Filtered by vendor Redhat
Subscriptions
Filtered by product Enterprise Linux
Subscriptions
Total
15557 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2016-8743 | 4 Apache, Debian, Netapp and 1 more | 13 Http Server, Debian Linux, Clustered Data Ontap and 10 more | 2025-04-20 | 7.5 High |
| Apache HTTP Server, in all releases prior to 2.2.32 and 2.4.25, was liberal in the whitespace accepted from requests and sent in response lines and headers. Accepting these different behaviors represented a security concern when httpd participates in any chain of proxies or interacts with back-end application servers, either through mod_proxy or using conventional CGI mechanisms, and may result in request smuggling, response splitting and cache pollution. | ||||
| CVE-2016-6796 | 6 Apache, Canonical, Debian and 3 more | 16 Tomcat, Ubuntu Linux, Debian Linux and 13 more | 2025-04-20 | 7.5 High |
| A malicious web application running on Apache Tomcat 9.0.0.M1 to 9.0.0.M9, 8.5.0 to 8.5.4, 8.0.0.RC1 to 8.0.36, 7.0.0 to 7.0.70 and 6.0.0 to 6.0.45 was able to bypass a configured SecurityManager via manipulation of the configuration parameters for the JSP Servlet. | ||||
| CVE-2016-10142 | 2 Ietf, Redhat | 2 Ipv6, Enterprise Linux | 2025-04-20 | N/A |
| An issue was discovered in the IPv6 protocol specification, related to ICMP Packet Too Big (PTB) messages. (The scope of this CVE is all affected IPv6 implementations from all vendors.) The security implications of IP fragmentation have been discussed at length in [RFC6274] and [RFC7739]. An attacker can leverage the generation of IPv6 atomic fragments to trigger the use of fragmentation in an arbitrary IPv6 flow (in scenarios in which actual fragmentation of packets is not needed) and can subsequently perform any type of fragmentation-based attack against legacy IPv6 nodes that do not implement [RFC6946]. That is, employing fragmentation where not actually needed allows for fragmentation-based attack vectors to be employed, unnecessarily. We note that, unfortunately, even nodes that already implement [RFC6946] can be subject to DoS attacks as a result of the generation of IPv6 atomic fragments. Let us assume that Host A is communicating with Host B and that, as a result of the widespread dropping of IPv6 packets that contain extension headers (including fragmentation) [RFC7872], some intermediate node filters fragments between Host B and Host A. If an attacker sends a forged ICMPv6 PTB error message to Host B, reporting an MTU smaller than 1280, this will trigger the generation of IPv6 atomic fragments from that moment on (as required by [RFC2460]). When Host B starts sending IPv6 atomic fragments (in response to the received ICMPv6 PTB error message), these packets will be dropped, since we previously noted that IPv6 packets with extension headers were being dropped between Host B and Host A. Thus, this situation will result in a DoS scenario. Another possible scenario is that in which two BGP peers are employing IPv6 transport and they implement Access Control Lists (ACLs) to drop IPv6 fragments (to avoid control-plane attacks). If the aforementioned BGP peers drop IPv6 fragments but still honor received ICMPv6 PTB error messages, an attacker could easily attack the corresponding peering session by simply sending an ICMPv6 PTB message with a reported MTU smaller than 1280 bytes. Once the attack packet has been sent, the aforementioned routers will themselves be the ones dropping their own traffic. | ||||
| CVE-2015-7703 | 5 Debian, Netapp, Ntp and 2 more | 14 Debian Linux, Clustered Data Ontap, Data Ontap and 11 more | 2025-04-20 | 7.5 High |
| The "pidfile" or "driftfile" directives in NTP ntpd 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77, when ntpd is configured to allow remote configuration, allows remote attackers with an IP address that is allowed to send configuration requests, and with knowledge of the remote configuration password to write to arbitrary files via the :config command. | ||||
