Total
831 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64338 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: misc: uss720: unregister parport on probe failure uss720_probe() registers a parport before reading the 1284 register used to detect unsupported Belkin F5U002 adapters. If get_1284_register() fails, the error path drops the driver private data and the USB device reference, but leaves the parport device registered. Leaving the port registered is more than a private allocation leak: parport_register_port() has already reserved a parport number and registered the parport bus device, while pp->private_data still points at the private data that the common error path is about to release. Undo the pre-announce registration in the get_1284_register() failure branch before jumping to the common private-data cleanup path. Clear priv->pp first, matching the disconnect path and avoiding a stale pointer in the private data. This issue was identified during our ongoing static-analysis research while reviewing kernel code. | ||||
| CVE-2026-64381 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: Fix next buffer leak in receive_encrypted_standard() receive_encrypted_standard() allocates next_buffer before checking whether the number of compound PDUs already reached MAX_COMPOUND. If the limit check fails, the function returns immediately and the newly allocated next_buffer is not assigned to server->smallbuf/server->bigbuf, making it leaked. Move the MAX_COMPOUND check before allocating next_buffer. | ||||
| CVE-2026-64022 | 1 Linux | 1 Linux Kernel | 2026-07-29 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: aggregator: remove the software node when deactivating the aggregator The dynamic software node we create for the aggregator platform device when using configfs is leaked when the device is deactivated. Destroy it as the last step in the tear-down path. | ||||
| CVE-2026-64494 | 1 Linux | 1 Linux Kernel | 2026-07-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: gp2ap002: fix runtime PM leak on read error gp2ap002_read_raw() calls pm_runtime_get_sync() before reading the lux value, but if gp2ap002_get_lux() fails, it returns directly. This skips the pm_runtime_put_autosuspend() call at the "out" label, permanently leaking a runtime PM reference and preventing the device from autosuspending. Replace the direct return with a "goto out" to ensure the reference is properly dropped on the error path. | ||||
| CVE-2026-56116 | 2 Dhcpcd Project, Networkconfiguration | 2 Dhcpcd, Dhcpcd | 2026-07-28 | 6.5 Medium |
| dhcpcd through 10.3.2, fixed in commit 708b4a5, contains a memory leak vulnerability in the IPv6 Router Advertisement route information handling that allows an unauthenticated same-link attacker to cause denial of service by sending crafted Router Advertisements. Attackers can repeatedly send Router Advertisements containing Route Information options with a lifetime of zero, triggering unfreed allocations in routeinfo_findalloc() that cause linear memory exhaustion and eventual daemon crash. | ||||
| CVE-2026-41637 | 1 Nlnetlabs | 1 Unbound | 2026-07-27 | 3.7 Low |
| In NLnet Labs Unbound 1.22.0 up to and including 1.25.1, client terminated DNS-over-QUIC (DoQ) queries are not accounted properly by Unbound resulting in low-cost inflation of the waiting number of replies for already in-flight resolution queries. This results in degradation of resolution service for new clients for already in-flight queries. A malicious actor can exploit the vulnerability by issuing DoQ queries for query names that need resolution and proceeding on immediately terminating the query by one of STOP_SENDING/RESET_STREAM/CONNECTION_CLOSE QUIC frames. Those terminated DoQ queries are not properly counted for and keep inflating the number of waiting replies for in-flight queries. When the maximum is reached, it results in silent query drops for new clients needing resolution for already in-flight queries. This vulnerability needs Unbound to be compiled with DoQ support ('--with-libngtcp2') and the 'quic-port' to be configured for the listening interfaces. Additionally, a malicious actor needs access to multiple source IPs to bypass the by-default configured 'wait-limit' option. | ||||
