Filtered by vendor Redhat
Subscriptions
Filtered by product Enterprise Linux
Subscriptions
Total
15509 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-26975 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powercap: intel_rapl: Fix a NULL pointer dereference A NULL pointer dereference is triggered when probing the MMIO RAPL driver on platforms with CPU ID not listed in intel_rapl_common CPU model list. This is because the intel_rapl_common module still probes on such platforms even if 'defaults_msr' is not set after commit 1488ac990ac8 ("powercap: intel_rapl: Allow probing without CPUID match"). Thus the MMIO RAPL rp->priv->defaults is NULL when registering to RAPL framework. Fix the problem by adding sanity check to ensure rp->priv->rapl_defaults is always valid. | ||||
| CVE-2024-26974 | 3 Debian, Linux, Redhat | 4 Debian Linux, Linux Kernel, Enterprise Linux and 1 more | 2025-05-04 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat - resolve race condition during AER recovery During the PCI AER system's error recovery process, the kernel driver may encounter a race condition with freeing the reset_data structure's memory. If the device restart will take more than 10 seconds the function scheduling that restart will exit due to a timeout, and the reset_data structure will be freed. However, this data structure is used for completion notification after the restart is completed, which leads to a UAF bug. This results in a KFENCE bug notice. BUG: KFENCE: use-after-free read in adf_device_reset_worker+0x38/0xa0 [intel_qat] Use-after-free read at 0x00000000bc56fddf (in kfence-#142): adf_device_reset_worker+0x38/0xa0 [intel_qat] process_one_work+0x173/0x340 To resolve this race condition, the memory associated to the container of the work_struct is freed on the worker if the timeout expired, otherwise on the function that schedules the worker. The timeout detection can be done by checking if the caller is still waiting for completion or not by using completion_done() function. | ||||
| CVE-2024-26973 | 1 Redhat | 2 Enterprise Linux, Rhel Eus | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fat: fix uninitialized field in nostale filehandles When fat_encode_fh_nostale() encodes file handle without a parent it stores only first 10 bytes of the file handle. However the length of the file handle must be a multiple of 4 so the file handle is actually 12 bytes long and the last two bytes remain uninitialized. This is not great at we potentially leak uninitialized information with the handle to userspace. Properly initialize the full handle length. | ||||
| CVE-2024-26964 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Add error handling in xhci_map_urb_for_dma Currently xhci_map_urb_for_dma() creates a temporary buffer and copies the SG list to the new linear buffer. But if the kzalloc_node() fails, then the following sg_pcopy_to_buffer() can lead to crash since it tries to memcpy to NULL pointer. So return -ENOMEM if kzalloc returns null pointer. | ||||
| CVE-2024-26962 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-raid456, md/raid456: fix a deadlock for dm-raid456 while io concurrent with reshape For raid456, if reshape is still in progress, then IO across reshape position will wait for reshape to make progress. However, for dm-raid, in following cases reshape will never make progress hence IO will hang: 1) the array is read-only; 2) MD_RECOVERY_WAIT is set; 3) MD_RECOVERY_FROZEN is set; After commit c467e97f079f ("md/raid6: use valid sector values to determine if an I/O should wait on the reshape") fix the problem that IO across reshape position doesn't wait for reshape, the dm-raid test shell/lvconvert-raid-reshape.sh start to hang: [root@fedora ~]# cat /proc/979/stack [<0>] wait_woken+0x7d/0x90 [<0>] raid5_make_request+0x929/0x1d70 [raid456] [<0>] md_handle_request+0xc2/0x3b0 [md_mod] [<0>] raid_map+0x2c/0x50 [dm_raid] [<0>] __map_bio+0x251/0x380 [dm_mod] [<0>] dm_submit_bio+0x1f0/0x760 [dm_mod] [<0>] __submit_bio+0xc2/0x1c0 [<0>] submit_bio_noacct_nocheck+0x17f/0x450 [<0>] submit_bio_noacct+0x2bc/0x780 [<0>] submit_bio+0x70/0xc0 [<0>] mpage_readahead+0x169/0x1f0 [<0>] blkdev_readahead+0x18/0x30 [<0>] read_pages+0x7c/0x3b0 [<0>] page_cache_ra_unbounded+0x1ab/0x280 [<0>] force_page_cache_ra+0x9e/0x130 [<0>] page_cache_sync_ra+0x3b/0x110 [<0>] filemap_get_pages+0x143/0xa30 [<0>] filemap_read+0xdc/0x4b0 [<0>] blkdev_read_iter+0x75/0x200 [<0>] vfs_read+0x272/0x460 [<0>] ksys_read+0x7a/0x170 [<0>] __x64_sys_read+0x1c/0x30 [<0>] do_syscall_64+0xc6/0x230 [<0>] entry_SYSCALL_64_after_hwframe+0x6c/0x74 This is because reshape can't make progress. For md/raid, the problem doesn't exist because register new sync_thread doesn't rely on the IO to be done any more: 1) If array is read-only, it can switch to read-write by ioctl/sysfs; 2) md/raid never set MD_RECOVERY_WAIT; 3) If MD_RECOVERY_FROZEN is set, mddev_suspend() doesn't hold 'reconfig_mutex', hence it can be cleared and reshape can continue by sysfs api 'sync_action'. However, I'm not sure yet how to avoid the problem in dm-raid yet. This patch on the one hand make sure raid_message() can't change sync_thread() through raid_message() after presuspend(), on the other hand detect the above 3 cases before wait for IO do be done in dm_suspend(), and let dm-raid requeue those IO. | ||||
| CVE-2024-26961 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mac802154: fix llsec key resources release in mac802154_llsec_key_del mac802154_llsec_key_del() can free resources of a key directly without following the RCU rules for waiting before the end of a grace period. This may lead to use-after-free in case llsec_lookup_key() is traversing the list of keys in parallel with a key deletion: refcount_t: addition on 0; use-after-free. WARNING: CPU: 4 PID: 16000 at lib/refcount.c:25 refcount_warn_saturate+0x162/0x2a0 Modules linked in: CPU: 4 PID: 16000 Comm: wpan-ping Not tainted 6.7.0 #19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:refcount_warn_saturate+0x162/0x2a0 Call Trace: <TASK> llsec_lookup_key.isra.0+0x890/0x9e0 mac802154_llsec_encrypt+0x30c/0x9c0 ieee802154_subif_start_xmit+0x24/0x1e0 dev_hard_start_xmit+0x13e/0x690 sch_direct_xmit+0x2ae/0xbc0 __dev_queue_xmit+0x11dd/0x3c20 dgram_sendmsg+0x90b/0xd60 __sys_sendto+0x466/0x4c0 __x64_sys_sendto+0xe0/0x1c0 do_syscall_64+0x45/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Also, ieee802154_llsec_key_entry structures are not freed by mac802154_llsec_key_del(): unreferenced object 0xffff8880613b6980 (size 64): comm "iwpan", pid 2176, jiffies 4294761134 (age 60.475s) hex dump (first 32 bytes): 78 0d 8f 18 80 88 ff ff 22 01 00 00 00 00 ad de x......."....... 00 00 00 00 00 00 00 00 03 00 cd ab 00 00 00 00 ................ backtrace: [<ffffffff81dcfa62>] __kmem_cache_alloc_node+0x1e2/0x2d0 [<ffffffff81c43865>] kmalloc_trace+0x25/0xc0 [<ffffffff88968b09>] mac802154_llsec_key_add+0xac9/0xcf0 [<ffffffff8896e41a>] ieee802154_add_llsec_key+0x5a/0x80 [<ffffffff8892adc6>] nl802154_add_llsec_key+0x426/0x5b0 [<ffffffff86ff293e>] genl_family_rcv_msg_doit+0x1fe/0x2f0 [<ffffffff86ff46d1>] genl_rcv_msg+0x531/0x7d0 [<ffffffff86fee7a9>] netlink_rcv_skb+0x169/0x440 [<ffffffff86ff1d88>] genl_rcv+0x28/0x40 [<ffffffff86fec15c>] netlink_unicast+0x53c/0x820 [<ffffffff86fecd8b>] netlink_sendmsg+0x93b/0xe60 [<ffffffff86b91b35>] ____sys_sendmsg+0xac5/0xca0 [<ffffffff86b9c3dd>] ___sys_sendmsg+0x11d/0x1c0 [<ffffffff86b9c65a>] __sys_sendmsg+0xfa/0x1d0 [<ffffffff88eadbf5>] do_syscall_64+0x45/0xf0 [<ffffffff890000ea>] entry_SYSCALL_64_after_hwframe+0x6e/0x76 Handle the proper resource release in the RCU callback function mac802154_llsec_key_del_rcu(). Note that if llsec_lookup_key() finds a key, it gets a refcount via llsec_key_get() and locally copies key id from key_entry (which is a list element). So it's safe to call llsec_key_put() and free the list entry after the RCU grace period elapses. Found by Linux Verification Center (linuxtesting.org). | ||||
| CVE-2024-26960 | 3 Debian, Linux, Redhat | 4 Debian Linux, Linux Kernel, Enterprise Linux and 1 more | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: swap: fix race between free_swap_and_cache() and swapoff() There was previously a theoretical window where swapoff() could run and teardown a swap_info_struct while a call to free_swap_and_cache() was running in another thread. This could cause, amongst other bad possibilities, swap_page_trans_huge_swapped() (called by free_swap_and_cache()) to access the freed memory for swap_map. This is a theoretical problem and I haven't been able to provoke it from a test case. But there has been agreement based on code review that this is possible (see link below). Fix it by using get_swap_device()/put_swap_device(), which will stall swapoff(). There