Total
2068 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-46692 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: Mark get_wq_ctx() as atomic call Currently get_wq_ctx() is wrongly configured as a standard call. When two SMC calls are in sleep and one SMC wakes up, it calls get_wq_ctx() to resume the corresponding sleeping thread. But if get_wq_ctx() is interrupted, goes to sleep and another SMC call is waiting to be allocated a waitq context, it leads to a deadlock. To avoid this get_wq_ctx() must be an atomic call and can't be a standard SMC call. Hence mark get_wq_ctx() as a fast call. | ||||
| CVE-2024-46680 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Fix random crash seen while removing driver This fixes the random kernel crash seen while removing the driver, when running the load/unload test over multiple iterations. 1) modprobe btnxpuart 2) hciconfig hci0 reset 3) hciconfig (check hci0 interface up with valid BD address) 4) modprobe -r btnxpuart Repeat steps 1 to 4 The ps_wakeup() call in btnxpuart_close() schedules the psdata->work(), which gets scheduled after module is removed, causing a kernel crash. This hidden issue got highlighted after enabling Power Save by default in 4183a7be7700 (Bluetooth: btnxpuart: Enable Power Save feature on startup) The new ps_cleanup() deasserts UART break immediately while closing serdev device, cancels any scheduled ps_work and destroys the ps_lock mutex. [ 85.884604] Unable to handle kernel paging request at virtual address ffffd4a61638f258 [ 85.884624] Mem abort info: [ 85.884625] ESR = 0x0000000086000007 [ 85.884628] EC = 0x21: IABT (current EL), IL = 32 bits [ 85.884633] SET = 0, FnV = 0 [ 85.884636] EA = 0, S1PTW = 0 [ 85.884638] FSC = 0x07: level 3 translation fault [ 85.884642] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041dd0000 [ 85.884646] [ffffd4a61638f258] pgd=1000000095fff003, p4d=1000000095fff003, pud=100000004823d003, pmd=100000004823e003, pte=0000000000000000 [ 85.884662] Internal error: Oops: 0000000086000007 [#1] PREEMPT SMP [ 85.890932] Modules linked in: algif_hash algif_skcipher af_alg overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce polyval_generic snd_soc_imx_spdif snd_soc_imx_card snd_soc_ak5558 snd_soc_ak4458 caam secvio error snd_soc_fsl_spdif snd_soc_fsl_micfil snd_soc_fsl_sai snd_soc_fsl_utils gpio_ir_recv rc_core fuse [last unloaded: btnxpuart(O)] [ 85.927297] CPU: 1 PID: 67 Comm: kworker/1:3 Tainted: G O 6.1.36+g937b1be4345a #1 [ 85.936176] Hardware name: FSL i.MX8MM EVK board (DT) [ 85.936182] Workqueue: events 0xffffd4a61638f380 [ 85.936198] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 85.952817] pc : 0xffffd4a61638f258 [ 85.952823] lr : 0xffffd4a61638f258 [ 85.952827] sp : ffff8000084fbd70 [ 85.952829] x29: ffff8000084fbd70 x28: 0000000000000000 x27: 0000000000000000 [ 85.963112] x26: ffffd4a69133f000 x25: ffff4bf1c8540990 x24: ffff4bf215b87305 [ 85.963119] x23: ffff4bf215b87300 x22: ffff4bf1c85409d0 x21: ffff4bf1c8540970 [ 85.977382] x20: 0000000000000000 x19: ffff4bf1c8540880 x18: 0000000000000000 [ 85.977391] x17: 0000000000000000 x16: 0000000000000133 x15: 0000ffffe2217090 [ 85.977399] x14: 0000000000000001 x13: 0000000000000133 x12: 0000000000000139 [ 85.977407] x11: 0000000000000001 x10: 0000000000000a60 x9 : ffff8000084fbc50 [ 85.977417] x8 : ffff4bf215b7d000 x7 : ffff4bf215b83b40 x6 : 00000000000003e8 [ 85.977424] x5 : 00000000410fd030 x4 : 0000000000000000 x3 : 0000000000000000 [ 85.977432] x2 : 0000000000000000 x1 : ffff4bf1c4265880 x0 : 0000000000000000 [ 85.977443] Call trace: [ 85.977446] 0xffffd4a61638f258 [ 85.977451] 0xffffd4a61638f3e8 [ 85.977455] process_one_work+0x1d4/0x330 [ 85.977464] worker_thread+0x6c/0x430 [ 85.977471] kthread+0x108/0x10c [ 85.977476] ret_from_fork+0x10/0x20 [ 85.977488] Code: bad PC value [ 85.977491] ---[ end trace 0000000000000000 ]--- Preset since v6.9.11 | ||||
