Filtered by vendor Redhat
Subscriptions
Filtered by product Enterprise Linux
Subscriptions
Total
15507 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-49097 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: NFS: Avoid writeback threads getting stuck in mempool_alloc() In a low memory situation, allow the NFS writeback code to fail without getting stuck in infinite loops in mempool_alloc(). | ||||
| CVE-2024-35952 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/ast: Fix soft lockup There is a while-loop in ast_dp_set_on_off() that could lead to infinite-loop. This is because the register, VGACRI-Dx, checked in this API is a scratch register actually controlled by a MCU, named DPMCU, in BMC. These scratch registers are protected by scu-lock. If suc-lock is not off, DPMCU can not update these registers and then host will have soft lockup due to never updated status. DPMCU is used to control DP and relative registers to handshake with host's VGA driver. Even the most time-consuming task, DP's link training, is less than 100ms. 200ms should be enough. | ||||
| CVE-2022-25883 | 2 Npmjs, Redhat | 10 Semver, Acm, Enterprise Linux and 7 more | 2025-09-23 | 5.3 Medium |
| Versions of the package semver before 7.5.2 are vulnerable to Regular Expression Denial of Service (ReDoS) via the function new Range, when untrusted user data is provided as a range. | ||||
| CVE-2024-35912 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-09-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: rfi: fix potential response leaks If the rx payload length check fails, or if kmemdup() fails, we still need to free the command response. Fix that. | ||||
| CVE-2024-35911 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix memory corruption bug with suspend and rebuild The ice driver would previously panic after suspend. This is caused from the driver *only* calling the ice_vsi_free_q_vectors() function by itself, when it is suspending. Since commit b3e7b3a6ee92 ("ice: prevent NULL pointer deref during reload") the driver has zeroed out num_q_vectors, and only restored it in ice_vsi_cfg_def(). This further causes the ice_rebuild() function to allocate a zero length buffer, after which num_q_vectors is updated, and then the new value of num_q_vectors is used to index into the zero length buffer, which corrupts memory. The fix entails making sure all the code referencing num_q_vectors only does so after it has been reset via ice_vsi_cfg_def(). I didn't perform a full bisect, but I was able to test against 6.1.77 kernel and that ice driver works fine for suspend/resume with no panic, so sometime since then, this problem was introduced. Also clean up an un-needed init of a local variable in the function being modified. PANIC from 6.8.0-rc1: [1026674.915596] PM: suspend exit [1026675.664697] ice 0000:17:00.1: PTP reset successful [1026675.664707] ice 0000:17:00.1: 2755 msecs passed between update to cached PHC time [1026675.667660] ice 0000:b1:00.0: PTP reset successful [1026675.675944] ice 0000:b1:00.0: 2832 msecs passed between update to cached PHC time [1026677.137733] ixgbe 0000:31:00.0 ens787: NIC Link is Up 1 Gbps, Flow Control: None [1026677.190201] BUG: kernel NULL pointer dereference, address: 0000000000000010 [1026677.192753] ice 0000:17:00.0: PTP reset successful [1026677.192764] ice 0000:17:00.0: 4548 msecs passed between update to cached PHC time [1026677.197928] #PF: supervisor read access in kernel mode [1026677.197933] #PF: error_code(0x0000) - not-present page [1026677.197937] PGD 1557a7067 P4D 0 [1026677.212133] ice 0000:b1:00.1: PTP reset successful [1026677.212143] ice 0000:b1:00.1: 4344 msecs passed between update to cached PHC time [1026677.212575] [1026677.243142] Oops: 0000 [#1] PREEMPT SMP NOPTI [1026677.247918] CPU: 23 PID: 42790 Comm: kworker/23:0 Kdump: loaded Tainted: G W 6.8.0-rc1+ #1 [1026677.257989] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C620.86B.01.01.0005.2202160810 02/16/2022 [1026677.269367] Workqueue: ice ice_service_task [ice] [1026677.274592] RIP: 0010:ice_vsi_rebuild_set_coalesce+0x130/0x1e0 [ice] [1026677.281421] Code: 0f 84 3a ff ff ff 41 0f b7 74 ec 02 66 89 b0 22 02 00 00 81 e6 ff 1f 00 00 e8 ec fd ff ff e9 35 ff ff ff 48 8b 43 30 49 63 ed <41> 0f b7 34 24 41 83 c5 01 48 8b 3c e8 66 89 b7 aa 02 00 00 81 e6 [1026677.300877] RSP: 0018:ff3be62a6399bcc0 