Filtered by vendor Redhat
Subscriptions
Total
22961 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-49726 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: clocksource: hyper-v: unexport __init-annotated hv_init_clocksource() EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the only in-tree call-site, arch/x86/kernel/cpu/mshyperv.c is never compiled as modular. (CONFIG_HYPERVISOR_GUEST is boolean) | ||||
| CVE-2022-49723 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/reset: Fix error_state_read ptr + offset use Fix our pointer offset usage in error_state_read when there is no i915_gpu_coredump but buf offset is non-zero. This fixes a kernel page fault can happen when multiple tests are running concurrently in a loop and one is producing engine resets and consuming the i915 error_state dump while the other is forcing full GT resets. (takes a while to trigger). The dmesg call trace: [ 5590.803000] BUG: unable to handle page fault for address: ffffffffa0b0e000 [ 5590.803009] #PF: supervisor read access in kernel mode [ 5590.803013] #PF: error_code(0x0000) - not-present page [ 5590.803016] PGD 5814067 P4D 5814067 PUD 5815063 PMD 109de4067 PTE 0 [ 5590.803022] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 5590.803026] CPU: 5 PID: 13656 Comm: i915_hangman Tainted: G U 5.17.0-rc5-ups69-guc-err-capt-rev6+ #136 [ 5590.803033] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-M LP4x RVP, BIOS ADLPFWI1.R00. 3031.A02.2201171222 01/17/2022 [ 5590.803039] RIP: 0010:memcpy_erms+0x6/0x10 [ 5590.803045] Code: fe ff ff cc eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 fe [ 5590.803054] RSP: 0018:ffffc90003a8fdf0 EFLAGS: 00010282 [ 5590.803057] RAX: ffff888107ee9000 RBX: ffff888108cb1a00 RCX: 0000000000000f8f [ 5590.803061] RDX: 0000000000001000 RSI: ffffffffa0b0e000 RDI: ffff888107ee9071 [ 5590.803065] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 [ 5590.803069] R10: 0000000000000001 R11: 0000000000000002 R12: 0000000000000019 [ 5590.803073] R13: 0000000000174fff R14: 0000000000001000 R15: ffff888107ee9000 [ 5590.803077] FS: 00007f62a99bee80(0000) GS:ffff88849f880000(0000) knlGS:0000000000000000 [ 5590.803082] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5590.803085] CR2: ffffffffa0b0e000 CR3: 000000010a1a8004 CR4: 0000000000770ee0 [ 5590.803089] PKRU: 55555554 [ 5590.803091] Call Trace: [ 5590.803093] <TASK> [ 5590.803096] error_state_read+0xa1/0xd0 [i915] [ 5590.803175] kernfs_fop_read_iter+0xb2/0x1b0 [ 5590.803180] new_sync_read+0x116/0x1a0 [ 5590.803185] vfs_read+0x114/0x1b0 [ 5590.803189] ksys_read+0x63/0xe0 [ 5590.803193] do_syscall_64+0x38/0xc0 [ 5590.803197] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 5590.803201] RIP: 0033:0x7f62aaea5912 [ 5590.803204] Code: c0 e9 b2 fe ff ff 50 48 8d 3d 5a b9 0c 00 e8 05 19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 5590.803213] RSP: 002b:00007fff5b659ae8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 5590.803218] RAX: ffffffffffffffda RBX: 0000000000100000 RCX: 00007f62aaea5912 [ 5590.803221] RDX: 000000000008b000 RSI: 00007f62a8c4000f RDI: 0000000000000006 [ 5590.803225] RBP: 00007f62a8bcb00f R08: 0000000000200010 R09: 0000000000101000 [ 5590.803229] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000006 [ 5590.803233] R13: 0000000000075000 R14: 00007f62a8acb010 R15: 0000000000200000 [ 5590.803238] </TASK> [ 5590.803240] Modules linked in: i915 ttm drm_buddy drm_dp_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops prime_numbers nfnetlink br_netfilter overlay mei_pxp mei_hdcp x86_pkg_temp_thermal coretemp kvm_intel snd_hda_codec_hdmi snd_hda_intel ---truncated--- | ||||