| CVE-2024-44991 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tcp: prevent concurrent execution of tcp_sk_exit_batch Its possible that two threads call tcp_sk_exit_batch() concurrently, once from the cleanup_net workqueue, once from a task that failed to clone a new netns. In the latter case, error unwinding calls the exit handlers in reverse order for the 'failed' netns. tcp_sk_exit_batch() calls tcp_twsk_purge(). Problem is that since commit b099ce2602d8 ("net: Batch inet_twsk_purge"), this function picks up twsk in any dying netns, not just the one passed in via exit_batch list. This means that the error unwind of setup_net() can "steal" and destroy timewait sockets belonging to the exiting netns. This allows the netns exit worker to proceed to call WARN_ON_ONCE(!refcount_dec_and_test(&net->ipv4.tcp_death_row.tw_refcount)); without the expected 1 -> 0 transition, which then splats. At same time, error unwind path that is also running inet_twsk_purge() will splat as well: WARNING: .. at lib/refcount.c:31 refcount_warn_saturate+0x1ed/0x210 ... refcount_dec include/linux/refcount.h:351 [inline] inet_twsk_kill+0x758/0x9c0 net/ipv4/inet_timewait_sock.c:70 inet_twsk_deschedule_put net/ipv4/inet_timewait_sock.c:221 inet_twsk_purge+0x725/0x890 net/ipv4/inet_timewait_sock.c:304 tcp_sk_exit_batch+0x1c/0x170 net/ipv4/tcp_ipv4.c:3522 ops_exit_list+0x128/0x180 net/core/net_namespace.c:178 setup_net+0x714/0xb40 net/core/net_namespace.c:375 copy_net_ns+0x2f0/0x670 net/core/net_namespace.c:508 create_new_namespaces+0x3ea/0xb10 kernel/nsproxy.c:110 ... because refcount_dec() of tw_refcount unexpectedly dropped to 0. This doesn't seem like an actual bug (no tw sockets got lost and I don't see a use-after-free) but as erroneous trigger of debug check. Add a mutex to force strict ordering: the task that calls tcp_twsk_purge() blocks other task from doing final _dec_and_test before mutex-owner has removed all tw sockets of dying netns. | ||||
| CVE-2024-44954 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: line6: Fix racy access to midibuf There can be concurrent accesses to line6 midibuf from both the URB completion callback and the rawmidi API access. This could be a cause of KMSAN warning triggered by syzkaller below (so put as reported-by here). This patch protects the midibuf call of the former code path with a spinlock for avoiding the possible races. | ||||
| CVE-2024-44937 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: intel-vbtn: Protect ACPI notify handler against recursion Since commit e2ffcda16290 ("ACPI: OSL: Allow Notify () handlers to run on all CPUs") ACPI notify handlers like the intel-vbtn notify_handler() may run on multiple CPU cores racing with themselves. This race gets hit on Dell Venue 7140 tablets when undocking from the keyboard, causing the handler to try and register priv->switches_dev twice, as can be seen from the dev_info() message getting logged twice: [ 83.861800] intel-vbtn INT33D6:00: Registering Intel Virtual Switches input-dev after receiving a switch event [ 83.861858] input: Intel Virtual Switches as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input17 [ 83.861865] intel-vbtn INT33D6:00: Registering Intel Virtual Switches input-dev after receiving a switch event After which things go seriously wrong: [ 83.861872] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input17' ... [ 83.861967] kobject: kobject_add_internal failed for input17 with -EEXIST, don't try to register things with the same name in the same directory. [ 83.877338] BUG: kernel NULL pointer dereference, address: 0000000000000018 ... Protect intel-vbtn notify_handler() from racing with itself with a mutex to fix this. | ||||