EFLAGS: 00010202 [1026677.306556] RAX: ff28691e28980828 RBX: ff28691e41099828 RCX: 0000000000188000 [1026677.314148] RDX: 0000000000000000 RSI: 0000000000000010 RDI: ff28691e41099828 [1026677.321730] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [1026677.329311] R10: 0000000000000007 R11: ffffffffffffffc0 R12: 0000000000000010 [1026677.336896] R13: 0000000000000000 R14: 0000000000000000 R15: ff28691e0eaa81a0 [1026677.344472] FS: 0000000000000000(0000) GS:ff28693cbffc0000(0000) knlGS:0000000000000000 [1026677.353000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1026677.359195] CR2: 0000000000000010 CR3: 0000000128df4001 CR4: 0000000000771ef0 [1026677.366779] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1026677.374369] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1026677.381952] PKRU: 55555554 [1026677.385116] Call Trace: [1026677.388023] <TASK> [1026677.390589] ? __die+0x20/0x70 [1026677.394105] ? page_fault_oops+0x82/0x160 [1026677.398576] ? do_user_addr_fault+0x65/0x6a0 [1026677.403307] ? exc_page_fault+0x6a/0x150 [1026677.407694] ? asm_exc_page_fault+0x22/0x30 [1026677.412349] ? ice_vsi_rebuild_set_coalesce+0x130/0x1e0 [ice] [1026677.4186 ---truncated--- | ||||
| CVE-2022-49160 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix crash during module load unload test During purex packet handling the driver was incorrectly freeing a pre-allocated structure. Fix this by skipping that entry. System crashed with the following stack during a module unload test. Call Trace: sbitmap_init_node+0x7f/0x1e0 sbitmap_queue_init_node+0x24/0x150 blk_mq_init_bitmaps+0x3d/0xa0 blk_mq_init_tags+0x68/0x90 blk_mq_alloc_map_and_rqs+0x44/0x120 blk_mq_alloc_set_map_and_rqs+0x63/0x150 blk_mq_alloc_tag_set+0x11b/0x230 scsi_add_host_with_dma.cold+0x3f/0x245 qla2x00_probe_one+0xd5a/0x1b80 [qla2xxx] Call Trace with slub_debug and debug kernel: kasan_report_invalid_free+0x50/0x80 __kasan_slab_free+0x137/0x150 slab_free_freelist_hook+0xc6/0x190 kfree+0xe8/0x2e0 qla2x00_free_device+0x3bb/0x5d0 [qla2xxx] qla2x00_remove_one+0x668/0xcf0 [qla2xxx] | ||||
| CVE-2022-49158 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix warning message due to adisc being flushed Fix warning message due to adisc being flushed. Linux kernel triggered a warning message where a different error code type is not matching up with the expected type. Add additional translation of one error code type to another. WARNING: CPU: 2 PID: 1131623 at drivers/scsi/qla2xxx/qla_init.c:498 qla2x00_async_adisc_sp_done+0x294/0x2b0 [qla2xxx] CPU: 2 PID: 1131623 Comm: drmgr Not tainted 5.13.0-rc1-autotest #1 .. GPR28: c000000aaa9c8890 c0080000079ab678 c00000140a104800 c00000002bd19000 NIP [c00800000790857c] qla2x00_async_adisc_sp_done+0x294/0x2b0 [qla2xxx] LR [c008000007908578] qla2x00_async_adisc_sp_done+0x290/0x2b0 [qla2xxx] Call Trace: [c00000001cdc3620] [c008000007908578] qla2x00_async_adisc_sp_done+0x290/0x2b0 [qla2xxx] (unreliable) [c00000001cdc3710] [c0080000078f3080] __qla2x00_abort_all_cmds+0x1b8/0x580 [qla2xxx] [c00000001cdc3840] [c0080000078f589c] qla2x00_abort_all_cmds+0x34/0xd0 [qla2xxx] [c00000001cdc3880] [c0080000079153d8] qla2x00_abort_isp_cleanup+0x3f0/0x570 [qla2xxx] [c00000001cdc3920] [c0080000078fb7e8] qla2x00_remove_one+0x3d0/0x480 [qla2xxx] [c00000001cdc39b0] [c00000000071c274] pci_device_remove+0x64/0x120 [c00000001cdc39f0] [c0000000007fb818] device_release_driver_internal+0x168/0x2a0 [c00000001cdc3a30] [c00000000070e304] pci_stop_bus_device+0xb4/0x100 [c00000001cdc3a70] [c00000000070e4f0] pci_stop_and_remove_bus_device+0x20/0x40 [c00000001cdc3aa0] [c000000000073940] pci_hp_remove_devices+0x90/0x130 [c00000001cdc3b30] [c0080000070704d0] disable_slot+0x38/0x90 [rpaphp] [ c00000001cdc3b60] [c00000000073eb4c] power_write_file+0xcc/0x180 [c00000001cdc3be0] [c0000000007354bc] pci_slot_attr_store+0x3c/0x60 [c00000001cdc3c00] [c00000000055f820] sysfs_kf_write+0x60/0x80 [c00000001cdc3c20] [c00000000055df10] kernfs_fop_write_iter+0x1a0/0x290 [c00000001cdc3c70] [c000000000447c4c] new_sync_write+0x14c/0x1d0 [c00000001cdc3d10] [c00000000044b134] vfs_write+0x224/0x330 [c00000001cdc3d60] [c00000000044b3f4] ksys_write+0x74/0x130 [c00000001cdc3db0] [c00000000002df70] system_call_exception+0x150/0x2d0 [c00000001cdc3e10] [c00000000000d45c] system_call_common+0xec/0x278 | ||||