| CVE-2022-49721 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64: ftrace: consistently handle PLTs. Sometimes it is necessary to use a PLT entry to call an ftrace trampoline. This is handled by ftrace_make_call() and ftrace_make_nop(), with each having *almost* identical logic, but this is not handled by ftrace_modify_call() since its introduction in commit: 3b23e4991fb66f6d ("arm64: implement ftrace with regs") Due to this, if we ever were to call ftrace_modify_call() for a callsite which requires a PLT entry for a trampoline, then either: a) If the old addr requires a trampoline, ftrace_modify_call() will use an out-of-range address to generate the 'old' branch instruction. This will result in warnings from aarch64_insn_gen_branch_imm() and ftrace_modify_code(), and no instructions will be modified. As ftrace_modify_call() will return an error, this will result in subsequent internal ftrace errors. b) If the old addr does not require a trampoline, but the new addr does, ftrace_modify_call() will use an out-of-range address to generate the 'new' branch instruction. This will result in warnings from aarch64_insn_gen_branch_imm(), and ftrace_modify_code() will replace the 'old' branch with a BRK. This will result in a kernel panic when this BRK is later executed. Practically speaking, case (a) is vastly more likely than case (b), and typically this will result in internal ftrace errors that don't necessarily affect the rest of the system. This can be demonstrated with an out-of-tree test module which triggers ftrace_modify_call(), e.g. | # insmod test_ftrace.ko | test_ftrace: Function test_function raw=0xffffb3749399201c, callsite=0xffffb37493992024 | branch_imm_common: offset out of range | branch_imm_common: offset out of range | ------------[ ftrace bug ]------------ | ftrace failed to modify | [<ffffb37493992024>] test_function+0x8/0x38 [test_ftrace] | actual: 1d:00:00:94 | Updating ftrace call site to call a different ftrace function | ftrace record flags: e0000002 | (2) R | expected tramp: ffffb374ae42ed54 | ------------[ cut here ]------------ | WARNING: CPU: 0 PID: 165 at kernel/trace/ftrace.c:2085 ftrace_bug+0x280/0x2b0 | Modules linked in: test_ftrace(+) | CPU: 0 PID: 165 Comm: insmod Not tainted 5.19.0-rc2-00002-g4d9ead8b45ce #13 | Hardware name: linux,dummy-virt (DT) | pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : ftrace_bug+0x280/0x2b0 | lr : ftrace_bug+0x280/0x2b0 | sp : ffff80000839ba00 | x29: ffff80000839ba00 x28: 0000000000000000 x27: ffff80000839bcf0 | x26: ffffb37493994180 x25: ffffb374b0991c28 x24: ffffb374b0d70000 | x23: 00000000ffffffea x22: ffffb374afcc33b0 x21: ffffb374b08f9cc8 | x20: ffff572b8462c000 x19: ffffb374b08f9000 x18: ffffffffffffffff | x17: 6c6c6163202c6331 x16: ffffb374ae5ad110 x15: ffffb374b0d51ee4 | x14: 0000000000000000 x13: 3435646532346561 x12: 3437336266666666 | x11: 203a706d61727420 x10: 6465746365707865 x9 : ffffb374ae5149e8 | x8 : 336266666666203a x7 : 706d617274206465 x6 : 00000000fffff167 | x5 : ffff572bffbc4a08 x4 : 00000000fffff167 x3 : 0000000000000000 | x2 : 0000000000000000 x1 : ffff572b84461e00 x0 : 0000000000000022 | Call trace: | ftrace_bug+0x280/0x2b0 | ftrace_replace_code+0x98/0xa0 | ftrace_modify_all_code+0xe0/0x144 | arch_ftrace_update_code+0x14/0x20 | ftrace_startup+0xf8/0x1b0 | register_ftrace_function+0x38/0x90 | test_ftrace_init+0xd0/0x1000 [test_ftrace] | do_one_initcall+0x50/0x2b0 | do_init_module+0x50/0x1f0 | load_module+0x17c8/0x1d64 | __do_sys_finit_module+0xa8/0x100 | __arm64_sys_finit_module+0x2c/0x3c | invoke_syscall+0x50/0x120 | el0_svc_common.constprop.0+0xdc/0x100 | do_el0_svc+0x3c/0xd0 | el0_svc+0x34/0xb0 | el0t_64_sync_handler+0xbc/0x140 | el0t_64_sync+0x18c/0x190 | ---[ end trace 0000000000000000 ]--- We can solve this by consistently determining whether to use a PLT entry for an address. Note that since (the earlier) commit: f1a54ae9 ---truncated--- | ||||
| CVE-2022-49716 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3: Fix error handling in gic_populate_ppi_partitions of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. When kcalloc fails, it missing of_node_put() and results in refcount leak. Fix this by goto out_put_node label. | ||||
