Total
837 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-51006 | 2 Appneta, Broadcom | 2 Tcpreplay, Tcpreplay | 2025-10-14 | 7.8 High |
| Within tcpreplay's tcprewrite, a double free vulnerability has been identified in the dlt_linuxsll2_cleanup() function in plugins/dlt_linuxsll2/linuxsll2.c. This vulnerability is triggered when tcpedit_dlt_cleanup() indirectly invokes the cleanup routine multiple times on the same memory region. By supplying a specifically crafted pcap file to the tcprewrite binary, a local attacker can exploit this flaw to cause a Denial of Service (DoS) via memory corruption. | ||||
| CVE-2025-5100 | 1 Dynamixsoftware | 1 Printershare | 2025-10-08 | 8 High |
| A double-free condition occurs during the cleanup of temporary image files, which can be exploited to achieve memory corruption and potentially arbitrary code execution. | ||||
| CVE-2023-52888 | 1 Linux | 1 Linux Kernel | 2025-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Only free buffer VA that is not NULL In the MediaTek vcodec driver, while mtk_vcodec_mem_free() is mostly called only when the buffer to free exists, there are some instances that didn't do the check and triggered warnings in practice. We believe those checks were forgotten unintentionally. Add the checks back to fix the warnings. | ||||
| CVE-2024-10934 | 1 Openbsd | 1 Openbsd | 2025-10-02 | 9.8 Critical |
| In OpenBSD 7.5 before errata 008 and OpenBSD 7.4 before errata 021, avoid possible mbuf double free in NFS client and server implementation, do not use uninitialized variable in error handling of NFS server. | ||||
| CVE-2024-53133 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Handle dml allocation failure to avoid crash [Why] In the case where a dml allocation fails for any reason, the current state's dml contexts would no longer be valid. Then subsequent calls dc_state_copy_internal would shallow copy invalid memory and if the new state was released, a double free would occur. [How] Reset dml pointers in new_state to NULL and avoid invalid pointer (cherry picked from commit bcafdc61529a48f6f06355d78eb41b3aeda5296c) | ||||
| CVE-2024-50071 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: nuvoton: fix a double free in ma35_pinctrl_dt_node_to_map_func() 'new_map' is allocated using devm_* which takes care of freeing the allocated data on device removal, call to .dt_free_map = pinconf_generic_dt_free_map double frees the map as pinconf_generic_dt_free_map() calls pinctrl_utils_free_map(). Fix this by using kcalloc() instead of auto-managed devm_kcalloc(). | ||||
| CVE-2024-56775 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix handling of plane refcount [Why] The mechanism to backup and restore plane states doesn't maintain refcount, which can cause issues if the refcount of the plane changes in between backup and restore operations, such as memory leaks if the refcount was supposed to go down, or double frees / invalid memory accesses if the refcount was supposed to go up. [How] Cache and re-apply current refcount when restoring plane states. | ||||
| CVE-2024-53191 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix warning when unbinding If there is an error during some initialization related to firmware, the buffers dp->tx_ring[i].tx_status are released. However this is released again when the device is unbinded (ath12k_pci), and we get: WARNING: CPU: 0 PID: 2098 at mm/slub.c:4689 free_large_kmalloc+0x4d/0x80 Call Trace: free_large_kmalloc ath12k_dp_free ath12k_core_deinit ath12k_pci_remove ... The issue is always reproducible from a VM because the MSI addressing initialization is failing. In order to fix the issue, just set the buffers to NULL after releasing in order to avoid the double free. | ||||
| CVE-2023-52930 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix potential bit_17 double-free A userspace with multiple threads racing I915_GEM_SET_TILING to set the tiling to I915_TILING_NONE could trigger a double free of the bit_17 bitmask. (Or conversely leak memory on the transition to tiled.) Move allocation/free'ing of the bitmask within the section protected by the obj lock. [tursulin: Correct fixes tag and added cc stable.] (cherry picked from commit 10e0cbaaf1104f449d695c80bcacf930dcd3c42e) | ||||
| CVE-2022-49508 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: elan: Fix potential double free in elan_input_configured 'input' is a managed resource allocated with devm_input_allocate_device(), so there is no need to call input_free_device() explicitly or there will be a double free. According to the doc of devm_input_allocate_device(): * Managed input devices do not need to be explicitly unregistered or * freed as it will be done automatically when owner device unbinds from * its driver (or binding fails). | ||||
| CVE-2022-49455 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: misc: ocxl: fix possible double free in ocxl_file_register_afu info_release() will be called in device_unregister() when info->dev's reference count is 0. So there is no need to call ocxl_afu_put() and kfree() again. Fix this by adding free_minor() and return to err_unregister error path. | ||||
| CVE-2022-49391 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: mtk_scp: Fix a potential double free 'scp->rproc' is allocated using devm_rproc_alloc(), so there is no need to free it explicitly in the remove function. | ||||