| CVE-2024-43887 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/tcp: Disable TCP-AO static key after RCU grace period The lifetime of TCP-AO static_key is the same as the last tcp_ao_info. On the socket destruction tcp_ao_info ceases to be with RCU grace period, while tcp-ao static branch is currently deferred destructed. The static key definition is : DEFINE_STATIC_KEY_DEFERRED_FALSE(tcp_ao_needed, HZ); which means that if RCU grace period is delayed by more than a second and tcp_ao_needed is in the process of disablement, other CPUs may yet see tcp_ao_info which atent dead, but soon-to-be. And that breaks the assumption of static_key_fast_inc_not_disabled(). See the comment near the definition: > * The caller must make sure that the static key can't get disabled while > * in this function. It doesn't patch jump labels, only adds a user to > * an already enabled static key. Originally it was introduced in commit eb8c507296f6 ("jump_label: Prevent key->enabled int overflow"), which is needed for the atomic contexts, one of which would be the creation of a full socket from a request socket. In that atomic context, it's known by the presence of the key (md5/ao) that the static branch is already enabled. So, the ref counter for that static branch is just incremented instead of holding the proper mutex. static_key_fast_inc_not_disabled() is just a helper for such usage case. But it must not be used if the static branch could get disabled in parallel as it's not protected by jump_label_mutex and as a result, races with jump_label_update() implementation details. Happened on netdev test-bot[1], so not a theoretical issue: [] jump_label: Fatal kernel bug, unexpected op at tcp_inbound_hash+0x1a7/0x870 [ffffffffa8c4e9b7] (eb 50 0f 1f 44 != 66 90 0f 1f 00)) size:2 type:1 [] ------------[ cut here ]------------ [] kernel BUG at arch/x86/kernel/jump_label.c:73! [] Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI [] CPU: 3 PID: 243 Comm: kworker/3:3 Not tainted 6.10.0-virtme #1 [] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [] Workqueue: events jump_label_update_timeout [] RIP: 0010:__jump_label_patch+0x2f6/0x350 ... [] Call Trace: [] <TASK> [] arch_jump_label_transform_queue+0x6c/0x110 [] __jump_label_update+0xef/0x350 [] __static_key_slow_dec_cpuslocked.part.0+0x3c/0x60 [] jump_label_update_timeout+0x2c/0x40 [] process_one_work+0xe3b/0x1670 [] worker_thread+0x587/0xce0 [] kthread+0x28a/0x350 [] ret_from_fork+0x31/0x70 [] ret_from_fork_asm+0x1a/0x30 [] </TASK> [] Modules linked in: veth [] ---[ end trace 0000000000000000 ]--- [] RIP: 0010:__jump_label_patch+0x2f6/0x350 [1]: https://netdev-3.bots.linux.dev/vmksft-tcp-ao-dbg/results/696681/5-connect-deny-ipv6/stderr | ||||
| CVE-2024-43856 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dma: fix call order in dmam_free_coherent dmam_free_coherent() frees a DMA allocation, which makes the freed vaddr available for reuse, then calls devres_destroy() to remove and free the data structure used to track the DMA allocation. Between the two calls, it is possible for a concurrent task to make an allocation with the same vaddr and add it to the devres list. If this happens, there will be two entries in the devres list with the same vaddr and devres_destroy() can free the wrong entry, triggering the WARN_ON() in dmam_match. Fix by destroying the devres entry before freeing the DMA allocation. kokonut //net/encryption http://sponge2/b9145fe6-0f72-4325-ac2f-a84d81075b03 | ||||
| CVE-2024-42232 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: libceph: fix race between delayed_work() and ceph_monc_stop() The way the delayed work is handled in ceph_monc_stop() is prone to races with mon_fault() and possibly also finish_hunting(). Both of these can requeue the delayed work which wouldn't be canceled by any of the following code in case that happens after cancel_delayed_work_sync() runs -- __close_session() doesn't mess with the delayed work in order to avoid interfering with the hunting interval logic. This part was missed in commit b5d91704f53e ("libceph: behave in mon_fault() if cur_mon < 0") and use-after-free can still ensue on monc and objects that hang off of it, with monc->auth and monc->monmap being particularly susceptible to quickly being reused. To fix this: - clear monc->cur_mon and monc->hunting as part of closing the session in ceph_monc_stop() - bail from delayed_work() if monc->cur_mon is cleared, similar to how it's done in mon_fault() and finish_hunting() (based on monc->hunting) - call cancel_delayed_work_sync() after the session is closed | ||||