was an extra check in _swap_info_get() to confirm that the swap entry was not free. This isn't present in get_swap_device() because it doesn't make sense in general due to the race between getting the reference and swapoff. So I've added an equivalent check directly in free_swap_and_cache(). Details of how to provoke one possible issue (thanks to David Hildenbrand for deriving this): --8<----- __swap_entry_free() might be the last user and result in "count == SWAP_HAS_CACHE". swapoff->try_to_unuse() will stop as soon as soon as si->inuse_pages==0. So the question is: could someone reclaim the folio and turn si->inuse_pages==0, before we completed swap_page_trans_huge_swapped(). Imagine the following: 2 MiB folio in the swapcache. Only 2 subpages are still references by swap entries. Process 1 still references subpage 0 via swap entry. Process 2 still references subpage 1 via swap entry. Process 1 quits. Calls free_swap_and_cache(). -> count == SWAP_HAS_CACHE [then, preempted in the hypervisor etc.] Process 2 quits. Calls free_swap_and_cache(). -> count == SWAP_HAS_CACHE Process 2 goes ahead, passes swap_page_trans_huge_swapped(), and calls __try_to_reclaim_swap(). __try_to_reclaim_swap()->folio_free_swap()->delete_from_swap_cache()-> put_swap_folio()->free_swap_slot()->swapcache_free_entries()-> swap_entry_free()->swap_range_free()-> ... WRITE_ONCE(si->inuse_pages, si->inuse_pages - nr_entries); What stops swapoff to succeed after process 2 reclaimed the swap cache but before process1 finished its call to swap_page_trans_huge_swapped()? --8<----- | ||||
| CVE-2024-26951 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wireguard: netlink: check for dangling peer via is_dead instead of empty list If all peers are removed via wg_peer_remove_all(), rather than setting peer_list to empty, the peer is added to a temporary list with a head on the stack of wg_peer_remove_all(). If a netlink dump is resumed and the cursored peer is one that has been removed via wg_peer_remove_all(), it will iterate from that peer and then attempt to dump freed peers. Fix this by instead checking peer->is_dead, which was explictly created for this purpose. Also move up the device_update_lock lockdep assertion, since reading is_dead relies on that. It can be reproduced by a small script like: echo "Setting config..." ip link add dev wg0 type wireguard wg setconf wg0 /big-config ( while true; do echo "Showing config..." wg showconf wg0 > /dev/null done ) & sleep 4 wg setconf wg0 <(printf "[Peer]\nPublicKey=$(wg genkey)\n") Resulting in: BUG: KASAN: slab-use-after-free in __lock_acquire+0x182a/0x1b20 Read of size 8 at addr ffff88811956ec70 by task wg/59 CPU: 2 PID: 59 Comm: wg Not tainted 6.8.0-rc2-debug+ #5 Call Trace: <TASK> dump_stack_lvl+0x47/0x70 print_address_description.constprop.0+0x2c/0x380 print_report+0xab/0x250 kasan_report+0xba/0xf0 __lock_acquire+0x182a/0x1b20 lock_acquire+0x191/0x4b0 down_read+0x80/0x440 get_peer+0x140/0xcb0 wg_get_device_dump+0x471/0x1130 | ||||
| CVE-2024-26950 | 3 Debian, Linux, Redhat | 3 Debian Linux, Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wireguard: netlink: access device through ctx instead of peer The previous commit fixed a bug that led to a NULL peer->device being dereferenced. It's actually easier and faster performance-wise to instead get the device from ctx->wg. This semantically makes more sense too, since ctx->wg->peer_allowedips.seq is compared with ctx->allowedips_seq, basing them both in ctx. This also acts as a defence in depth provision against freed peers. | ||||
| CVE-2024-26940 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Create debugfs ttm_resource_manager entry only if needed The driver creates /sys/kernel/debug/dri/0/mob_ttm even when the corresponding ttm_resource_manager is not allocated. This leads to a crash when trying to read from this file. Add a check to create mob_ttm, system_mob_ttm, and gmr_ttm debug file only when the corresponding ttm_resource_manager is allocated. crash> bt PID: 3133409 TASK: ffff8fe4834a5000 CPU: 3 COMMAND: "grep" #0 [ffffb954506b3b20] machine_kexec at ffffffffb2a6bec3 #1 [ffffb954506b3b78] __crash_kexec at ffffffffb2bb598a #2 [ffffb954506b3c38] crash_kexec at ffffffffb2bb68c1 #3 [ffffb954506b3c50] oops_end at ffffffffb2a2a9b1 #4 [ffffb954506b3c70] no_context at ffffffffb2a7e913 #5 [ffffb954506b3cc8] __bad_area_nosemaphore at