| CVE-2015-7501 | 1 Redhat | 22 Data Grid, Enterprise Linux, Jboss A-mq and 19 more | 2025-04-20 | N/A |
| Red Hat JBoss A-MQ 6.x; BPM Suite (BPMS) 6.x; BRMS 6.x and 5.x; Data Grid (JDG) 6.x; Data Virtualization (JDV) 6.x and 5.x; Enterprise Application Platform 6.x, 5.x, and 4.3.x; Fuse 6.x; Fuse Service Works (FSW) 6.x; Operations Network (JBoss ON) 3.x; Portal 6.x; SOA Platform (SOA-P) 5.x; Web Server (JWS) 3.x; Red Hat OpenShift/xPAAS 3.x; and Red Hat Subscription Asset Manager 1.3 allow remote attackers to execute arbitrary commands via a crafted serialized Java object, related to the Apache Commons Collections (ACC) library. | ||||
| CVE-2017-1000111 | 3 Debian, Linux, Redhat | 11 Debian Linux, Linux Kernel, Enterprise Linux and 8 more | 2025-04-20 | 7.8 High |
| Linux kernel: heap out-of-bounds in AF_PACKET sockets. This new issue is analogous to previously disclosed CVE-2016-8655. In both cases, a socket option that changes socket state may race with safety checks in packet_set_ring. Previously with PACKET_VERSION. This time with PACKET_RESERVE. The solution is similar: lock the socket for the update. This issue may be exploitable, we did not investigate further. As this issue affects PF_PACKET sockets, it requires CAP_NET_RAW in the process namespace. But note that with user namespaces enabled, any process can create a namespace in which it has CAP_NET_RAW. | ||||
| CVE-2016-6797 | 6 Apache, Canonical, Debian and 3 more | 15 Tomcat, Ubuntu Linux, Debian Linux and 12 more | 2025-04-20 | 7.5 High |
| The ResourceLinkFactory implementation in Apache Tomcat 9.0.0.M1 to 9.0.0.M9, 8.5.0 to 8.5.4, 8.0.0.RC1 to 8.0.36, 7.0.0 to 7.0.70 and 6.0.0 to 6.0.45 did not limit web application access to global JNDI resources to those resources explicitly linked to the web application. Therefore, it was possible for a web application to access any global JNDI resource whether an explicit ResourceLink had been configured or not. | ||||
| CVE-2017-5664 | 2 Apache, Redhat | 4 Tomcat, Enterprise Linux, Jboss Enterprise Application Platform and 1 more | 2025-04-20 | N/A |
| The error page mechanism of the Java Servlet Specification requires that, when an error occurs and an error page is configured for the error that occurred, the original request and response are forwarded to the error page. This means that the request is presented to the error page with the original HTTP method. If the error page is a static file, expected behaviour is to serve content of the file as if processing a GET request, regardless of the actual HTTP method. The Default Servlet in Apache Tomcat 9.0.0.M1 to 9.0.0.M20, 8.5.0 to 8.5.14, 8.0.0.RC1 to 8.0.43 and 7.0.0 to 7.0.77 did not do this. Depending on the original request this could lead to unexpected and undesirable results for static error pages including, if the DefaultServlet is configured to permit writes, the replacement or removal of the custom error page. Notes for other user provided error pages: (1) Unless explicitly coded otherwise, JSPs ignore the HTTP method. JSPs used as error pages must must ensure that they handle any error dispatch as a GET request, regardless of the actual method. (2) By default, the response generated by a Servlet does depend on the HTTP method. Custom Servlets used as error pages must ensure that they handle any error dispatch as a GET request, regardless of the actual method. | ||||
| CVE-2017-3737 | 3 Debian, Openssl, Redhat | 4 Debian Linux, Openssl, Enterprise Linux and 1 more | 2025-04-20 | N/A |