| CVE-2024-41054 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix ufshcd_clear_cmd racing issue When ufshcd_clear_cmd is racing with the completion ISR, the completed tag of the request's mq_hctx pointer will be set to NULL by the ISR. And ufshcd_clear_cmd's call to ufshcd_mcq_req_to_hwq will get NULL pointer KE. Return success when the request is completed by ISR because sq does not need cleanup. The racing flow is: Thread A ufshcd_err_handler step 1 ufshcd_try_to_abort_task ufshcd_cmd_inflight(true) step 3 ufshcd_clear_cmd ... ufshcd_mcq_req_to_hwq blk_mq_unique_tag rq->mq_hctx->queue_num step 5 Thread B ufs_mtk_mcq_intr(cq complete ISR) step 2 scsi_done ... __blk_mq_free_request rq->mq_hctx = NULL; step 4 Below is KE back trace: ufshcd_try_to_abort_task: cmd pending in the device. tag = 6 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000194 pc : [0xffffffd589679bf8] blk_mq_unique_tag+0x8/0x14 lr : [0xffffffd5862f95b4] ufshcd_mcq_sq_cleanup+0x6c/0x1cc [ufs_mediatek_mod_ise] Workqueue: ufs_eh_wq_0 ufshcd_err_handler [ufs_mediatek_mod_ise] Call trace: dump_backtrace+0xf8/0x148 show_stack+0x18/0x24 dump_stack_lvl+0x60/0x7c dump_stack+0x18/0x3c mrdump_common_die+0x24c/0x398 [mrdump] ipanic_die+0x20/0x34 [mrdump] notify_die+0x80/0xd8 die+0x94/0x2b8 __do_kernel_fault+0x264/0x298 do_page_fault+0xa4/0x4b8 do_translation_fault+0x38/0x54 do_mem_abort+0x58/0x118 el1_abort+0x3c/0x5c el1h_64_sync_handler+0x54/0x90 el1h_64_sync+0x68/0x6c blk_mq_unique_tag+0x8/0x14 ufshcd_clear_cmd+0x34/0x118 [ufs_mediatek_mod_ise] ufshcd_try_to_abort_task+0x2c8/0x5b4 [ufs_mediatek_mod_ise] ufshcd_err_handler+0xa7c/0xfa8 [ufs_mediatek_mod_ise] process_one_work+0x208/0x4fc worker_thread+0x228/0x438 kthread+0x104/0x1d4 ret_from_fork+0x10/0x20 | ||||
| CVE-2024-41053 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix ufshcd_abort_one racing issue When ufshcd_abort_one is racing with the completion ISR, the completed tag of the request's mq_hctx pointer will be set to NULL by ISR. Return success when request is completed by ISR because ufshcd_abort_one does not need to do anything. The racing flow is: Thread A ufshcd_err_handler step 1 ... ufshcd_abort_one ufshcd_try_to_abort_task ufshcd_cmd_inflight(true) step 3 ufshcd_mcq_req_to_hwq blk_mq_unique_tag rq->mq_hctx->queue_num step 5 Thread B ufs_mtk_mcq_intr(cq complete ISR) step 2 scsi_done ... __blk_mq_free_request rq->mq_hctx = NULL; step 4 Below is KE back trace. ufshcd_try_to_abort_task: cmd at tag 41 not pending in the device. ufshcd_try_to_abort_task: cmd at tag=41 is cleared. Aborting tag 41 / CDB 0x28 succeeded Unable to handle kernel NULL pointer dereference at virtual address 0000000000000194 pc : [0xffffffddd7a79bf8] blk_mq_unique_tag+0x8/0x14 lr : [0xffffffddd6155b84] ufshcd_mcq_req_to_hwq+0x1c/0x40 [ufs_mediatek_mod_ise] do_mem_abort+0x58/0x118 el1_abort+0x3c/0x5c el1h_64_sync_handler+0x54/0x90 el1h_64_sync+0x68/0x6c blk_mq_unique_tag+0x8/0x14 ufshcd_err_handler+0xae4/0xfa8 [ufs_mediatek_mod_ise] process_one_work+0x208/0x4fc worker_thread+0x228/0x438 kthread+0x104/0x1d4 ret_from_fork+0x10/0x20 | ||||