ffffffffb2a7ec8c #6 [ffffb954506b3d10] do_page_fault at ffffffffb2a7f887 #7 [ffffb954506b3d40] page_fault at ffffffffb360116e [exception RIP: ttm_resource_manager_debug+0x11] RIP: ffffffffc04afd11 RSP: ffffb954506b3df0 RFLAGS: 00010246 RAX: ffff8fe41a6d1200 RBX: 0000000000000000 RCX: 0000000000000940 RDX: 0000000000000000 RSI: ffffffffc04b4338 RDI: 0000000000000000 RBP: ffffb954506b3e08 R8: ffff8fee3ffad000 R9: 0000000000000000 R10: ffff8fe41a76a000 R11: 0000000000000001 R12: 00000000ffffffff R13: 0000000000000001 R14: ffff8fe5bb6f3900 R15: ffff8fe41a6d1200 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffffb954506b3e00] ttm_resource_manager_show at ffffffffc04afde7 [ttm] #9 [ffffb954506b3e30] seq_read at ffffffffb2d8f9f3 RIP: 00007f4c4eda8985 RSP: 00007ffdbba9e9f8 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 000000000037e000 RCX: 00007f4c4eda8985 RDX: 000000000037e000 RSI: 00007f4c41573000 RDI: 0000000000000003 RBP: 000000000037e000 R8: 0000000000000000 R9: 000000000037fe30 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4c41573000 R13: 0000000000000003 R14: 00007f4c41572010 R15: 0000000000000003 ORIG_RAX: 0000000000000000 CS: 0033 SS: 002b | ||||
| CVE-2024-26939 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/vma: Fix UAF on destroy against retire race Object debugging tools were sporadically reporting illegal attempts to free a still active i915 VMA object when parking a GT believed to be idle. [161.359441] ODEBUG: free active (active state 0) object: ffff88811643b958 object type: i915_active hint: __i915_vma_active+0x0/0x50 [i915] [161.360082] WARNING: CPU: 5 PID: 276 at lib/debugobjects.c:514 debug_print_object+0x80/0xb0 ... [161.360304] CPU: 5 PID: 276 Comm: kworker/5:2 Not tainted 6.5.0-rc1-CI_DRM_13375-g003f860e5577+ #1 [161.360314] Hardware name: Intel Corporation Rocket Lake Client Platform/RocketLake S UDIMM 6L RVP, BIOS RKLSFWI1.R00.3173.A03.2204210138 04/21/2022 [161.360322] Workqueue: i915-unordered __intel_wakeref_put_work [i915] [161.360592] RIP: 0010:debug_print_object+0x80/0xb0 ... [161.361347] debug_object_free+0xeb/0x110 [161.361362] i915_active_fini+0x14/0x130 [i915] [161.361866] release_references+0xfe/0x1f0 [i915] [161.362543] i915_vma_parked+0x1db/0x380 [i915] [161.363129] __gt_park+0x121/0x230 [i915] [161.363515] ____intel_wakeref_put_last+0x1f/0x70 [i915] That has been tracked down to be happening when another thread is deactivating the VMA inside __active_retire() helper, after the VMA's active counter has been already decremented to 0, but before deactivation of the VMA's object is reported to the object debugging tool. We could prevent from that race by serializing i915_active_fini() with __active_retire() via ref->tree_lock, but that wouldn't stop the VMA from being used, e.g. from __i915_vma_retire() called at the end of __active_retire(), after that VMA has been already freed by a concurrent i915_vma_destroy() on return from the i915_active_fini(). Then, we should rather fix the issue at the VMA level, not in i915_active. Since __i915_vma_parked() is called from __gt_park() on last put of the GT's wakeref, the issue could be addressed by holding the GT wakeref long enough for __active_retire() to complete before that wakeref is released and the GT parked. I believe the issue was introduced by commit d93939730347 ("drm/i915: Remove the vma refcount") which moved a call to i915_active_fini() from a dropped i915_vma_release(), called on last put of the removed VMA kref, to i915_vma_parked() processing path called on last put of a GT wakeref. However, its visibility to the object debugging tool was suppressed by a bug in i915_active that was fixed two weeks later with commit e92eb246feb9 ("drm/i915/active: Fix missing debug object activation"). A VMA associated with a request doesn't acquire a GT wakeref by itself. Instead, it depends on a wakeref held directly by the request's active intel_context for a GT associated with its VM, and indirectly on that intel_context's engine wakeref if the engine belongs to the same GT as the VMA's VM. Those wakerefs are released asynchronously to VMA deactivation. Fix the issue by getting a wakeref for the VMA's GT when activating it, and putting that wakeref only after the VMA is deactivated. However, exclude global GTT from that processing path, otherwise the GPU never goes idle. Since __i915_vma_retire() may be called from