Total
845 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-67855 | 1 Open62541 | 1 Open62541 | 2026-08-05 | 7.5 High |
| open62541 contains a heap use-after-free in the GDS PushManagement certificate update workflow when UA_ENABLE_GDS_PUSHMANAGEMENT is enabled. This allows a remote attacker to cause a denial of service. | ||||
| CVE-2026-64438 | 1 Linux | 1 Linux Kernel | 2026-08-05 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat - fix VF2PF work teardown race in adf_disable_sriov() The VF2PF interrupt handler queues PF-side response work that stores a raw pointer to per-VF state (struct adf_accel_vf_info). Currently, adf_disable_sriov() destroys per-VF mutexes and frees vf_info without stopping new VF2PF work or waiting for in-flight workers to complete. A concurrently scheduled or already queued worker can then dereference freed memory. This manifests as a use-after-free when KASAN is enabled: BUG: KASAN: null-ptr-deref in mutex_lock+0x76/0xe0 Write of size 8 at addr 0000000000000260 by task kworker/24:2/... Workqueue: qat_pf2vf_resp_wq adf_iov_send_resp [intel_qat] Call Trace: kasan_report+0x119/0x140 mutex_lock+0x76/0xe0 adf_gen4_pfvf_send+0xd4/0x1f0 [intel_qat] adf_recv_and_handle_vf2pf_msg+0x290/0x360 [intel_qat] adf_iov_send_resp+0x8c/0xe0 [intel_qat] process_one_work+0x6ac/0xfd0 worker_thread+0x4dd/0xd30 kthread+0x326/0x410 ret_from_fork+0x33b/0x670 Add a PF-local flag, vf2pf_disabled, that gates work queueing, worker processing, and interrupt re-enabling during teardown. Set this flag atomically with the hardware interrupt mask inside adf_disable_all_vf2pf_interrupts(). After masking, synchronize the AE cluster MSI-X interrupt and flush the PF response workqueue before tearing down per-VF locks and state so all in-flight work completes before vf_info is destroyed. Introduce adf_enable_all_vf2pf_interrupts() to clear the flag and unmask all VF2PF interrupts under the same lock when SR-IOV is re-enabled. This ensures the software flag and hardware state transition atomically on both the enable and disable paths. | ||||
| CVE-2026-6100 | 1 Python | 1 Cpython | 2026-08-05 | 8.1 High |
| Use-after-free (UAF) was possible in the `lzma.LZMADecompressor`, `bz2.BZ2Decompressor`, and `gzip.GzipFile` when a memory allocation fails with a `MemoryError` and the decompression instance is re-used. This scenario can be triggered if the process is under memory pressure. The fix cleans up the dangling pointer in this specific error condition. The vulnerability is only present if the program re-uses decompressor instances across multiple decompression calls even after a `MemoryError` is raised during decompression. Using the helper functions to one-shot decompress data such as `lzma.decompress()`, `bz2.decompress()`, `gzip.decompress()`, and `zlib.decompress()` are not affected as a new decompressor instance is used per call. If the decompressor instance is not re-used after an error condition, this usage is similarly not vulnerable. | ||||
| CVE-2026-64462 | 1 Linux | 1 Linux Kernel | 2026-08-05 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: PCI: altera: Fix resource leaks on probe failure The chained IRQ handler is set during probe, but is only removed during the driver remove(). If pci_host_probe() fails, the handler and INTx IRQ domain remain set even though the devm-managed host bridge storage containing struct altera_pcie will be released, leaving the handler with a stale data pointer. Interrupts are also enabled before pci_host_probe() is called. If probe fails after that point, the controller interrupt source should be disabled before the chained handler and INTx domain are removed. So set the chained handler only after the INTx domain has been created. Disable controller interrupts during IRQ teardown, and tear the IRQ setup down if pci_host_probe() fails. [mani: commit log] | ||||
| CVE-2026-64221 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: ti-qspi: fix use-after-free after DMA setup failure The driver falls back to PIO mode if DMA setup fails during probe. Make sure to clear the DMA channel pointer also if buffer allocation fails to avoid passing a pointer to the released channel to the DMA engine (or trying to free the channel a second time on late probe errors or driver unbind). This issue was flagged by Sashiko when reviewing a devres allocation conversion patch. | ||||
