Total
547 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43351 | 1 Linux | 1 Linux Kernel | 2026-05-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Eagerly init vgic dist/redist on vgic creation If vgic_allocate_private_irqs_locked() fails for any odd reason, we exit kvm_vgic_create() early, leaving dist->rd_regions uninitialised. kvm_vgic_dist_destroy() then comes along and walks into the weeds trying to free the RDs. Got to love this stuff. Solve it by moving all the static initialisation early, and make sure that if we fail halfway, we're in a reasonable shape to perform the rest of the teardown. While at it, reset the vgic model on failure, just in case... | ||||
| CVE-2026-43349 | 1 Linux | 1 Linux Kernel | 2026-05-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid uninit-value access in f2fs_sanity_check_node_footer syzbot reported a f2fs bug as below: BUG: KMSAN: uninit-value in f2fs_sanity_check_node_footer+0x374/0xa20 fs/f2fs/node.c:1520 f2fs_sanity_check_node_footer+0x374/0xa20 fs/f2fs/node.c:1520 f2fs_finish_read_bio+0xe1e/0x1d60 fs/f2fs/data.c:177 f2fs_read_end_io+0x6ab/0x2220 fs/f2fs/data.c:-1 bio_endio+0x1006/0x1160 block/bio.c:1792 submit_bio_noacct+0x533/0x2960 block/blk-core.c:891 submit_bio+0x57a/0x620 block/blk-core.c:926 blk_crypto_submit_bio include/linux/blk-crypto.h:203 [inline] f2fs_submit_read_bio+0x12c/0x360 fs/f2fs/data.c:557 f2fs_submit_page_bio+0xee2/0x1450 fs/f2fs/data.c:775 read_node_folio+0x384/0x4b0 fs/f2fs/node.c:1481 __get_node_folio+0x5db/0x15d0 fs/f2fs/node.c:1576 f2fs_get_inode_folio+0x40/0x50 fs/f2fs/node.c:1623 do_read_inode fs/f2fs/inode.c:425 [inline] f2fs_iget+0x1209/0x9380 fs/f2fs/inode.c:596 f2fs_fill_super+0x8f5a/0xb2e0 fs/f2fs/super.c:5184 get_tree_bdev_flags+0x6e6/0x920 fs/super.c:1694 get_tree_bdev+0x38/0x50 fs/super.c:1717 f2fs_get_tree+0x35/0x40 fs/f2fs/super.c:5436 vfs_get_tree+0xb3/0x5d0 fs/super.c:1754 fc_mount fs/namespace.c:1193 [inline] do_new_mount_fc fs/namespace.c:3763 [inline] do_new_mount+0x885/0x1dd0 fs/namespace.c:3839 path_mount+0x7a2/0x20b0 fs/namespace.c:4159 do_mount fs/namespace.c:4172 [inline] __do_sys_mount fs/namespace.c:4361 [inline] __se_sys_mount+0x704/0x7f0 fs/namespace.c:4338 __x64_sys_mount+0xe4/0x150 fs/namespace.c:4338 x64_sys_call+0x39f0/0x3ea0 arch/x86/include/generated/asm/syscalls_64.h:166 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x134/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f The root cause is: in f2fs_finish_read_bio(), we may access uninit data in folio if we failed to read the data from device into folio, let's add a check condition to avoid such issue. | ||||
| CVE-2026-43312 | 1 Linux | 1 Linux Kernel | 2026-05-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: i2c: ov5647: Initialize subdev before controls In ov5647_init_controls() we call v4l2_get_subdevdata, but it is initialized by v4l2_i2c_subdev_init() in the probe, which currently happens after init_controls(). This can result in a segfault if the error condition is hit, and we try to access i2c_client, so fix the order. | ||||
| CVE-2026-43140 | 1 Linux | 1 Linux Kernel | 2026-05-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: Do not crash on missing msc->input Fake USB devices can send their own report descriptors for which the input_mapping() hook does not get called. In this case, msc->input stays NULL, leading to a crash at a later time. Detect this condition in the input_configured() hook and reject the device. This is not supposed to happen with actual magic mouse devices, but can be provoked by imposing as a magic mouse USB device. | ||||
| CVE-2026-43152 | 1 Linux | 1 Linux Kernel | 2026-05-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: hid-pl: handle probe errors Errors in init must be reported back or we'll follow a NULL pointer the first time FF is used. | ||||
| CVE-2025-71294 | 1 Linux | 1 Linux Kernel | 2026-05-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix NULL pointer issue buffer funcs If SDMA block not enabled, buffer_funcs will not initialize, fix the null pointer issue if buffer_funcs not initialized. | ||||
| CVE-2026-31790 | 1 Openssl | 1 Openssl | 2026-05-12 | 7.5 High |