atomic contexts, use async variant of wakeref put. Also, to avoid circular locking dependency, take care of acquiring the wakeref before VM mutex when both are needed. v7: Add inline comments with justifications for: - using untracked variants of intel_gt_pm_get/put() (Nirmoy), - using async variant of _put(), - not getting the wakeref in case of a global GTT, - always getting the first wakeref outside vm->mutex. v6: Since __i915_vma_active/retire() callbacks are not serialized, storing a wakeref tracking handle inside struct i915_vma is not safe, and there is no other good place for that. Use untracked variants of intel_gt_pm_get/put_async(). v5: Replace "tile" with "GT" across commit description (Rodrigo), - ---truncated--- | ||||
| CVE-2024-26937 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Reset queue_priority_hint on parking Originally, with strict in order execution, we could complete execution only when the queue was empty. Preempt-to-busy allows replacement of an active request that may complete before the preemption is processed by HW. If that happens, the request is retired from the queue, but the queue_priority_hint remains set, preventing direct submission until after the next CS interrupt is processed. This preempt-to-busy race can be triggered by the heartbeat, which will also act as the power-management barrier and upon completion allow us to idle the HW. We may process the completion of the heartbeat, and begin parking the engine before the CS event that restores the queue_priority_hint, causing us to fail the assertion that it is MIN. <3>[ 166.210729] __engine_park:283 GEM_BUG_ON(engine->sched_engine->queue_priority_hint != (-((int)(~0U >> 1)) - 1)) <0>[ 166.210781] Dumping ftrace buffer: <0>[ 166.210795] --------------------------------- ... <0>[ 167.302811] drm_fdin-1097 2..s1. 165741070us : trace_ports: 0000:00:02.0 rcs0: promote { ccid:20 1217:2 prio 0 } <0>[ 167.302861] drm_fdin-1097 2d.s2. 165741072us : execlists_submission_tasklet: 0000:00:02.0 rcs0: preempting last=1217:2, prio=0, hint=2147483646 <0>[ 167.302928] drm_fdin-1097 2d.s2. 165741072us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 1217:2, current 0 <0>[ 167.302992] drm_fdin-1097 2d.s2. 165741073us : __i915_request_submit: 0000:00:02.0 rcs0: fence 3:4660, current 4659 <0>[ 167.303044] drm_fdin-1097 2d.s1. 165741076us : execlists_submission_tasklet: 0000:00:02.0 rcs0: context:3 schedule-in, ccid:40 <0>[ 167.303095] drm_fdin-1097 2d.s1. 165741077us : trace_ports: 0000:00:02.0 rcs0: submit { ccid:40 3:4660* prio 2147483646 } <0>[ 167.303159] kworker/-89 11..... 165741139us : i915_request_retire.part.0: 0000:00:02.0 rcs0: fence c90:2, current 2 <0>[ 167.303208] kworker/-89 11..... 165741148us : __intel_context_do_unpin: 0000:00:02.0 rcs0: context:c90 unpin <0>[ 167.303272] kworker/-89 11..... 165741159us : i915_request_retire.part.0: 0000:00:02.0 rcs0: fence 1217:2, current 2 <0>[ 167.303321] kworker/-89 11..... 165741166us : __intel_context_do_unpin: 0000:00:02.0 rcs0: context:1217 unpin <0>[ 167.303384] kworker/-89 11..... 165741170us : i915_request_retire.part.0: 0000:00:02.0 rcs0: fence 3:4660, current 4660 <0>[ 167.303434] kworker/-89 11d..1. 165741172us : __intel_context_retire: 0000:00:02.0 rcs0: context:1216 retire runtime: { total:56028ns, avg:56028ns } <0>[ 167.303484] kworker/-89 11..... 165741198us : __engine_park: 0000:00:02.0 rcs0: parked <0>[ 167.303534] <idle>-0 5d.H3. 165741207us : execlists_irq_handler: 0000:00:02.0 rcs0: semaphore yield: 00000040 <0>[ 167.303583] kworker/-89 11..... 165741397us : __intel_context_retire: 0000:00:02.0 rcs0: context:1217 retire runtime: { total:325575ns, avg:0ns } <0>[ 167.303756] kworker/-89 11..... 165741777us : __intel_context_retire: 0000:00:02.0 rcs0: context:c90 retire runtime: { total:0ns, avg:0ns } <0>[ 167.303806] kworker/-89 11..... 165742017us : __engine_park: __engine_park:283 GEM_BUG_ON(engine->sched_engine->queue_priority_hint != (-((int)(~0U >> 1)) - 1)) <0>[ 167.303811] --------------------------------- <4>[ 167.304722] ------------[ cut here ]------------ <2>[ 167.304725] kernel BUG at drivers/gpu/drm/i915/gt/intel_engine_pm.c:283! <4>[ 167.304731] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI <4>[ 167.304734] CPU: 11 PID: 89 Comm: kworker/11:1 Tainted: G W 6.8.0-rc2-CI_DRM_14193-gc655e0fd2804+ #1 <4>[ 167.304736] Hardware name: Intel Corporation Rocket Lake Client Platform/RocketLake S UDIMM 6L RVP, BIOS RKLSFWI1.R00.3173.A03.2204210138 04/21/2022 <4>[ 167.304738] Workqueue: i915-unordered retire_work_handler [i915] <4>[ 16 ---truncated--- | ||||
