Filtered by vendor Redhat
Subscriptions
Filtered by product Enterprise Linux
Subscriptions
Total
15852 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-4418 | 1 Redhat | 3 Advanced Virtualization, Enterprise Linux, Rhel Eus | 2026-04-15 | 6.2 Medium |
| A race condition leading to a stack use-after-free flaw was found in libvirt. Due to a bad assumption in the virNetClientIOEventLoop() method, the `data` pointer to a stack-allocated virNetClientIOEventData structure ended up being used in the virNetClientIOEventFD callback while the data pointer's stack frame was concurrently being "freed" when returning from virNetClientIOEventLoop(). The 'virtproxyd' daemon can be used to trigger requests. If libvirt is configured with fine-grained access control, this issue, in theory, allows a user to escape their otherwise limited access. This flaw allows a local, unprivileged user to access virtproxyd without authenticating. Remote users would need to authenticate before they could access it. | ||||
| CVE-2025-32801 | 1 Redhat | 1 Enterprise Linux | 2026-04-15 | 7.8 High |
| Kea configuration and API directives can be used to load a malicious hook library. Many common configurations run Kea as root, leave the API entry points unsecured by default, and/or place the control sockets in insecure paths. This issue affects Kea versions 2.4.0 through 2.4.1, 2.6.0 through 2.6.2, and 2.7.0 through 2.7.8. | ||||
| CVE-2024-57970 | 1 Redhat | 1 Enterprise Linux | 2026-04-15 | 4 Medium |
| libarchive through 3.7.7 has a heap-based buffer over-read in header_gnu_longlink in archive_read_support_format_tar.c via a TAR archive because it mishandles truncation in the middle of a GNU long linkname. | ||||
| CVE-2023-31315 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2026-04-15 | 7.5 High |
| Improper validation in a model specific register (MSR) could allow a malicious program with ring0 access to modify SMM configuration while SMI lock is enabled, potentially leading to arbitrary code execution. | ||||
| CVE-2024-2201 | 1 Redhat | 4 Enterprise Linux, Rhel Els, Rhel Eus and 1 more | 2026-04-15 | 4.7 Medium |
| A cross-privilege Spectre v2 vulnerability allows attackers to bypass all deployed mitigations, including the recent Fine(IBT), and to leak arbitrary Linux kernel memory on Intel systems. | ||||
| CVE-2024-9979 | 1 Redhat | 2 Ansible Automation Platform, Enterprise Linux | 2026-04-15 | 5.3 Medium |
| A flaw was found in PyO3. This vulnerability causes a use-after-free issue, potentially leading to memory corruption or crashes via unsound borrowing from weak Python references. | ||||
| CVE-2025-12744 | 1 Redhat | 1 Enterprise Linux | 2026-04-15 | 8.8 High |
| A flaw was found in the ABRT daemon’s handling of user-supplied mount information.ABRT copies up to 12 characters from an untrusted input and places them directly into a shell command (docker inspect %s) without proper validation. An unprivileged local user can craft a payload that injects shell metacharacters, causing the root-running ABRT process to execute attacker-controlled commands and ultimately gain full root privileges. | ||||
| CVE-2023-31356 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2026-04-15 | 4.4 Medium |
| Incomplete system memory cleanup in SEV firmware could allow a privileged attacker to corrupt guest private memory, potentially resulting in a loss of data integrity. | ||||
| CVE-2025-29786 | 1 Redhat | 5 Enterprise Linux, Openshift Custom Metrics Autoscaler, Openshift Distributed Tracing and 2 more | 2026-04-15 | 7.5 High |
| Expr is an expression language and expression evaluation for Go. Prior to version 1.17.0, if the Expr expression parser is given an unbounded input string, it will attempt to compile the entire string and generate an Abstract Syntax Tree (AST) node for each part of the expression. In scenarios where input size isn’t limited, a malicious or inadvertent extremely large expression can consume excessive memory as the parser builds a huge AST. This can ultimately lead to*excessive memory usage and an Out-Of-Memory (OOM) crash of the process. This issue is relatively uncommon and will only manifest when there are no restrictions on the input size, i.e. the expression length is allowed to grow arbitrarily large. In typical use cases where inputs are bounded