Total
199 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-56716 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netdevsim: prevent bad user input in nsim_dev_health_break_write() If either a zero count or a large one is provided, kernel can crash. | ||||
| CVE-2024-43897 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: drop bad gso csum_start and offset in virtio_net_hdr Tighten csum_start and csum_offset checks in virtio_net_hdr_to_skb for GSO packets. The function already checks that a checksum requested with VIRTIO_NET_HDR_F_NEEDS_CSUM is in skb linear. But for GSO packets this might not hold for segs after segmentation. Syzkaller demonstrated to reach this warning in skb_checksum_help offset = skb_checksum_start_offset(skb); ret = -EINVAL; if (WARN_ON_ONCE(offset >= skb_headlen(skb))) By injecting a TSO packet: WARNING: CPU: 1 PID: 3539 at net/core/dev.c:3284 skb_checksum_help+0x3d0/0x5b0 ip_do_fragment+0x209/0x1b20 net/ipv4/ip_output.c:774 ip_finish_output_gso net/ipv4/ip_output.c:279 [inline] __ip_finish_output+0x2bd/0x4b0 net/ipv4/ip_output.c:301 iptunnel_xmit+0x50c/0x930 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x2296/0x2c70 net/ipv4/ip_tunnel.c:813 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x759/0xa60 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4850 [inline] netdev_start_xmit include/linux/netdevice.h:4864 [inline] xmit_one net/core/dev.c:3595 [inline] dev_hard_start_xmit+0x261/0x8c0 net/core/dev.c:3611 __dev_queue_xmit+0x1b97/0x3c90 net/core/dev.c:4261 packet_snd net/packet/af_packet.c:3073 [inline] The geometry of the bad input packet at tcp_gso_segment: [ 52.003050][ T8403] skb len=12202 headroom=244 headlen=12093 tailroom=0 [ 52.003050][ T8403] mac=(168,24) mac_len=24 net=(192,52) trans=244 [ 52.003050][ T8403] shinfo(txflags=0 nr_frags=1 gso(size=1552 type=3 segs=0)) [ 52.003050][ T8403] csum(0x60000c7 start=199 offset=1536 ip_summed=3 complete_sw=0 valid=0 level=0) Mitigate with stricter input validation. csum_offset: for GSO packets, deduce the correct value from gso_type. This is already done for USO. Extend it to TSO. Let UFO be: udp[46]_ufo_fragment ignores these fields and always computes the checksum in software. csum_start: finding the real offset requires parsing to the transport header. Do not add a parser, use existing segmentation parsing. Thanks to SKB_GSO_DODGY, that also catches bad packets that are hw offloaded. Again test both TSO and USO. Do not test UFO for the above reason, and do not test UDP tunnel offload. GSO packet are almost always CHECKSUM_PARTIAL. USO packets may be CHECKSUM_NONE since commit 10154dbded6d6 ("udp: Allow GSO transmit from devices with no checksum offload"), but then still these fields are initialized correctly in udp4_hwcsum/udp6_hwcsum_outgoing. So no need to test for ip_summed == CHECKSUM_PARTIAL first. This revises an existing fix mentioned in the Fixes tag, which broke small packets with GSO offload, as detected by kselftests. | ||||
| CVE-2021-47251 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mac80211: fix skb length check in ieee80211_scan_rx() Replace hard-coded compile-time constants for header length check with dynamic determination based on the frame type. Otherwise, we hit a validation WARN_ON in cfg80211 later. [style fixes, reword commit message] | ||||
| CVE-2022-20445 | 1 Google | 1 Android | 2025-05-01 | 7.5 High |
| In process_service_search_rsp of sdp_discovery.cc, there is a possible out of bounds read due to improper input validation. This could lead to remote information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-10 Android-11 Android-12 Android-12L Android-13Android ID: A-225876506 | ||||
| CVE-2022-36938 | 1 Facebook | 1 Redex | 2025-05-01 | 9.8 Critical |
| DexLoader function get_stringidx_fromdex() in Redex prior to commit 3b44c64 can load an out of bound address when loading the string index table, potentially allowing remote code execution during processing of a 3rd party Android APK file. | ||||
| CVE-2025-46656 | 2025-04-29 | 2.9 Low | ||
| python-markdownify (aka markdownify) before 0.14.1 allows large headline prefixes such as <h9999999> in addition to <h1> through <h6>. This causes memory consumption. | ||||
| CVE-2025-3511 | 2025-04-29 | 5.9 Medium | ||
| Improper Validation of Specified Quantity in Input vulnerability in Mitsubishi Electric Corporation CC-Link IE TSN Remote I/O module, CC-Link IE TSN Analog-Digital Converter module, CC-Link IE TSN Digital-Analog Converter module, CC-Link IE TSN FPGA module and CC-Link IE TSN Remote Station Communication LSI CP620 with GbE-PHY allows a remote unauthenticated attacker to cause a Denial of Service condition in the products by sending specially crafted UDP packets. | ||||