| CVE-2024-39486 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/drm_file: Fix pid refcounting race <maarten.lankhorst@linux.intel.com>, Maxime Ripard <mripard@kernel.org>, Thomas Zimmermann <tzimmermann@suse.de> filp->pid is supposed to be a refcounted pointer; however, before this patch, drm_file_update_pid() only increments the refcount of a struct pid after storing a pointer to it in filp->pid and dropping the dev->filelist_mutex, making the following race possible: process A process B ========= ========= begin drm_file_update_pid mutex_lock(&dev->filelist_mutex) rcu_replace_pointer(filp->pid, <pid B>, 1) mutex_unlock(&dev->filelist_mutex) begin drm_file_update_pid mutex_lock(&dev->filelist_mutex) rcu_replace_pointer(filp->pid, <pid A>, 1) mutex_unlock(&dev->filelist_mutex) get_pid(<pid A>) synchronize_rcu() put_pid(<pid B>) *** pid B reaches refcount 0 and is freed here *** get_pid(<pid B>) *** UAF *** synchronize_rcu() put_pid(<pid A>) As far as I know, this race can only occur with CONFIG_PREEMPT_RCU=y because it requires RCU to detect a quiescent state in code that is not explicitly calling into the scheduler. This race leads to use-after-free of a "struct pid". It is probably somewhat hard to hit because process A has to pass through a synchronize_rcu() operation while process B is between mutex_unlock() and get_pid(). Fix it by ensuring that by the time a pointer to the current task's pid is stored in the file, an extra reference to the pid has been taken. This fix also removes the condition for synchronize_rcu(); I think that optimization is unnecessary complexity, since in that case we would usually have bailed out on the lockless check above. | ||||
| CVE-2024-38628 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_audio: Fix race condition use of controls after free during gadget unbind. Hang on to the control IDs instead of pointers since those are correctly handled with locks. | ||||
| CVE-2024-36899 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: gpiolib: cdev: Fix use after free in lineinfo_changed_notify The use-after-free issue occurs as follows: when the GPIO chip device file is being closed by invoking gpio_chrdev_release(), watched_lines is freed by bitmap_free(), but the unregistration of lineinfo_changed_nb notifier chain failed due to waiting write rwsem. Additionally, one of the GPIO chip's lines is also in the release process and holds the notifier chain's read rwsem. Consequently, a race condition leads to the use-after-free of watched_lines. Here is the typical stack when issue happened: [free] gpio_chrdev_release() --> bitmap_free(cdev->watched_lines) <-- freed --> blocking_notifier_chain_unregister() --> down_write(&nh->rwsem) <-- waiting rwsem --> __down_write_common() --> rwsem_down_write_slowpath() --> schedule_preempt_disabled() --> schedule() [use] st54spi_gpio_dev_release() --> gpio_free() --> gpiod_free() --> gpiod_free_commit() --> gpiod_line_state_notify() --> blocking_notifier_call_chain() --> down_read(&nh->rwsem); <-- held rwsem --> notifier_call_chain() --> lineinfo_changed_notify() --> test_bit(xxxx, cdev->watched_lines) <-- use after free The side effect of the use-after-free issue is that a GPIO line event is being generated for userspace where it shouldn't. However, since the chrdev is being closed, userspace won't have the chance to read that event anyway. To fix the issue, call the bitmap_free() function after the unregistration of lineinfo_changed_nb notifier chain. | ||||
| CVE-2024-36894 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix race between aio_cancel() and AIO request complete FFS based applications can utilize the aio_cancel() callback to dequeue pending USB requests submitted to the UDC. There is a scenario where the FFS application issues an AIO cancel call, while the UDC is handling a soft disconnect. For a DWC3 based implementation, the callstack looks like the following: DWC3 Gadget FFS Application dwc3_gadget_soft_disconnect() ... --> dwc3_stop_active_transfers() --> dwc3_gadget_giveback(-ESHUTDOWN) --> ffs_epfile_async_io_complete() ffs_aio_cancel() --> usb_ep_free_request() --> usb_ep_dequeue() There is currently no locking implemented between the AIO completion handler and AIO cancel, so the issue occurs if the completion routine is running in parallel to an AIO cancel call coming from the FFS application. As the completion call frees the USB request (io_data->req) the FFS application is also referencing it for the usb_ep_dequeue() call. This can lead to accessing a stale/hanging pointer. commit b566d38857fc ("usb: gadget: f_fs: use io_data->status consistently") relocated the usb_ep_free_request() into ffs_epfile_async_io_complete(). However, in order to properly implement locking to mitigate this issue, the spinlock can't be added to ffs_epfile_async_io_complete(), as usb_ep_dequeue() (if successfully dequeuing a USB request) will call the function driver's completion handler in the same context. Hence, leading into a deadlock. Fix this issue by moving the usb_ep_free_request() back to ffs_user_copy_worker(), and ensuring that it explicitly sets io_data->req to NULL after freeing it within the ffs->eps_lock. This resolves the race condition above, as the ffs_aio_cancel() routine will not continue attempting to dequeue a request that has already been freed, or the ffs_user_copy_work() not freeing the USB request until the AIO cancel is done referencing it. This fix depends on commit b566d38857fc ("usb: gadget: f_fs: use io_data->status consistently") | ||||
| CVE-2024-35977 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/chrome: cros_ec_uart: properly fix race condition The cros_ec_uart_probe() function calls devm_serdev_device_open() before it calls serdev_device_set_client_ops(). This can trigger a NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... Call Trace: <TASK> ... ? ttyport_receive_buf A simplified version of crashing code is as follows: static inline size_t serdev_controller_receive_buf(struct serdev_controller *ctrl, const u8 *data, size_t count) { struct serdev_device *serdev = ctrl->serdev; if (!serdev || !serdev->ops->receive_buf) // CRASH! return 0; return serdev->ops->receive_buf(serdev, data, count); } It assumes that if SERPORT_ACTIVE is set and serdev exists, serdev->ops will also exist. This conflicts with the existing cros_ec_uart_probe() logic, as it first calls devm_serdev_device_open() (which sets SERPORT_ACTIVE), and only later sets serdev->ops via serdev_device_set_client_ops(). Commit 01f95d42b8f4 ("platform/chrome: cros_ec_uart: fix race condition") attempted to fix a similar race condition, but while doing so, made the window of error for this race condition to happen much wider. Attempt to fix the race condition again, making sure we fully setup before calling devm_serdev_device_open(). | ||||
| CVE-2024-35899 | 3 Debian, Linux, Redhat | 4 Debian Linux, Linux Kernel, Enterprise Linux and 1 more | 2025-05-04 | 6.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: flush pending destroy work before exit_net release Similar to 2c9f0293280e ("netfilter: nf_tables: flush pending destroy work before netlink notifier") to address a race between exit_net and the destroy workqueue. The trace below shows an element to be released via destroy workqueue while exit_net path (triggered via module removal) has already released the set that is used in such transaction. [ 1360.547789] BUG: KASAN: slab-use-after-free in nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.547861] Read of size 8 at addr ffff888140500cc0 by task kworker/4:1/152465 [ 1360.547870] CPU: 4 PID: 152465 Comm: kworker/4:1 Not tainted 6.8.0+ #359 [ 1360.547882] Workqueue: events nf_tables_trans_destroy_work [nf_tables] [ 1360.547984] Call Trace: [ 1360.547991] <TASK> [ 1360.547998] dump_stack_lvl+0x53/0x70 [ 1360.548014] print_report+0xc4/0x610 [ 1360.548026] ? __virt_addr_valid+0xba/0x160 [ 1360.548040] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 1360.548054] ? nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.548176] kasan_report+0xae/0xe0 [ 1360.548189] ? nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.548312] nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.548447] ? __pfx_nf_tables_trans_destroy_work+0x10/0x10 [nf_tables] [ 1360.548577] ? _raw_spin_unlock_irq+0x18/0x30 [ 1360.548591] process_one_work+0x2f1/0x670 [ 1360.548610] worker_thread+0x4d3/0x760 [ 1360.548627] ? __pfx_worker_thread+0x10/0x10 [ 1360.548640] kthread+0x16b/0x1b0 [ 1360.548653] ? __pfx_kthread+0x10/0x10 [ 1360.548665] ret_from_fork+0x2f/0x50 [ 1360.548679] ? __pfx_kthread+0x10/0x10 [ 1360.548690] ret_from_fork_asm+0x1a/0x30 [ 1360.548707] </TASK> [ 1360.548719] Allocated by task 192061: [ 1360.548726] kasan_save_stack+0x20/0x40 [ 1360.548739] kasan_save_track+0x14/0x30 [ 1360.548750] __kasan_kmalloc+0x8f/0xa0 [ 1360.548760] __kmalloc_node+0x1f1/0x450 [ 1360.548771] nf_tables_newset+0x10c7/0x1b50 [nf_tables] [ 1360.548883] nfnetlink_rcv_batch+0xbc4/0xdc0 [nfnetlink] [ 1360.548909] nfnetlink_rcv+0x1a8/0x1e0 [nfnetlink] [ 1360.548927] netlink_unicast+0x367/0x4f0 [ 1360.548935] netlink_sendmsg+0x34b/0x610 [ 1360.548944] ____sys_sendmsg+0x4d4/0x510 [ 1360.548953] ___sys_sendmsg+0xc9/0x120 [ 1360.548961] __sys_sendmsg+0xbe/0x140 [ 1360.548971] do_syscall_64+0x55/0x120 [ 1360.548982] entry_SYSCALL_64_after_hwframe+0x55/0x5d [ 1360.548994] Freed by task 192222: [ 1360.548999] kasan_save_stack+0x20/0x40 [ 1360.549009] kasan_save_track+0x14/0x30 [ 1360.549019] kasan_save_free_info+0x3b/0x60 [ 1360.549028] poison_slab_object+0x100/0x180 [ 1360.549036] __kasan_slab_free+0x14/0x30 [ 1360.549042] kfree+0xb6/0x260 [ 1360.549049] __nft_release_table+0x473/0x6a0 [nf_tables] [ 1360.549131] nf_tables_exit_net+0x170/0x240 [nf_tables] [ 1360.549221] ops_exit_list+0x50/0xa0 [ 1360.549229] free_exit_list+0x101/0x140 [ 1360.549236] unregister_pernet_operations+0x107/0x160 [ 1360.549245] unregister_pernet_subsys+0x1c/0x30 [ 1360.549254] nf_tables_module_exit+0x43/0x80 [nf_tables] [ 1360.549345] __do_sys_delete_module+0x253/0x370 [ 1360.549352] do_syscall_64+0x55/0x120 [ 1360.549360] entry_SYSCALL_64_after_hwframe+0x55/0x5d (gdb) list *__nft_release_table+0x473 0x1e033 is in __nft_release_table (net/netfilter/nf_tables_api.c:11354). 11349 list_for_each_entry_safe(flowtable, nf, &table->flowtables, list) { 11350 list_del(&flowtable->list); 11351 nft_use_dec(&table->use); 11352 nf_tables_flowtable_destroy(flowtable); 11353 } 11354 list_for_each_entry_safe(set, ns, &table->sets, list) { 11355 list_del(&set->list); 11356 nft_use_dec(&table->use); 11357 if (set->flags & (NFT_SET_MAP | NFT_SET_OBJECT)) 11358 nft_map_deactivat ---truncated--- | ||||
| CVE-2024-35898 | 3 Debian, Linux, Redhat | 7 Debian Linux, Linux Kernel, Enterprise Linux and 4 more | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get() nft_unregister_flowtable_type() within nf_flow_inet_module_exit() can concurrent with __nft_flowtable_type_get() within nf_tables_newflowtable(). And thhere is not any protection when iterate over nf_tables_flowtables list in __nft_flowtable_type_get(). Therefore, there is pertential data-race of nf_tables_flowtables list entry. Use list_for_each_entry_rcu() to iterate over nf_tables_flowtables list in __nft_flowtable_type_get(), and use rcu_read_lock() in the caller nft_flowtable_type_get() to protect the entire type query process. | ||||
| CVE-2024-34027 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: fix to cover {reserve,release}_compress_blocks() w/ cp_rwsem lock It needs to cover {reserve,release}_compress_blocks() w/ cp_rwsem lock to avoid racing with checkpoint, otherwise, filesystem metadata including blkaddr in dnode, inode fields and .total_valid_block_count may be corrupted after SPO case. | ||||
