Total
5854 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53332 | 1 Linux | 1 Linux Kernel | 2026-07-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: slimbus: qcom-ngd-ctrl: Register callbacks after creating the ngd When the remoteproc starts in parallel with the NGD driver being probed, or the remoteproc is already up when the PDR lookup is being registered, or in the theoretical event that we get an interrupt from the hardware, these callbacks will operate on uninitialized data. This result in issues to boot the affected boards. One such example can be seen in the following fault, where qcom_slim_ngd_ssr_pdr_notify() schedules work on the NULL ngd_up_work. [ 21.858578] ------------[ cut here ]------------ [ 21.858745] WARNING: kernel/workqueue.c:2338 at __queue_work+0x5e0/0x790, CPU#2: kworker/2:2/116 ... [ 21.859251] Call trace: [ 21.859255] __queue_work+0x5e0/0x790 (P) [ 21.859265] queue_work_on+0x6c/0xf0 [ 21.859273] qcom_slim_ngd_ssr_pdr_notify+0x110/0x150 [slim_qcom_ngd_ctrl] [ 21.859304] qcom_slim_ngd_ssr_notify+0x24/0x40 [slim_qcom_ngd_ctrl] [ 21.859318] notifier_call_chain+0xa4/0x230 [ 21.859329] srcu_notifier_call_chain+0x64/0xb8 [ 21.859338] ssr_notify_start+0x40/0x78 [qcom_common] [ 21.859355] rproc_start+0x130/0x230 [ 21.859367] rproc_boot+0x3d4/0x518 ... Move the enablement of interrupts, and the registration of SSR and PDR until after the NGD device has been registered. This could be further refined by moving initialization to the control driver probe and by removing the platform driver model from the picture. | ||||
| CVE-2026-53163 | 1 Linux | 1 Linux Kernel | 2026-07-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: locking/rtmutex: Skip remove_waiter() when waiter is not enqueued syzbot triggered the following splat in remove_waiter() via FUTEX_CMP_REQUEUE_PI: KASAN: null-ptr-deref in range [0x0000000000000a88-0x0000000000000a8f] class_raw_spinlock_constructor remove_waiter+0x159/0x1200 kernel/locking/rtmutex.c:1561 rt_mutex_start_proxy_lock+0x103/0x120 futex_requeue+0x10e4/0x20d0 __x64_sys_futex+0x34f/0x4d0 task_blocks_on_rt_mutex() does not arm the waiter upon deadlock detection, leaving waiter->task nil, where 3bfdc63936dd ("rtmutex: Use waiter::task instead of current in remove_waiter()") made this fatal. Furthermore, rt_mutex_start_proxy_lock() should not be calling into remove_waiter() upon a successfully grabbing the rtmutex. 1a1fb985f2e2 ("futex: Handle early deadlock return correctly"), moved the remove_waiter() out of __rt_mutex_start_proxy_lock() (where 'ret' was only ever 0 or < 0) into the wrapper. Tighten this check to account for try_to_take_rt_mutex(). | ||||
| CVE-2026-43216 | 1 Linux | 1 Linux Kernel | 2026-07-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: Drop the lock in skb_may_tx_timestamp() skb_may_tx_timestamp() may acquire sock::sk_callback_lock. The lock must not be taken in IRQ context, only softirq is okay. A few drivers receive the timestamp via a dedicated interrupt and complete the TX timestamp from that handler. This will lead to a deadlock if the lock is already write-locked on the same CPU. Taking the lock can be avoided. The socket (pointed by the skb) will remain valid until the skb is released. The ->sk_socket and ->file member will be set to NULL once the user closes the socket which may happen before the timestamp arrives. If we happen to observe the pointer while the socket is closing but before the pointer is set to NULL then we may use it because both pointer (and the file's cred member) are RCU freed. Drop the lock. Use READ_ONCE() to obtain the individual pointer. Add a matching WRITE_ONCE() where the pointer are cleared. | ||||
