Total
2051 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23444 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: always free skb on ieee80211_tx_prepare_skb() failure ieee80211_tx_prepare_skb() has three error paths, but only two of them free the skb. The first error path (ieee80211_tx_prepare() returning TX_DROP) does not free it, while invoke_tx_handlers() failure and the fragmentation check both do. Add kfree_skb() to the first error path so all three are consistent, and remove the now-redundant frees in callers (ath9k, mt76, mac80211_hwsim) to avoid double-free. Document the skb ownership guarantee in the function's kdoc. | ||||
| CVE-2026-23399 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nf_tables: nft_dynset: fix possible stateful expression memleak in error path If cloning the second stateful expression in the element via GFP_ATOMIC fails, then the first stateful expression remains in place without being released. unreferenced object (percpu) 0x607b97e9cab8 (size 16): comm "softirq", pid 0, jiffies 4294931867 hex dump (first 16 bytes on cpu 3): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 backtrace (crc 0): pcpu_alloc_noprof+0x453/0xd80 nft_counter_clone+0x9c/0x190 [nf_tables] nft_expr_clone+0x8f/0x1b0 [nf_tables] nft_dynset_new+0x2cb/0x5f0 [nf_tables] nft_rhash_update+0x236/0x11c0 [nf_tables] nft_dynset_eval+0x11f/0x670 [nf_tables] nft_do_chain+0x253/0x1700 [nf_tables] nft_do_chain_ipv4+0x18d/0x270 [nf_tables] nf_hook_slow+0xaa/0x1e0 ip_local_deliver+0x209/0x330 | ||||
| CVE-2026-23389 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ice: Fix memory leak in ice_set_ringparam() In ice_set_ringparam, tx_rings and xdp_rings are allocated before rx_rings. If the allocation of rx_rings fails, the code jumps to the done label leaking both tx_rings and xdp_rings. Furthermore, if the setup of an individual Rx ring fails during the loop, the code jumps to the free_tx label which releases tx_rings but leaks xdp_rings. Fix this by introducing a free_xdp label and updating the error paths to ensure both xdp_rings and tx_rings are properly freed if rx_rings allocation or setup fails. Compile tested only. Issue found using a prototype static analysis tool and code review. | ||||
| CVE-2022-49822 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: Fix connections leak when tlink setup failed If the tlink setup failed, lost to put the connections, then the module refcnt leak since the cifsd kthread not exit. Also leak the fscache info, and for next mount with fsc, it will print the follow errors: CIFS: Cache volume key already in use (cifs,127.0.0.1:445,TEST) Let's check the result of tlink setup, and do some cleanup. | ||||
| CVE-2022-49183 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: fix ref leak when switching zones When switching zones or network namespaces without doing a ct clear in between, it is now leaking a reference to the old ct entry. That's because tcf_ct_skb_nfct_cached() returns false and tcf_ct_flow_table_lookup() may simply overwrite it. The fix is to, as the ct entry is not reusable, free it already at tcf_ct_skb_nfct_cached(). | ||||
| CVE-2022-49135 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix memory leak [why] Resource release is needed on the error handling path to prevent memory leak. [how] Fix this by adding kfree on the error handling path. | ||||
| CVE-2026-23260 | 1 Linux | 1 Linux Kernel | 2026-05-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regmap: maple: free entry on mas_store_gfp() failure regcache_maple_write() allocates a new block ('entry') to merge adjacent ranges and then stores it with mas_store_gfp(). When mas_store_gfp() fails, the new 'entry' remains allocated and is never freed, leaking memory. Free 'entry' on the failure path; on success continue freeing the replaced neighbor blocks ('lower', 'upper'). | ||||
| CVE-2026-23258 | 1 Linux | 1 Linux Kernel | 2026-05-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: liquidio: Initialize netdev pointer before queue setup In setup_nic_devices(), the netdev is allocated using alloc_etherdev_mq(). However, the pointer to this structure is stored in oct->props[i].netdev only after the calls to netif_set_real_num_rx_queues() and netif_set_real_num_tx_queues(). If either of these functions fails, setup_nic_devices() returns an error without freeing the allocated netdev. Since oct->props[i].netdev is still NULL at this point, the cleanup function liquidio_destroy_nic_device() will fail to find and free the netdev, resulting in a memory leak. Fix this by initializing oct->props[i].netdev before calling the queue setup functions. This ensures that the netdev is properly accessible for cleanup in case of errors. Compile tested only. Issue found using a prototype static analysis tool and code review. | ||||