or validated, this problem would not occur. The problem has been patched in the latest versions of the Expr library. The fix introduces compile-time limits on the number of AST nodes and memory usage during parsing, preventing any single expression from exhausting resources. Users should upgrade to Expr version 1.17.0 or later, as this release includes the new node budget and memory limit safeguards. Upgrading to v1.17.0 ensures that extremely deep or large expressions are detected and safely aborted during compilation, avoiding the OOM condition. For users who cannot immediately upgrade, the recommended workaround is to impose an input size restriction before parsing. In practice, this means validating or limiting the length of expression strings that your application will accept. For example, set a maximum allowable number of characters (or nodes) for any expression and reject or truncate inputs that exceed this limit. By ensuring no unbounded-length expression is ever fed into the parser, one can prevent the parser from constructing a pathologically large AST and avoid potential memory exhaustion. In short, pre-validate and cap input size as a safeguard in the absence of the patch. | ||||
| CVE-2024-34155 | 1 Redhat | 15 Ceph Storage, Cost Management, Cryostat and 12 more | 2026-04-15 | 4.3 Medium |
| Calling any of the Parse functions on Go source code which contains deeply nested literals can cause a panic due to stack exhaustion. | ||||
| CVE-2024-35195 | 2 Redhat, Request Project | 10 Ansible Automation Platform, Discovery, Enterprise Linux and 7 more | 2026-04-15 | 5.6 Medium |
| Requests is a HTTP library. Prior to 2.32.0, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. This vulnerability is fixed in 2.32.0. | ||||
| CVE-2024-1975 | 2 Isc, Redhat | 8 Bind, Enterprise Linux, Openshift and 5 more | 2026-04-15 | 7.5 High |
| If a server hosts a zone containing a "KEY" Resource Record, or a resolver DNSSEC-validates a "KEY" Resource Record from a DNSSEC-signed domain in cache, a client can exhaust resolver CPU resources by sending a stream of SIG(0) signed requests. This issue affects BIND 9 versions 9.0.0 through 9.11.37, 9.16.0 through 9.16.50, 9.18.0 through 9.18.27, 9.19.0 through 9.19.24, 9.9.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.49-S1, and 9.18.11-S1 through 9.18.27-S1. | ||||
| CVE-2024-43420 | 1 Redhat | 6 Enterprise Linux, Rhel Aus, Rhel E4s and 3 more | 2026-04-15 | 5.6 Medium |
| Exposure of sensitive information caused by shared microarchitectural predictor state that influences transient execution for some Intel Atom(R) processors may allow an authenticated user to potentially enable information disclosure via local access. | ||||
| CVE-2024-4032 | 2 Python, Redhat | 6 Cpython, Enterprise Linux, Rhel Aus and 3 more | 2026-04-15 | 7.5 High |
| The “ipaddress” module contained incorrect information about whether certain IPv4 and IPv6 addresses were designated as “globally reachable” or “private”. This affected the is_private and is_global properties of the ipaddress.IPv4Address, ipaddress.IPv4Network, ipaddress.IPv6Address, and ipaddress.IPv6Network classes, where values wouldn’t be returned in accordance with the latest information from the IANA Special-Purpose Address Registries. CPython 3.12.4 and 3.13.0a6 contain updated information from these registries and thus have the intended behavior. | ||||
| CVE-2024-6923 | 2 Python, Redhat | 7 Cpython, Enterprise Linux, Rhel Aus and 4 more | 2026-04-15 | 5.5 Medium |
| There is a MEDIUM severity vulnerability affecting CPython. The email module didn’t properly quote newlines for email headers when serializing an email message allowing for header injection when an email is serialized. | ||||
| CVE-2025-25186 | 1 Redhat | 2 Enterprise Linux, Logging | 2026-04-15 | 6.5 Medium |
| Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Starting in version 0.3.2 and prior to versions 0.3.8, 0.4.19, and 0.5.6, there is a possibility for denial of service by memory exhaustion in `net-imap`'s response parser. At any time while the client is connected, a malicious server can send can send highly compressed `uid-set` data which is automatically read by the client's receiver thread. The response parser uses `Range#to_a` to convert the `uid-set` data into arrays of integers, with no limitation on the expanded size of the ranges. Versions 0.3.8, 0.4.19, 0.5.6, and higher fix this issue. Additional details for proper configuration of fixed versions and backward compatibility are available in the GitHub Security Advisory. | ||||