| CVE-2025-39936 | 1 Linux | 1 Linux Kernel | 2026-07-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Always pass in an error pointer to __sev_platform_shutdown_locked() When 9770b428b1a2 ("crypto: ccp - Move dev_info/err messages for SEV/SNP init and shutdown") moved the error messages dumping so that they don't need to be issued by the callers, it missed the case where __sev_firmware_shutdown() calls __sev_platform_shutdown_locked() with a NULL argument which leads to a NULL ptr deref on the shutdown path, during suspend to disk: #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 983 Comm: hib.sh Not tainted 6.17.0-rc4+ #1 PREEMPT(voluntary) Hardware name: Supermicro Super Server/H12SSL-i, BIOS 2.5 09/08/2022 RIP: 0010:__sev_platform_shutdown_locked.cold+0x0/0x21 [ccp] That rIP is: 00000000000006fd <__sev_platform_shutdown_locked.cold>: 6fd: 8b 13 mov (%rbx),%edx 6ff: 48 8b 7d 00 mov 0x0(%rbp),%rdi 703: 89 c1 mov %eax,%ecx Code: 74 05 31 ff 41 89 3f 49 8b 3e 89 ea 48 c7 c6 a0 8e 54 a0 41 bf 92 ff ff ff e8 e5 2e 09 e1 c6 05 2a d4 38 00 01 e9 26 af ff ff <8b> 13 48 8b 7d 00 89 c1 48 c7 c6 18 90 54 a0 89 44 24 04 e8 c1 2e RSP: 0018:ffffc90005467d00 EFLAGS: 00010282 RAX: 00000000ffffff92 RBX: 0000000000000000 RCX: 0000000000000000 ^^^^^^^^^^^^^^^^ and %rbx is nice and clean. Call Trace: <TASK> __sev_firmware_shutdown.isra.0 sev_dev_destroy psp_dev_destroy sp_destroy pci_device_shutdown device_shutdown kernel_power_off hibernate.cold state_store kernfs_fop_write_iter vfs_write ksys_write do_syscall_64 entry_SYSCALL_64_after_hwframe Pass in a pointer to the function-local error var in the caller. With that addressed, suspending the ccp shows the error properly at least: ccp 0000:47:00.1: sev command 0x2 timed out, disabling PSP ccp 0000:47:00.1: SEV: failed to SHUTDOWN error 0x0, rc -110 SEV-SNP: Leaking PFN range 0x146800-0x146a00 SEV-SNP: PFN 0x146800 unassigned, dumping non-zero entries in 2M PFN region: [0x146800 - 0x146a00] ... ccp 0000:47:00.1: SEV-SNP firmware shutdown failed, rc -16, error 0x0 ACPI: PM: Preparing to enter system sleep state S5 kvm: exiting hardware virtualization reboot: Power down Btw, this driver is crying to be cleaned up to pass in a proper I/O struct which can be used to store information between the different functions, otherwise stuff like that will happen in the future again. | ||||
| CVE-2026-50032 | 1 Mz-automation | 1 Libiec61850 | 2026-07-24 | 7.5 High |
| A NULL pointer dereference in the MMS Write Named Variable List handler, which may allow a network adjacent attacker to crash the server by sending a WriteRequest with an empty listOfData field. | ||||
| CVE-2023-4875 | 3 Debian, Mutt, Redhat | 3 Debian Linux, Mutt, Enterprise Linux | 2026-07-24 | 2.2 Low |
| Null pointer dereference when composing from a specially crafted draft message in Mutt >1.5.2 <2.2.12 | ||||
| CVE-2023-4874 | 3 Debian, Mutt, Redhat | 3 Debian Linux, Mutt, Enterprise Linux | 2026-07-24 | 4.3 Medium |
| Null pointer dereference when viewing a specially crafted email in Mutt >1.5.2 <2.2.12 | ||||
| CVE-2026-47143 | 1 Capstone-engine | 1 Capstone | 2026-07-24 | 5.1 Medium |
| Capstone is a disassembly framework. Versions prior to 6.0.0-Alpha8 and 5.0.8 have a NULL pointer dereference in `modRMRequired()` and `decode()` when disassembling 3DNow! opcodes (`0F 0F`) in builds compiled with `-DCAPSTONE_X86_REDUCE`, allowing a remote attacker to crash any application using the reduced X86 Capstone library by supplying a crafted input containing the 4-byte sequence `0F 0F <modrm> <imm8>`. Versions 6.0.0-Alpha8 and 5.0.8 patch the issue. | ||||
| CVE-2026-15352 | 1 Nasa | 1 Core Flight System | 2026-07-23 | 7.5 High |
| A vulnerability exists in the Health & Safety (HS) application of NASA's Core Flight System (cFS). The flaw allows the application to crash via segmentation fault when processing a routine Housekeeping Telemetry request, leading to denial of service. | ||||
| CVE-2026-13070 | 1 Mongodb | 1 Mongodb Server | 2026-07-23 | 5.3 Medium |
| A MongoDB server initiating an outbound TLS connection may terminate abnormally when processing a malformed OCSP response from a remote peer during the TLS handshake. OCSP stapling validation is enabled by default for outgoing TLS connections. Affected scenarios require the remote peer to hold a certificate issued by the cluster's trusted certificate authority, or for the connection to traverse an untrusted network path. | ||||