| CVE-2024-26934 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: core: Fix deadlock in usb_deauthorize_interface() Among the attribute file callback routines in drivers/usb/core/sysfs.c, the interface_authorized_store() function is the only one which acquires a device lock on an ancestor device: It calls usb_deauthorize_interface(), which locks the interface's parent USB device. The will lead to deadlock if another process already owns that lock and tries to remove the interface, whether through a configuration change or because the device has been disconnected. As part of the removal procedure, device_del() waits for all ongoing sysfs attribute callbacks to complete. But usb_deauthorize_interface() can't complete until the device lock has been released, and the lock won't be released until the removal has finished. The mechanism provided by sysfs to prevent this kind of deadlock is to use the sysfs_break_active_protection() function, which tells sysfs not to wait for the attribute callback. Reported-and-tested by: Yue Sun <samsun1006219@gmail.com> Reported by: xingwei lee <xrivendell7@gmail.com> | ||||
| CVE-2024-26933 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: core: Fix deadlock in port "disable" sysfs attribute The show and store callback routines for the "disable" sysfs attribute file in port.c acquire the device lock for the port's parent hub device. This can cause problems if another process has locked the hub to remove it or change its configuration: Removing the hub or changing its configuration requires the hub interface to be removed, which requires the port device to be removed, and device_del() waits until all outstanding sysfs attribute callbacks for the ports have returned. The lock can't be released until then. But the disable_show() or disable_store() routine can't return until after it has acquired the lock. The resulting deadlock can be avoided by calling sysfs_break_active_protection(). This will cause the sysfs core not to wait for the attribute's callback routine to return, allowing the removal to proceed. The disadvantage is that after making this call, there is no guarantee that the hub structure won't be deallocated at any moment. To prevent this, we have to acquire a reference to it first by calling hub_get(). | ||||
| CVE-2024-26931 | 1 Redhat | 2 Enterprise Linux, Rhel Eus | 2025-05-04 | 5.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix command flush on cable pull System crash due to command failed to flush back to SCSI layer. BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 27 PID: 793455 Comm: kworker/u130:6 Kdump: loaded Tainted: G OE --------- - - 4.18.0-372.9.1.el8.x86_64 #1 Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 09/03/2021 Workqueue: nvme-wq nvme_fc_connect_ctrl_work [nvme_fc] RIP: 0010:__wake_up_common+0x4c/0x190 Code: 24 10 4d 85 c9 74 0a 41 f6 01 04 0f 85 9d 00 00 00 48 8b 43 08 48 83 c3 08 4c 8d 48 e8 49 8d 41 18 48 39 c3 0f 84 f0 00 00 00 <49> 8b 41 18 89 54 24 08 31 ed 4c 8d 70 e8 45 8b 29 41 f6 c5 04 75 RSP: 0018:ffff95f3e0cb7cd0 EFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff8b08d3b26328 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffff8b08d3b26320 RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffffffffffe8 R10: 0000000000000000 R11: ffff95f3e0cb7a60 R12: ffff95f3e0cb7d20 R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8b2fdf6c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000002f1e410002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __wake_up_common_lock+0x7c/0xc0 qla_nvme_ls_req+0x355/0x4c0 [qla2xxx] qla2xxx [0000:12:00.1]-f084:3: qlt_free_session_done: se_sess 0000000000000000 / sess ffff8ae1407ca000 from port 21:32:00:02:ac:07:ee:b8 loop_id 0x02 s_id 01:02:00 logout 1 keep 0 els_logo 0 ? __nvme_fc_send_ls_req+0x260/0x380 [nvme_fc] qla2xxx [0000:12:00.1]-207d:3: FCPort 21:32:00:02:ac:07:ee:b8 state transitioned from ONLINE to LOST - portid=010200. ? nvme_fc_send_ls_req.constprop.42+0x1a/0x45 [nvme_fc] qla2xxx [0000:12:00.1]-2109:3: qla2x00_schedule_rport_del 21320002ac07eeb8. rport ffff8ae598122000 roles 1 ? nvme_fc_connect_ctrl_work.cold.63+0x1e3/0xa7d [nvme_fc] qla2xxx [0000:12:00.1]-f084:3: qlt_free_session_done: se_sess 0000000000000000 / sess ffff8ae14801e000 from port 21:32:01:02:ad:f7:ee:b8 loop_id 0x04 s_id 01:02:01 logout 1 keep 0 els_logo 0 ? __switch_to+0x10c/0x450 ? process_one_work+0x1a7/0x360 qla2xxx [0000:12:00.1]-207d:3: FCPort 21:32:01:02:ad:f7:ee:b8 state transitioned from ONLINE to LOST - portid=010201. ? worker_thread+0x1ce/0x390 ? create_worker+0x1a0/0x1a0 qla2xxx [0000:12:00.1]-2109:3: qla2x00_schedule_rport_del 21320102adf7eeb8. rport ffff8ae3b2312800 roles 70 ? kthread+0x10a/0x120 qla2xxx [0000:12:00.1]-2112:3: qla_nvme_unregister_remote_port: unregister remoteport on ffff8ae14801e000 21320102adf7eeb8 ? set_kthread_struct+0x40/0x40 qla2xxx [0000:12:00.1]-2110:3: remoteport_delete of ffff8ae14801e000 21320102adf7eeb8 completed. ? ret_from_fork+0x1f/0x40 qla2xxx [0000:12:00.1]-f086:3: qlt_free_session_done: waiting for sess ffff8ae14801e000 logout The system was under memory stress where driver was not able to allocate an SRB to carry out error recovery of cable pull. The failure to flush causes upper layer to start modifying scsi_cmnd. When the system frees up some memory, the subsequent cable pull trigger another command flush. At this point the driver access a null pointer when attempting to DMA unmap the SGL. Add a check to make sure commands are flush back on session tear down to prevent the null pointer access. | ||||
| CVE-2024-26930 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix double free of the ha->vp_map pointer Coverity scan reported potential risk of double free of the pointer ha->vp_map. ha->vp_map was freed in qla2x00_mem_alloc(), and again freed in function qla2x00_mem_free(ha). Assign NULL to vp_map and kfree take care of NULL. | ||||
| CVE-2024-26927 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Add some bounds checking to firmware data Smatch complains about "head->full_size - head->header_size" can underflow. To some extent, we're always going to have to trust the firmware a bit. However, it's easy enough to add a check for negatives, and let's add a upper bounds check as well. | ||||
| CVE-2024-26923 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2025-05-04 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix garbage collector racing against connect() Garbage collector does not take into account the risk of embryo getting enqueued during the garbage collection. If such embryo has a peer that carries SCM_RIGHTS, two consecutive passes of scan_children() may see a different set of children. Leading to an incorrectly elevated inflight count, and then a dangling pointer within the gc_inflight_list. sockets are AF_UNIX/SOCK_STREAM S is an unconnected socket L is a listening in-flight socket bound to addr, not in fdtable V's fd will be passed via sendmsg(), gets inflight count bumped connect(S, addr) sendmsg(S, [V]); close(V) __unix_gc() ---------------- ------------------------- ----------- NS = unix_create1() skb1 = sock_wmalloc(NS) L = unix_find_other(addr) unix_state_lock(L) unix_peer(S) = NS // V count=1 inflight=0 NS = unix_peer(S) skb2 = sock_alloc() skb_queue_tail(NS, skb2[V]) // V became in-flight // V count=2 inflight=1 close(V) // V count=1 inflight=1 // GC candidate condition met for u in gc_inflight_list: if (total_refs == inflight_refs) add u to gc_candidates // gc_candidates={L, V} for u in gc_candidates: scan_children(u, dec_inflight) // embryo (skb1) was not // reachable from L yet, so V's // inflight remains unchanged __skb_queue_tail(L, skb1) unix_state_unlock(L) for u in gc_candidates: if (u.inflight) scan_children(u, inc_inflight_move_tail) // V count=1 inflight=2 (!) If there is a GC-candidate listening socket, lock/unlock its state. This makes GC wait until the end of any ongoing connect() to that socket. After flipping the lock, a possibly SCM-laden embryo is already enqueued. And if there is another embryo coming, it can not possibly carry SCM_RIGHTS. At this point, unix_inflight() can not happen because unix_gc_lock is already taken. Inflight graph remains unaffected. | ||||