| Issue summary: Applications using RSASVE key encapsulation to establish a secret encryption key can send contents of an uninitialized memory buffer to a malicious peer. Impact summary: The uninitialized buffer might contain sensitive data from the previous execution of the application process which leads to sensitive data leakage to an attacker. RSA_public_encrypt() returns the number of bytes written on success and -1 on error. The affected code tests only whether the return value is non-zero. As a result, if RSA encryption fails, encapsulation can still return success to the caller, set the output lengths, and leave the caller to use the contents of the ciphertext buffer as if a valid KEM ciphertext had been produced. If applications use EVP_PKEY_encapsulate() with RSA/RSASVE on an attacker-supplied invalid RSA public key without first validating that key, then this may cause stale or uninitialized contents of the caller-provided ciphertext buffer to be disclosed to the attacker in place of the KEM ciphertext. As a workaround calling EVP_PKEY_public_check() or EVP_PKEY_public_check_quick() before EVP_PKEY_encapsulate() will mitigate the issue. The FIPS modules in 3.6, 3.5, 3.4, 3.3, 3.1 and 3.0 are affected by this issue. | ||||
| CVE-2026-44411 | 1 Siemens | 1 Solid Edge Se2026 | 2026-05-12 | 7.8 High |
| A vulnerability has been identified in Solid Edge SE2026 (All versions < V226.0 Update 5). The affected application is vulnerable to uninitialized pointer access while parsing specially crafted PAR files. An attacker could leverage this vulnerability to execute code in the context of the current process. | ||||
| CVE-2024-49938 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-05-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k_htc: Use __skb_set_length() for resetting urb before resubmit Syzbot points out that skb_trim() has a sanity check on the existing length of the skb, which can be uninitialised in some error paths. The intent here is clearly just to reset the length to zero before resubmitting, so switch to calling __skb_set_length(skb, 0) directly. In addition, __skb_set_length() already contains a call to skb_reset_tail_pointer(), so remove the redundant call. The syzbot report came from ath9k_hif_usb_reg_in_cb(), but there's a similar usage of skb_trim() in ath9k_hif_usb_rx_cb(), change both while we're at it. | ||||
| CVE-2026-43271 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md-cluster: fix NULL pointer dereference in process_metadata_update The function process_metadata_update() blindly dereferences the 'thread' pointer (acquired via rcu_dereference_protected) within the wait_event() macro. While the code comment states "daemon thread must exist", there is a valid race condition window during the MD array startup sequence (md_run): 1. bitmap_load() is called, which invokes md_cluster_ops->join(). 2. join() starts the "cluster_recv" thread (recv_daemon). 3. At this point, recv_daemon is active and processing messages. 4. However, mddev->thread (the main MD thread) is not initialized until later in md_run(). If a METADATA_UPDATED message is received from a remote node during this specific window, process_metadata_update() will be called while mddev->thread is still NULL, leading to a kernel panic. To fix this, we must validate the 'thread' pointer. If it is NULL, we release the held lock (no_new_dev_lockres) and return early, safely ignoring the update request as the array is not yet fully ready to process it. | ||||
| CVE-2026-43013 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: lag: Check for LAG device before creating debugfs __mlx5_lag_dev_add_mdev() may return 0 (success) even when an error occurs that is handled gracefully. Consequently, the initialization flow proceeds to call mlx5_ldev_add_debugfs() even when there is no valid LAG context. mlx5_ldev_add_debugfs() blindly created the debugfs directory and attributes. This exposed interfaces (like the members file) that rely on a valid ldev pointer, leading to potential NULL pointer dereferences if accessed when ldev is NULL. Add a check to verify that mlx5_lag_dev(dev) returns a valid pointer before attempting to create the debugfs entries. | ||||