| CVE-2026-13065 | 1 Mongodb | 1 Mongodb Server | 2026-07-23 | 6.5 Medium |
| A user with read-only privileges is able to craft an aggregation pipeline using the $linearFill window function operator with a specific sortBy expression type to cause the mongod process to terminate abnormally, resulting in denial of service. The issue stems from insufficient validation of sort specifications during execution. | ||||
| CVE-2026-47059 | 1 Oracle | 3 Graalvm, Graalvm For Jdk, Java Se | 2026-07-23 | 3.7 Low |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: 2D). Supported versions that are affected are Oracle Java SE: 8u491, 8u491-perf, 11.0.31, 17.0.19, 21.0.11, 25.0.3, 26.0.1; Oracle GraalVM for JDK: 17.0.19 and 21.0.11; Oracle GraalVM Enterprise Edition: 21.3.18. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability does not apply to Java deployments, typically in servers, that load and run only trusted code (e.g., code installed by an administrator). CVSS 3.1 Base Score 3.7 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L). | ||||
| CVE-2026-10678 | 1 Zephyrproject | 1 Zephyr | 2026-07-22 | 8.1 High |
| The MCTP-over-I2C+GPIO target binding in Zephyr (subsys/pmci/mctp/mctp_i2c_gpio_target.c) processes pseudo-register writes from an I2C bus master byte-by-byte in mctp_i2c_gpio_target_write_received() without validating the order or the receive buffer. In the affected versions the MCTP_I2C_GPIO_RX_MSG_ADDR (data) handler dereferences and writes through b->rx_pkt without checking that the receive buffer was allocated: a controller that selects the data register and writes a byte without first sending the length register (which is what allocates the buffer) causes a write of an attacker-chosen byte through a NULL/unallocated mctp_pktbuf pointer (i.e. into a small attacker-advanceable offset above address 0), producing memory corruption or a hard fault. The same handler also performs a write-then-check bounds test, allowing a one-byte heap overflow at data[255] when more than 255 data bytes are sent. Because the I2C target callback is invoked with raw bytes supplied by whatever device is the bus master and the binding performs no authentication, a malicious or malfunctioning controller on the bus can trigger these without any prior protocol state, leading to memory corruption and/or denial of service on the target device. The vulnerable code was introduced when the I2C+GPIO target binding was added and shipped in Zephyr v4.3.0 and v4.4.0. The fix defers allocation to the first data byte with a NULL check, treats a missing length as a zero-sized packet rejected by libmctp, and moves the bounds check before the store. | ||||
| CVE-2026-16353 | 1 Mozilla | 1 Firefox | 2026-07-22 | 9.8 Critical |
| Invalid pointer in the DOM: Bindings (WebIDL) component. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13. | ||||
| CVE-2026-63882 | 1 Linux | 1 Linux Kernel | 2026-07-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix NULL pointer bug in svm_range_set_attr The process_info could be NULL if user doesn't call kfd_ioctl_acquire_vm before calling kfd_ioctl_svm. (cherry picked from commit 83a26c812e0529eb040d31a76f73e33e637243d4) | ||||
| CVE-2026-63964 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: ccg: reject firmware images without a ':' record header do_flash() locates the first .cyacd record with p = strnchr(fw->data, fw->size, ':'); while (p < eof) { s = strnchr(p + 1, eof - p - 1, ':'); ... } If the firmware image contains no ':' byte, strnchr() returns NULL. NULL compares less than the valid kernel pointer eof, so the loop body runs and strnchr() is called with p + 1 == (void *)1 and a length of roughly (unsigned long)eof, causing a wonderful crash. The not_signed_fw fallthrough earlier in do_flash() and the chip-state branches in ccg_fw_update_needed() allow an unsigned blob to reach this loop, so a root user who can place a crafted file under /lib/firmware and write the do_flash sysfs attribute can trigger the oops. Bail out with -EINVAL when the initial strnchr() returns NULL. | ||||
