Filtered by vendor Redhat
Subscriptions
Total
22961 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-49429 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Prevent panic when SDMA is disabled If the hfi1 module is loaded with HFI1_CAP_SDMA off, a call to hfi1_write_iter() will dereference a NULL pointer and panic. A typical stack frame is: sdma_select_user_engine [hfi1] hfi1_user_sdma_process_request [hfi1] hfi1_write_iter [hfi1] do_iter_readv_writev do_iter_write vfs_writev do_writev do_syscall_64 The fix is to test for SDMA in hfi1_write_iter() and fail the I/O with EINVAL. | ||||
| CVE-2022-49426 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3-sva: Fix mm use-after-free We currently call arm64_mm_context_put() without holding a reference to the mm, which can result in use-after-free. Call mmgrab()/mmdrop() to ensure the mm only gets freed after we unpinned the ASID. | ||||
| CVE-2022-49416 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix use-after-free in chanctx code In ieee80211_vif_use_reserved_context(), when we have an old context and the new context's replace_state is set to IEEE80211_CHANCTX_REPLACE_NONE, we free the old context in ieee80211_vif_use_reserved_reassign(). Therefore, we cannot check the old_ctx anymore, so we should set it to NULL after this point. However, since the new_ctx replace state is clearly not IEEE80211_CHANCTX_REPLACES_OTHER, we're not going to do anything else in this function and can just return to avoid accessing the freed old_ctx. | ||||
| CVE-2022-49413 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bfq: Update cgroup information before merging bio When the process is migrated to a different cgroup (or in case of writeback just starts submitting bios associated with a different cgroup) bfq_merge_bio() can operate with stale cgroup information in bic. Thus the bio can be merged to a request from a different cgroup or it can result in merging of bfqqs for different cgroups or bfqqs of already dead cgroups and causing possible use-after-free issues. Fix the problem by updating cgroup information in bfq_merge_bio(). | ||||
| CVE-2022-49408 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix memory leak in parse_apply_sb_mount_options() If processing the on-disk mount options fails after any memory was allocated in the ext4_fs_context, e.g. s_qf_names, then this memory is leaked. Fix this by calling ext4_fc_free() instead of kfree() directly. Reproducer: mkfs.ext4 -F /dev/vdc tune2fs /dev/vdc -E mount_opts=usrjquota=file echo clear > /sys/kernel/debug/kmemleak mount /dev/vdc /vdc echo scan > /sys/kernel/debug/kmemleak sleep 5 echo scan > /sys/kernel/debug/kmemleak cat /sys/kernel/debug/kmemleak | ||||
| CVE-2022-49407 | 1 Redhat | 1 Rhel E4s | 2025-05-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: dlm: fix plock invalid read This patch fixes an invalid read showed by KASAN. A unlock will allocate a "struct plock_op" and a followed send_op() will append it to a global send_list data structure. In some cases a followed dev_read() moves it to recv_list and dev_write() will cast it to "struct plock_xop" and access fields which are only available in those structures. At this point an invalid read happens by accessing those fields. To fix this issue the "callback" field is moved to "struct plock_op" to indicate that a cast to "plock_xop" is allowed and does the additional "plock_xop" handling if set. Example of the KASAN output which showed the invalid read: [ 2064.296453] ================================================================== [ 2064.304852] BUG: KASAN: slab-out-of-bounds in dev_write+0x52b/0x5a0 [dlm] [ 2064.306491] Read of size 8 at addr ffff88800ef227d8 by task dlm_controld/7484 [ 2064.308168] [ 2064.308575] CPU: 0 PID: 7484 Comm: dlm_controld Kdump: loaded Not tainted 5.14.0+ #9 [ 2064.310292] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 2064.311618] Call Trace: [ 2064.312218] dump_stack_lvl+0x56/0x7b [ 2064.313150] print_address_description.constprop.8+0x21/0x150 [ 2064.314578] ? dev_write+0x52b/0x5a0 [dlm] [ 2064.315610] ? dev_write+0x52b/0x5a0 [dlm] [ 2064.316595] kasan_report.cold.14+0x7f/0x11b [ 2064.317674] ? dev_write+0x52b/0x5a0 [dlm] [ 2064.318687] dev_write+0x52b/0x5a0 [dlm] [ 2064.319629] ? dev_read+0x4a0/0x4a0 [dlm] [ 2064.320713] ? bpf_lsm_kernfs_init_security+0x10/0x10 [ 2064.321926] vfs_write+0x17e/0x930 [ 2064.322769] ? __fget_light+0x1aa/0x220 [ 2064.323753] ksys_write+0xf1/0x1c0 [ 2064.324548] ? __ia32_sys_read+0xb0/0xb0 [ 2064.325464] do_syscall_64+0x3a/0x80 [ 2064.326387] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 2064.327606] RIP: 0033:0x7f807e4ba96f [ 2064.328470] Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 39 87 f8 ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 7c 87 f8 ff 48 [ 2064.332902] RSP: 002b:00007ffd50cfe6e0 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 [ 2064.334658] RAX: ffffffffffffffda RBX: 000055cc3886eb30 RCX: 00007f807e4ba96f [ 2064.336275] RDX: 0000000000000040 RSI: 00007ffd50cfe7e0 RDI: 0000000000000010 [ 2064.337980] RBP: 00007ffd50cfe7e0 R08: 0000000000000000 R09: 0000000000000001 [ 2064.339560] R10: 000055cc3886eb30 R11: 0000000000000293 R12: 000055cc3886eb80 [ 2064.341237] R13: 000055cc3886eb00 R14: 000055cc3886f590 R15: 0000000000000001 [ 2064.342857] [ 2064.343226] Allocated by task 12438: [ 2064.344057] kasan_save_stack+0x1c/0x40 [ 2064.345079] __kasan_kmalloc+0x84/0xa0 [ 2064.345933] kmem_cache_alloc_trace+0x13b/0x220 [ 2064.346953] dlm_posix_unlock+0xec/0x720 [dlm] [ 2064.348811] do_lock_file_wait.part.32+0xca/0x1d0 [ 2064.351070] fcntl_setlk+0x281/0xbc0 [ 2064.352879] do_fcntl+0x5e4/0xfe0 [ 2064.354657] __x64_sys_fcntl+0x11f/0x170 [ 2064.356550] do_syscall_64+0x3a/0x80 [ 2064.358259] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 2064.360745] [ 2064.361511] Last potentially related work creation: [ 2064.363957] kasan_save_stack+0x1c/0x40 [ 2064.365811] __kasan_record_aux_stack+0xaf/0xc0 [ 2064.368100] call_rcu+0x11b/0xf70 [ 2064.369785] dlm_process_incoming_buffer+0x47d/0xfd0 [dlm] [ 2064.372404] receive_from_sock+0x290/0x770 [dlm] [ 2064.374607] process_recv_sockets+0x32/0x40 [dlm] [ 2064.377290] process_one_work+0x9a8/0x16e0 [ 2064.379357] worker_thread+0x87/0xbf0 [ 2064.381188] kthread+0x3ac/0x490 [ 2064.383460] ret_from_fork+0x22/0x30 [ 2064.385588] [ 2064.386518] Second to last potentially related work creation: [ 2064.389219] kasan_save_stack+0x1c/0x40 [ 2064.391043] __kasan_record_aux_stack+0xaf/0xc0 [ 2064.393303] call_rcu+0x11b/0xf70 [ 2064.394885] dlm_process_incoming_buffer+0x47d/0xfd0 [dlm] [ 2064.397694] receive_from_sock+0x290/0x770 ---truncated--- | ||||
| CVE-2022-49404 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Fix potential integer multiplication overflow errors When multiplying of different types, an overflow is possible even when storing the result in a larger type. This is because the conversion is done after the multiplication. So arithmetic overflow and thus in incorrect value is possible. Correct an instance of this in the inter packet delay calculation. Fix by ensuring one of the operands is u64 which will promote the other to u64 as well ensuring no overflow. | ||||
| CVE-2022-49401 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/page_owner: use strscpy() instead of strlcpy() current->comm[] is not a string (no guarantee for a zero byte in it). strlcpy(s1, s2, l) is calling strlen(s2), potentially causing out-of-bound access, as reported by syzbot: detected buffer overflow in __fortify_strlen ------------[ cut here ]------------ kernel BUG at lib/string_helpers.c:980! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 4087 Comm: dhcpcd-run-hooks Not tainted 5.18.0-rc3-syzkaller-01537-g20b87e7c29df #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:fortify_panic+0x18/0x1a lib/string_helpers.c:980 Code: 8c e8 c5 ba e1 fa e9 23 0f bf fa e8 0b 5d 8c f8 eb db 55 48 89 fd e8 e0 49 40 f8 48 89 ee 48 c7 c7 80 f5 26 8a e8 99 09 f1 ff <0f> 0b e8 ca 49 40 f8 48 8b 54 24 18 4c 89 f1 48 c7 c7 00 00 27 8a RSP: 0018:ffffc900000074a8 EFLAGS: 00010286 RAX: 000000000000002c RBX: ffff88801226b728 RCX: 0000000000000000 RDX: ffff8880198e0000 RSI: ffffffff81600458 RDI: fffff52000000e87 RBP: ffffffff89da2aa0 R08: 000000000000002c R09: 0000000000000000 R10: ffffffff815fae2e R11: 0000000000000000 R12: ffff88801226b700 R13: ffff8880198e0830 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f5876ad6ff8 CR3: 000000001a48c000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 Call Trace: <IRQ> __fortify_strlen include/linux/fortify-string.h:128 [inline] strlcpy include/linux/fortify-string.h:143 [inline] __set_page_owner_handle+0x2b1/0x3e0 mm/page_owner.c:171 __set_page_owner+0x3e/0x50 mm/page_owner.c:190 prep_new_page mm/page_alloc.c:2441 [inline] get_page_from_freelist+0xba2/0x3e00 mm/page_alloc.c:4182 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5408 alloc_pages+0x1aa/0x310 mm/mempolicy.c:2272 alloc_slab_page mm/slub.c:1799 [inline] allocate_slab+0x26c/0x3c0 mm/slub.c:1944 new_slab mm/slub.c:2004 [inline] ___slab_alloc+0x8df/0xf20 mm/slub.c:3005 __slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3092 slab_alloc_node mm/slub.c:3183 [inline] slab_alloc mm/slub.c:3225 [inline] __kmem_cache_alloc_lru mm/slub.c:3232 [inline] kmem_cache_alloc+0x360/0x3b0 mm/slub.c:3242 dst_alloc+0x146/0x1f0 net/core/dst.c:92 | ||||
| CVE-2022-49395 | 2 Linux, Redhat | 5 Linux Kernel, Enterprise Linux, Rhel Aus and 2 more | 2025-05-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: um: Fix out-of-bounds read in LDT setup syscall_stub_data() expects the data_count parameter to be the number of longs, not bytes. ================================================================== BUG: KASAN: stack-out-of-bounds in syscall_stub_data+0x70/0xe0 Read of size 128 at addr 000000006411f6f0 by task swapper/1 CPU: 0 PID: 1 Comm: swapper Not tainted 5.18.0+ #18 Call Trace: show_stack.cold+0x166/0x2a7 __dump_stack+0x3a/0x43 dump_stack_lvl+0x1f/0x27 print_report.cold+0xdb/0xf81 kasan_report+0x119/0x1f0 kasan_check_range+0x3a3/0x440 memcpy+0x52/0x140 syscall_stub_data+0x70/0xe0 write_ldt_entry+0xac/0x190 init_new_ldt+0x515/0x960 init_new_context+0x2c4/0x4d0 mm_init.constprop.0+0x5ed/0x760 mm_alloc+0x118/0x170 0x60033f48 do_one_initcall+0x1d7/0x860 0x60003e7b kernel_init+0x6e/0x3d4 new_thread_handler+0x1e7/0x2c0 The buggy address belongs to stack of task swapper/1 and is located at offset 64 in frame: init_new_ldt+0x0/0x960 This frame has 2 objects: [32, 40) 'addr' [64, 80) 'desc' ================================================================== | ||||
| CVE-2022-49379 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: driver core: Fix wait_for_device_probe() & deferred_probe_timeout interaction Mounting NFS rootfs was timing out when deferred_probe_timeout was non-zero [1]. This was because ip_auto_config() initcall times out waiting for the network interfaces to show up when deferred_probe_timeout was non-zero. While ip_auto_config() calls wait_for_device_probe() to make sure any currently running deferred probe work or asynchronous probe finishes, that wasn't sufficient to account for devices being deferred until deferred_probe_timeout. Commit 35a672363ab3 ("driver core: Ensure wait_for_device_probe() waits until the deferred_probe_timeout fires") tried to fix that by making sure wait_for_device_probe() waits for deferred_probe_timeout to expire before returning. However, if wait_for_device_probe() is called from the kernel_init() context: - Before deferred_probe_initcall() [2], it causes the boot process to hang due to a deadlock. - After deferred_probe_initcall() [3], it blocks kernel_init() from continuing till deferred_probe_timeout expires and beats the point of deferred_probe_timeout that's trying to wait for userspace to load modules. Neither of this is good. So revert the changes to wait_for_device_probe(). [1] - https://lore.kernel.org/lkml/TYAPR01MB45443DF63B9EF29054F7C41FD8C60@TYAPR01MB4544.jpnprd01.prod.outlook.com/ [2] - https://lore.kernel.org/lkml/YowHNo4sBjr9ijZr@dev-arch.thelio-3990X/ [3] - https://lore.kernel.org/lkml/Yo3WvGnNk3LvLb7R@linutronix.de/ | ||||