| CVE-2024-26907 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix fortify source warning while accessing Eth segment ------------[ cut here ]------------ memcpy: detected field-spanning write (size 56) of single field "eseg->inline_hdr.start" at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 (size 2) WARNING: CPU: 0 PID: 293779 at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] Modules linked in: 8021q garp mrp stp llc rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) ib_core(OE) mlx5_core(OE) pci_hyperv_intf mlxdevm(OE) mlx_compat(OE) tls mlxfw(OE) psample nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink mst_pciconf(OE) knem(OE) vfio_pci vfio_pci_core vfio_iommu_type1 vfio iommufd irqbypass cuse nfsv3 nfs fscache netfs xfrm_user xfrm_algo ipmi_devintf ipmi_msghandler binfmt_misc crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 snd_pcsp aesni_intel crypto_simd cryptd snd_pcm snd_timer joydev snd soundcore input_leds serio_raw evbug nfsd auth_rpcgss nfs_acl lockd grace sch_fq_codel sunrpc drm efi_pstore ip_tables x_tables autofs4 psmouse virtio_net net_failover failover floppy [last unloaded: mlx_compat(OE)] CPU: 0 PID: 293779 Comm: ssh Tainted: G OE 6.2.0-32-generic #32~22.04.1-Ubuntu Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] Code: 0c 01 00 a8 01 75 25 48 8b 75 a0 b9 02 00 00 00 48 c7 c2 10 5b fd c0 48 c7 c7 80 5b fd c0 c6 05 57 0c 03 00 01 e8 95 4d 93 da <0f> 0b 44 8b 4d b0 4c 8b 45 c8 48 8b 4d c0 e9 49 fb ff ff 41 0f b7 RSP: 0018:ffffb5b48478b570 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffb5b48478b628 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffb5b48478b5e8 R13: ffff963a3c609b5e R14: ffff9639c3fbd800 R15: ffffb5b480475a80 FS: 00007fc03b444c80(0000) GS:ffff963a3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556f46bdf000 CR3: 0000000006ac6003 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? show_regs+0x72/0x90 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] ? __warn+0x8d/0x160 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] ? report_bug+0x1bb/0x1d0 ? handle_bug+0x46/0x90 ? exc_invalid_op+0x19/0x80 ? asm_exc_invalid_op+0x1b/0x20 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] mlx5_ib_post_send_nodrain+0xb/0x20 [mlx5_ib] ipoib_send+0x2ec/0x770 [ib_ipoib] ipoib_start_xmit+0x5a0/0x770 [ib_ipoib] dev_hard_start_xmit+0x8e/0x1e0 ? validate_xmit_skb_list+0x4d/0x80 sch_direct_xmit+0x116/0x3a0 __dev_xmit_skb+0x1fd/0x580 __dev_queue_xmit+0x284/0x6b0 ? _raw_spin_unlock_irq+0xe/0x50 ? __flush_work.isra.0+0x20d/0x370 ? push_pseudo_header+0x17/0x40 [ib_ipoib] neigh_connected_output+0xcd/0x110 ip_finish_output2+0x179/0x480 ? __smp_call_single_queue+0x61/0xa0 __ip_finish_output+0xc3/0x190 ip_finish_output+0x2e/0xf0 ip_output+0x78/0x110 ? __pfx_ip_finish_output+0x10/0x10 ip_local_out+0x64/0x70 __ip_queue_xmit+0x18a/0x460 ip_queue_xmit+0x15/0x30 __tcp_transmit_skb+0x914/0x9c0 tcp_write_xmit+0x334/0x8d0 tcp_push_one+0x3c/0x60 tcp_sendmsg_locked+0x2e1/0xac0 tcp_sendmsg+0x2d/0x50 inet_sendmsg+0x43/0x90 sock_sendmsg+0x68/0x80 sock_write_iter+0x93/0x100 vfs_write+0x326/0x3c0 ksys_write+0xbd/0xf0 ? do_syscall_64+0x69/0x90 __x64_sys_write+0x19/0x30 do_syscall_ ---truncated--- | ||||
| CVE-2024-26903 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: rfcomm: Fix null-ptr-deref in rfcomm_check_security During our fuzz testing of the connection and disconnection process at the RFCOMM layer, we discovered this bug. By comparing the packets from a normal connection and disconnection process with the testcase that triggered a KASAN report. We analyzed the cause of this bug as follows: 1. In the packets captured during a normal connection, the host sends a `Read Encryption Key Size` type of `HCI_CMD` packet (Command Opcode: 0x1408) to the controller to inquire the length of encryption key.After receiving this packet, the controller immediately replies with a Command Completepacket (Event Code: 0x0e) to return the Encryption Key Size. 2. In our fuzz test case, the timing of the controller's response to this packet was delayed to an unexpected point: after the RFCOMM and L2CAP layers had disconnected but before the HCI layer had disconnected. 3. After receiving the Encryption Key Size Response at the time described in point 2, the host still called the rfcomm_check_security function. However, by this time `struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn;` had already been released, and when the function executed `return hci_conn_security(conn->hcon, d->sec_level, auth_type, d->out);`, specifically when accessing `conn->hcon`, a null-ptr-deref error occurred. To fix this bug, check if `sk->sk_state` is BT_CLOSED before calling rfcomm_recv_frame in rfcomm_process_rx. | ||||