| CVE-2026-64311 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: loongson - Remove broken and unused loongson-rng The loongson-rng rng_alg has several vulnerabilities, including not providing forward security, and a use-after-free bug due to the use of wait_for_completion_interruptible(). Meanwhile, the rng_alg framework doesn't really have any purpose in the first place other than to access the software algorithms crypto/drbg.c and crypto/jitterentropy.c. Hardware-specific rng_algs have no in-kernel user, and unlike hwrng there's no feed into the actual Linux RNG. As such, there's really no point to this code. There are of course other rng_alg drivers that are similarly unused, but they're similarly in the process of being phased out, e.g. https://lore.kernel.org/r/20260529193648.18172-1-ebiggers@kernel.org and https://lore.kernel.org/r/20260529220430.34135-1-ebiggers@kernel.org Given that, there's no point in fixing forward these vulnerabilities, and it makes much more sense to simply roll back the addition of this driver. If this platform provides TRNG (not PRNG) functionality, it could make sense to add a hwrng driver, but it would be quite different. | ||||
| CVE-2026-64341 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: iowarrior: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked") | ||||
| CVE-2024-40937 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: gve: Clear napi->skb before dev_kfree_skb_any() gve_rx_free_skb incorrectly leaves napi->skb referencing an skb after it is freed with dev_kfree_skb_any(). This can result in a subsequent call to napi_get_frags returning a dangling pointer. Fix this by clearing napi->skb before the skb is freed. | ||||
| CVE-2026-64561 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Check for invalid/obsolete root *after* making MMU pages available Check for a "stale" page fault, i.e. for an invalid and/or obsolete root, after making MMU pages available for the shadow MMU. If reclaiming shadow pages zaps an in-use root, i.e. marks it invalid, then KVM will attempt to map memory into an invalid root. On its own, populating an invalid root is "fine", but because child shadow pages inherit their parent's role, any children created during the map/fetch will be created as invalid pages, thus violating KVM's invariant that invalid pages are never on the list of active MMU pages. Note, the underlying flaw has existed since KVM first started tracking invalid roots in 2008 (commit 2e53d63acba7, "KVM: MMU: ignore zapped root pagetables"), but the true badness only came along in 2020 (Linux 5.9) with the invariant that invalid shadow pages can't be on the list of active pages. Note #2, inheriting role.invalid when creating child shadow pages is also far from ideal; that flaw will be addressed separately. | ||||
| CVE-2026-64218 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: fix report_work leak on backbone_gw purge batadv_bla_purge_backbone_gw() removes stale backbone gateway entries, but fails to properly handle their associated report_work: - If report_work is running, the purge must wait for it to finish before freeing the backbone_gw, otherwise the worker may access freed memory (e.g. bat_priv). - If report_work is pending, the purge must cancel it and release the reference held for that pending work item. The previous implementation called hlist_for_each_entry_safe() inside a spin_lock_bh() section, but cancel_work_sync() may sleep and therefore cannot be called from within a spinlock-protected region. Restructure the loop to handle one entry per spinlock critical section: acquire the lock, find the next entry to purge, remove it from the hash list, then release the lock before calling cancel_work_sync() and dropping the hash_entry reference. Repeat until no more entries require purging. | ||||
| CVE-2026-64245 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: modedb: fix a possible UAF in fb_find_mode() If mode_option is NULL, it is assigned from mode_option_buf: if (!mode_option) { fb_get_options(NULL, &mode_option_buf); mode_option = mode_option_buf; } Later, name is assigned from mode_option: const char *name = mode_option; However, mode_option_buf is freed before name is no longer used: kfree(mode_option_buf); while name is still accessed by: if ((name_matches(db[i], name, namelen) || Since name aliases mode_option_buf, this may result in a use-after-free. Fix this by extending the lifetime of mode_option_buf until the end of the function by using scope-based resource management for cleanup. | ||||
