Filtered by vendor Linux
Subscriptions
Total
10450 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-42237 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Validate payload length before processing block Move the payload length check in cs_dsp_load() and cs_dsp_coeff_load() to be done before the block is processed. The check that the length of a block payload does not exceed the number of remaining bytes in the firwmware file buffer was being done near the end of the loop iteration. However, some code before that check used the length field without validating it. | ||||
| CVE-2024-42236 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: configfs: Prevent OOB read/write in usb_string_copy() Userspace provided string 's' could trivially have the length zero. Left unchecked this will firstly result in an OOB read in the form `if (str[0 - 1] == '\n') followed closely by an OOB write in the form `str[0 - 1] = '\0'`. There is already a validating check to catch strings that are too long. Let's supply an additional check for invalid strings that are too short. | ||||
| CVE-2024-42235 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/mm: Add NULL pointer check to crst_table_free() base_crst_free() crst_table_free() used to work with NULL pointers before the conversion to ptdescs. Since crst_table_free() can be called with a NULL pointer (error handling in crst_table_upgrade() add an explicit check. Also add the same check to base_crst_free() for consistency reasons. In real life this should not happen, since order two GFP_KERNEL allocations will not fail, unless FAIL_PAGE_ALLOC is enabled and used. | ||||
| CVE-2024-42234 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: fix crashes from deferred split racing folio migration Even on 6.10-rc6, I've been seeing elusive "Bad page state"s (often on flags when freeing, yet the flags shown are not bad: PG_locked had been set and cleared??), and VM_BUG_ON_PAGE(page_ref_count(page) == 0)s from deferred_split_scan()'s folio_put(), and a variety of other BUG and WARN symptoms implying double free by deferred split and large folio migration. 6.7 commit 9bcef5973e31 ("mm: memcg: fix split queue list crash when large folio migration") was right to fix the memcg-dependent locking broken in 85ce2c517ade ("memcontrol: only transfer the memcg data for migration"), but missed a subtlety of deferred_split_scan(): it moves folios to its own local list to work on them without split_queue_lock, during which time folio->_deferred_list is not empty, but even the "right" lock does nothing to secure the folio and the list it is on. Fortunately, deferred_split_scan() is careful to use folio_try_get(): so folio_migrate_mapping() can avoid the race by folio_undo_large_rmappable() while the old folio's reference count is temporarily frozen to 0 - adding such a freeze in the !mapping case too (originally, folio lock and unmapping and no swap cache left an anon folio unreachable, so no freezing was needed there: but the deferred split queue offers a way to reach it). | ||||
| CVE-2024-42233 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: filemap: replace pte_offset_map() with pte_offset_map_nolock() The vmf->ptl in filemap_fault_recheck_pte_none() is still set from handle_pte_fault(). But at the same time, we did a pte_unmap(vmf->pte). After a pte_unmap(vmf->pte) unmap and rcu_read_unlock(), the page table may be racily changed and vmf->ptl maybe fails to protect the actual page table. Fix this by replacing pte_offset_map() with pte_offset_map_nolock(). As David said, the PTL pointer might be stale so if we continue to use it infilemap_fault_recheck_pte_none(), it might trigger UAF. Also, if the PTL fails, the issue fixed by commit 58f327f2ce80 ("filemap: avoid unnecessary major faults in filemap_fault()") might reappear. | ||||
| CVE-2024-42232 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: libceph: fix race between delayed_work() and ceph_monc_stop() The way the delayed work is handled in ceph_monc_stop() is prone to races with mon_fault() and possibly also finish_hunting(). Both of these can requeue the delayed work which wouldn't be canceled by any of the following code in case that happens after cancel_delayed_work_sync() runs -- __close_session() doesn't mess with the delayed work in order to avoid interfering with the hunting interval logic. This part was missed in commit b5d91704f53e ("libceph: behave in mon_fault() if cur_mon < 0") and use-after-free can still ensue on monc and objects that hang off of it, with monc->auth and monc->monmap being particularly susceptible to quickly being reused. To fix this: - clear monc->cur_mon and monc->hunting as part of closing the session in ceph_monc_stop() - bail from delayed_work() if monc->cur_mon is cleared, similar to how it's done in mon_fault() and finish_hunting() (based on monc->hunting) - call cancel_delayed_work_sync() after the session is closed | ||||