| CVE-2022-49145 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-23 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: CPPC: Avoid out of bounds access when parsing _CPC data If the NumEntries field in the _CPC return package is less than 2, do not attempt to access the "Revision" element of that package, because it may not be present then. BugLink: https://lore.kernel.org/lkml/20220322143534.GC32582@xsang-OptiPlex-9020/ | ||||
| CVE-2022-49197 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: af_netlink: Fix shift out of bounds in group mask calculation When a netlink message is received, netlink_recvmsg() fills in the address of the sender. One of the fields is the 32-bit bitfield nl_groups, which carries the multicast group on which the message was received. The least significant bit corresponds to group 1, and therefore the highest group that the field can represent is 32. Above that, the UB sanitizer flags the out-of-bounds shift attempts. Which bits end up being set in such case is implementation defined, but it's either going to be a wrong non-zero value, or zero, which is at least not misleading. Make the latter choice deterministic by always setting to 0 for higher-numbered multicast groups. To get information about membership in groups >= 32, userspace is expected to use nl_pktinfo control messages[0], which are enabled by NETLINK_PKTINFO socket option. [0] https://lwn.net/Articles/147608/ The way to trigger this issue is e.g. through monitoring the BRVLAN group: # bridge monitor vlan & # ip link add name br type bridge Which produces the following citation: UBSAN: shift-out-of-bounds in net/netlink/af_netlink.c:162:19 shift exponent 32 is too large for 32-bit type 'int' | ||||
| CVE-2024-7341 | 1 Redhat | 8 Build Keycloak, Build Of Keycloak, Enterprise Linux and 5 more | 2025-09-23 | 7.1 High |
| A session fixation issue was discovered in the SAML adapters provided by Keycloak. The session ID and JSESSIONID cookie are not changed at login time, even when the turnOffChangeSessionIdOnLogin option is configured. This flaw allows an attacker who hijacks the current session before authentication to trigger session fixation. | ||||
| CVE-2024-4629 | 1 Redhat | 12 Build Keycloak, Build Of Keycloak, Enterprise Linux and 9 more | 2025-09-23 | 6.5 Medium |
| A vulnerability was found in Keycloak. This flaw allows attackers to bypass brute force protection by exploiting the timing of login attempts. By initiating multiple login requests simultaneously, attackers can exceed the configured limits for failed attempts before the system locks them out. This timing loophole enables attackers to make more guesses at passwords than intended, potentially compromising account security on affected systems. | ||||
| CVE-2022-49228 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a btf decl_tag bug when tagging a function syzbot reported a btf decl_tag bug with stack trace below: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 3592 Comm: syz-executor914 Not tainted 5.16.0-syzkaller-11424-gb7892f7d5cb2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:btf_type_vlen include/linux/btf.h:231 [inline] RIP: 0010:btf_decl_tag_resolve+0x83e/0xaa0 kernel/bpf/btf.c:3910 ... Call Trace: <TASK> btf_resolve+0x251/0x1020 kernel/bpf/btf.c:4198 btf_check_all_types kernel/bpf/btf.c:4239 [inline] btf_parse_type_sec kernel/bpf/btf.c:4280 [inline] btf_parse kernel/bpf/btf.c:4513 [inline] btf_new_fd+0x19fe/0x2370 kernel/bpf/btf.c:6047 bpf_btf_load kernel/bpf/syscall.c:4039 [inline] __sys_bpf+0x1cbb/0x5970 kernel/bpf/syscall.c:4679 __do_sys_bpf kernel/bpf/syscall.c:4738 [inline] __se_sys_bpf kernel/bpf/syscall.c:4736 [inline] __x64_sys_bpf+0x75/0xb0 kernel/bpf/syscall.c:4736 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae The kasan error is triggered with an illegal BTF like below: type 0: void type 1: int type 2: decl_tag to func type 3 type 3: func to func_proto type 8 The total number of types is 4 and the type 3 is illegal since its func_proto type is out of range. Currently, the target type of decl_tag can be struct/union, var or func. Both struct/union and var implemented their own 'resolve' callback functions and hence handled properly in kernel. But func type doesn't have 'resolve' callback function. When btf_decl_tag_resolve() tries to check func type, it tries to get vlen of its func_proto type, which triggered the above kasan error. To fix the issue, btf_decl_tag_resolve() needs to do btf_func_check() before trying to accessing func_proto type. In the current implementation, func type is checked with btf_func_check() in the main checking function btf_check_all_types(). To fix the above kasan issue, let us implement 'resolve' callback func type properly. The 'resolve' callback will be also called in btf_check_all_types() for func types. | ||||