| CVE-2024-24783 | 1 Redhat | 23 Advanced Cluster Security, Ansible Automation Platform, Ceph Storage and 20 more | 2026-04-15 | 5.9 Medium |
| Verifying a certificate chain which contains a certificate with an unknown public key algorithm will cause Certificate.Verify to panic. This affects all crypto/tls clients, and servers that set Config.ClientAuth to VerifyClientCertIfGiven or RequireAndVerifyClientCert. The default behavior is for TLS servers to not verify client certificates. | ||||
| CVE-2025-14946 | 1 Redhat | 2 Container Native Virtualization, Enterprise Linux | 2026-04-15 | 4.8 Medium |
| A flaw was found in libnbd. A malicious actor could exploit this by convincing libnbd to open a specially crafted Uniform Resource Identifier (URI). This vulnerability arises because non-standard hostnames starting with '-o' are incorrectly interpreted as arguments to the Secure Shell (SSH) process, rather than as hostnames. This could lead to arbitrary code execution with the privileges of the user running libnbd. | ||||
| CVE-2024-4603 | 2 Openssl, Redhat | 2 Openssl, Enterprise Linux | 2026-04-15 | 5.3 Medium |
| Issue summary: Checking excessively long DSA keys or parameters may be very slow. Impact summary: Applications that use the functions EVP_PKEY_param_check() or EVP_PKEY_public_check() to check a DSA public key or DSA parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The functions EVP_PKEY_param_check() or EVP_PKEY_public_check() perform various checks on DSA parameters. Some of those computations take a long time if the modulus (`p` parameter) is too large. Trying to use a very large modulus is slow and OpenSSL will not allow using public keys with a modulus which is over 10,000 bits in length for signature verification. However the key and parameter check functions do not limit the modulus size when performing the checks. An application that calls EVP_PKEY_param_check() or EVP_PKEY_public_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. These functions are not called by OpenSSL itself on untrusted DSA keys so only applications that directly call these functions may be vulnerable. Also vulnerable are the OpenSSL pkey and pkeyparam command line applications when using the `-check` option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue. | ||||
| CVE-2024-4741 | 2 Openssl, Redhat | 2 Openssl, Enterprise Linux | 2026-04-15 | 7.5 High |
| Issue summary: Calling the OpenSSL API function SSL_free_buffers may cause memory to be accessed that was previously freed in some situations Impact summary: A use after free can have a range of potential consequences such as the corruption of valid data, crashes or execution of arbitrary code. However, only applications that directly call the SSL_free_buffers function are affected by this issue. Applications that do not call this function are not vulnerable. Our investigations indicate that this function is rarely used by applications. The SSL_free_buffers function is used to free the internal OpenSSL buffer used when processing an incoming record from the network. The call is only expected to succeed if the buffer is not currently in use. However, two scenarios have been identified where the buffer is freed even when still in use. The first scenario occurs where a record header has been received from the network and processed by OpenSSL, but the full record body has not yet arrived. In this case calling SSL_free_buffers will succeed even though a record has only been partially processed and the buffer is still in use. The second scenario occurs where a full record containing application data has been received and processed by OpenSSL but the application has only read part of this data. Again a call to SSL_free_buffers will succeed even though the buffer is still in use. While these scenarios could occur accidentally during normal operation a malicious attacker could attempt to engineer a stituation where this occurs. We are not aware of this issue being actively exploited. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. | ||||