| CVE-2022-49715 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3: Fix refcount leak in gic_populate_ppi_partitions of_find_node_by_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. | ||||
| CVE-2022-49710 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 6.0 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm mirror log: round up region bitmap size to BITS_PER_LONG The code in dm-log rounds up bitset_size to 32 bits. It then uses find_next_zero_bit_le on the allocated region. find_next_zero_bit_le accesses the bitmap using unsigned long pointers. So, on 64-bit architectures, it may access 4 bytes beyond the allocated size. Fix this bug by rounding up bitset_size to BITS_PER_LONG. This bug was found by running the lvm2 testsuite with kasan. | ||||
| CVE-2022-49707 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: add reserved GDT blocks check We capture a NULL pointer issue when resizing a corrupt ext4 image which is freshly clear resize_inode feature (not run e2fsck). It could be simply reproduced by following steps. The problem is because of the resize_inode feature was cleared, and it will convert the filesystem to meta_bg mode in ext4_resize_fs(), but the es->s_reserved_gdt_blocks was not reduced to zero, so could we mistakenly call reserve_backup_gdb() and passing an uninitialized resize_inode to it when adding new group descriptors. mkfs.ext4 /dev/sda 3G tune2fs -O ^resize_inode /dev/sda #forget to run requested e2fsck mount /dev/sda /mnt resize2fs /dev/sda 8G ======== BUG: kernel NULL pointer dereference, address: 0000000000000028 CPU: 19 PID: 3243 Comm: resize2fs Not tainted 5.18.0-rc7-00001-gfde086c5ebfd #748 ... RIP: 0010:ext4_flex_group_add+0xe08/0x2570 ... Call Trace: <TASK> ext4_resize_fs+0xbec/0x1660 __ext4_ioctl+0x1749/0x24e0 ext4_ioctl+0x12/0x20 __x64_sys_ioctl+0xa6/0x110 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f2dd739617b ======== The fix is simple, add a check in ext4_resize_begin() to make sure that the es->s_reserved_gdt_blocks is zero when the resize_inode feature is disabled. | ||||
| CVE-2022-49700 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/slub: add missing TID updates on slab deactivation The fastpath in slab_alloc_node() assumes that c->slab is stable as long as the TID stays the same. However, two places in __slab_alloc() currently don't update the TID when deactivating the CPU slab. If multiple operations race the right way, this could lead to an object getting lost; or, in an even more unlikely situation, it could even lead to an object being freed onto the wrong slab's freelist, messing up the `inuse` counter and eventually causing a page to be freed to the page allocator while it still contains slab objects. (I haven't actually tested these cases though, this is just based on looking at the code. Writing testcases for this stuff seems like it'd be a pain...) The race leading to state inconsistency is (all operations on the same CPU and kmem_cache): - task A: begin do_slab_free(): - read TID - read pcpu freelist (==NULL) - check `slab == c->slab` (true) - [PREEMPT A->B] - task B: begin slab_alloc_node(): - fastpath fails (`c->freelist` is NULL) - enter __slab_alloc() - slub_get_cpu_ptr() (disables preemption) - enter ___slab_alloc() - take local_lock_irqsave() - read c->freelist as NULL - get_freelist() returns NULL - write `c->slab = NULL` - drop local_unlock_irqrestore() - goto new_slab - slub_percpu_partial() is NULL - get_partial() returns NULL - slub_put_cpu_ptr() (enables preemption) - [PREEMPT B->A] - task A: finish do_slab_free(): - this_cpu_cmpxchg_double() succeeds() - [CORRUPT STATE: c->slab==NULL, c->freelist!