| CVE-2026-43069 | 1 Linux | 1 Linux Kernel | 2026-05-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_ll: Fix firmware leak on error path Smatch reports: drivers/bluetooth/hci_ll.c:587 download_firmware() warn: 'fw' from request_firmware() not released on lines: 544. In download_firmware(), if request_firmware() succeeds but the returned firmware content is invalid (no data or zero size), the function returns without releasing the firmware, resulting in a resource leak. Fix this by calling release_firmware() before returning when request_firmware() succeeded but the firmware content is invalid. | ||||
| CVE-2026-43066 | 1 Linux | 1 Linux Kernel | 2026-05-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix iloc.bh leak in ext4_fc_replay_inode() error paths During code review, Joseph found that ext4_fc_replay_inode() calls ext4_get_fc_inode_loc() to get the inode location, which holds a reference to iloc.bh that must be released via brelse(). However, several error paths jump to the 'out' label without releasing iloc.bh: - ext4_handle_dirty_metadata() failure - sync_dirty_buffer() failure - ext4_mark_inode_used() failure - ext4_iget() failure Fix this by introducing an 'out_brelse' label placed just before the existing 'out' label to ensure iloc.bh is always released. Additionally, make ext4_fc_replay_inode() propagate errors properly instead of always returning 0. | ||||
| CVE-2026-23297 | 1 Linux | 1 Linux Kernel | 2026-05-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: Fix cred ref leak in nfsd_nl_threads_set_doit(). syzbot reported memory leak of struct cred. [0] nfsd_nl_threads_set_doit() passes get_current_cred() to nfsd_svc(), but put_cred() is not called after that. The cred is finally passed down to _svc_xprt_create(), which calls get_cred() with the cred for struct svc_xprt. The ownership of the refcount by get_current_cred() is not transferred to anywhere and is just leaked. nfsd_svc() is also called from write_threads(), but it does not bump file->f_cred there. nfsd_nl_threads_set_doit() is called from sendmsg() and current->cred does not go away. Let's use current_cred() in nfsd_nl_threads_set_doit(). [0]: BUG: memory leak unreferenced object 0xffff888108b89480 (size 184): comm "syz-executor", pid 5994, jiffies 4294943386 hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 369454a7): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4958 [inline] slab_alloc_node mm/slub.c:5263 [inline] kmem_cache_alloc_noprof+0x412/0x580 mm/slub.c:5270 prepare_creds+0x22/0x600 kernel/cred.c:185 copy_creds+0x44/0x290 kernel/cred.c:286 copy_process+0x7a7/0x2870 kernel/fork.c:2086 kernel_clone+0xac/0x6e0 kernel/fork.c:2651 __do_sys_clone+0x7f/0xb0 kernel/fork.c:2792 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xa4/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2026-46141 | 1 Linux | 1 Linux Kernel | 2026-05-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/xive: fix kmemleak caused by incorrect chip_data lookup The kmemleak reports the following memory leak: Unreferenced object 0xc0000002a7fbc640 (size 64): comm "kworker/8:1", pid 540, jiffies 4294937872 hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 09 04 00 04 00 00 ................ 00 00 a7 81 00 00 0a c0 00 00 08 04 00 04 00 00 ................ backtrace (crc 177d48f6): __kmalloc_cache_noprof+0x520/0x730 xive_irq_alloc_data.constprop.0+0x40/0xe0 xive_irq_domain_alloc+0xd0/0x1b0 irq_domain_alloc_irqs_parent+0x44/0x6c pseries_irq_domain_alloc+0x1cc/0x354 irq_domain_alloc_irqs_parent+0x44/0x6c msi_domain_alloc+0xb0/0x220 irq_domain_alloc_irqs_locked+0x138/0x4d0 __irq_domain_alloc_irqs+0x8c/0xfc __msi_domain_alloc_irqs+0x214/0x4d8 msi_domain_alloc_irqs_all_locked+0x70/0xf8 pci_msi_setup_msi_irqs+0x60/0x78 __pci_enable_msix_range+0x54c/0x98c pci_alloc_irq_vectors_affinity+0x16c/0x1d4 nvme_pci_enable+0xac/0x9c0 [nvme] nvme_probe+0x340/0x764 [nvme] This occurs when allocating MSI-X vectors for an NVMe device. During allocation the XIVE code creates a struct xive_irq_data and stores it in irq_data->chip_data. When the MSI-X irqdomain is later freed, xive_irq_free_data() is responsible for retrieving this structure and freeing it. However, after commit cc0cc23babc9 ("powerpc/xive: Untangle xive from child interrupt controller drivers"), xive_irq_free_data() retrieves the chip_data using irq_get_chip_data(), which looks up the data through the child domain. This is incorrect because the XIVE-specific irq data is associated with the XIVE (parent) domain. As a result the lookup fails and the allocated struct xive_irq_data is never freed, leading to the kmemleak report shown above. Fix this by retrieving the irq_data from the correct domain using irq_domain_get_irq_data() and then accessing the chip_data via irq_data_get_irq_chip_data(). | ||||