| CVE-2026-56745 | 1 Netty | 1 Netty | 2026-07-27 | 7.5 High |
| Netty is a network application framework for development of protocol servers and clients. In versions 4.2.0.Final through 4.2.15.Final and 4.1.0.Final through 4.1.135.Final, the `SpdyHttpDecoder` handler in Netty's SPDY-to-HTTP codec allocates a pooled `ByteBuf` when processing a client-initiated `SYN_STREAM` frame with `FLAG_FIN=0` and stores the partially constructed `FullHttpRequest` in `messageMap`; when the remote peer sends `RST_STREAM` for that stream or the accumulated content exceeds `maxContentLength`, the decoder removes the entry but does not release the pooled `ByteBuf`, causing native memory exhaustion. This issue is fixed in versions 4.1.136.Final and 4.2.16.Final. | ||||
| CVE-2026-64499 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: ti-ads1119: fix PM reference leak in buffer preenable ads1119_triggered_buffer_preenable() resumes the device with pm_runtime_resume_and_get() before starting a conversion. If i2c_smbus_write_byte() fails, the function returns the error directly and leaves the runtime PM usage counter elevated. The matching postdisable callback is not called when preenable fails, so the reference is leaked and the device may remain runtime-active indefinitely. Store the I2C transfer result in ret and drop the runtime PM reference on failure before returning the error. | ||||
| CVE-2026-64503 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: accel: kxsd9: fix runtime PM imbalance on write_raw() error kxsd9_write_raw() takes a runtime PM reference with pm_runtime_get_sync() but returns -EINVAL directly when a scale with a non-zero integer part is requested, skipping the matching pm_runtime_put_autosuspend(). This leaks a runtime PM usage-counter reference on every such write, after which the device can no longer autosuspend. Set the error code and fall through to the existing put instead of returning early. | ||||
| CVE-2026-64281 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: wake sq waiters when the transport closes Threads parked in svc_rdma_sq_wait() on sc_sq_ticket_wait or sc_send_wait can hang indefinitely in TASK_UNINTERRUPTIBLE state across transport teardown, pinning svc_xprt references and blocking svc_rdma_free(). The close path sets XPT_CLOSE before invoking xpo_detach and both wait_event predicates include an XPT_CLOSE term, but the predicates are re-evaluated only on wakeup. sc_sq_ticket_wait has no completion-driven wake path; it is advanced solely by the chained ticket handoff inside svc_rdma_sq_wait() itself. Without an explicit wake at close, parked threads never observe XPT_CLOSE, hold their svc_xprt_get reference forever, and svc_rdma_free() blocks on xpt_ref dropping to zero. Two close entry points reach this transport. Local teardown runs svc_rdma_detach() from svc_handle_xprt() -> svc_delete_xprt() -> xpo_detach() on a worker thread. A remote disconnect arrives at svc_rdma_cma_handler(), which calls svc_xprt_deferred_close(): that sets XPT_CLOSE and enqueues the transport but does not access either RDMA waitqueue, so a worker already parked in svc_rdma_sq_wait() never re-evaluates its predicate. With every worker parked on this transport, no thread is available to run the local teardown either, and the wake site there is unreachable. Introduce svc_rdma_xprt_deferred_close(), a thin svcrdma wrapper that calls svc_xprt_deferred_close() and then wakes both sc_sq_ticket_wait and sc_send_wait. Convert the svcrdma producers that called svc_xprt_deferred_close() directly: svc_rdma_cma_handler(), qp_event_handler(), svc_rdma_post_send_err(), svc_rdma_wc_send(), the sendto drop path, the rw completion error paths, and the recvfrom flush and read-list error paths. Wake both waitqueues from svc_rdma_detach() as well. The synchronous svc_xprt_close() path (backchannel ENOTCONN, device removal via svc_rdma_xprt_done) reaches detach without flowing through svc_xprt_deferred_close() and therefore does not invoke the new helper. [ cel: add svc_rdma_xprt_deferred_close() to complete the fix ] | ||||