=NULL] From there, the object on c->freelist will get lost if task B is allowed to continue from here: It will proceed to the retry_load_slab label, set c->slab, then jump to load_freelist, which clobbers c->freelist. But if we instead continue as follows, we get worse corruption: - task A: run __slab_free() on object from other struct slab: - CPU_PARTIAL_FREE case (slab was on no list, is now on pcpu partial) - task A: run slab_alloc_node() with NUMA node constraint: - fastpath fails (c->slab is NULL) - call __slab_alloc() - slub_get_cpu_ptr() (disables preemption) - enter ___slab_alloc() - c->slab is NULL: goto new_slab - slub_percpu_partial() is non-NULL - set c->slab to slub_percpu_partial(c) - [CORRUPT STATE: c->slab points to slab-1, c->freelist has objects from slab-2] - goto redo - node_match() fails - goto deactivate_slab - existing c->freelist is passed into deactivate_slab() - inuse count of slab-1 is decremented to account for object from slab-2 At this point, the inuse count of slab-1 is 1 lower than it should be. This means that if we free all allocated objects in slab-1 except for one, SLUB will think that slab-1 is completely unused, and may free its page, leading to use-after-free. | ||||
| CVE-2022-49699 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: filemap: Handle sibling entries in filemap_get_read_batch() If a read races with an invalidation followed by another read, it is possible for a folio to be replaced with a higher-order folio. If that happens, we'll see a sibling entry for the new folio in the next iteration of the loop. This manifests as a NULL pointer dereference while holding the RCU read lock. Handle this by simply returning. The next call will find the new folio and handle it correctly. The other ways of handling this rare race are more complex and it's just not worth it. | ||||
| CVE-2022-49698 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: use get_random_u32 instead of prandom bh might occur while updating per-cpu rnd_state from user context, ie. local_out path. BUG: using smp_processor_id() in preemptible [00000000] code: nginx/2725 caller is nft_ng_random_eval+0x24/0x54 [nft_numgen] Call Trace: check_preemption_disabled+0xde/0xe0 nft_ng_random_eval+0x24/0x54 [nft_numgen] Use the random driver instead, this also avoids need for local prandom state. Moreover, prandom now uses the random driver since d4150779e60f ("random32: use real rng for non-deterministic randomness"). Based on earlier patch from Pablo Neira. | ||||
| CVE-2022-49697 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix request_sock leak in sk lookup helpers A customer reported a request_socket leak in a Calico cloud environment. We found that a BPF program was doing a socket lookup with takes a refcnt on the socket and that it was finding the request_socket but returning the parent LISTEN socket via sk_to_full_sk() without decrementing the child request socket 1st, resulting in request_sock slab object leak. This patch retains the existing behaviour of returning full socks to the caller but it also decrements the child request_socket if one is present before doing so to prevent the leak. Thanks to Curtis Taylor for all the help in diagnosing and testing this. And thanks to Antoine Tenart for the reproducer and patch input. v2 of this patch contains, refactor as per Daniel Borkmann's suggestions to validate RCU flags on the listen socket so that it balances with bpf_sk_release() and update comments as per Martin KaFai Lau's suggestion. One small change to Daniels suggestion, put "sk = sk2" under "if (sk2 != sk)" to avoid an extra instruction. | ||||