| OpenSSL 1.0.2 (starting from version 1.0.2b) introduced an "error state" mechanism. The intent was that if a fatal error occurred during a handshake then OpenSSL would move into the error state and would immediately fail if you attempted to continue the handshake. This works as designed for the explicit handshake functions (SSL_do_handshake(), SSL_accept() and SSL_connect()), however due to a bug it does not work correctly if SSL_read() or SSL_write() is called directly. In that scenario, if the handshake fails then a fatal error will be returned in the initial function call. If SSL_read()/SSL_write() is subsequently called by the application for the same SSL object then it will succeed and the data is passed without being decrypted/encrypted directly from the SSL/TLS record layer. In order to exploit this issue an application bug would have to be present that resulted in a call to SSL_read()/SSL_write() being issued after having already received a fatal error. OpenSSL version 1.0.2b-1.0.2m are affected. Fixed in OpenSSL 1.0.2n. OpenSSL 1.1.0 is not affected. | ||||
| CVE-2017-16997 | 2 Gnu, Redhat | 5 Glibc, Enterprise Linux, Enterprise Linux Desktop and 2 more | 2025-04-20 | N/A |
| elf/dl-load.c in the GNU C Library (aka glibc or libc6) 2.19 through 2.26 mishandles RPATH and RUNPATH containing $ORIGIN for a privileged (setuid or AT_SECURE) program, which allows local users to gain privileges via a Trojan horse library in the current working directory, related to the fillin_rpath and decompose_rpath functions. This is associated with misinterpretion of an empty RPATH/RUNPATH token as the "./" directory. NOTE: this configuration of RPATH/RUNPATH for a privileged program is apparently very uncommon; most likely, no such program is shipped with any common Linux distribution. | ||||
| CVE-2017-14491 | 13 Arista, Arubanetworks, Canonical and 10 more | 35 Eos, Arubaos, Ubuntu Linux and 32 more | 2025-04-20 | 9.8 Critical |
| Heap-based buffer overflow in dnsmasq before 2.78 allows remote attackers to cause a denial of service (crash) or execute arbitrary code via a crafted DNS response. | ||||
| CVE-2017-14064 | 4 Canonical, Debian, Redhat and 1 more | 11 Ubuntu Linux, Debian Linux, Enterprise Linux and 8 more | 2025-04-20 | N/A |
| Ruby through 2.2.7, 2.3.x through 2.3.4, and 2.4.x through 2.4.1 can expose arbitrary memory during a JSON.generate call. The issues lies in using strdup in ext/json/ext/generator/generator.c, which will stop after encountering a '\0' byte, returning a pointer to a string of length zero, which is not the length stored in space_len. | ||||
| CVE-2017-12172 | 2 Postgresql, Redhat | 4 Postgresql, Enterprise Linux, Rhel Software Collections and 1 more | 2025-04-20 | N/A |
| PostgreSQL 10.x before 10.1, 9.6.x before 9.6.6, 9.5.x before 9.5.10, 9.4.x before 9.4.15, 9.3.x before 9.3.20, and 9.2.x before 9.2.24 runs under a non-root operating system account, and database superusers have effective ability to run arbitrary code under that system account. PostgreSQL provides a script for starting the database server during system boot. Packages of PostgreSQL for many operating systems provide their own, packager-authored startup implementations. Several implementations use a log file name that the database superuser can replace with a symbolic link. As root, they open(), chmod() and/or chown() this log file name. This often suffices for the database superuser to escalate to root privileges when root starts the server. | ||||
| CVE-2016-6816 | 2 Apache, Redhat | 4 Tomcat, Enterprise Linux, Jboss Enterprise Application Platform and 1 more | 2025-04-20 | N/A |
| The code in Apache Tomcat 9.0.0.M1 to 9.0.0.M11, 8.5.0 to 8.5.6, 8.0.0.RC1 to 8.0.38, 7.0.0 to 7.0.72, and 6.0.0 to 6.0.47 that parsed the HTTP request line permitted invalid characters. This could be exploited, in conjunction with a proxy that also permitted the invalid characters but with a different interpretation, to inject data into the HTTP response. By manipulating the HTTP response the attacker could poison a web-cache, perform an XSS attack and/or obtain sensitive information from requests other then their own. | ||||