| CVE-2026-64396 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix UAF of struct file_lock in SMB2_LOCK deferred-lock cancellation When a blocking byte-range lock request is deferred in the FILE_LOCK_DEFERRED path, ksmbd registers the asynchronous work into the connection's async_requests list via setup_async_work(). The cancel callback smb2_remove_blocked_lock() holds a reference to the flock. If the lock waiter is subsequently woken up but the work state is no longer KSMBD_WORK_ACTIVE (e.g., due to a concurrent cancellation), the cleanup path calls locks_free_lock(flock) without dequeuing the work from the async_requests list. Concurrently, smb2_cancel() walks the list under conn->request_lock and invokes the cancel callback, which then dereferences the already freed 'flock'. This leads to a slab-use-after-free inside __wake_up_common. Fix this by restructuring the cleanup logic after the worker returns from ksmbd_vfs_posix_lock_wait(). Move list_del(&smb_lock->llist) and release_async_work(work) to the top of the cleanup block. This guarantees that the async work is completely dequeued and serialized under conn->request_lock before locks_free_lock(flock) is called, rendering the flock unreachable for any concurrent smb2_cancel(). | ||||
| CVE-2026-64421 | 1 Linux | 1 Linux Kernel | 2026-08-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: Fix use-after-free on remove KASAN reports a slab-use-after-free in __media_entity_remove_link() during rmmod of imx8_isi: BUG: KASAN: slab-use-after-free in __media_entity_remove_link+0x608/0x650 Read of size 2 at addr ffff0000d47cb02a by task rmmod/724 Call trace: __media_entity_remove_link+0x608/0x650 __media_entity_remove_links+0x78/0x144 __media_device_unregister_entity+0x150/0x280 media_device_unregister_entity+0x48/0x68 v4l2_device_unregister_subdev+0x158/0x300 v4l2_async_unbind_subdev_one+0x22c/0x358 v4l2_async_nf_unbind_all_subdevs+0xfc/0x1c0 v4l2_async_nf_unregister+0x5c/0x14c mxc_isi_remove+0x124/0x2a0 [imx8_isi] Allocated by task 249: __kmalloc_noprof+0x27c/0x690 mxc_isi_crossbar_init+0x22c/0x560 [imx8_isi] Freed by task 724: kfree+0x1e4/0x5b0 mxc_isi_crossbar_cleanup+0x34/0x80 [imx8_isi] mxc_isi_remove+0x11c/0x2a0 [imx8_isi] The problem is that mxc_isi_remove() calls mxc_isi_crossbar_cleanup() before mxc_isi_v4l2_cleanup(). The crossbar cleanup frees the media entity pads, but the subsequent v4l2 cleanup still tries to remove media links that reference those pads. Fix this by calling mxc_isi_v4l2_cleanup() before mxc_isi_crossbar_cleanup() to ensure all media entities are properly unregistered while the pads are still valid. | ||||
| CVE-2026-64453 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: misc: usbio: fix disconnect UAF in client teardown usbio_disconnect() walks usbio->cli_list in reverse and uninitializes each auxiliary device. auxiliary_device_uninit() drops the device reference, and for an unbound child that can run usbio_auxdev_release() and free the containing struct usbio_client. list_for_each_entry_reverse() advances after the loop body by reading client->link.prev. If the current client is freed by auxiliary_device_uninit(), the iterator dereferences freed memory. Use list_for_each_entry_safe_reverse() so the previous client is cached before the body can drop the final reference. This preserves reverse teardown order while keeping the next iterator cursor independent of the current client's lifetime. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in usbio_disconnect+0x12e/0x150 Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ? usbio_disconnect+0x12e/0x150 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x188/0x320 ? usbio_disconnect+0x12e/0x150 kasan_report+0xe0/0x110 ? usbio_disconnect+0x12e/0x150 usbio_disconnect+0x12e/0x150 usb_unbind_interface+0xf3/0x400 really_probe+0x316/0x660 __driver_probe_device+0x106/0x240 driver_probe_device+0x4a/0x110 __device_attach_driver+0xf1/0x1a0 ? __pfx___device_attach_driver+0x10/0x10 bus_for_each_drv+0xf9/0x160 ? __pfx_bus_for_each_drv+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? trace_hardirqs_on+0x18/0x130 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x44/0x60 __device_attach+0x133/0x2a0 ? __pfx___device_attach+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_raw_spin_unlock+0x9a/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 device_initial_probe+0x55/0x70 bus_probe_device+0x4a/0xd0 device_add+0x9b9/0xc10 ? __pfx_device_add+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x44/0x60 ? srso_alias_return_thunk+0x5/0xfbef5 ? lockdep_hardirqs_on_prepare+0xea/0x1a0 ? srso_alias_return_thunk+0x5/0xfbef5 ? usb_enable_lpm+0x3c/0x260 usb_set_configuration+0xb64/0xf20 