| CVE-2022-49378 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sfc: fix considering that all channels have TX queues Normally, all channels have RX and TX queues, but this is not true if modparam efx_separate_tx_channels=1 is used. In that cases, some channels only have RX queues and others only TX queues (or more preciselly, they have them allocated, but not initialized). Fix efx_channel_has_tx_queues to return the correct value for this case too. Messages shown at probe time before the fix: sfc 0000:03:00.0 ens6f0np0: MC command 0x82 inlen 544 failed rc=-22 (raw=0) arg=0 ------------[ cut here ]------------ netdevice: ens6f0np0: failed to initialise TXQ -1 WARNING: CPU: 1 PID: 626 at drivers/net/ethernet/sfc/ef10.c:2393 efx_ef10_tx_init+0x201/0x300 [sfc] [...] stripped RIP: 0010:efx_ef10_tx_init+0x201/0x300 [sfc] [...] stripped Call Trace: efx_init_tx_queue+0xaa/0xf0 [sfc] efx_start_channels+0x49/0x120 [sfc] efx_start_all+0x1f8/0x430 [sfc] efx_net_open+0x5a/0xe0 [sfc] __dev_open+0xd0/0x190 __dev_change_flags+0x1b3/0x220 dev_change_flags+0x21/0x60 [...] stripped Messages shown at remove time before the fix: sfc 0000:03:00.0 ens6f0np0: failed to flush 10 queues sfc 0000:03:00.0 ens6f0np0: failed to flush queues | ||||
| CVE-2022-49377 | 2 Linux, Redhat | 2 Linux Kernel, Rhel E4s | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: don't touch ->tagset in blk_mq_get_sq_hctx blk_mq_run_hw_queues() could be run when there isn't queued request and after queue is cleaned up, at that time tagset is freed, because tagset lifetime is covered by driver, and often freed after blk_cleanup_queue() returns. So don't touch ->tagset for figuring out current default hctx by the mapping built in request queue, so use-after-free on tagset can be avoided. Meantime this way should be fast than retrieving mapping from tagset. | ||||
| CVE-2022-49376 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: sd: Fix potential NULL pointer dereference If sd_probe() sees an early error before sdkp->device is initialized, sd_zbc_release_disk() is called. This causes a NULL pointer dereference when sd_is_zoned() is called inside that function. Avoid this by removing the call to sd_zbc_release_disk() in sd_probe() error path. This change is safe and does not result in zone information memory leakage because the zone information for a zoned disk is allocated only when sd_revalidate_disk() is called, at which point sdkp->disk_dev is fully set, resulting in sd_disk_release() being called when needed to cleanup a disk zone information using sd_zbc_release_disk(). | ||||
| CVE-2022-49374 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tipc: check attribute length for bearer name syzbot reported uninit-value: ===================================================== BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:644 [inline] BUG: KMSAN: uninit-value in string+0x4f9/0x6f0 lib/vsprintf.c:725 string_nocheck lib/vsprintf.c:644 [inline] string+0x4f9/0x6f0 lib/vsprintf.c:725 vsnprintf+0x2222/0x3650 lib/vsprintf.c:2806 vprintk_store+0x537/0x2150 kernel/printk/printk.c:2158 vprintk_emit+0x28b/0xab0 kernel/printk/printk.c:2256 vprintk_default+0x86/0xa0 kernel/printk/printk.c:2283 vprintk+0x15f/0x180 kernel/printk/printk_safe.c:50 _printk+0x18d/0x1cf kernel/printk/printk.c:2293 tipc_enable_bearer net/tipc/bearer.c:371 [inline] __tipc_nl_bearer_enable+0x2022/0x22a0 net/tipc/bearer.c:1033 tipc_nl_bearer_enable+0x6c/0xb0 net/tipc/bearer.c:1042 genl_family_rcv_msg_doit net/netlink/genetlink.c:731 [inline] - Do sanity check the attribute length for TIPC_NLA_BEARER_NAME. - Do not use 'illegal name' in printing message. | ||||