| CVE-2026-63880 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix lock leak on ENOMEM in AMDGPU_GEM_OP_GET_MAPPING_INFO The AMDGPU_GEM_OP_GET_MAPPING_INFO branch of amdgpu_gem_op_ioctl() holds three cleanup-tracked resources before calling kvcalloc(): the drm_gem_object reference from drm_gem_object_lookup(), the drm_exec lock on the looked-up GEM via drm_exec_lock_obj(), and the drm_exec lock on the per-process VM root page directory via amdgpu_vm_lock_pd(). All three are released by the out_exec label that every other error path in this function jumps to. The kvcalloc() failure path returns -ENOMEM directly, skipping out_exec and leaking all three. The leaked per-process VM root PD dma_resv lock is the load-bearing leak: any subsequent operation on the same VM (further GEM ops, command-submission, eviction, TTM shrinker callbacks) blocks on the held lock. DRM_IOCTL_AMDGPU_GEM_OP is DRM_AUTH | DRM_RENDER_ALLOW, so this is an unprivileged-local denial of service against the caller's GPU context, reachable by any process with /dev/dri/renderD* access. Route the failure through out_exec so drm_exec_fini() and drm_gem_object_put() run. Reproduced on stock 7.0.0-10, Ryzen 7 5700U / Radeon Vega (Lucienne): the failing ioctl returns -ENOMEM and a second GET_MAPPING_INFO on the same fd then blocks in drm_exec_lock_obj() on the leaked dma_resv. SIGKILL on the caller does not reap the task; the fd-release path during process exit goes through amdgpu_gem_object_close() -> drm_exec_prepare_obj() on the same lock, leaving the task in D state until the box is rebooted. The patched kernel was not rebuilt and re-tested on this hardware; the fix is mechanical. Tested on a single Lucienne / Vega box only. Ziyi Guo posted an independent INT_MAX-bound check for args->num_entries in the same branch [1]; the two patches are complementary and can land in either order. (cherry picked from commit b69d3256d79de15f54c322986ff4da68f1d65b0a) | ||||
| CVE-2026-64003 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: core: Run queues for all non-SDEV_DEL devices from scsi_run_host_queues While a SCSI host is in a recovery state, scsi_mq_requeue_cmd() will not set the requeue list for a requeued command to be kicked in the future. The expectation is a call to scsi_run_host_queues() will kick all SCSI devices once the recovery state is cleared. However, scsi_run_host_queues() uses shost_for_each_device() which uses scsi_device_get() and so will ignore devices in a partially removed state like SDEV_CANCEL. But these devices may also have requeued requests, leaving their requests stuck from not being kicked and causing the removal process of the device to hang. scsi_run_host_queues() needs to run against more devices than the macro shost_for_each_device() allows. Instead of using the too limiting scsi_device_get() state checks, only ignore devices in SDEV_DEL state or when unable to acquire a reference. Attempt to run the queues for all other devices when scsi_run_host_queues() is called. | ||||
| CVE-2026-64013 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: button: Fix ACPI GPE handler leak during removal Commit a7e23ec17fee ("ACPI: button: Install notifier for system events as well") changed the ACPI notify handler type for ACPI buttons to ACPI_ALL_NOTIFY, but it forgot to update acpi_button_remove() to reflect that change. This leads to leaking the notify handler past driver removal, which may cause a kernel crash to occur if ACPI notify on the given device is triggered after removing the driver, and causes a subsequent probe of the given device with the same driver to fail. Address this by updating the acpi_remove_notify_handler() call in acpi_button_remove() as appropriate. | ||||
| CVE-2026-64110 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: igc: fix potential skb leak in igc_fpe_xmit_smd_frame() When igc_fpe_init_tx_descriptor() fails, no one takes care of an allocated skb, leaking it. [1] Use dev_kfree_skb_any() on failure. Tested on an I226 adapter with the following command, while injecting faults in igc_fpe_init_tx_descriptor() to trigger the error path. # ethtool --set-mm $DEV verify-enabled on tx-enabled on pmac-enabled on [1] unreferenced object 0xffff888113c6cdc0 (size 224): ... backtrace (crc be3d3fda): kmem_cache_alloc_node_noprof+0x3b1/0x410 __alloc_skb+0xde/0x830 igc_fpe_xmit_smd_frame.isra.0+0xad/0x1b0 igc_fpe_send_mpacket+0x37/0x90 ethtool_mmsv_verify_timer+0x15e/0x300 | ||||