| CVE-2022-49695 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: igb: fix a use-after-free issue in igb_clean_tx_ring Fix the following use-after-free bug in igb_clean_tx_ring routine when the NIC is running in XDP mode. The issue can be triggered redirecting traffic into the igb NIC and then closing the device while the traffic is flowing. [ 73.322719] CPU: 1 PID: 487 Comm: xdp_redirect Not tainted 5.18.3-apu2 #9 [ 73.330639] Hardware name: PC Engines APU2/APU2, BIOS 4.0.7 02/28/2017 [ 73.337434] RIP: 0010:refcount_warn_saturate+0xa7/0xf0 [ 73.362283] RSP: 0018:ffffc9000081f798 EFLAGS: 00010282 [ 73.367761] RAX: 0000000000000000 RBX: ffffc90000420f80 RCX: 0000000000000000 [ 73.375200] RDX: ffff88811ad22d00 RSI: ffff88811ad171e0 RDI: ffff88811ad171e0 [ 73.382590] RBP: 0000000000000900 R08: ffffffff82298f28 R09: 0000000000000058 [ 73.390008] R10: 0000000000000219 R11: ffffffff82280f40 R12: 0000000000000090 [ 73.397356] R13: ffff888102343a40 R14: ffff88810359e0e4 R15: 0000000000000000 [ 73.404806] FS: 00007ff38d31d740(0000) GS:ffff88811ad00000(0000) knlGS:0000000000000000 [ 73.413129] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 73.419096] CR2: 000055cff35f13f8 CR3: 0000000106391000 CR4: 00000000000406e0 [ 73.426565] Call Trace: [ 73.429087] <TASK> [ 73.431314] igb_clean_tx_ring+0x43/0x140 [igb] [ 73.436002] igb_down+0x1d7/0x220 [igb] [ 73.439974] __igb_close+0x3c/0x120 [igb] [ 73.444118] igb_xdp+0x10c/0x150 [igb] [ 73.447983] ? igb_pci_sriov_configure+0x70/0x70 [igb] [ 73.453362] dev_xdp_install+0xda/0x110 [ 73.457371] dev_xdp_attach+0x1da/0x550 [ 73.461369] do_setlink+0xfd0/0x10f0 [ 73.465166] ? __nla_validate_parse+0x89/0xc70 [ 73.469714] rtnl_setlink+0x11a/0x1e0 [ 73.473547] rtnetlink_rcv_msg+0x145/0x3d0 [ 73.477709] ? rtnl_calcit.isra.0+0x130/0x130 [ 73.482258] netlink_rcv_skb+0x8d/0x110 [ 73.486229] netlink_unicast+0x230/0x340 [ 73.490317] netlink_sendmsg+0x215/0x470 [ 73.494395] __sys_sendto+0x179/0x190 [ 73.498268] ? move_addr_to_user+0x37/0x70 [ 73.502547] ? __sys_getsockname+0x84/0xe0 [ 73.506853] ? netlink_setsockopt+0x1c1/0x4a0 [ 73.511349] ? __sys_setsockopt+0xc8/0x1d0 [ 73.515636] __x64_sys_sendto+0x20/0x30 [ 73.519603] do_syscall_64+0x3b/0x80 [ 73.523399] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 73.528712] RIP: 0033:0x7ff38d41f20c [ 73.551866] RSP: 002b:00007fff3b945a68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 73.559640] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff38d41f20c [ 73.567066] RDX: 0000000000000034 RSI: 00007fff3b945b30 RDI: 0000000000000003 [ 73.574457] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 [ 73.581852] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff3b945ab0 [ 73.589179] R13: 0000000000000000 R14: 0000000000000003 R15: 00007fff3b945b30 [ 73.596545] </TASK> [ 73.598842] ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2022-49691 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: erspan: do not assume transport header is always set Rewrite tests in ip6erspan_tunnel_xmit() and erspan_fb_xmit() to not assume transport header is set. syzbot reported: WARNING: CPU: 0 PID: 1350 at include/linux/skbuff.h:2911 skb_transport_header include/linux/skbuff.h:2911 [inline] WARNING: CPU: 0 PID: 1350 at include/linux/skbuff.h:2911 ip6erspan_tunnel_xmit+0x15af/0x2eb0 net/ipv6/ip6_gre.c:963 Modules linked in: CPU: 0 PID: 1350 Comm: aoe_tx0 Not tainted 5.19.0-rc2-syzkaller-00160-g274295c6e53f #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 RIP: 0010:skb_transport_header include/linux/skbuff.h:2911 [inline] RIP: 0010:ip6erspan_tunnel_xmit+0x15af/0x2eb0 net/ipv6/ip6_gre.c:963 Code: 0f 47 f0 40 88 b5 7f fe ff ff e8 8c 16 4b f9 89 de bf ff ff ff ff e8 a0 12 4b f9 66 83 fb ff 0f 85 1d f1 ff ff e8 71 16 4b f9 <0f> 0b e9 43 f0 ff ff e8 65 16 4b f9 48 8d 85 30 ff ff ff ba 60 00 RSP: 0018:ffffc90005daf910 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 000000000000ffff RCX: 0000000000000000 RDX: ffff88801f032100 RSI: ffffffff882e8d3f RDI: 0000000000000003 RBP: ffffc90005dafab8 R08: 0000000000000003 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000000 R12: ffff888024f21d40 R13: 000000000000a288 R14: 00000000000000b0 R15: ffff888025a2e000 FS: 0000000000000000(0000) GS:ffff88802c800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2e425000 CR3: 000000006d099000 CR4: 0000000000152ef0 Call Trace: <TASK> __netdev_start_xmit include/linux/netdevice.h:4805 [inline] netdev_start_xmit include/linux/netdevice.h:4819 [inline] xmit_one net/core/dev.c:3588 [inline] dev_hard_start_xmit+0x188/0x880 net/core/dev.c:3604 sch_direct_xmit+0x19f/0xbe0 net/sched/sch_generic.c:342 __dev_xmit_skb net/core/dev.c:3815 [inline] __dev_queue_xmit+0x14a1/0x3900 net/core/dev.c:4219 dev_queue_xmit include/linux/netdevice.h:2994 [inline] tx+0x6a/0xc0 drivers/block/aoe/aoenet.c:63 kthread+0x1e7/0x3b0 drivers/block/aoe/aoecmd.c:1229 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302 </TASK> | ||||