| CVE-2024-42231 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix calc_available_free_space() for zoned mode calc_available_free_space() returns the total size of metadata (or system) block groups, which can be allocated from unallocated disk space. The logic is wrong on zoned mode in two places. First, the calculation of data_chunk_size is wrong. We always allocate one zone as one chunk, and no partial allocation of a zone. So, we should use zone_size (= data_sinfo->chunk_size) as it is. Second, the result "avail" may not be zone aligned. Since we always allocate one zone as one chunk on zoned mode, returning non-zone size aligned bytes will result in less pressure on the async metadata reclaim process. This is serious for the nearly full state with a large zone size device. Allowing over-commit too much will result in less async reclaim work and end up in ENOSPC. We can align down to the zone size to avoid that. | ||||
| CVE-2024-42230 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: Fix scv instruction crash with kexec kexec on pseries disables AIL (reloc_on_exc), required for scv instruction support, before other CPUs have been shut down. This means they can execute scv instructions after AIL is disabled, which causes an interrupt at an unexpected entry location that crashes the kernel. Change the kexec sequence to disable AIL after other CPUs have been brought down. As a refresher, the real-mode scv interrupt vector is 0x17000, and the fixed-location head code probably couldn't easily deal with implementing such high addresses so it was just decided not to support that interrupt at all. | ||||
| CVE-2024-42229 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: aead,cipher - zeroize key buffer after use I.G 9.7.B for FIPS 140-3 specifies that variables temporarily holding cryptographic information should be zeroized once they are no longer needed. Accomplish this by using kfree_sensitive for buffers that previously held the private key. | ||||
| CVE-2024-42228 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Using uninitialized value *size when calling amdgpu_vce_cs_reloc Initialize the size before calling amdgpu_vce_cs_reloc, such as case 0x03000001. V2: To really improve the handling we would actually need to have a separate value of 0xffffffff.(Christian) | ||||
| CVE-2024-42227 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix overlapping copy within dml_core_mode_programming [WHY] &mode_lib->mp.Watermark and &locals->Watermark are the same address. memcpy may lead to unexpected behavior. [HOW] memmove should be used. | ||||
| CVE-2024-42225 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: replace skb_put with skb_put_zero Avoid potentially reusing uninitialized data | ||||
| CVE-2024-42158 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/pkey: Use kfree_sensitive() to fix Coccinelle warnings Replace memzero_explicit() and kfree() with kfree_sensitive() to fix warnings reported by Coccinelle: WARNING opportunity for kfree_sensitive/kvfree_sensitive (line 1506) WARNING opportunity for kfree_sensitive/kvfree_sensitive (line 1643) WARNING opportunity for kfree_sensitive/kvfree_sensitive (line 1770) | ||||
| CVE-2024-42157 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/pkey: Wipe sensitive data on failure Wipe sensitive data from stack also if the copy_to_user() fails. | ||||
| CVE-2024-42155 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 1.9 Low |
| In the Linux kernel, the following vulnerability has been resolved: s390/pkey: Wipe copies of protected- and secure-keys Although the clear-key of neither protected- nor secure-keys is accessible, this key material should only be visible to the calling process. So wipe all copies of protected- or secure-keys from stack, even in case of an error. | ||||
| CVE-2024-42154 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tcp_metrics: validate source addr length I don't see anything checking that TCP_METRICS_ATTR_SADDR_IPV4 is at least 4 bytes long, and the policy doesn't have an entry for this attribute at all (neither does it for IPv6 but v6 is manually validated). | ||||
| CVE-2024-42153 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr When del_timer_sync() is called in an interrupt context it throws a warning because of potential deadlock. The timer is used only to exit from wait_for_completion() after a timeout so replacing the call with wait_for_completion_timeout() allows to remove the problematic timer and its related functions altogether. | ||||
| CVE-2024-42151 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: mark bpf_dummy_struct_ops.test_1 parameter as nullable Test case dummy_st_ops/dummy_init_ret_value passes NULL as the first parameter of the test_1() function. Mark this parameter as nullable to make verifier aware of such possibility. Otherwise, NULL check in the test_1() code: SEC("struct_ops/test_1") int BPF_PROG(test_1, struct bpf_dummy_ops_state *state) { if (!state) return ...; ... access state ... } Might be removed by verifier, thus triggering NULL pointer dereference under certain conditions. | ||||