| CVE-2022-49214 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/64s: Don't use DSISR for SLB faults Since commit 46ddcb3950a2 ("powerpc/mm: Show if a bad page fault on data is read or write.") we use page_fault_is_write(regs->dsisr) in __bad_page_fault() to determine if the fault is for a read or write, and change the message printed accordingly. But SLB faults, aka Data Segment Interrupts, don't set DSISR (Data Storage Interrupt Status Register) to a useful value. All ISA versions from v2.03 through v3.1 specify that the Data Segment Interrupt sets DSISR "to an undefined value". As far as I can see there's no mention of SLB faults setting DSISR in any BookIV content either. This manifests as accesses that should be a read being incorrectly reported as writes, for example, using the xmon "dump" command: 0:mon> d 0x5deadbeef0000000 5deadbeef0000000 [359526.415354][ C6] BUG: Unable to handle kernel data access on write at 0x5deadbeef0000000 [359526.415611][ C6] Faulting instruction address: 0xc00000000010a300 cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf400] pc: c00000000010a300: mread+0x90/0x190 If we disassemble the PC, we see a load instruction: 0:mon> di c00000000010a300 c00000000010a300 89490000 lbz r10,0(r9) We can also see in exceptions-64s.S that the data_access_slb block doesn't set IDSISR=1, which means it doesn't load DSISR into pt_regs. So the value we're using to determine if the fault is a read/write is some stale value in pt_regs from a previous page fault. Rework the printing logic to separate the SLB fault case out, and only print read/write in the cases where we can determine it. The result looks like eg: 0:mon> d 0x5deadbeef0000000 5deadbeef0000000 [ 721.779525][ C6] BUG: Unable to handle kernel data access at 0x5deadbeef0000000 [ 721.779697][ C6] Faulting instruction address: 0xc00000000014cbe0 cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf390] 0:mon> d 0 0000000000000000 [ 742.793242][ C6] BUG: Kernel NULL pointer dereference at 0x00000000 [ 742.793316][ C6] Faulting instruction address: 0xc00000000014cbe0 cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf390] | ||||
| CVE-2022-49205 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix double uncharge the mem of sk_msg If tcp_bpf_sendmsg is running during a tear down operation, psock may be freed. tcp_bpf_sendmsg() tcp_bpf_send_verdict() sk_msg_return() tcp_bpf_sendmsg_redir() unlikely(!psock)) sk_msg_free() The mem of msg has been uncharged in tcp_bpf_send_verdict() by sk_msg_return(), and would be uncharged by sk_msg_free() again. When psock is null, we can simply returning an error code, this would then trigger the sk_msg_free_nocharge in the error path of __SK_REDIRECT and would have the side effect of throwing an error up to user space. This would be a slight change in behavior from user side but would look the same as an error if the redirect on the socket threw an error. This issue can cause the following info: WARNING: CPU: 0 PID: 2136 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260 Call Trace: <TASK> __sk_destruct+0x24/0x1f0 sk_psock_destroy+0x19b/0x1c0 process_one_work+0x1b3/0x3c0 worker_thread+0x30/0x350 ? process_one_work+0x3c0/0x3c0 kthread+0xe6/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> | ||||
| CVE-2022-49257 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: watch_queue: Fix NULL dereference in error cleanup In watch_queue_set_size(), the error cleanup code doesn't take account of the fact that __free_page() can't handle a NULL pointer when trying to free up buffer pages that did get allocated. Fix this by only calling __free_page() on the pages actually allocated. Without the fix, this can lead to something like the following: BUG: KASAN: null-ptr-deref in __free_pages+0x1f/0x1b0 mm/page_alloc.c:5473 Read of size 4 at addr 0000000000000034 by task syz-executor168/3599 ... Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 __kasan_report mm/kasan/report.c:446 [inline] kasan_report.cold+0x66/0xdf mm/kasan/report.c:459 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x13d/0x180 mm/kasan/generic.c:189 instrument_atomic_read include/linux/instrumented.h:71 [inline] atomic_read include/linux/atomic/atomic-instrumented.h:27 [inline] page_ref_count include/linux/page_ref.h:67 [inline] put_page_testzero include/linux/mm.h:717 [inline] __free_pages+0x1f/0x1b0 mm/page_alloc.c:5473 watch_queue_set_size+0x499/0x630 kernel/watch_queue.c:275 pipe_ioctl+0xac/0x2b0 fs/pipe.c:632 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae | ||||