| CVE-2022-4111 | 1 Tooljet | 1 Tooljet | 2025-04-24 | 6.5 Medium |
| Unrestricted file size limit can lead to DoS in tooljet/tooljet <1.27 by allowing a logged in attacker to upload profile pictures over 2MB. | ||||
| CVE-2022-23635 | 2 Istio, Redhat | 2 Istio, Service Mesh | 2025-04-23 | 7.5 High |
| Istio is an open platform to connect, manage, and secure microservices. In affected versions the Istio control plane, `istiod`, is vulnerable to a request processing error, allowing a malicious attacker that sends a specially crafted message which results in the control plane crashing. This endpoint is served over TLS port 15012, but does not require any authentication from the attacker. For simple installations, Istiod is typically only reachable from within the cluster, limiting the blast radius. However, for some deployments, especially [multicluster](https://istio.io/latest/docs/setup/install/multicluster/primary-remote/) topologies, this port is exposed over the public internet. There are no effective workarounds, beyond upgrading. Limiting network access to Istiod to the minimal set of clients can help lessen the scope of the vulnerability to some extent. | ||||
| CVE-2022-24754 | 2 Debian, Teluu | 2 Debian Linux, Pjsip | 2025-04-23 | 8.5 High |
| PJSIP is a free and open source multimedia communication library written in C language. In versions prior to and including 2.12 PJSIP there is a stack-buffer overflow vulnerability which only impacts PJSIP users who accept hashed digest credentials (credentials with data_type `PJSIP_CRED_DATA_DIGEST`). This issue has been patched in the master branch of the PJSIP repository and will be included with the next release. Users unable to upgrade need to check that the hashed digest data length must be equal to `PJSIP_MD5STRLEN` before passing to PJSIP. | ||||
| CVE-2022-24903 | 5 Debian, Fedoraproject, Netapp and 2 more | 10 Debian Linux, Fedora, Active Iq Unified Manager and 7 more | 2025-04-23 | 8.1 High |
| Rsyslog is a rocket-fast system for log processing. Modules for TCP syslog reception have a potential heap buffer overflow when octet-counted framing is used. This can result in a segfault or some other malfunction. As of our understanding, this vulnerability can not be used for remote code execution. But there may still be a slight chance for experts to do that. The bug occurs when the octet count is read. While there is a check for the maximum number of octets, digits are written to a heap buffer even when the octet count is over the maximum, This can be used to overrun the memory buffer. However, once the sequence of digits stop, no additional characters can be added to the buffer. In our opinion, this makes remote exploits impossible or at least highly complex. Octet-counted framing is one of two potential framing modes. It is relatively uncommon, but enabled by default on receivers. Modules `imtcp`, `imptcp`, `imgssapi`, and `imhttp` are used for regular syslog message reception. It is best practice not to directly expose them to the public. When this practice is followed, the risk is considerably lower. Module `imdiag` is a diagnostics module primarily intended for testbench runs. We do not expect it to be present on any production installation. Octet-counted framing is not very common. Usually, it needs to be specifically enabled at senders. If users do not need it, they can turn it off for the most important modules. This will mitigate the vulnerability. | ||||
| CVE-2025-32415 | 1 Xmlsoft | 1 Libxml2 | 2025-04-23 | 2.9 Low |
| In libxml2 before 2.13.8 and 2.14.x before 2.14.2, xmlSchemaIDCFillNodeTables in xmlschemas.c has a heap-based buffer under-read. To exploit this, a crafted XML document must be validated against an XML schema with certain identity constraints, or a crafted XML schema must be used. | ||||
| CVE-2022-35928 | 1 Aescrypt | 1 Aes Crypt | 2025-04-23 | 8.4 High |
| AES Crypt is a file encryption software for multiple platforms. AES Crypt for Linux built using the source on GitHub and having the version number 3.11 has a vulnerability with respect to reading user-provided passwords and confirmations via command-line prompts. Passwords lengths were not checked before being read. This vulnerability may lead to buffer overruns. This does _not_ affect source code found on aescrypt.com, nor is the vulnerability present when providing a password or a key via the `-p` or `-k` command-line options. The problem was fixed via in commit 68761851b and will be included in release 3.16. Users are advised to upgrade. Users unable to upgrade should us the `-p` or `-k` options to provide a password or key. | ||||