| CVE-2022-49687 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: virtio_net: fix xdp_rxq_info bug after suspend/resume The following sequence currently causes a driver bug warning when using virtio_net: # ip link set eth0 up # echo mem > /sys/power/state (or e.g. # rtcwake -s 10 -m mem) <resume> # ip link set eth0 down Missing register, driver bug WARNING: CPU: 0 PID: 375 at net/core/xdp.c:138 xdp_rxq_info_unreg+0x58/0x60 Call trace: xdp_rxq_info_unreg+0x58/0x60 virtnet_close+0x58/0xac __dev_close_many+0xac/0x140 __dev_change_flags+0xd8/0x210 dev_change_flags+0x24/0x64 do_setlink+0x230/0xdd0 ... This happens because virtnet_freeze() frees the receive_queue completely (including struct xdp_rxq_info) but does not call xdp_rxq_info_unreg(). Similarly, virtnet_restore() sets up the receive_queue again but does not call xdp_rxq_info_reg(). Actually, parts of virtnet_freeze_down() and virtnet_restore_up() are almost identical to virtnet_close() and virtnet_open(): only the calls to xdp_rxq_info_(un)reg() are missing. This means that we can fix this easily and avoid such problems in the future by just calling virtnet_close()/open() from the freeze/restore handlers. Aside from adding the missing xdp_rxq_info calls the only difference is that the refill work is only cancelled if netif_running(). However, this should not make any functional difference since the refill work should only be active if the network interface is actually up. | ||||
| CVE-2022-49675 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tick/nohz: unexport __init-annotated tick_nohz_full_setup() EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it had been broken for a decade. Commit 28438794aba4 ("modpost: fix section mismatch check for exported init/exit sections") fixed it so modpost started to warn it again, then this showed up: MODPOST vmlinux.symvers WARNING: modpost: vmlinux.o(___ksymtab_gpl+tick_nohz_full_setup+0x0): Section mismatch in reference from the variable __ksymtab_tick_nohz_full_setup to the function .init.text:tick_nohz_full_setup() The symbol tick_nohz_full_setup is exported and annotated __init Fix this by removing the __init annotation of tick_nohz_full_setup or drop the export. Drop the export because tick_nohz_full_setup() is only called from the built-in code in kernel/sched/isolation.c. | ||||
| CVE-2022-49673 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: dm raid: fix KASAN warning in raid5_add_disks There's a KASAN warning in raid5_add_disk when running the LVM testsuite. The warning happens in the test lvconvert-raid-reshape-linear_to_raid6-single-type.sh. We fix the warning by verifying that rdev->saved_raid_disk is within limits. | ||||
| CVE-2022-49671 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/cm: Fix memory leak in ib_cm_insert_listen cm_alloc_id_priv() allocates resource for the cm_id_priv. When cm_init_listen() fails it doesn't free it, leading to memory leak. Add the missing error unwind. | ||||