| CVE-2024-42149 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs: don't misleadingly warn during thaw operations The block device may have been frozen before it was claimed by a filesystem. Concurrently another process might try to mount that frozen block device and has temporarily claimed the block device for that purpose causing a concurrent fs_bdev_thaw() to end up here. The mounter is already about to abort mounting because they still saw an elevanted bdev->bd_fsfreeze_count so get_bdev_super() will return NULL in that case. For example, P1 calls dm_suspend() which calls into bdev_freeze() before the block device has been claimed by the filesystem. This brings bdev->bd_fsfreeze_count to 1 and no call into fs_bdev_freeze() is required. Now P2 tries to mount that frozen block device. It claims it and checks bdev->bd_fsfreeze_count. As it's elevated it aborts mounting. In the meantime P3 called dm_resume(). P3 sees that the block device is already claimed by a filesystem and calls into fs_bdev_thaw(). P3 takes a passive reference and realizes that the filesystem isn't ready yet. P3 puts itself to sleep to wait for the filesystem to become ready. P2 now puts the last active reference to the filesystem and marks it as dying. P3 gets woken, sees that the filesystem is dying and get_bdev_super() fails. | ||||
| CVE-2024-42148 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bnx2x: Fix multiple UBSAN array-index-out-of-bounds Fix UBSAN warnings that occur when using a system with 32 physical cpu cores or more, or when the user defines a number of Ethernet queues greater than or equal to FP_SB_MAX_E1x using the num_queues module parameter. Currently there is a read/write out of bounds that occurs on the array "struct stats_query_entry query" present inside the "bnx2x_fw_stats_req" struct in "drivers/net/ethernet/broadcom/bnx2x/bnx2x.h". Looking at the definition of the "struct stats_query_entry query" array: struct stats_query_entry query[FP_SB_MAX_E1x+ BNX2X_FIRST_QUEUE_QUERY_IDX]; FP_SB_MAX_E1x is defined as the maximum number of fast path interrupts and has a value of 16, while BNX2X_FIRST_QUEUE_QUERY_IDX has a value of 3 meaning the array has a total size of 19. Since accesses to "struct stats_query_entry query" are offset-ted by BNX2X_FIRST_QUEUE_QUERY_IDX, that means that the total number of Ethernet queues should not exceed FP_SB_MAX_E1x (16). However one of these queues is reserved for FCOE and thus the number of Ethernet queues should be set to [FP_SB_MAX_E1x -1] (15) if FCOE is enabled or [FP_SB_MAX_E1x] (16) if it is not. This is also described in a comment in the source code in drivers/net/ethernet/broadcom/bnx2x/bnx2x.h just above the Macro definition of FP_SB_MAX_E1x. Below is the part of this explanation that it important for this patch /* * The total number of L2 queues, MSIX vectors and HW contexts (CIDs) is * control by the number of fast-path status blocks supported by the * device (HW/FW). Each fast-path status block (FP-SB) aka non-default * status block represents an independent interrupts context that can * serve a regular L2 networking queue. However special L2 queues such * as the FCoE queue do not require a FP-SB and other components like * the CNIC may consume FP-SB reducing the number of possible L2 queues * * If the maximum number of FP-SB available is X then: * a. If CNIC is supported it consumes 1 FP-SB thus the max number of * regular L2 queues is Y=X-1 * b. In MF mode the actual number of L2 queues is Y= (X-1/MF_factor) * c. If the FCoE L2 queue is supported the actual number of L2 queues * is Y+1 * d. The number of irqs (MSIX vectors) is either Y+1 (one extra for * slow-path interrupts) or Y+2 if CNIC is supported (one additional * FP interrupt context for the CNIC). * e. The number of HW context (CID count) is always X or X+1 if FCoE * L2 queue is supported. The cid for the FCoE L2 queue is always X. */ However this driver also supports NICs that use the E2 controller which can handle more queues due to having more FP-SB represented by FP_SB_MAX_E2. Looking at the commits when the E2 support was added, it was originally using the E1x parameters: commit f2e0899f0f27 ("bnx2x: Add 57712 support"). Back then FP_SB_MAX_E2 was set to 16 the same as E1x. However the driver was later updated to take full advantage of the E2 instead of having it be limited to the capabilities of the E1x. But as far as we can tell, the array "stats_query_entry query" was still limited to using the FP-SB available to the E1x cards as part of an oversignt when the driver was updated to take full advantage of the E2, and now with the driver being aware of the greater queue size supported by E2 NICs, it causes the UBSAN warnings seen in the stack traces below. This patch increases the size of the "stats_query_entry query" array by replacing FP_SB_MAX_E1x with FP_SB_MAX_E2 to be large enough to handle both types of NICs. Stack traces: UBSAN: array-index-out-of-bounds in drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c:1529:11 index 20 is out of range for type 'stats_query_entry [19]' CPU: 12 PID: 858 Comm: systemd-network Not tainted 6.9.0-060900rc7-generic #202405052133 Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 ---truncated--- | ||||