| CVE-2026-64282 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Don't leak PFN when kvm_translate_vncr() races MMU notifier In the case that kvm_translate_vncr() races with an MMU notifier the early return does not release a reference on the faulted in PFN. Add the necessary call to kvm_release_faultin_page() for the unused PFN. | ||||
| CVE-2026-64509 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rust: block: fix GenDisk cleanup paths GenDiskBuilder::build() still has fallible work after __blk_mq_alloc_disk(), but its error path only recovers the foreign queue data. That leaks the temporary gendisk and request_queue until later teardown. If the caller moved the last Arc<TagSet<T>> into build(), the leaked queue can retain blk-mq state after the tag set is dropped. Fix the pre-registration failure path by dropping the temporary gendisk reference with put_disk() before recovering queue_data, so disk_release() can tear down the owned queue. Also pair GenDisk::drop() with put_disk() after del_gendisk(). Once a Rust GenDisk has been added with device_add_disk(), del_gendisk() only unregisters it; the final gendisk reference still has to be dropped to complete the release path. | ||||
| CVE-2026-64498 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: buffer: hw-consumer: free scan_mask on buffer release The scan_mask lifetime changed in commit 9a2e1233d38c ("iio: buffer: hw-consumer: remove redundant scan_mask flexible array"). Before that change, the scan mask storage was embedded in struct hw_consumer_buffer, so iio_hw_buf_release() could free the whole allocation with a single kfree(hw_buf). That commit moved the scan mask to a separate bitmap_zalloc() allocation stored in buffer.scan_mask, but left iio_hw_buf_release() unchanged. Free the scan mask in iio_hw_buf_release() before freeing the buffer wrapper. | ||||
| CVE-2026-64464 | 1 Linux | 1 Linux Kernel | 2026-07-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xhci: sideband: fix ring sg table pages leak xhci_ring_to_sgtable() allocates a temporary pages array and uses it to build the returned sg_table with sg_alloc_table_from_pages(). The error paths free the pages array, but the success path returns the sg_table without freeing it. This leaks the temporary array every time a sideband client gets an endpoint or event ring buffer. Free the pages array after sg_alloc_table_from_pages() succeeds. The returned sg_table has its own scatterlist entries and does not depend on the temporary array after construction. | ||||
| CVE-2026-64350 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: cdnsp: fix stream context array leak in cdnsp_alloc_stream_info() cdnsp_alloc_stream_info() allocates stream_info->stream_ctx_array with cdnsp_alloc_stream_ctx(). If a later stream ring allocation or stream mapping update fails, the error path frees the allocated stream rings and stream_rings array, but leaves stream_ctx_array allocated. Free the stream context array before falling through to the stream_rings cleanup path. | ||||
| CVE-2026-64348 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: free iso schedules on failed submit EHCI and FOTG210 isochronous submits build an ehci_iso_sched before linking the URB to the endpoint queue, and keep the staged schedule in urb->hcpriv until iso_stream_schedule() and the link helpers consume it. If the controller is no longer accessible, or usb_hcd_link_urb_to_ep() fails, submit jumps to done_not_linked before that handoff happens and leaks the staged schedule still attached to urb->hcpriv. Free the staged schedule from done_not_linked when submit fails before the URB is linked and clear urb->hcpriv after the free. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. As we do not have an EHCI host controller with a USB isochronous device to test with, no runtime testing was able to be performed. | ||||