| CVE-2026-63986 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: tsinfo: don't pass ERR_PTR to genlmsg_cancel on prepare failure The goto err label leads to: genlmsg_cancel(skb, ehdr); return ret; If ethnl_tsinfo_prepare_dump() failed, it has not started a genlmsg. There's nothing to cancel, and passing an error pointer to genlmsg_cancel() would cause a crash. | ||||
| CVE-2026-63877 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: dz: Convert to use a platform device Prevent a crash from happening as the first serial port is initialised: Console: switching to colour frame buffer device 160x64 tgafb: SFB+ detected, rev=0x02 fb0: Digital ZLX-E1 frame buffer device at 0x1e000000 DECstation DZ serial driver version 1.04 CPU 0 Unable to handle kernel paging request at virtual address 000000bc, epc == 8048b3a4, ra == 80470a78 Oops[#1]: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.19.0-dirty #35 NONE $ 0 : 00000000 1000ac00 00000004 804707ac $ 4 : 00000000 80e20850 80e20858 81000030 $ 8 : 00000000 8072c81c 00000008 fefefeff $12 : 6c616972 00000006 80c5917f 69726420 $16 : 80e20800 00000000 808f8968 80e20800 $20 : 00000000 807f5a90 808b0094 808d3bc8 $24 : 00000018 80479030 $28 : 80c2e000 80c2fd70 00000069 80470a78 Hi : 00000004 Lo : 00000000 epc : 8048b3a4 __dev_fwnode+0x0/0xc ra : 80470a78 serial_base_ctrl_add+0xa0/0x168 Status: 1000ac04 IEp Cause : 30000008 (ExcCode 02) BadVA : 000000bc PrId : 00000220 (R3000) Modules linked in: Process swapper/0 (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) Stack : 00400044 00400040 8046f4cc 00000000 808a6148 808a0000 808f8968 8086983c 808e0000 8046fc84 1000ac01 00000028 80e20700 802ba3f8 80e20700 80d34a94 80c1b900 80e20700 80e20700 80e20700 80e20700 80444650 00000000 00000000 00000000 807f5a90 808b0094 80447080 00400040 808e0000 80d34a94 808a6148 80d34a94 00000004 80e20700 00000000 8076974c 80469810 80c2fe3c 1000ac01 ... Call Trace: [<8048b3a4>] __dev_fwnode+0x0/0xc [<80470a78>] serial_base_ctrl_add+0xa0/0x168 [<8046fc84>] serial_core_register_port+0x1c8/0x974 [<808c6af0>] dz_init+0x74/0xc8 [<800470e0>] do_one_initcall+0x44/0x2d4 [<808b111c>] kernel_init_freeable+0x258/0x308 [<8072e434>] kernel_init+0x20/0x114 [<80049cd0>] ret_from_kernel_thread+0x14/0x1c Code: 27bd0018 03e00008 2402ffea <8c8200bc> 03e00008 00000000 27bdffc0 afbe0038 afb30024 ---[ end trace 0000000000000000 ]--- -- where a pointer is dereferenced that has been derived from a null pointer to the port's parent device. Since no device is available with legacy probing and it's not anymore a preferable way to discover devices anyway, switch the driver to using a platform device and use it as the port's parent device. Update resource handling accordingly and only request the actual span of addresses used within the slot, which will have had its resource already requested by generic platform device code. Use platform_driver_probe() not just because the DZ device is fixed with solder on board and not straightforward to remove, but foremost because the associated TTY's major device number is the same as used by the zs driver and the first driver to claim it will prevent the other one from using it. Either one DZ device or some SCC devices will be present in a given system but never both at a time, and therefore we want the major device number to be claimed by the first driver to actually successfully bind to its device and platform_driver_probe() is a way to fulfil that. An unfortunate consequence of the switch to a platform device is we now hand the console over from the bootconsole much later in the bootstrap. The firmware console handler appears good enough though to work so late and in particular with interrupts enabled. Conversely only starting the console port so late lets the reset code fully utilise our delay handlers, so switch from udelay() to fsleep() for transmitter draining so as to avoid busy-waiting for an excessive amount of time. | ||||