| CVE-2016-5546 | 2 Oracle, Redhat | 7 Jdk, Jre, Jrockit and 4 more | 2025-04-20 | N/A |
| Vulnerability in the Java SE, Java SE Embedded, JRockit component of Oracle Java SE (subcomponent: Libraries). Supported versions that are affected are Java SE: 6u131, 7u121 and 8u112; Java SE Embedded: 8u111; JRockit: R28.3.12. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Java SE, Java SE Embedded, JRockit. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Java SE, Java SE Embedded, JRockit accessible data. Note: Applies to client and server deployment of Java. This vulnerability can be exploited through sandboxed Java Web Start applications and sandboxed Java applets. It can also be exploited by supplying data to APIs in the specified Component without using sandboxed Java Web Start applications or sandboxed Java applets, such as through a web service. CVSS v3.0 Base Score 7.5 (Integrity impacts). | ||||
| CVE-2016-5547 | 2 Oracle, Redhat | 7 Jdk, Jre, Jrockit and 4 more | 2025-04-20 | N/A |
| Vulnerability in the Java SE, Java SE Embedded, JRockit component of Oracle Java SE (subcomponent: Libraries). Supported versions that are affected are Java SE: 7u121 and 8u112; Java SE Embedded: 8u111; JRockit: R28.3.12. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Java SE, Java SE Embedded, JRockit. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Java SE, Java SE Embedded, JRockit. Note: Applies to client and server deployment of Java. This vulnerability can be exploited through sandboxed Java Web Start applications and sandboxed Java applets. It can also be exploited by supplying data to APIs in the specified Component without using sandboxed Java Web Start applications or sandboxed Java applets, such as through a web service. CVSS v3.0 Base Score 5.3 (Availability impacts). | ||||
| CVE-2016-5548 | 2 Oracle, Redhat | 6 Jdk, Jre, Enterprise Linux and 3 more | 2025-04-20 | N/A |
| Vulnerability in the Java SE, Java SE Embedded component of Oracle Java SE (subcomponent: Libraries). Supported versions that are affected are Java SE: 6u131, 7u121 and 8u112; Java SE Embedded: 8u111. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Java SE, Java SE Embedded. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Java SE, Java SE Embedded accessible data. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability does not apply to Java deployments, typically in servers, that load and run only trusted code (e.g., code installed by an administrator). CVSS v3.0 Base Score 6.5 (Confidentiality impacts). | ||||
| CVE-2017-7184 | 3 Canonical, Linux, Redhat | 8 Ubuntu Linux, Linux Kernel, Enterprise Linux and 5 more | 2025-04-20 | 7.8 High |
| The xfrm_replay_verify_len function in net/xfrm/xfrm_user.c in the Linux kernel through 4.10.6 does not validate certain size data after an XFRM_MSG_NEWAE update, which allows local users to obtain root privileges or cause a denial of service (heap-based out-of-bounds access) by leveraging the CAP_NET_ADMIN capability, as demonstrated during a Pwn2Own competition at CanSecWest 2017 for the Ubuntu 16.10 linux-image-* package 4.8.0.41.52. | ||||
| CVE-2017-9148 | 2 Freeradius, Redhat | 2 Freeradius, Enterprise Linux | 2025-04-20 | N/A |
| The TLS session cache in FreeRADIUS 2.1.1 through 2.1.7, 3.0.x before 3.0.14, 3.1.x before 2017-02-04, and 4.0.x before 2017-02-04 fails to reliably prevent resumption of an unauthenticated session, which allows remote attackers (such as malicious 802.1X supplicants) to bypass authentication via PEAP or TTLS. | ||||
| CVE-2015-1795 | 1 Redhat | 3 Enterprise Linux, Gluster Storage, Storage | 2025-04-20 | N/A |
| Red Hat Gluster Storage RPM Package 3.2 allows local users to gain privileges and execute arbitrary code as root. | ||||