| CVE-2025-71312 | 1 Linux | 1 Linux Kernel | 2026-05-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: fix ntfs_mount_options leak in ntfs_fill_super() In ntfs_fill_super(), the fc->fs_private pointer is set to NULL without first freeing the memory it points to. This causes the subsequent call to ntfs_fs_free() to skip freeing the ntfs_mount_options structure. This results in a kmemleak report: unreferenced object 0xff1100015378b800 (size 32): comm "mount", pid 582, jiffies 4294890685 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 ed ff ed ff 00 04 00 00 ................ backtrace (crc ed541d8c): __kmalloc_cache_noprof+0x424/0x5a0 __ntfs_init_fs_context+0x47/0x590 alloc_fs_context+0x5d8/0x960 __x64_sys_fsopen+0xb1/0x190 do_syscall_64+0x50/0x1f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e This issue can be reproduced using the following commands: fallocate -l 100M test.file mount test.file /tmp/test Since sbi->options is duplicated from fc->fs_private and does not directly use the memory allocated for fs_private, it is unnecessary to set fc->fs_private to NULL. Additionally, this patch simplifies the code by utilizing the helper function put_mount_options() instead of open-coding the cleanup logic. | ||||
| CVE-2023-25136 | 4 Fedoraproject, Netapp, Openbsd and 1 more | 10 Fedora, 500f, 500f Firmware and 7 more | 2026-05-28 | 6.5 Medium |
| OpenSSH server (sshd) 9.1 introduced a double-free vulnerability during options.kex_algorithms handling. This is fixed in OpenSSH 9.2. The double free can be leveraged, by an unauthenticated remote attacker in the default configuration, to jump to any location in the sshd address space. One third-party report states "remote code execution is theoretically possible." | ||||
| CVE-2019-6129 | 1 Libpng | 1 Libpng | 2026-05-28 | 6.5 Medium |
| png_create_info_struct in png.c in libpng 1.6.36 has a memory leak, as demonstrated by pngcp. NOTE: a third party has stated "I don't think it is libpng's job to free this buffer. | ||||
| CVE-2026-45881 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc: mediatek: svs: Fix memory leak in svs_enable_debug_write() In svs_enable_debug_write(), the buf allocated by memdup_user_nul() is leaked if kstrtoint() fails. Fix this by using __free(kfree) to automatically free buf, eliminating the need for explicit kfree() calls and preventing leaks. [Angelo: Added missing cleanup.h inclusion] | ||||
| CVE-2026-45921 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mtd: parsers: Fix memory leak in mtd_parser_tplink_safeloader_parse() The function mtd_parser_tplink_safeloader_parse() allocates buf via mtd_parser_tplink_safeloader_read_table(). If the allocation for parts[idx].name fails inside the loop, the code jumps to the err_free label without freeing buf, leading to a memory leak. Fix this by freeing the temporary buffer buf in the err_free label. Compile tested only. Issue found using a prototype static analysis tool and code review. | ||||
| CVE-2026-45928 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix memory leak on codec_info allocation failure In wave5_vpu_open_enc() and wave5_vpu_open_dec(), a vpu instance is allocated via kzalloc(). If the subsequent allocation for inst->codec_info fails, the functions return -ENOMEM without freeing the previously allocated instance, causing a memory leak. Fix this by calling kfree() on the instance in this error path to ensure it is properly released. | ||||
| CVE-2026-45926 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rust: pwm: Fix potential memory leak on init error When initializing a PWM chip using pwmchip_alloc(), the allocated device owns an initial reference that must be released on all error paths. If __pinned_init() were to fail, the allocated pwm_chip would currently leak because the error path returns without calling pwmchip_put(). | ||||
| CVE-2026-45939 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpib: Fix memory leak in ni_usb_init() In ni_usb_init(), if ni_usb_setup_init() fails, the function returns -EFAULT without freeing the allocated writes buffer, leading to a memory leak. Additionally, ni_usb_setup_init() returns 0 on failure, which causes ni_usb_init() to return -EFAULT, an inappropriate error code for this situation. Fix the leak by freeing writes in the error path. Modify ni_usb_setup_init() to return -EINVAL on failure and propagate this error code in ni_usb_init(). | ||||