] x15: 0000000000000000 x14: 0000000000080800 [ 9.559575] x13: ffffff8cd65a2980 x12: 0000000000000000 [ 9.564873] x11: ffffff8cfa45d820 x10: ffffff8cfa45d6d0 [ 9.570171] x9 : 0000000000000040 x8 : ffffff8ccef1b780 [ 9.575469] x7 : aaaaaaaaaaaaaaaa x6 : 0000000000000000 [ 9.580766] x5 : ffffffdc13824900 x4 : ffffff8ccefe0000 [ 9.586063] x3 : 0000000000000000 x2 : 0000000000000000 [ 9.591362] x1 : 0000000000000125 x0 : ffffff8ccefe0000 [ 9.596660] Call trace: [ 9.599095] free_msi_irqs+0x180/0x184 [ 9.602831] pci_disable_msi+0x100/0x130 [ 9.606740] pci_free_irq_vectors+0x24/0x30 [ 9.610915] mt7921_pci_probe+0xbc/0x250 [mt7921e] [ 9.615693] pci_device_probe+0xd4/0x14c [ 9.619604] really_probe+0x134/0x2ec [ 9.623252] driver_probe_device+0x64/0xfc [ 9.627335] device_driver_attach+0x4c/0x6c [ 9.631506] __driver_attach+0xac/0xc0 [ 9.635243] bus_for_each_dev+0x8c/0xd4 [ 9.639066] driver_attach+0x2c/0x38 [ 9.642628] bus_add_driver+0xfc/0x1d0 [ 9.646365] driver_register+0x64/0xf8 [ 9.650101] __pci_register_driver+0x6c/0x7c [ 9.654360] init_module+0x28/0xfdc [mt7921e] [ 9.658704] do_one_initcall+0x13c/0x2d0 [ 9.662615] do_init_module+0x58/0x1e8 [ 9.666351] load_module+0xd80/0xeb4 [ 9.669912] __arm64_sys_finit_module+0xa8/0xe0 [ 9.674430] el0_svc_common+0xa4/0x16c [ 9.678168] el0_svc_compat_handler+0x2c/0x40 [ 9.682511] el0_svc_compat+0x8/0x10 [ 9.686076] Code: a94257f6 f9400bf7 a8c47bfd d65f03c0 (d4210000) [ 9.692155] ---[ end trace 7621f966afbf0a29 ]--- [ 9.697385] Kernel panic - not syncing: Fatal exception [ 9.702599] SMP: stopping secondary CPUs [ 9.706549] Kernel Offset: 0x1c03600000 from 0xffffffc010000000 [ 9.712456] PHYS_OFFSET: 0xfffffff440000000 [ 9.716625] CPU features: 0x080026,2a80aa18 [ 9.720795] Memory Limit: none | ||||