| CVE-2022-49372 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tcp: tcp_rtx_synack() can be called from process context Laurent reported the enclosed report [1] This bug triggers with following coditions: 0) Kernel built with CONFIG_DEBUG_PREEMPT=y 1) A new passive FastOpen TCP socket is created. This FO socket waits for an ACK coming from client to be a complete ESTABLISHED one. 2) A socket operation on this socket goes through lock_sock() release_sock() dance. 3) While the socket is owned by the user in step 2), a retransmit of the SYN is received and stored in socket backlog. 4) At release_sock() time, the socket backlog is processed while in process context. 5) A SYNACK packet is cooked in response of the SYN retransmit. 6) -> tcp_rtx_synack() is called in process context. Before blamed commit, tcp_rtx_synack() was always called from BH handler, from a timer handler. Fix this by using TCP_INC_STATS() & NET_INC_STATS() which do not assume caller is in non preemptible context. [1] BUG: using __this_cpu_add() in preemptible [00000000] code: epollpep/2180 caller is tcp_rtx_synack.part.0+0x36/0xc0 CPU: 10 PID: 2180 Comm: epollpep Tainted: G OE 5.16.0-0.bpo.4-amd64 #1 Debian 5.16.12-1~bpo11+1 Hardware name: Supermicro SYS-5039MC-H8TRF/X11SCD-F, BIOS 1.7 11/23/2021 Call Trace: <TASK> dump_stack_lvl+0x48/0x5e check_preemption_disabled+0xde/0xe0 tcp_rtx_synack.part.0+0x36/0xc0 tcp_rtx_synack+0x8d/0xa0 ? kmem_cache_alloc+0x2e0/0x3e0 ? apparmor_file_alloc_security+0x3b/0x1f0 inet_rtx_syn_ack+0x16/0x30 tcp_check_req+0x367/0x610 tcp_rcv_state_process+0x91/0xf60 ? get_nohz_timer_target+0x18/0x1a0 ? lock_timer_base+0x61/0x80 ? preempt_count_add+0x68/0xa0 tcp_v4_do_rcv+0xbd/0x270 __release_sock+0x6d/0xb0 release_sock+0x2b/0x90 sock_setsockopt+0x138/0x1140 ? __sys_getsockname+0x7e/0xc0 ? aa_sk_perm+0x3e/0x1a0 __sys_setsockopt+0x198/0x1e0 __x64_sys_setsockopt+0x21/0x30 do_syscall_64+0x38/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae | ||||
| CVE-2022-49371 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: driver core: fix deadlock in __device_attach In __device_attach function, The lock holding logic is as follows: ... __device_attach device_lock(dev) // get lock dev async_schedule_dev(__device_attach_async_helper, dev); // func async_schedule_node async_schedule_node_domain(func) entry = kzalloc(sizeof(struct async_entry), GFP_ATOMIC); /* when fail or work limit, sync to execute func, but __device_attach_async_helper will get lock dev as well, which will lead to A-A deadlock. */ if (!entry || atomic_read(&entry_count) > MAX_WORK) { func; else queue_work_node(node, system_unbound_wq, &entry->work) device_unlock(dev) As shown above, when it is allowed to do async probes, because of out of memory or work limit, async work is not allowed, to do sync execute instead. it will lead to A-A deadlock because of __device_attach_async_helper getting lock dev. To fix the deadlock, move the async_schedule_dev outside device_lock, as we can see, in async_schedule_node_domain, the parameter of queue_work_node is system_unbound_wq, so it can accept concurrent operations. which will also not change the code logic, and will not lead to deadlock. | ||||
| CVE-2022-49365 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Off by one in dm_dmub_outbox1_low_irq() The > ARRAY_SIZE() should be >= ARRAY_SIZE() to prevent an out of bounds access. | ||||
| CVE-2022-49362 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix potential use-after-free in nfsd_file_put() nfsd_file_put_noref() can free @nf, so don't dereference @nf immediately upon return from nfsd_file_put_noref(). | ||||
| CVE-2022-49356 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Trap RDMA segment overflows Prevent svc_rdma_build_writes() from walking off the end of a Write chunk's segment array. Caught with KASAN. The test that this fix replaces is invalid, and might have been left over from an earlier prototype of the PCL work. | ||||
| CVE-2022-49350 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: mdio: unexport __init-annotated mdio_bus_init() EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the only in-tree call-site, drivers/net/phy/phy_device.c is never compiled as modular. (CONFIG_PHYLIB is boolean) | ||||