| CVE-2026-63876 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: zs: Convert to use a platform device Prevent a crash from happening as the first serial port is initialised: Console: switching to mono frame buffer device 160x64 fb0: PMAG-AA frame buffer device at tc0 DECstation Z85C30 serial driver version 0.10 CPU 0 Unable to handle kernel paging request at virtual address 0000002c, epc == 803ab00c, ra == 803aafe0 Oops[#1]: CPU: 0 PID: 1 Comm: swapper Not tainted 6.4.0-rc3-00031-g84a9582fd203-dirty #57 $ 0 : 00000000 10012c00 803aaeb0 00000000 $ 4 : 80e12f60 80e12f50 80e12f58 81000030 $ 8 : 00000000 805ff37c 00000000 33433538 $12 : 65732030 00000006 80c2915d 6c616972 $16 : 80e12f00 807b7630 00000000 00000000 $20 : 00000004 00000348 000001a0 807623b8 $24 : 00000018 00000000 $28 : 80c24000 80c25d60 8078b148 803aafe0 Hi : 00000000 Lo : 00000000 epc : 803ab00c serial_base_ctrl_add+0x78/0xf4 ra : 803aafe0 serial_base_ctrl_add+0x4c/0xf4 Status: 10012c03 KERNEL EXL IE Cause : 00000008 (ExcCode 02) BadVA : 0000002c PrId : 00000440 (R4400SC) Modules linked in: Process swapper (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) Stack : 80760000 00000cc0 00400044 00400040 803aa02c 80d61ab8 00000000 807b7630 80760000 807623b8 807b7628 803aa644 80386998 00000000 80e17780 80220f68 80e17780 80d61ab8 80c17d80 80e17780 80e17780 8063c798 80e17780 80383fa0 00000010 80e17780 00000000 80386998 807a0000 00000000 00400040 8038f848 807623b8 80d61ab8 00000004 80e17780 00000000 803a68e4 80c25e2c 803bb884 ... Call Trace: [<803ab00c>] serial_base_ctrl_add+0x78/0xf4 [<803aa644>] serial_core_register_port+0x174/0x69c [<8077e9ac>] zs_init+0xc8/0xfc [<800404d4>] do_one_initcall+0x40/0x2ac [<8076cecc>] kernel_init_freeable+0x1e4/0x270 [<80605bec>] kernel_init+0x20/0x108 [<800431e8>] ret_from_kernel_thread+0x14/0x1c Code: 2442aeb0 ae120024 ae0200d0 <8c67002c> 50e00001 8c670000 3c06806e 3c05806e afb30010 ---[ end trace 0000000000000000 ]--- (report at the offending commit) -- where a pointer is dereferenced that has been derived from a null pointer to the port's parent device. Since no device is available with legacy probing and it's not anymore a preferable way to discover devices anyway, switch the driver to using a platform device and use it as the port's parent device. Update resource handling accordingly and only request the actual span of addresses used within the slot, which will have had its resource already requested by generic platform device code. Use platform_driver_probe() not just because SCC devices are fixed with solder on board and not straightforward to remove, but foremost because the associated TTY's major device number is the same as used by the dz driver and the first driver to claim it will prevent the other one from using it. Either one DZ device or some SCC devices will be present in a given system but never both at a time, and therefore we want the major device number to be claimed by the first driver to actually successfully bind to its device and platform_driver_probe() is a way to fulfil that. An unfortunate consequence of the switch to a platform device is we now hand the console over from the bootconsole much later in the bootstrap. The firmware console handler appears good enough though to work so late and in particular with interrupts enabled. Since there is one way only remaining to reach zs_reset() now, remove the port initialisation marker as no longer needed and go through the channel reset unconditionally. | ||||
| CVE-2026-63991 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: 6lowpan: check skb_clone() return value in send_mcast_pkt() The skb_clone() function can return NULL if memory allocation fails. send_mcast_pkt() calls skb_clone() without checking the return value, which can lead to a NULL pointer dereference in send_pkt() when it dereferences skb->data. Add a NULL check after skb_clone() and skip the peer if the clone fails. | ||||