| CVE-2022-39272 | 1 Fluxcd | 7 Flux2, Helm-controller, Image-automation-controller and 4 more | 2025-04-23 | 5 Medium |
| Flux is an open and extensible continuous delivery solution for Kubernetes. Versions prior to 0.35.0 are subject to a Denial of Service. Users that have permissions to change Flux’s objects, either through a Flux source or directly within a cluster, can provide invalid data to fields `.spec.interval` or `.spec.timeout` (and structured variations of these fields), causing the entire object type to stop being processed. This issue is patched in version 0.35.0. As a workaround, Admission controllers can be employed to restrict the values that can be used for fields `.spec.interval` and `.spec.timeout`, however upgrading to the latest versions is still the recommended mitigation. | ||||
| CVE-2022-39313 | 1 Parseplatform | 1 Parse-server | 2025-04-23 | 7.5 High |
| Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Versions prior to 4.10.17, and prior to 5.2.8 on the 5.x branch, crash when a file download request is received with an invalid byte range, resulting in a Denial of Service. This issue has been patched in versions 4.10.17, and 5.2.8. There are no known workarounds. | ||||
| CVE-2022-39294 | 1 Conduit-hyper Project | 1 Conduit-hyper | 2025-04-23 | 7.5 High |
| conduit-hyper integrates a conduit application with the hyper server. Prior to version 0.4.2, `conduit-hyper` did not check any limit on a request's length before calling [`hyper::body::to_bytes`](https://docs.rs/hyper/latest/hyper/body/fn.to_bytes.html). An attacker could send a malicious request with an abnormally large `Content-Length`, which could lead to a panic if memory allocation failed for that request. In version 0.4.2, `conduit-hyper` sets an internal limit of 128 MiB per request, otherwise returning status 400 ("Bad Request"). This crate is part of the implementation of Rust's [crates.io](https://crates.io/), but that service is not affected due to its existing cloud infrastructure, which already drops such malicious requests. Even with the new limit in place, `conduit-hyper` is not recommended for production use, nor to directly serve the public Internet. | ||||
| CVE-2022-41968 | 1 Nextcloud | 1 Nextcloud Server | 2025-04-23 | 3.5 Low |
| Nextcloud Server is an open source personal cloud server. Prior to versions 23.0.10 and 24.0.5, calendar name lengths are not validated before writing to a database. As a result, an attacker can send unnecessary amounts of data against the database. Version 23.0.10 and 24.0.5 contain patches for the issue. No known workarounds are available. | ||||
| CVE-2022-23580 | 1 Google | 1 Tensorflow | 2025-04-22 | 6.5 Medium |
| Tensorflow is an Open Source Machine Learning Framework. During shape inference, TensorFlow can allocate a large vector based on a value from a tensor controlled by the user. The fix will be included in TensorFlow 2.8.0. We will also cherrypick this commit on TensorFlow 2.7.1, TensorFlow 2.6.3, and TensorFlow 2.5.3, as these are also affected and still in supported range. | ||||
| CVE-2022-29200 | 1 Google | 1 Tensorflow | 2025-04-22 | 5.5 Medium |
| TensorFlow is an open source platform for machine learning. Prior to versions 2.9.0, 2.8.1, 2.7.2, and 2.6.4, the implementation of `tf.raw_ops.LSTMBlockCell` does not fully validate the input arguments. This results in a `CHECK`-failure which can be used to trigger a denial of service attack. The code does not validate the ranks of any of the arguments to this API call. This results in `CHECK`-failures when the elements of the tensor are accessed. Versions 2.9.0, 2.8.1, 2.7.2, and 2.6.4 contain a patch for this issue. | ||||
| CVE-2022-29196 | 1 Google | 1 Tensorflow | 2025-04-22 | 5.5 Medium |
| TensorFlow is an open source platform for machine learning. Prior to versions 2.9.0, 2.8.1, 2.7.2, and 2.6.4, the implementation of `tf.raw_ops.Conv3DBackpropFilterV2` does not fully validate the input arguments. This results in a `CHECK`-failure which can be used to trigger a denial of service attack. The code does not validate that the `filter_sizes` argument is a vector. Versions 2.9.0, 2.8.1, 2.7.2, and 2.6.4 contain a patch for this issue. | ||||