| CVE-2022-49256 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: watch_queue: Actually free the watch free_watch() does everything barring actually freeing the watch object. Fix this by adding the missing kfree. kmemleak produces a report something like the following. Note that as an address can be seen in the first word, the watch would appear to have gone through call_rcu(). BUG: memory leak unreferenced object 0xffff88810ce4a200 (size 96): comm "syz-executor352", pid 3605, jiffies 4294947473 (age 13.720s) hex dump (first 32 bytes): e0 82 48 0d 81 88 ff ff 00 00 00 00 00 00 00 00 ..H............. 80 a2 e4 0c 81 88 ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8214e6cc>] kmalloc include/linux/slab.h:581 [inline] [<ffffffff8214e6cc>] kzalloc include/linux/slab.h:714 [inline] [<ffffffff8214e6cc>] keyctl_watch_key+0xec/0x2e0 security/keys/keyctl.c:1800 [<ffffffff8214ec84>] __do_sys_keyctl+0x3c4/0x490 security/keys/keyctl.c:2016 [<ffffffff84493a25>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff84493a25>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84600068>] entry_SYSCALL_64_after_hwframe+0x44/0xae | ||||
| CVE-2022-49253 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: usb: go7007: s2250-board: fix leak in probe() Call i2c_unregister_device(audio) on this error path. | ||||
| CVE-2022-49325 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tcp: add accessors to read/set tp->snd_cwnd We had various bugs over the years with code breaking the assumption that tp->snd_cwnd is greater than zero. Lately, syzbot reported the WARN_ON_ONCE(!tp->prior_cwnd) added in commit 8b8a321ff72c ("tcp: fix zero cwnd in tcp_cwnd_reduction") can trigger, and without a repro we would have to spend considerable time finding the bug. Instead of complaining too late, we want to catch where and when tp->snd_cwnd is set to an illegal value. | ||||
| CVE-2022-49283 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firmware: sysfb: fix platform-device leak in error path Make sure to free the platform device also in the unlikely event that registration fails. | ||||
| CVE-2022-49272 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Fix potential AB/BA lock with buffer_mutex and mmap_lock syzbot caught a potential deadlock between the PCM runtime->buffer_mutex and the mm->mmap_lock. It was brought by the recent fix to cover the racy read/write and other ioctls, and in that commit, I overlooked a (hopefully only) corner case that may take the revert lock, namely, the OSS mmap. The OSS mmap operation exceptionally allows to re-configure the parameters inside the OSS mmap syscall, where mm->mmap_mutex is already held. Meanwhile, the copy_from/to_user calls at read/write operations also take the mm->mmap_lock internally, hence it may lead to a AB/BA deadlock. A similar problem was already seen in the past and we fixed it with a refcount (in commit b248371628aa). The former fix covered only the call paths with OSS read/write and OSS ioctls, while we need to cover the concurrent access via both ALSA and OSS APIs now. This patch addresses the problem above by replacing the buffer_mutex lock in the read/write operations with a refcount similar as we've used for OSS. The new field, runtime->buffer_accessing, keeps the number of concurrent read/write operations. Unlike the former buffer_mutex protection, this protects only around the copy_from/to_user() calls; the other codes are basically protected by the PCM stream lock. The refcount can be a negative, meaning blocked by the ioctls. If a negative value is seen, the read/write aborts with -EBUSY. In the ioctl side, OTOH, they check this refcount, too, and set to a negative value for blocking unless it's already being accessed. | ||||