| CVE-2026-31443 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix crash when the event log is disabled If reporting errors to the event log is not supported by the hardware, and an error that causes Function Level Reset (FLR) is received, the driver will try to restore the event log even if it was not allocated. Also, only try to free the event log if it was properly allocated. | ||||
| CVE-2026-31749 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: comedi: ni_atmio16d: Fix invalid clean-up after failed attach If the driver's COMEDI "attach" handler function (`atmio16d_attach()`) returns an error, the COMEDI core will call the driver's "detach" handler function (`atmio16d_detach()`) to clean up. This calls `reset_atmio16d()` unconditionally, but depending on where the error occurred in the attach handler, the device may not have been sufficiently initialized to call `reset_atmio16d()`. It uses `dev->iobase` as the I/O port base address and `dev->private` as the pointer to the COMEDI device's private data structure. `dev->iobase` may still be set to its initial value of 0, which would result in undesired writes to low I/O port addresses. `dev->private` may still be `NULL`, which would result in null pointer dereferences. Fix `atmio16d_detach()` by checking that `dev->private` is valid (non-null) before calling `reset_atmio16d()`. This implies that `dev->iobase` was set correctly since that is set up before `dev->private`. | ||||
| CVE-2026-8020 | 1 Google | 2 Android, Chrome | 2026-05-07 | 5.3 Medium |
| Uninitialized Use in GPU in Google Chrome on Android prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to obtain potentially sensitive information from process memory via a crafted HTML page. (Chromium security severity: Low) | ||||
| CVE-2026-7955 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-05-07 | 5.3 Medium |
| Uninitialized Use in GPU in Google Chrome prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to obtain potentially sensitive information from process memory via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-7924 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-05-07 | 6.5 Medium |
| Uninitialized Use in Dawn in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to obtain potentially sensitive information from process memory via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-7982 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-05-07 | 6.5 Medium |
| Uninitialized Use in WebCodecs in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to obtain potentially sensitive information from process memory via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-31689 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: EDAC/mc: Fix error path ordering in edac_mc_alloc() When the mci->pvt_info allocation in edac_mc_alloc() fails, the error path will call put_device() which will end up calling the device's release function. However, the init ordering is wrong such that device_initialize() happens *after* the failed allocation and thus the device itself and the release function pointer are not initialized yet when they're called: MCE: In-kernel MCE decoding enabled. ------------[ cut here ]------------ kobject: '(null)': is not initialized, yet kobject_put() is being called. WARNING: lib/kobject.c:734 at kobject_put, CPU#22: systemd-udevd CPU: 22 UID: 0 PID: 538 Comm: systemd-udevd Not tainted 7.0.0-rc1+ #2 PREEMPT(full) RIP: 0010:kobject_put Call Trace: <TASK> edac_mc_alloc+0xbe/0xe0 [edac_core] amd64_edac_init+0x7a4/0xff0 [amd64_edac] ? __pfx_amd64_edac_init+0x10/0x10 [amd64_edac] do_one_initcall ... Reorder the calling sequence so that the device is initialized and thus the release function pointer is properly set before it can be used. This was found by Claude while reviewing another EDAC patch. | ||||
| CVE-2026-6870 | 1 Wireshark | 1 Wireshark | 2026-05-02 | 5.5 Medium |
| GSM RP protocol dissector crash in Wireshark 4.6.0 to 4.6.4 and 4.4.0 to 4.4.14 allows denial of service | ||||
| CVE-2026-6524 | 1 Wireshark | 1 Wireshark | 2026-05-01 | 5.5 Medium |
| MySQL protocol dissector crash in Wireshark 4.6.0 to 4.6.4 and 4.4.0 to 4.4.14 allows denial of service | ||||