| CVE-2024-27062 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nouveau: lock the client object tree. It appears the client object tree has no locking unless I've missed something else. Fix races around adding/removing client objects, mostly vram bar mappings. 4562.099306] general protection fault, probably for non-canonical address 0x6677ed422bceb80c: 0000 [#1] PREEMPT SMP PTI [ 4562.099314] CPU: 2 PID: 23171 Comm: deqp-vk Not tainted 6.8.0-rc6+ #27 [ 4562.099324] Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021 [ 4562.099330] RIP: 0010:nvkm_object_search+0x1d/0x70 [nouveau] [ 4562.099503] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 48 89 f8 48 85 f6 74 39 48 8b 87 a0 00 00 00 48 85 c0 74 12 <48> 8b 48 f8 48 39 ce 73 15 48 8b 40 10 48 85 c0 75 ee 48 c7 c0 fe [ 4562.099506] RSP: 0000:ffffa94cc420bbf8 EFLAGS: 00010206 [ 4562.099512] RAX: 6677ed422bceb814 RBX: ffff98108791f400 RCX: ffff9810f26b8f58 [ 4562.099517] RDX: 0000000000000000 RSI: ffff9810f26b9158 RDI: ffff98108791f400 [ 4562.099519] RBP: ffff9810f26b9158 R08: 0000000000000000 R09: 0000000000000000 [ 4562.099521] R10: ffffa94cc420bc48 R11: 0000000000000001 R12: ffff9810f02a7cc0 [ 4562.099526] R13: 0000000000000000 R14: 00000000000000ff R15: 0000000000000007 [ 4562.099528] FS: 00007f629c5017c0(0000) GS:ffff98142c700000(0000) knlGS:0000000000000000 [ 4562.099534] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4562.099536] CR2: 00007f629a882000 CR3: 000000017019e004 CR4: 00000000003706f0 [ 4562.099541] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4562.099542] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 4562.099544] Call Trace: [ 4562.099555] <TASK> [ 4562.099573] ? die_addr+0x36/0x90 [ 4562.099583] ? exc_general_protection+0x246/0x4a0 [ 4562.099593] ? asm_exc_general_protection+0x26/0x30 [ 4562.099600] ? nvkm_object_search+0x1d/0x70 [nouveau] [ 4562.099730] nvkm_ioctl+0xa1/0x250 [nouveau] [ 4562.099861] nvif_object_map_handle+0xc8/0x180 [nouveau] [ 4562.099986] nouveau_ttm_io_mem_reserve+0x122/0x270 [nouveau] [ 4562.100156] ? dma_resv_test_signaled+0x26/0xb0 [ 4562.100163] ttm_bo_vm_fault_reserved+0x97/0x3c0 [ttm] [ 4562.100182] ? __mutex_unlock_slowpath+0x2a/0x270 [ 4562.100189] nouveau_ttm_fault+0x69/0xb0 [nouveau] [ 4562.100356] __do_fault+0x32/0x150 [ 4562.100362] do_fault+0x7c/0x560 [ 4562.100369] __handle_mm_fault+0x800/0xc10 [ 4562.100382] handle_mm_fault+0x17c/0x3e0 [ 4562.100388] do_user_addr_fault+0x208/0x860 [ 4562.100395] exc_page_fault+0x7f/0x200 [ 4562.100402] asm_exc_page_fault+0x26/0x30 [ 4562.100412] RIP: 0033:0x9b9870 [ 4562.100419] Code: 85 a8 f7 ff ff 8b 8d 80 f7 ff ff 89 08 e9 18 f2 ff ff 0f 1f 84 00 00 00 00 00 44 89 32 e9 90 fa ff ff 0f 1f 84 00 00 00 00 00 <44> 89 32 e9 f8 f1 ff ff 0f 1f 84 00 00 00 00 00 66 44 89 32 e9 e7 [ 4562.100422] RSP: 002b:00007fff9ba2dc70 EFLAGS: 00010246 [ 4562.100426] RAX: 0000000000000004 RBX: 000000000dd65e10 RCX: 000000fff0000000 [ 4562.100428] RDX: 00007f629a882000 RSI: 00007f629a882000 RDI: 0000000000000066 [ 4562.100432] RBP: 00007fff9ba2e570 R08: 0000000000000000 R09: 0000000123ddf000 [ 4562.100434] R10: 0000000000000001 R11: 0000000000000246 R12: 000000007fffffff [ 4562.100436] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 4562.100446] </TASK> [ 4562.100448] Modules linked in: nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink cmac bnep sunrpc iwlmvm intel_rapl_msr intel_rapl_common snd_sof_pci_intel_cnl x86_pkg_temp_thermal intel_powerclamp snd_sof_intel_hda_common mac80211 coretemp snd_soc_acpi_intel_match kvm_intel snd_soc_acpi snd_soc_hdac_hda snd_sof_pci snd_sof_xtensa_dsp snd_sof_intel_hda_mlink ---truncated--- | ||||
| CVE-2024-27058 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tmpfs: fix race on handling dquot rbtree A syzkaller reproducer found a race while attempting to remove dquot information from the rb tree. Fetching the rb_tree root node must also be protected by the dqopt->dqio_sem, otherwise, giving the right timing, shmem_release_dquot() will trigger a warning because it couldn't find a node in the tree, when the real reason was the root node changing before the search starts: Thread 1 Thread 2 - shmem_release_dquot() - shmem_{acquire,release}_dquot() - fetch ROOT - Fetch ROOT - acquire dqio_sem - wait dqio_sem - do something, triger a tree rebalance - release dqio_sem - acquire dqio_sem - start searching for the node, but from the wrong location, missing the node, and triggering a warning. | ||||