| CVE-2022-49669 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix race on unaccepted mptcp sockets When the listener socket owning the relevant request is closed, it frees the unaccepted subflows and that causes later deletion of the paired MPTCP sockets. The mptcp socket's worker can run in the time interval between such delete operations. When that happens, any access to msk->first will cause an UaF access, as the subflow cleanup did not cleared such field in the mptcp socket. Address the issue explicitly traversing the listener socket accept queue at close time and performing the needed cleanup on the pending msk. Note that the locking is a bit tricky, as we need to acquire the msk socket lock, while still owning the subflow socket one. | ||||
| CVE-2022-49663 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tunnels: do not assume mac header is set in skb_tunnel_check_pmtu() Recently added debug in commit f9aefd6b2aa3 ("net: warn if mac header was not set") caught a bug in skb_tunnel_check_pmtu(), as shown in this syzbot report [1]. In ndo_start_xmit() paths, there is really no need to use skb->mac_header, because skb->data is supposed to point at it. [1] WARNING: CPU: 1 PID: 8604 at include/linux/skbuff.h:2784 skb_mac_header_len include/linux/skbuff.h:2784 [inline] WARNING: CPU: 1 PID: 8604 at include/linux/skbuff.h:2784 skb_tunnel_check_pmtu+0x5de/0x2f90 net/ipv4/ip_tunnel_core.c:413 Modules linked in: CPU: 1 PID: 8604 Comm: syz-executor.3 Not tainted 5.19.0-rc2-syzkaller-00443-g8720bd951b8e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:skb_mac_header_len include/linux/skbuff.h:2784 [inline] RIP: 0010:skb_tunnel_check_pmtu+0x5de/0x2f90 net/ipv4/ip_tunnel_core.c:413 Code: 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 80 3c 02 00 0f 84 b9 fe ff ff 4c 89 ff e8 7c 0f d7 f9 e9 ac fe ff ff e8 c2 13 8a f9 <0f> 0b e9 28 fc ff ff e8 b6 13 8a f9 48 8b 54 24 70 48 b8 00 00 00 RSP: 0018:ffffc90002e4f520 EFLAGS: 00010212 RAX: 0000000000000324 RBX: ffff88804d5fd500 RCX: ffffc90005b52000 RDX: 0000000000040000 RSI: ffffffff87f05e3e RDI: 0000000000000003 RBP: ffffc90002e4f650 R08: 0000000000000003 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000000 R12: 000000000000ffff R13: 0000000000000000 R14: 000000000000ffcd R15: 000000000000001f FS: 00007f3babba9700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000080 CR3: 0000000075319000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> geneve_xmit_skb drivers/net/geneve.c:927 [inline] geneve_xmit+0xcf8/0x35d0 drivers/net/geneve.c:1107 __netdev_start_xmit include/linux/netdevice.h:4805 [inline] netdev_start_xmit include/linux/netdevice.h:4819 [inline] __dev_direct_xmit+0x500/0x730 net/core/dev.c:4309 dev_direct_xmit include/linux/netdevice.h:3007 [inline] packet_direct_xmit+0x1b8/0x2c0 net/packet/af_packet.c:282 packet_snd net/packet/af_packet.c:3073 [inline] packet_sendmsg+0x21f4/0x55d0 net/packet/af_packet.c:3104 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2489 ___sys_sendmsg+0xf3/0x170 net/socket.c:2543 __sys_sendmsg net/socket.c:2572 [inline] __do_sys_sendmsg net/socket.c:2581 [inline] __se_sys_sendmsg net/socket.c:2579 [inline] __x64_sys_sendmsg+0x132/0x220 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f3baaa89109 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f3babba9168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f3baab9bf60 RCX: 00007f3baaa89109 RDX: 0000000000000000 RSI: 0000000020000a00 RDI: 0000000000000003 RBP: 00007f3baaae305d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffe74f2543f R14: 00007f3babba9300 R15: 0000000000022000 </TASK> | ||||
| CVE-2022-49659 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: m_can: m_can_{read_fifo,echo_tx_event}(): shift timestamp to full 32 bits In commit 1be37d3b0414 ("can: m_can: fix periph RX path: use rx-offload to ensure skbs are sent from softirq context") the RX path for peripheral devices was switched to RX-offload. Received CAN frames are pushed to RX-offload together with a timestamp. RX-offload is designed to handle overflows of the timestamp correctly, if 32 bit timestamps are provided. The timestamps of m_can core are only 16 bits wide. So this patch shifts them to full 32 bit before passing them to RX-offload. | ||||