usb_generic_driver_probe+0x5f/0x90 usb_probe_device+0x71/0x1b0 really_probe+0x46b/0x660 __driver_probe_device+0x106/0x240 driver_probe_device+0x4a/0x110 __device_attach_driver+0xf1/0x1a0 ? __pfx___device_attach_driver+0x10/0x10 bus_for_each_drv+0xf9/0x160 ? __pfx_bus_for_each_drv+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? trace_hardirqs_on+0x18/0x130 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x44/0x60 __device_attach+0x133/0x2a0 ? __pfx___device_attach+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_raw_spin_unlock+0x9a/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 device_initial_probe+0x55/0x70 bus_probe_device+0x4a/0xd0 device_add+0x9b9/0xc10 ? __pfx_device_add+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? add_device_randomness+0xb7/0xf0 usb_new_device+0x492/0x870 hub_event+0x1b10/0x29c0 ? __pfx_hub_event+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0x187/0x300 ? process_one_work+0x475/0xb90 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0xc8/0x290 ? srso_alias_return_thunk+0x5/0xfbef5 process_one_work+0x4d7/0xb90 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __list_add_valid_or_report+0x37/0xf0 ? __pfx_hub_event+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x2d8/0x570 ? __pfx_worker_thread+0x10/0x10 kthread+0x1ad/0x1f0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c9/0x540 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x2e9/0x730 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> | ||||
| CVE-2026-64470 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: fix use-after-free on marvell probe failure Make sure to stop any TX URBs submitted during Marvell OOB wakeup configuration on later probe failures to avoid use-after-free in the completion callback. This issue was reported by Sashiko while reviewing a fix for a wakeup source leak in the btusb probe errors paths. | ||||
| CVE-2026-17729 | 1 Google | 1 Chrome | 2026-08-03 | 8.8 High |
| Use after free in V8 in Google Chrome prior to 151.0.7922.72 allowed a remote attacker who had compromised the renderer process to potentially perform out of bounds memory access via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-67300 | 1 Freerdp | 1 Freerdp | 2026-08-03 | 7.5 High |
| FreeRDP before 3.29.0 contains client-side heap use-after-free vulnerabilities in the async update message proxy for RAIL WINDOW_STATE_ORDER and NOTIFY_ICON_STATE_ORDER when AsyncUpdate is enabled. When a malicious or compromised RDP server sends crafted update orders, the message proxy shallow-copies structures containing nested parser-owned pointers (e.g., titleInfo.string, windowRects, visibilityRects, icon buffers). The parser frees those nested buffers after the callback returns, so the queued async message later dispatches stale pointers, potentially causing memory corruption or a client crash. | ||||
| CVE-2026-64266 | 1 Linux | 1 Linux Kernel | 2026-08-02 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fuse: re-lock request before returning from fuse_ref_folio() fuse_ref_folio() unlocks the request but does not re-lock it before returning. fuse_chan_abort() can end the request and the async end callback (eg fuse_writepage_free()) can free the args while the subsequent copy chain logic after fuse_ref_folio() accesses them, leading to use-after-free issues. Fix this by locking the request in fuse_ref_folio() before returning. | ||||
| CVE-2026-64300 | 1 Linux | 1 Linux Kernel | 2026-08-02 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: perf/aux: Fix page UAF in map_range() map_range() reads rb->aux_pages[], rb->aux_nr_pages and rb->aux_pgoff via perf_mmap_to_page() while holding only event->mmap_mutex. Those fields are serialized by rb->aux_mutex, and mmap_mutex is per event. Thus, two events sharing one rb via PERF_EVENT_IOC_SET_OUTPUT can race rb_alloc_aux() with map_range(), leading to a page-UAF scenario as follows: CPU 0 CPU 1 ===== ===== rb_alloc_aux() map_range() [1]: allocate rb->aux_pages[0] [2]: rb->aux_nr_pages++ [3]: perf_mmap_to_page() returns rb->aux_pages[0] [4]: map it as VM_PFNMAP [5]: rb->aux_pgoff = 1 munmap the page [6]: free rb->aux_pages[0] Pages mapped as VM_PFNMAP have no refcount protection, so CPU 1 holds a mapping to a freed physical frame. Fix this by taking rb->aux_mutex across the page walk in map_range(). | ||||
| CVE-2026-64343 | 1 Linux | 1 Linux Kernel | 2026-08-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: ldusb: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked") | ||||