| CVE-2022-49290 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mac80211: fix potential double free on mesh join While commit 6a01afcf8468 ("mac80211: mesh: Free ie data when leaving mesh") fixed a memory leak on mesh leave / teardown it introduced a potential memory corruption caused by a double free when rejoining the mesh: ieee80211_leave_mesh() -> kfree(sdata->u.mesh.ie); ... ieee80211_join_mesh() -> copy_mesh_setup() -> old_ie = ifmsh->ie; -> kfree(old_ie); This double free / kernel panics can be reproduced by using wpa_supplicant with an encrypted mesh (if set up without encryption via "iw" then ifmsh->ie is always NULL, which avoids this issue). And then calling: $ iw dev mesh0 mesh leave $ iw dev mesh0 mesh join my-mesh Note that typically these commands are not used / working when using wpa_supplicant. And it seems that wpa_supplicant or wpa_cli are going through a NETDEV_DOWN/NETDEV_UP cycle between a mesh leave and mesh join where the NETDEV_UP resets the mesh.ie to NULL via a memcpy of default_mesh_setup in cfg80211_netdev_notifier_call, which then avoids the memory corruption, too. The issue was first observed in an application which was not using wpa_supplicant but "Senf" instead, which implements its own calls to nl80211. Fixing the issue by removing the kfree()'ing of the mesh IE in the mesh join function and leaving it solely up to the mesh leave to free the mesh IE. | ||||
| CVE-2024-56699 | 1 Linux | 1 Linux Kernel | 2025-09-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix potential double remove of hotplug slot In commit 6ee600bfbe0f ("s390/pci: remove hotplug slot when releasing the device") the zpci_exit_slot() was moved from zpci_device_reserved() to zpci_release_device() with the intention of keeping the hotplug slot around until the device is actually removed. Now zpci_release_device() is only called once all references are dropped. Since the zPCI subsystem only drops its reference once the device is in the reserved state it follows that zpci_release_device() must only deal with devices in the reserved state. Despite that it contains code to tear down from both configured and standby state. For the standby case this already includes the removal of the hotplug slot so would cause a double removal if a device was ever removed in either configured or standby state. Instead of causing a potential double removal in a case that should never happen explicitly WARN_ON() if a device in non-reserved state is released and get rid of the dead code cases. | ||||
| CVE-2022-48821 | 1 Linux | 1 Linux Kernel | 2025-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: avoid double fput() on failed usercopy If the copy back to userland fails for the FASTRPC_IOCTL_ALLOC_DMA_BUFF ioctl(), we shouldn't assume that 'buf->dmabuf' is still valid. In fact, dma_buf_fd() called fd_install() before, i.e. "consumed" one reference, leaving us with none. Calling dma_buf_put() will therefore put a reference we no longer own, leading to a valid file descritor table entry for an already released 'file' object which is a straight use-after-free. Simply avoid calling dma_buf_put() and rely on the process exit code to do the necessary cleanup, if needed, i.e. if the file descriptor is still valid. | ||||
| CVE-2024-53698 | 1 Qnap | 2 Qts, Quts Hero | 2025-09-23 | 4.9 Medium |
| A double free vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow remote attackers who have gained administrator access to modify memory. We have already fixed the vulnerability in the following versions: QTS 5.2.3.3006 build 20250108 and later QuTS hero h5.2.3.3006 build 20250108 and later | ||||
| CVE-2022-49205 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix double uncharge the mem of sk_msg If tcp_bpf_sendmsg is running during a tear down operation, psock may be freed. tcp_bpf_sendmsg() tcp_bpf_send_verdict() sk_msg_return() tcp_bpf_sendmsg_redir() unlikely(!psock)) sk_msg_free() The mem of msg has been uncharged in tcp_bpf_send_verdict() by sk_msg_return(), and would be uncharged by sk_msg_free() again. When psock is null, we can simply returning an error code, this would then trigger the sk_msg_free_nocharge in the error path of __SK_REDIRECT and would have the side effect of throwing an error up to user space. This would be a slight change in behavior from user side but would look the same as an error if the redirect on the socket threw an error. This issue can cause the following info: WARNING: CPU: 0 PID: 2136 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260 Call Trace: <TASK> __sk_destruct+0x24/0x1f0 sk_psock_destroy+0x19b/0x1c0 process_one_work+0x1b3/0x3c0 worker_thread+0x30/0x350 ? process_one_work+0x3c0/0x3c0 kthread+0xe6/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> | ||||
| CVE-2023-52688 | 1 Linux | 1 Linux Kernel | 2025-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix the error handler of rfkill config When the core rfkill config throws error, it should free the allocated resources. Currently it is not freeing the core pdev create resources. Avoid this issue by calling the core pdev destroy in the error handler of core rfkill config. Found this issue in the code review and it is compile tested only. | ||||
| CVE-2025-5262 | 1 Mozilla | 1 Thunderbird | 2025-09-19 | 7.5 High |
| A double-free could have occurred in `vpx_codec_enc_init_multi` after a failed allocation when initializing the encoder for WebRTC. This could have caused memory corruption and a potentially exploitable crash. This vulnerability affects Thunderbird < 139 and Thunderbird < 128.11. | ||||
| CVE-2025-8585 | 1 Libav | 1 Libav | 2025-09-04 | 5.3 Medium |
| A vulnerability, which was classified as critical, has been found in libav up to 12.3. Affected by this issue is the function main of the file /avtools/avconv.c of the component DSS File Demuxer. The manipulation leads to double free. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used. The bug was initially reported by the researcher to the wrong project. This vulnerability only affects products that are no longer supported by the maintainer. | ||||